Note: I have already read through older questions like What is the best format for a customer number, order number? , however my question is a little more specific.
Generating pseudo-random numbers encounter the "birthday problem" before long. For example, if I am using a 27-bit field for my order number, after 15000 entries, the chances of collision increase to 50%.
I am wondering whether large ecommerce businesses like Amazon generates its order number in any other way - for example :
pre-generate the entire set and pick from them randomly (a few hundred GB of database)
Use lexicographical "next_permutation" starting from a particular seed number
MD5 or SHA-1 hash of the date, user-id, etc parameters, truncated to 14 digits
etc
All I want is a non-repeating integer (doesnt need to be very random except to obfuscate total number of orders) of a certain width. Any ideas on how this can be achieved ?
Suggest starting with the date in reverse format then starting at 1, followed by a check (or random) digit. If you are likely to never exceed 100 orders per day you need add two digits plus a check/random digit.
The year need include only the final two digits, possibly only the final digit, depending on how long you keep records of orders: 7 years or so is usually enough, meaning the records from 2009 (beginning with 9) could be deleted during 2018 in preparation to use the order numbers again in 2019. You could use mmdd for the next 4 digits, or simply number the days through the year and use just 3 digits - it depends how human-friendly you want the number to be. It's also possible just to omit the day of the month and restart the sequential numbers at the start of each month, rather than every day.
Today is 2 Nov 2017, let's suppose this is order no 16 today, your order no would be 71102168 (where the 8 is a check digit or random digit). If you're likely to have up to, but not exceeding a thousand, you'll need an extra digit, thus: 711020168. To avoid limiting yourself the number of digits, you might prefer to use a hyphen: 71102-168 … you could include another hyphen before the check/random digit if you wish: 71102-16-8.
If you have several areas dealing with orders, you may wish to include a depot number, perhaps at the beginning or after the date, allowing you to use the sequence numbers at each depot - eg depot 5 might be: 5-71102-168, 71102-5-168 or 711025168. Again, if you don't use hyphens, you'll need to assess whether you need up to ten, a hundred or a thousand (etc) possible depot numbers. I hope this helps!
This problem has been solved, why
not use the UUID. See RFC 4122. These are close enough to globally unique you can easily combine many systems and never ever have a duplicate just because the number space is so massive.
As much as I like using GUIDs as the unique identifiers in my system, it is not very user-friendly for fields like an order number where a customer may have to repeat that to a customer service representative.
What's a good algorithm to use to generate order number so that it is:
Unique
Not sequential (purely for optics)
Numeric values only (so it can be easily read to a CSR over phone or keyed in)
< 10 digits
Can be generated in the middle tier without doing a round trip to the database.
UPDATE (12/05/2009)
After carefully reviewing each of the answers posted, we decided to randomize a 9-digit number in the middle tier to be saved in the DB. In the case of a collision, we'll regenerate a new number.
If the middle tier cannot check what "order numbers" already exists in the database, the best it can do will be the equivalent of generating a random number. However, if you generate a random number that's constrained to be less than 1 billion, you should start worrying about accidental collisions at around sqrt(1 billion), i.e., after a few tens of thousand entries generated this way, the risk of collisions is material. What if the order number is sequential but in a disguised way, i.e. the next multiple of some large prime number modulo 1 billion -- would that meet your requirements?
<Moan>OK sounds like a classic case of premature optimisation. You imagine a performance problem (Oh my god I have to access the - horror - database to get an order number! My that might be slow) and end up with a convoluted mess of psuedo random generators and a ton of duplicate handling code.</moan>
One simple practical answer is to run a sequence per customer. The real order number being a composite of customer number and order number. You can easily retrieve the last sequence used when retriving other stuff about your customer.
One simple option is to use the date and time, eg. 0912012359, and if two orders are received in the same minute, simply increment the second order by a minute (it doesn't matter if the time is out, it's just an order number).
If you don't want the date to be visible, then calculate it as the number of minutes since a fixed point in time, eg. when you started taking orders or some other arbitary date. Again, with the duplicate check/increment.
Your competitors will glean nothing from this, and it's easy to implement.
Maybe you could try generating some unique text using a markov chain - see here for an example implementation in Python. Maybe use sequential numbers (rather than random ones) to generate the chain, so that (hopefully) the each order number is unique.
Just a warning, though - see here for what can possibly happen if you aren't careful with your settings.
One solution would be to take the hash of some field of the order. This will not guarantee that it is unique from the order numbers of all of the other orders, but the likelihood of a collision is very low. I would imagine that without "doing a round trip to the database" it would be challenging to make sure that the order number is unique.
In case you are not familiar with hash functions, the wikipedia page is pretty good.
You could base64-encode a guid. This will meet all your criteria except the "numeric values only" requirement.
Really, though, the correct thing to do here is let the database generate the order number. That may mean creating an order template record that doesn't actually have an order number until the user saves it, or it might be adding the ability to create empty (but perhaps uncommitted) orders.
Use primitive polynomials as finite field generator.
Your 10 digit requirement is a huge limitation. Consider a two stage approach.
Use a GUID
Prefix the GUID with a 10 digit (or 5 or 4 digit) hash of the GUID.
You will have multiple hits on the hash value. But not that many. The customer service people will very easily be able to figure out which order is in question based on additional information from the customer.
The straightforward answer to most of your bullet points:
Make the first six digits a sequentially-increasing field, and append three digits of hash to the end. Or seven and two, or eight and one, depending on how many orders you envision having to support.
However, you'll still have to call a function on the back-end to reserve a new order number; otherwise, it's impossible to guarantee a non-collision, since there are so few digits.
We do TTT-CCCCCC-1A-N1.
T = Circuit type (D1E=DS1 EEL, D1U=DS1 UNE, etc.)
C = 6 Digit Customer ID
1 = The customer's first location
A = The first circuit (A=1, B=2, etc) at this location
N = Order type (N=New, X=Disconnect, etc)
1 = The first order of this kind for this circuit
Every order in my online store has a user-facing order number. I'm wondering the best way to generate them. Criteria include:
Short
Easy to say over the phone (e.g., "m" and "n" are ambiguous)
Unique
Checksum (overkill? Useful?)
Edit: Doesn't reveal how many total orders there have been (a customer might find it unnerving to make your 3rd order)
Right now I'm using the following method (no checksum):
def generate_number
possible_values = 'abfhijlqrstuxy'.upcase.split('') | '123456789'.split('')
record = true
while record
random = Array.new(5){possible_values[rand(possible_values.size)]}.join
record = Order.find(:first, :conditions => ["number = ?", random])
end
self.number = random
end
As a customer I would be happy with:
year-month-day/short_uid
for example:
2009-07-27/KT1E
It gives room for about 33^4 ~ 1mln orders a day.
Here is an implementation for a system I proposed in an earlier question:
MAGIC = [];
29.downto(0) {|i| MAGIC << 839712541[i]}
def convert(num)
order = 0
0.upto(MAGIC.length - 1) {|i| order = order << 1 | (num[i] ^ MAGIC[i]) }
order
end
It's just a cheap hash function, but it makes it difficult for an average user to determine how many orders have been processed, or a number for another order. It won't run out of space until you've done 230 orders, which you won't hit any time soon.
Here are the results of convert(x) for 1 through 10:
1: 302841629
2: 571277085
3: 34406173
4: 973930269
5: 437059357
6: 705494813
7: 168623901
8: 906821405
9: 369950493
10: 638385949
At my old place it was the following:
The customer ID (which started at 1001), the sequence of the order they made then the unique ID from the Orders table. That gave us a nice long number of at least 6 digits and it was unique because of the two primary keys.
I suppose if you put dashes or spaces in you could even get us a little insight into the customer's purchasing habits. It isn't mind boggling secure and I guess a order ID would be guessable but I am not sure if there is security risk in that or not.
Ok, how about this one?
Sequentially, starting at some number (2468) and add some other number to it, say the day of the month that the order was placed.
The number always increases (until you exceed the capacity of the integer type, but by then you probably don't care, as you will be incredibly successful and will be sipping margaritas in some far-off island paradise). It's simple enough to implement, and it mixes things up enough to throw off any guessing as to how many orders you have.
I'd rather submit the number 347 and get great customer service at a smaller personable website than: G-84e38wRD-45OM at the mega-site and be ignored for a week.
You would not want this as a system id or part of a link, but as a user-friendly number it works.
Douglas Crockford's Base32 Encoding works superbly well for this.
http://www.crockford.com/wrmg/base32.html
Store the ID itself in your database as an auto-incrementing integer, starting at something suitably large like 100000, and simply expose the encoded value to the customer/interface.
5 characters will see you through your first ~32 million orders, whilst performing very well and satisfying most of these requirements. It doesn't allow for the exclusion of similar sounding characters though.
Rather than generating and storing a number, you might try creating an encrypted version that would not reveal the number of orders in the system. Here's an article on exactly that.
Something like this:
Get sequential order number. Or, maybe, an UNIX timestamp plus two or three random digits (when two orders are placed at the same moment) is fine too.
Bitwise-XOR it with some semi-secret value to make number appear "pseudo-random". This is primitive and won't stop those who really want to investigate how many orders you have, but for true "randomness" you need to keep a (large) permutation table. Or you'll need to have large random numbers, so you won't be hit by the birthday paradox.
Add checkdigit using Verhoeff algorithm (I'm not sure it will have such a good properties for base33, but it shouldn't be bad).
Convert the number to - for example - base 33 ("0-9A-Z", except for "O", "Q" and "L" which can be mistaken with "0" and "1") or something like that. Ease of pronouncation means excluding more letters.
Group the result in some visually readable pattern, like XXX-XXX-XX, so users won't have to track the position with their fingers or mouse pointers.
Sequentially, starting at 1? What's wrong with that?
(Note: This answer was given before the OP edited the question.)
Just one Rube Goldberg-style idea:
You could generate a table with a random set of numbers that is tied to a random period of time:
Time Period Interleaver
next 2 weeks: 442
following 8 days: 142
following 3 weeks: 580
and so on... this gives you an unlimited number of Interleavers, and doesn't let anyone know your rate of orders because your time periods could be on the order of days and your interleaver is doing a lot of low-tech "mashing" for you.
You can generate this table once, and simply ensure that all Interleavers are unique.
You can ensure you don't run out of Interleavers by simply adding more characters into the set, or start by defining longer Interleavers.
So you generate an order ID by getting a sequential number, and using today's Interleaver value, interleave its digits (hence, the name) in between each sequential number's digits. Guaranteed unique - guaranteed confusing.
Example:
Today I have a sequential number 1, so I will generate the order ID: 4412
The next order will be 4422
The next order will be 4432
The 10th order will be 41402
In two weeks my interleaver will change to 142,
The 200th order will be 210402
The 201th order will be 210412
Eight days later, my interleaver changes to 580:
The 292th order will be 259820
This will be completely confusing but completely deterministic. You can just remove every other digit starting at the 1's place. (except when your order id is only one digit longer than your interleaver)
I didn't say this was the best way - just a Friday idea.
You could do it like a postal code:
2b2 b2b
That way it has some kind of checksum (not really, but at least you know it's wrong if there are 2 consecutive numbers or letters). It's easy to read out over the phone, and it doesn't give an indication of how many orders are in the system.
http://blog.logeek.fr/2009/7/2/creating-small-unique-tokens-in-ruby
>> rand(36**8).to_s(36)
=> "uur0cj2h"
How about getting the current time in miliseconds and using that as your order ID?
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
A large international company deploys a new web and MOTO (Mail Order and Telephone Order) handling system. Among other things you are tasked to design format for both order and customer identification numbers.
What would be the best format in your opinion? Please list any assumptions and considerations.
Accepted Answer
Michael Haren's answer selected due to the most up votes, but please do read other answers and comments as they make Michael's answer more complete.
Go with all numbers or all letters. If you must mix it up, then make sure there are no ambiguous characters (Il1m, O0, etc.).
When displayed/printed, put spaces in every 3-4 characters but make sure your systems can handle inputs without the spaces.
Edit:
Another thing to consider is having a built in way to distinguish orders, customers, etc. e.g. customers always start with 10, orders always start with 20, vendors always start with 30, etc.
DON'T encode ANY mutable customer/order information into the numbers! And you have to assume that everything is mutable!
Some of the above suggestions include a region code. Companies can move. Your own company might reorganize and change its own definition of regions. Customer/company names can change as well.
Customer/order information belongs in the customer/order record. Not in the ID. You can modify the customer/order record later. IDs are generally written in stone.
Even just encoding the date on which the number was generated into the ID might seem safe, but that assumes that the date is never wrong on the systems generating the numbers. Again, this belongs in the record. Otherwise it can never be corrected.
Will more than one system be generating these numbers? If so, you have the potential for duplication if you use only date-based and/or sequential numbers.
Without knowing much about the company, I'd start down this path:
A one-character code identifying the type of number. C for customers, R for orders (don't use "O" as it could be confused with zero), etc.
An identifier of the system that generated the number. The length of this identifier depends on how many of these systems there will be.
A sequence number, unique to the system generating it. Just a counter.
A random number, to prevent guessable order/customer numbers. Make this as long as your paranoia requires.
A simple checksum. Not for security, but for error checking.
Breaking this up into segments makes it more human-readable as others have pointed out.
CX5-0000758-82314-12 is a possible number generated by this approach
. This consists of:
C: it's a customer number.
X5: the station that generated the number.
0000758: this is the 758th number generated by X5. We can generate 10 million before retiring this station ID or the station itself. Or don't pad with zeros and there's no limit.
82314: this was randomly generated and results in a 1/100,000 chance of guessing a customer ID.
12: checksum.
A primary advantage of using only numbers is that they can be entered much more efficiently using 10-key.
The length of that number should be as short as possible while still encompassing the entire entity space you expect to catalog with room to spare. This can be tricky and should be given a bit of thought. A little set theory can give you the number of unique keys you will have access to, given a group of elements.
It is natural when speaking, to break numbers up into sets of two to four digits. By inserting dashes in some pattern, you can "force" the customer to repeat them in a more efficient and unambiguous manner.
For instance, 323-23-5344, which, of course, is social security number format, helps to inform the speaker where to pause when vocalizing the number. It also provides a visual delineation when writing the number and makes it easy to compare when copying the number.
I second the recommendation that the ordering system masks the input correctly so that no dashes need to be entered at any time. This should be carried through to printed forms to provide a clear expectation of what should be entered. For instance, a printed box for each digit separated by printed dashes.
I disagree that too much information should be embedded in this number especially if those attributes might change. For instance, say we give "323" the meaning of "is a nice customer" but then they call in four times with an attitude. Are we then going to change their customer key to "324", "is a jerk"? What if they are in region 04 and move their company to region 05?
If that happens, your options will be to update that primary key throughout the database or live with the ambiguity that the information embedded in that key is no longer reliable, thus rendering all of the information embedded in the keys of questionable utility.
It is better to store attributes that may change as separate fields in the database and have the customer number be a unique, unchanging key for that customer.
To build on Daniel and Michael's questions: it's even better if the separated numbers MEAN something else. For example, I worked for a company where account numbers were like this:
xxxx-xxxx-xxxxxxxx
The first set of numbers represented the region and the second set represented the market within that region. Once you got used to knowing what numbers were from were, it made it really easy to tell what area an account was in without even having to look at the customer's account.
There are several assumptions that I make when answering this question; some are based on the fact that it is a large international organization, and some are based on the fact that the format is for two separate table types.
Assumptions based on the fact that it's an international organization:
It is probable that each region will need to operate independently -- that is, region A must be able to add customer numbers independently from region B
Each region probably uses a different language so to make the identifiers easily type-able by users around the world, it is best to stick to numbers and spaces only.
Assumptions based on the fact that there are two tables for which this format will be used:
This format may be used by more than the two tables listed, so it should be able to handle an arbitrarily large number of tables.
Experienced users should be able to know what type of identifier they are looking at based on information encoded into the identifier itself.
It would be nice if identifiers were globally unique within the entire system.
Considerations:
For a global company, identifiers can be very long if only numerics are used. We should attempt to limit the amount of extraneous information encoded into the identifier as much as possible.
Identifiers should be self-verifiable to a limited extent; that is a program should be able to detect a large percent of invalid identifiers without looking anything up at all. This implies a checksum.
Proposed format:
SSSS0RR0TTC
The format proposed is as simple as possible, but no simpler:
C The first (rightmost) character will be a checksum of all other characters in the identifier. A simple checksum will do. This will eliminate 90% of all typing errors. If it is decided that this is not enough, then this can be expanded to 2 digits which will eliminate 99% of all typing errors.
TT The next N digits represent the table type number. No table type number can contain the digit zero.
The next digit is a zero. This zero separates the table type number from the region number.
RR The next N digits are the region number. No region numbers can contain a zero.
The next digit is a zero. This zero separates the region from the sequence number.
SSSS The next N digits are the sequence number. This number can contain zeros.
Each set of four numbers are separated by spaces when printed or typed in by convention. Internally they are not separated, but this helps the user transfer them correctly.
Examples
Assuming:
Customer table type=1
Order table table type=2
Region code for US-Alabama=1
Region code for CA-Alberta=43
Region code for Ethopia=924
10 1013 - Customer #1 in Alabama (3 is the checksum: 1 +1 + 1)
10 1024 - Order #1 in Alabama
9259 0304 3016 - customer # 925903 in Alberta, Canada
20 3043 4092 4023 - order number 2030434 in Ethopia
Advantages of this approach:
90% of mistyped numbers will be caught
There are an unlimited number of table types
There are an unlimited number of regions
There are an unlimited number of sequential numbers for each table
Identifier numbers are globally unique to the system. This is important - a customer number cannot be mistaken for an order number and visa versa.
Each region can independently add sequence numbers without a global key
Disadvantages
Each identifier is at least six characters
table types numbers and region numbers cannot contain a zero because the zero is used to separate the sequence number from the region number from the table type number.
Make the number as long as necessary, but not any longer. Every time I pay my water bill, I have to enter my 20-digit customer number, and an 18-digit invoice number. Thankfully, a dash in my customer number separates it into two parts.
Do not depend on leading zeros. Having to figure out how many zeros are in my invoice number is extremely annoying. Take 000000000051415432 for example. Their system won't recognize just 51415432.
Group digits together. If you absolutely have to use long numbers, four-digit chunks should work well.
I would never use user information in IDs. Suppose you use the first letters of the customer's last name followed by some number: e.g. Thomsom could be customer THOM-0001.
Only, it appears you made a mistake, and the man's name is Tomson instead of Thomson. User data can be corrected, IDs should never be modifiable. So next time you look up Tomson under TOMS-... you can't find him. Same with other data, like a customer type. It can always change, the ID can't.
This is very basic to RDBMS.
Simply use counting numbers. For readability it's a good idea to insert separators such that you never have more than 4 successive digits: 9999-9999 is better than 999-99999. And don't make the number longer than necessary; people are much more annoyed by being reduced to a 20 digit number than just being reduced to a number.
There's a catch, though. Especially if you have a small business simple counters can give more away than you would appreciate. Say I order something from you, and the order number is 090145. Next month I order again, and the order number is 090171. Er.. 26 orders in a month? Same, I wouldn't feel comfortable to become customer 0006 in a business which has been active for 10 years.
The solution is simple: skip numbers. Don't use random numbers, because you still want them to be in sequence.
I would have my order numbers follow this format:
ddmmyyyy-####-####
Where ####-#### resets to zero at the beginning of every day. This makes it very easy to correlate orders with the date it was placed.
For customer IDs, I would mix capital letters and numbers, but as Michael said avoid commonly mistaken letters (0,o,L,1,5,s). This will give you 30 characters to deal with. If you use 20 characters, that will give you almost a 64 bit range of customer IDs -- pretty good for security. Make sure you use a secure random number generator when generating ID. As for how you display the format, it should be the following:
####-####-####-####-####
As Michael said again, make sure your system can deal with dashes, spaces, no spaces, or no dashes. (It should just strip all those characters from the input before validation.)
I hope that helps!
You may add a small checksum (using XOR for instance) to ensure (enhance) correctness of given ids.
If it's by mail, consider z-base-32 encoding. But here, with telephone orders, you may prefer decimal identification.
assuming that the creation of orders/customers is not centralized, or will not always be centralized, use a GUID
if the creation of orders/customers will always be centralized, an unsigned integer would be fine
there is no compelling reason for the order number of customer number to "mean" anything, and it is likely that any segmented number scheme invented will have to be overhauled down the road. Stick to something unique and meaningless.
EDIT: for MOTO, any multi-character alphabetical identifier will cause problems over the phone, so GUIDs are right out. Assuming multiple decentralized MOTO locations, assign each MOTO location a prefix (A, B, C, etc., or 01, 02, ...) and use an integer or big-integer for the customer and order IDs, e.g. 01-1 is the first order from MOTO location #1. Note that zero-padding is unnecessary, imposes an implicit digit limit to the numbers, and requires the customer to distinguish between six zeros and seven zeros when speaking the number. If you must use a padded fixed-length format, break the number up into groups of no more than 4 or 5 digits each.
ADDENDUM: the order number and the customer number do not have to be the primary keys of their respective tables, just unique indexed columns for lookup. You'll probably want to use something simpler/more efficient for the primary keys in the database.
We use leading zeroes for some of our references "numbers" where I work and I can't tell you how many wasted hours I've had over the last seven years forcing Excel to treat them as text. Don't do it.
Auto-incrementing integers are all well and good for computers, but they greatly reduce human beings ability to spot errors. How important that is will depend on your business. I work with property (housing) related data and our primary reference has the front door embedded in it. It's not elegant but it means that experienced admin staff can spot 90% of minor errors (when we get invoices, etc in) before they get near a database. But in an environment where you're not relying on that kind of process this argument is less compelling.
(Now, some folks have strongly warned about using meaningful data in references as it could be changed, and there's some truth in that, but you can be smart. You don't have to pick something obviously fickle like whether the person is married - you can anchor yourself on past events like a character representing the region they first opened a particular account. Even if you don't do that, have some kind of pattern to help communication with customers. I've worked in a number of call centres and people sometimes come to phone with every piece of documentation from birth certificate onwards as they desperately try to find their account/order/customer number. I don't think saying "It'll be a number between 1 and 100 trillion" would be very handy)
It's been said, but don't create enormously long references. We're busy people, we haven't got time to be keying in this crap over a phone system and making a mistake on digit 17 only to restart (again). Some of your customers may have disabilities and it's likely a growing number will be over 55+. Once again, watch out for the zeroes. You see purchase order numbers and the like with fourteen digits. How many orders do they think they're going to be placing?
If there's going to be any data aggregation outside of your network (and thus not connected to your database) - have some sort of check digit/regular expression pattern which your partners/suppliers can verify they've not made mistakes. One example of this is the UK's electrical supply numbering system (MPAN) is a good example of this - designed for people to maintain their own records without having to download the big list of every electricity meter in the universe to check they've not made a typo.
I would use numbers only since it is an international company. I would use spaces or dashes every 4-6 numbers to separate it. I would also keep the format separate for quick identification
Example:
000-00000-00000 - could be an customer number
00000-00000-00000-00000 - could be a order number
Stick to numbers (no chars or special stuff):
Can be easily input in an IVR flow
its international - No language hassles
No confusion in chars vs. numbers - O vs. 0, I vs. 1
As long as leading 0 is meaningless, you can store/manipulate them more effectively
I would use a completely numeric systems for both Order Number and Customer Number, this will allow you to avoid issues with other languages.
Avoid leading zeros, as this can cause issues with data entry and validation.
The number of digits for each will be dependent on your expected volume. You will always have a greater number of Order Numbers than Customer Numbers. A six digit Customer number starting at 100000 will still give you 899,999 customers. Add an additional 3-4 digits for the order number, will give you 999 to 9,999 orders per customer (more if you consider one off customers).
There is no need to build any sort of identification into your numbering sequence. You have other database fields to identify where a customer is from, etc. Do not overly complicate your system.
KISS (keep it simple stackoverflow)
I would suggest using 16 digit identifiers that when printed or shown to customers are formatted in the format of xxxx-xxxx-xxxx-xxxx but stored as numbers without the dashes in your system.
The reason for using this format is that it makes it easier for people reading out the number over to phone to read as they can do it in batches of 4 rather then trying to remember how much they have said already.
If you wish the first 4 digits can be used to identify the type of number, 1000 for customers, 2000 for suppliers, 3000 for orders, 4000 for invoices etc.
The second set can then by a year/month identifier if you wish to keep that sort of information encoded in the number itself, using a format of yymm so 1000-0903-xxxx-xxxx would be a customer entered in march 2009.
This then leaves you with 8 digits for the actual data itself.
I would consider the use of letters in the identifiers to be a very bad idea for any system that deals with telephones as the differences in accents and understand is so varied that people are bound to get upset at trying to get their identifier recognised by someone who cannot understand their accent properly.
An additional consideration to the format issue- in the code, create a separate class for OrderId and CustomerId. These classses are immutable, and validate their input to ensure that they are acceptable IDs. Also, no value could be and order ID and a customer ID.
The simplest approach would just be to have the backing values for OrderId be ints that start with 1, and CustomerIds be ints that start with 2, or something similar.
Wow - what a simple yet revealing question! And what a lot of contradictory answers. I think there are 3 obvious candidate answers here:
1) Use an autoincrementing long integer.
2) Use a GUID
3) Use a compound type that includes other information in the ID.
For simpler systems, and especially web based systems where all users are hitting a central database, (1) works well. It has the advantage that numbers stay as short and simple as possible, but no shorter, avoids alphabetic characters (you would be amazed how different the names for the same letters are in different countries - one countries E is another countries I). It does not differentiate the order ID from the customer ID intrinsically, but you could always prepend or append a "C" or "O" to each and silently drop them on entry?
It also does not have a checksum or error check.
For distributed systems where many software components need to create the numbers on the fly, without reference to a master database (2) is the only way to go. They have the advantage of being largely error checking, since the address space is so large, but by the same token, are too long and alphanumeric to comfortably read over the telephone.
As for (3) - embedding region information or today's date into the number - those are the sorts of ideas that experienced developers train themselves out of. Looks like a good idea at first, but always comes back to haunt you. Consider the case where a customer moves to a new state, or an order is manually rekeyed a week after originally issued? These items of information belong in related tables where they can be edited independantly of the ID which should represent the entities identity only.
To repeat: NEVER ENCODE BUSINESS DATA IN AN ID OR PRIMARY KEY - every time you do that you leave a time bomb for others to clean up one day.
Given that this is a centralised (phone based) system I would go with option (1) until a clear need arose to change. Simpler is usually better. Insert hyphens as others suggest and prepend or postpend a checksum and/or identifying letter if required.
First step: in an org sufficiently large to require such a system, there is an existing system that you're replacing. Continue the previous system's scheme, if possible. It makes a lot of things easier if you can access, even at a basic level, the data from the old system.
That said, there's often a good reason to change the scheme, particularly when it's coming from a legacy system. i find, though, that it's often helpful to formally rule out the old scheme before proceeding.
Second step: systems like this never exist in a vacuum. Is there already an organization-wide scheme for user and/or order IDs, such as in the accounting, inventory management, or CRM system? If so, consider adopting the existing schemes to make interoperability easier. Many large orgs have multiple ways to specify a single customer or order, and it just makes getting useful intelligence out of the data that much harder.
Third step: if the old system's scheme is too awful to continue and there's no other scheme to adopt, roll your own. In this case, look at the shortcomings of the original scheme, whatever they are, and correct them. The right answer will depend on the specific requirements of the application. The problem statement you've given us is too vague to speculate usefully on what the final form might look like.
I always stick with auto-increment numbers, and I always seed the sequence high enough so that they will all have a consistent number of digits - seems to be less confusing.
I also sometimes start an order number, say 6 digits, starting at 200,000 and customer numbers at 5 digits, starting at 10,000 which would for example give me 90,000 unique customer numbers and 800,000 unique order numbers to use, and you could always tell just by looking at it whether it was a customer number or an order number. (i.e. so if a customer rep was asking for a number over the phone it would immediately be obvious which was which)
I would not however build logic in the app that would depend on that, so even if it did roll over, the system wouldn't care.
The biggest issue here is to try not to overthink the problem.
Although I'm more experienced in e-commerce systems I think some of the points made in this post could be applied to mail order and telephone order systems.
For orders, an auto-increment integer works perfectly as the primary key in the database as well as the number that the customer will see on his/her invoice. There is absolutely no reason to create some overcomplicated algorithm for your numbers. If you want to tell which country/region they're from use a separate field in your database. Also if you are concerned about your competitors spying on you; let them! If your business revolves around spying on your competitors because you're not generating enough revenue then most likely your businessidea isn't good in the first place. Also if you wanted to fool your competitor you could just create your own script that will autocreate fake orders. If your e-commerce system is well designed then this won't be an issue.
Key stuff using an auto-increment integer:
All numbers/digits => easier to communicate, no ambiguities over the phone, works for all languages/cultures that use 0-9 as their numerical system
No extra coding
Looks nice on the invoice and it's the shortest possible number of digits a customer would ever need to spell out over the phone
Works for small AND large businesses
It's scalable
Serviceminded/Customerminded (What's best for the customer) (se bullets 1 and 3)
Simple
Whenever or whatever you're designing should always begin with what's best for the customer. At the end of the day they are the ones putting food on your table. A happy customer is a returning customer.
For me, my preferred is getting the combination of date + a counter for today's transaction. I was challenged to come up with only 5 digit order number. So with that, I come up with the following below:
I have to get the current date then
get the current counter for today's transaction then add 1.
I decided to use a counting larger than decimal(10), so i use base 16 for counting. So with that, if i will get the max of 5 digit out of hexadecimal(FFFFF) that will be 1,048,575 counts. By involving the date, I can say I can get 1,048,575 counts per day. So to make that count unique every day, I mixed the date by getting the sum of the following:
Current Year count starting from the year of the implementation which is 1
Current hour(max is 24)
Current day of the year(max is 365)
So with that, I will have a max 3 characters start for my counting. So that will be XXX + Todays current transaction. Example:
Current Date:
2014-12-31 01:22 PM
Implementation date: 2010
Running total for today's transaction: 100
Count: (5 + 13 + 365) + 101 = 383101
Order Number: AD-5D87D
AD there is just a custom order number prefix. So by the time i will be out of order number that will 1000000 years from the time of my implementation date.
Anyway, this is not a good solution if you think your transaction per day can be high as 1000000 counts.