Having used optional parameters in a few classes here and there, I'm starting to dislike them immensely for the trouble they cause in certain cases with overload resolution, i.e. difficulties in binding delegates to them due to signature conflicts, as well as dynamic invocation problems with regard to method argument count.
How can I search in all files in my Visual Studio IDE (2010) project and locate all optional parameter usage? Would there be a clever regex I could use perhaps? Or perhaps using an older version of Visual Studio where optional parameters are not supported? I'm trying to avoid the hassle of manually scanning files in the project as it can be tiresome and error-prone. Thanks!
Your best bet may be reflection - it should be easy enough to loop through all members of all types where they are methods and they have at least one optional parameter.
That wouldn't do the substitution for you, but could give you a list of all offending members.
Something like:
foreach (Type tp in currentAssembly.GetTypes())
foreach (MethodInfo func in tp.GetMethods())
if(func.GetParameters().Any(p=>p.IsOptional))
Console.WriteLine(func.ToString());
Whilst this isn't probably the best way I tend to look at the Class View in visual studio. The types that are shown in square brackets are the optional parameters
I'm looking into writing an addin (or package, if necessary) for Visual Studio 2005 that needs watch window type functionality -- evaluation of expressions and examination of the types. The automation facilities provide
Debugger::GetExpression, which is useful enough, but the information
provided is a bit crude.
From looking through the docs, it sounds like an
IDebugExpressionContext2 would be more useful. With one of these it
looks as if I can get more information from an expression -- detailed
information about the type and any members and so on and so forth, without having everything come through as strings.
I can't find any way of actually getting a IDebugExpressionContext2,
though! IDebugProgramProvider2 sort of looks relevant, in that I
could start with IDebugProgramProvider2::GetProviderProcessData and
then slowly drill down until reaching something that can supply my
expression context -- but I'll need to supply a port to this, and it's
not clear how to retrieve the port corresponding to the current debug
session. (Even if I tried every port, it's not obvious how to tell
which port is the right one...)
I'm becoming suspicious that this simply isn't a supported use case, but with any luck I've simply missed something crashingly obvious.
Can anybody help?
By using IDebugExpressionContext you'll ultamitely end up getting ahold of an instance of IDebugProperty. This interface is implemented by the Expression Evaluator service. This is, typically, a language specific service. It's designed to abstract out the language specific details of evaluating an expression. It understands much higher level commands like "Evaluate", and inspection.
I don't think you're going to get what you're looking for though because you can't get ahold of any kind of type object this way. Nearly all of the inspection methods return their results in String form. For example you won't get the type Int32 but instead the string "int". This makes type inspection next to impossible.
I don't believe what you're trying is a supported case. The type system being evaluated doesn't exist in the current process. It exists in the debuggee process and is fairly difficult to get access to.
There's a hack you could do to get more information about the type of a variable you've evaluated using Debugger::GetExpression method.
You could evaluate "AppDomain.CurrentDomain.GetAssemblies()" to get all the assemblies loaded into the debugee, and cache them in your add-in. You may also need to listen for new assemblies being loaded onto the AppDomain.
Then, run the following:
Expression myExpression = Debugger.GetExpression(...);
Expression typeRefExpression = Debugger.GetExpression("typeof(" + myExpression.Type + ").FullName"
once you have the TypeFullName, you can search inside your assemblies cache for a matching System.Type, and once you have that, you can dig into it all you want using the standart Reflection API.
Note that this will only work in C#, because of its "typeof" keyword. You'll have to use a different keyword for VB.Net, for example.
Very simple question that is apparently impossible to find a decent answer to: How can I make Visual Basic 6 stop changing my ^##*ing variable casing!?!
I know that the general opinion of a great many VB users is that this "feature" is actually quite helpful, but I doubt that they use it much with any source control system. This is absolutely INFURIATING when you are trying to collaborate on a project of any significant size with several other developers. If ignored, you produce thousands of false-positive "changes" to your files (even ones with no actual code changes!) that pollute the revision history and make it near impossible in some cases to locate the actual change that took place.
If you don't ignore it (like my office, where we have been forced to implement a "no unneeded case change" policy), you spend 5x the time you would normally on each commit because you have to carefully revert out VB's "corrections" on every file, sometimes reverting hundreds of lines to put in a one line change.
Surely there must be a setting, plugin, hack, etc. out there that can remove this unwanted "feature"? I am willing to take any method I can get as long as it doesn't require me to pick through piles of phantom diffs. And to squash a couple of complaints up front: No, I can't turn off case detection in my diff tool, that's not the point. No, we can't just make the case changes globally. We're working with hundreds of thousands of LOC being worked on by multiple developers spanning many years of development. Synchronizing that is not feasible from a business standpoint. And, finally: No, we cannot upgrade to VB.net or port to another language (as much as I would love to).
(And yes, I am just a tiny bit peeved at the moment. Can you tell? My apologies, but this is costing me time and my company money, and I don't find that acceptable.)
Depending on your situation adding
#If False Then
Dim CorrectCase
#End If
might help.
Here is a real world scenario and how we solved it for our 350k LOC VB6 project.
We are using Janus Grid and at some point all the code lines which referenced DefaultValue property of JSColumn turned to defaultValue. This was an opportunity to debug the whole IDE nuisance.
What I found was that a reference to MSXML has just been added and now the IDE picks up ISchemaAttributes' defaultValue property before the Janus Grid typelib.
After some experiments I found out that the IDE collects "registered" identifiers in the following order:
Referenced Libraries/Projects from Project->References in the order they are listed
Controls from Project->Components (in unknown order)
Source Code
So the simple fix we did was to create a dummy class/interface with methods that hold our proper casing. Since we already had a project-wide typelib we referenced from every project before anything other typelib, this was painless to do.
Here is part of the IDL for our IUcsVbIntellisenseFix interface:
[
odl,
uuid(<<guid_here>>),
version(1.0),
dual,
nonextensible,
oleautomation
]
interface IUcsVbIntellisenseFix : IDispatch {
[id(1)] HRESULT DefaultValue();
[id(2)] HRESULT Selector();
[id(3)] HRESULT Standalone();
...
}
We added a lot of methods to IUcsVbIntellisenseFix, some of them named after enum items we used to misspell and whatever we wanted to fix. The same can be done with a simple VB class in a common library (ActiveX DLL) that's referenced from every project.
This way our source code at some point converged to proper casing because upon check-out the IDE actually fixed the casing as per IUcsVbIntellisenseFix casing. Now we can't misspell enums, methods or properties even if we try to.
SIMPLE WAY: Dim each variable in the case that you want. Otherwise, VBA will change it in a way that is not understandable.
Dim x, X1, X2, y, Yy as variant
in a subroutine will change ALL cases to those in the Dim statement
I can sympathise. Luckily we're allowed to turn off case sensitivity in our version control diff tool!
It seems the VB6 IDE automatic case-correction occasionally changes case in variable declarations and references, perhaps depending on the order in which modules are listed in the VBP file? But the IDE doesn't tell you that the file needs to be saved. So the problem only shows up when you saved the file because of another edit. We briefly tried to prevent this by checking out all the files in a project and setting the case carefully, but it didn't go away.
I suppose you could list the variable names that are affected - the usual suspects are one letter names like "I", "X" and "Y", perhaps because they are used in standard event handlers like MouseDown. Then write an add-in that'll search for all declarations " As" and force the case to upper. Run the add-in on your modules before you check them in. You might be able to trigger the add-in to run automatically when you save in VB6.
EDIT: Something I've just thought of: adapt Fred's answer. From now on, every time you check in a file, add a block at the top to establish canonical case for the usual suspects. If nothing else, it's easier than reverting hundreds of lines by hand. Eventually you will have this block in every file & maybe then the problem will stop happening.
#If False Then
Dim I, X, Y ' etc '
#End If
I standardised the case across the codebase, normally by using the examples above (Dim CorrectCase), and removing it again.
I then triggered VB to save EVERY file, by doing a case sensitive search/replace of "End" with "End" (no functional change, but enough to get VB to resave).
Once that was done, I could then do a single commit to standardise the case, making it MUCH easier to keep on top of it at a later date.
In this example VB6 was changing the case of the following line following a typo I made when referencing a library: -
Dim MyRecordset As ADODB.REcordset
Ugly, and now every other instance of an ADODB.REcordset thus acquired the new misspelling. I fixed this as follows: -
Type in a new declaration as follows
Dim VB6CasingSucks AS ADODB, Recordset
Note the comma and space after ADODB. Hit [ENTER] for VB6 to check the line.
At this point all instances of REcordset change back to Recordset.
Delete your new declaration.
I don't know if this fix will help with enums/other variable names.
Specifically for controlling the case of enum values, there is a VB6 IDE add-in which may be helpful. Enums seem to have a slightly unique version of this problem.
As described in the link below:
The VB6 IDE has an annoying quirk when it comes to the case of Enum
members. Unlike with other identifiers, the IDE doesn't enforce the
case of an Enum member as it was declared in the Enum block. That
occasionally causes an Enum member that was manually written to lose
its original case, unless a coder typed it carefully enough.
...
However, if a project contains a lot of Enums and/or a particular Enum
has a lot of members, redeclaring the members in each of them can get
quite tedious fast. ...
Ref: http://www.vbforums.com/showthread.php?778109-VB6-modLockEnumCase-bas-Enforce-Case-of-Enums
...load and unload the add-in as needed via the Add-In Manager
dialog box. Usage is as simple as selecting the entire Enum block,
right-clicking and then choosing the "Lock Enum Case" context menu
item.
I have a similar problem:
in a bas module there I wrote :
Private sub bla_bla()
Dim K as integer
End Sub
so in a class module the Dim k as integer will automatically be replaced by IDE become 'Dim K as integer' <-- it's not logical but then:
I correct the bas module become:
Private sub bla_bla()
Dim k as integer
End Sub
then magically the problem in the class module was solved (still be k and not automatically replaced by IDE become K). Sorry I'm poor in English
I don't think there's any to do it. The IDE will change the case of the variable name to whatever it is when it's declared. But, honestly, back in the day I worked on several large VB6 projects and never found this to be a problem. Why are people on your development team constantly changing variable declarations? It seems like you have not established a clear variable naming policy that you enforce. I know your upset, so no offense, but it might be your policies that are lacking in this regard.
Unfortunately, according to this SO thread, alternate VB6 IDEs are hard to come by. So, your best bet is to solve this problem via policy. Or move to VB.NET. :)
Wow. I've spent a lot of time programming in VB6 and I have no idea what you're on about. The only thing I can think you're referring to is that intellisense will change the capitalization of variable names to match their declarations. If you're complaining about that, I would have to wonder why the hell they've been entered any other way to begin with. And if that is your problem, no, there's no way to disable it that I'm aware of. I'd suggest you, in one go, check out every file, make sure the caps on the declarations and uses of variables all match and check back in.
I have a VS project with an IntermediateDirectory like this: "....\temp\$(SolutionName)\$(ProjectName)".
I can read this value using a macro or add in, however, I would need the actual directory to manipulate files there. Right now, I manually replace the "$(SolutionName)" and "$(ProjectName)" with the respective values, which works fine but might become complicated when different macros or even user macros from property sheets are used.
So my question is:
Does the Visual Studio API have a built in function to expand macros like these? Or is there some other elegant solution?
There is an elegant solution! But I only know the one that applies to C++ projects.
Assuming you're in a C# add-in:
// Get the main project from the first startup project
VCProject vcMainProject = (VCProject)(_applicationObject.Solution.SolutionBuild.StartupProjects as IVCCollection).Item(1);
Project mainProj = (Project)_vcMainProject .Object;
// Get the configuration we'll be using
IVCCollection cfgs = (IVCCollection)_vcMainProject .Configurations;
VCConfiguration vcCfg = (VCConfiguration) cfgs.Item(mainProj.ConfigurationManager.ActiveConfiguration.ConfigurationName + "|" + mainProj.ConfigurationManager.ActiveConfiguration.PlatformName);
string finalString = vcCfg.Evaluate("....\temp\$(SolutionName)\$(ProjectName)");
You can also check out this page:
http://msdn.microsoft.com/en-us/library/czt44k0x%28VS.71%29.aspx
If you're not using this for C++, there should be a similar interface for the Project, Configuration, and Solution classes provided for other languages (C# and VB).
As far as i know, there is no API available that will expand those macro values. Although it shouldn't be too hard to write a quick and dirty implementation that deals with only the values that you care about.
For instance, in this case you only care about 2 values (SolutionName and ProjectName). If these are the values you are primarily interested in use a simple search and replace with the best values.
Yes this is a sub-optimal solution. But it may help to unblock your progress.
Are there any tools that augment/replace intellisense with a search of for expressions that will result in a given type?
I'm thinking of the case where I need to get some particular object and I known the type and will recognize the name but don't know what sequence of objects to jump thought to get to it. Such a tool would do a breadth first search of all options and list anything that has the correct type.
This is an old question, I know, but I'm giving it a shot in case you didn't find anything. Intellisense has the Resolve option (from at least Visual Studio 2005), with which you type your particular object straight, and then with right-clicking you can choose Resolve, which will add the library required to the list at the top of your class.
Similarly, ReSharper might have something fancier for you.