How to simulate the environment cron executes a script with? - bash

Question

I normally have several problems with how cron executes scripts as they normally don't have my environment setup. Is there a way to invoke bash(?) in the same way cron does so I could test scripts before installing them?

Answer 1

Add this to your crontab (temporarily):
* * * * * env > ~/cronenv
After it runs, do this:
env - `cat ~/cronenv` /bin/sh
This assumes that your cron runs /bin/sh, which is the default regardless of the user's default shell.
Footnote: if env contains more advanced config, eg PS1=$(__git_ps1 " (%s)")$, it will error cryptically env: ": No such file or directory.

Answer 2

Cron provides only this environment by default :
HOME user's home directory
LOGNAME user's login
PATH=/usr/bin:/usr/sbin
SHELL=/usr/bin/sh
If you need more you can source a script where you define your environment before the scheduling table in the crontab.

Answer 3

Couple of approaches:
Export cron env and source it:
Add
* * * * * env > ~/cronenv
to your crontab, let it run once, turn it back off, then run
env - `cat ~/cronenv` /bin/sh
And you are now inside a sh session which has cron's environment
Bring your environment to cron
You could skip above exercise and just do a . ~/.profile in front of your cron job, e.g.
* * * * * . ~/.profile; your_command
Use screen
Above two solutions still fail in that they provide an environment connected to a running X session, with access to dbus etc. For example, on Ubuntu, nmcli (Network Manager) will work in above two approaches, but still fail in cron.
* * * * * /usr/bin/screen -dm
Add above line to cron, let it run once, turn it back off. Connect to your screen session (screen -r). If you are checking the screen session has been created (with ps) be aware that they are sometimes in capitals (e.g. ps | grep SCREEN)
Now even nmcli and similar will fail.

Answer 4

You can run:
env - your_command arguments
This will run your_command with empty environment.

Answer 5

Depending on the shell of the account
sudo su
env -i /bin/sh
or
sudo su
env -i /bin/bash --noprofile --norc
From http://matthew.mceachen.us/blog/howto-simulate-the-cron-environment-1018.html

Answer 6

Answering six years later: the environment mismatch problem is one of the problems solved by systemd "timers" as a cron replacement. Whether you run the systemd "service" from the CLI or via cron, it receives exactly the same environment, avoiding the environment mismatch problem.
The most common issue to cause cron jobs to fail when they pass manually is the restrictive default $PATH set by cron, which is this on Ubuntu 16.04:
"/usr/bin:/bin"
By contrast, the default $PATH set by systemd on Ubuntu 16.04 is:
"/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
So there's already a better chance that a systemd timer is going to find a binary without further hassle.
The downside with systemd timers, is there's a slightly more time to set them up. You first create a "service" file to define what you want to run and a "timer" file to define the schedule to run it on and finally "enable" the timer to activate it.

Answer 7

Create a cron job that runs env and redirects stdout to a file.
Use the file alongside "env -" to create the same environment as a cron job.

Answer 8

Don't forget that since cron's parent is init, it runs programs without a controlling terminal. You can simulate that with a tool like this:
http://libslack.org/daemon/

Answer 9

By default, cron executes its jobs using whatever your system's idea of sh is. This could be the actual Bourne shell or dash, ash, ksh or bash (or another one) symlinked to sh (and as a result running in POSIX mode).
The best thing to do is make sure your scripts have what they need and to assume nothing is provided for them. Therefore, you should use full directory specifications and set environment variables such as $PATH yourself.

Answer 10

The accepted answer does give a way to run a script with the environment cron would use. As others pointed out, this is not the only needed criteria for debugging cron jobs.
Indeed, cron also uses a non-interactive terminal, without an attached input, etc.
If that helps, I have written a script that enables painlessly running a command/script as it would be run by cron. Invoke it with your command/script as first argument and you're good.
This script is also hosted (and possibly updated) on Github.
#!/bin/bash
# Run as if it was called from cron, that is to say:
# * with a modified environment
# * with a specific shell, which may or may not be bash
# * without an attached input terminal
# * in a non-interactive shell
function usage(){
echo "$0 - Run a script or a command as it would be in a cron job, then display its output"
echo "Usage:"
echo " $0 [command | script]"
}
if [ "$1" == "-h" -o "$1" == "--help" ]; then
usage
exit 0
fi
if [ $(whoami) != "root" ]; then
echo "Only root is supported at the moment"
exit 1
fi
# This file should contain the cron environment.
cron_env="/root/cron-env"
if [ ! -f "$cron_env" ]; then
echo "Unable to find $cron_env"
echo "To generate it, run \"/usr/bin/env > /root/cron-env\" as a cron job"
exit 0
fi
# It will be a nightmare to expand "$#" inside a shell -c argument.
# Let's rather generate a string where we manually expand-and-quote the arguments
env_string="/usr/bin/env -i "
for envi in $(cat "$cron_env"); do
env_string="${env_string} $envi "
done
cmd_string=""
for arg in "$#"; do
cmd_string="${cmd_string} \"${arg}\" "
done
# Which shell should we use?
the_shell=$(grep -E "^SHELL=" /root/cron-env | sed 's/SHELL=//')
echo "Running with $the_shell the following command: $cmd_string"
# Let's route the output in a file
# and do not provide any input (so that the command is executed without an attached terminal)
so=$(mktemp "/tmp/fakecron.out.XXXX")
se=$(mktemp "/tmp/fakecron.err.XXXX")
"$the_shell" -c "$env_string $cmd_string" >"$so" 2>"$se" < /dev/null
echo -e "Done. Here is \033[1mstdout\033[0m:"
cat "$so"
echo -e "Done. Here is \033[1mstderr\033[0m:"
cat "$se"
rm "$so" "$se"

Answer 11

Another simple way I've found (but may be error prone, I'm still testing) is to source your user's profile files before your command.
Editing a /etc/cron.d/ script:
* * * * * user1 comand-that-needs-env-vars
Would turn into:
* * * * * user1 source ~/.bash_profile; source ~/.bashrc; comand-that-needs-env-vars
Dirty, but it got the job done for me. Is there a way to simulate a login? Just a command you could run? bash --login didn't work. It sounds like that would be the better way to go though.
EDIT: This seems to be a solid solution: http://www.epicserve.com/blog/2012/feb/7/my-notes-cron-directory-etccrond-ubuntu-1110/
* * * * * root su --session-command="comand-that-needs-env-vars" user1 -l

Answer 12

Answer https://stackoverflow.com/a/2546509/5593430 shows how to obtain the cron environment and use it for your script. But be aware that the environment can differ depending on the crontab file you use. I created three different cron entries to save the environment via env > log. These are the results on an Amazon Linux 4.4.35-33.55.amzn1.x86_64.
1. Global /etc/crontab with root user
MAILTO=root
SHELL=/bin/bash
USER=root
PATH=/sbin:/bin:/usr/sbin:/usr/bin
PWD=/
LANG=en_US.UTF-8
SHLVL=1
HOME=/
LOGNAME=root
_=/bin/env
2. User crontab of root (crontab -e)
SHELL=/bin/sh
USER=root
PATH=/usr/bin:/bin
PWD=/root
LANG=en_US.UTF-8
SHLVL=1
HOME=/root
LOGNAME=root
_=/usr/bin/env
3. Script in /etc/cron.hourly/
MAILTO=root
SHELL=/bin/bash
USER=root
PATH=/sbin:/bin:/usr/sbin:/usr/bin
_=/bin/env
PWD=/
LANG=en_US.UTF-8
SHLVL=3
HOME=/
LOGNAME=root
Most importantly PATH, PWD and HOME differ. Make sure to set these in your cron scripts to rely on a stable environment.

Answer 13

In my case, cron was executing my script using sh, which fail to execute some bash syntax.
In my script I added the env variable SHELL:
#!/bin/bash
SHELL=/bin/bash

Answer 14

I don't believe that there is; the only way I know to test a cron job is to set it up to run a minute or two in the future and then wait.