I started a new job a few weeks ago.
In my previous job, I was working with 2 screens. I know have 3 screens here (what an upgrade!)
I have always been bothered by a small bug, and since today I don't have a lot of code to do, I decided to finally try to solve this problem. The layout I want to achieve is pretty simple (see screenshots below): One file on the left screen, and another one on the right.
What happens is the following:
When I enter debug mode, the layout stays the same except one thing... the separation between two files (which is usually right between the two screens). Annoying for breakpoints and stuff, so I resize it, debug, and...
When I leave debug mode and go back to debug, the layout go back to what it was... except the separation which moved as well!
And last but not least, if I close Visual Studio and open it again, my two file views are now expanded on both screens, separated horizontally (<- this one is new, I had never seen that before).
Every time I go to debug mode, or go back to design, I would resize it to fit my two screens. And then it would shift again at the next debug. After some time it shifts with a smaller amount of pixels. Then, it just stops shifting, as if it learned that it shouldn't change. Until at some point, it goes back to normal and forces me to resize again.
I tried to use add-ons such as Perspectives or Layout O Rama , but they didn't keep any information about the two Code windows. No matter how I was saving them (let's say, one would be 20% of the left screen, and the other would expand on 2 screens), it would ANYWAY go back to the strange, shifted layout.
I also tried Visual Studio Productivity Power Tool and it's terrible. If I dock a code tab as a Window on my second screen, and dock for example the Find Results on it, it would be separated or reorganized every time I switch to Debug/Design
Has anyone experienced that yet? Am I the only one feeling that my Visual Studio is a pet who will learn how to do his own layout as time goes?
Thank you!
Also, as an image is always better than a description, here are a few screenshots:
Here, the normal, regular layout, with the red line being where my screens stop. Perfect, al dente layout allowing me to use the best of my two screens
Here, the one happening every time I go to debug. Notice how ONLY the code windows shifted (the bottom part with error list on the left and find results on the right didn't change at all )
And this is the one I get when I restart my IDE, forcing me to recreate my layout all the time
Thanks a lot!
VS2008 seems to have a new feature that allows one to split a website into the source code and design aspects on the same page. This feature seems great, however it defaults to having the design part on the bottom half of the screen and the code part on the top half.
Unfortunately, my brain doesn't work this way and it ends up being more of a hassle than to just continue switching back and forth when needed like I've done in the past.
Is there a way to swap them so that the design part is on the top and the code part on the bottom? Most other tools in VS are drag and droppable, so I can't see why not, but I'm not finding the setting anywhere. I did a quick google search and found a way to make the split vertical, but thats not what I'm looking for. I'm just looking for the same horizontal split with the design part on top.
Thanks
Here's an alternative approach that may help. If it's a traditional .aspx page (one that has a codebehind), you can open both documents simultaneously. Then right click one in the tab area at the top and select New Horizontal Tab Group. You can manipulate it so that the design window is on top of the code window.
I would be very surprised if this possible, since I have never seen a window configuration that changes the vertical alignment of the Objects and Events drop-down-lists.
I could be wrong, though.
It does seem rather strange - in the xaml designer you can split the screen whichever way you want as there is a button to switch the position of the panes. The options for the html designer only seem to allow a vertical or horizontal split though, there isn't anything in there specifying whether to have code or design at the top, it does seem a little backwards as I imagine most people find it more natural to have the visual designer at the top with the code below.
One of the window dialog of a software I'm working on looks a bit like this : (original screen-shot copied from this coding horror post, other examples available on this SO question)
The thing is that none of the options can be removed (those who can have already been), and that they must all be visible at a glance (i.e. no tabs allowed) Edit : I've added a comment explaining why tabs are not an option in my specific project.
I've tried to use colors, to add icons, but it just added to the overall feeling that someone had just dropped controls randomly using Visual Studio Form designer during a summer internship.
How can I make this dialog more user-friendly less horrifying without deleting features ?
Edit :
The GUI example I took has a lot of obvious design flaws (see those answers 1 2), but even after fixing those (which I've done on the software I'm working on), the dialog still looks pretty ugly.
Below is another example (credit). Controls are (almost) lined up correctly, appropriate controls are used, etc, but the overall result still looks terrible :
(source: judahhimango.com)
Given the constraints I think you won't have many options.
A good starting point would be to equal the alignments and control distances to increase overall symmetry with the ultimate goal to reduce visual clutter.
Examples:
The group boxes "Special" and "Running options" should have equal height.
The distances between the four buttons "Save settings" and "Exit" should be equal.
All buttons should have the same height, if possible avoid word wrapping.
Use the same height for all single-line edit boxes.
The quota label and its text field should be at the same baseline.
The distance between a group box caption and its first control should be equal (compare "Running options" to "Retrieval options")
Increase the distance between the controls in general, i.e. make the form look less dense.
Content fixes:
Use the same captions/names for the same things. For example, you use "Append to logfile" but "Overwrite Logfile
Use the same character case, sometimes it's "Only the first one", "Every Single Word" and sometimes "it is Camel-cased". Decide on one scheme and use it consequently (Sentence case and Title case are the most common)
Don't try to be cool, "Go 2 background" doesn't look very professional.
Avoid controls with unreadable shortcuts or no content at all. It doesn't help if the user has to stop on every control and think: "What does this thing do?"
Some more radical/controversal changes:
Try making the group boxes more symmetric, possibly be re-positioning them and use the same height. If necessary use two columns of checkboxes, that would still look better than uneven group boxes.
Unless it's absolutly necessary, remove the horizontal scroll bars from the two multiline edit boxes
Get rid of the "Clear" buttons. For the list box on the buttom left you have to provide some other way to delete items, perhaps make this into a multine text box, too.
Try replacing the checkbox collection with a checkable list box or a property grid.
A rule of thumb:
Imagine the lines of the bounding box of each control lengthed until it reaches the form boundary. The less different lines reach the boundary, the better. (Because correctly aligned controls produce more incident (-> less unique visible) lines)
On the use of colors and icons:
Simply adding icons and colors doesn't solve the fundamental problems such forms have. They all suffer from being overloaded with controls and adding even more only worsens the problem, because they just add more visual noise, but don't provide any more visual cues.
The problem with your examples, and the reason that they look cluttered is that there's not enough spacing between the elements. You think you're saving space by making things smaller, and putting them closer together, but it's a false economy because your eyes have to work harder to differentiate elements from eachother. Think about writing a computer vision program that had to OCR those interfaces, and the challenges you'd have just figuring out which element was which, let alone what the type says.
Regardless of what your programmer efficiency instincts might say.. it's okay to put space between your elements, and hell, it's okay to even have large amounts of completely "wasted" space too.
have a look at this
There's a clear boundary between the flower and its background. The shallow depth of field of the photography gives a clear contrast, and allows you to very rapidly construct a mental sillouette.
jungle http://www.statravelbuzz.co.uk/wp-content/jungle-taranaki-new-zealand.jpg
what's going on in this image? There's too much detail, and it's all over the place.
have a look here
http://www.papress.com/thinkingwithtype/text/line_spacing.htm
(source: papress.com)
think about what the line spacing is doing to your ability to distinguish words from eachother. What's it doing to the visual sense of clutteredness?
You can see from the type example that you don't have to give up much in terms of space efficiency to see massive gains in visual appearance.
grid systems
grid systems http://ecx.images-amazon.com/images/I/51kcWOOyUoL._BO2,204,203,200_PIsitb-sticker-arrow-click,TopRight,35,-76_AA240_SH20_OU01_.jpg
thinking with type
other reccomendations:
stop stealing sheep
elements of typographic style
the design of everyday things
the humane interface
If you've already dealt with alignment and organizational aspects as much as you can, then your problem probably is the graphic design of the controls. Heavy 3-D controls in large numbers are detrimental to the aesthetics and usability of a window. Consider editing their properties to flatten and lighten the controls’ appearance, using something I call “compact presentation.” In addition to removing the ugliness and distraction of heavy borders and backgrounds, this also allows controls to be placed closer together, freeing white space for grouping them without resorting cluttering lines and frames.
It looks something like this (after also fixing alignment and redundancy along with a little re-arrangement of groups):
(source: zuschlogin.com)
If you're on WinForms, One trick I've found useful is to pack multiple-instance data in a DataGridView, and single-instance data in a PropertyGrid. Both these controls help you pack lots of information in very small space, and still give you full control over their visualization (you can add descriptions, tooltips, etc.)
The thing is that none of the options
can be removed (those who can have
already been), and that they must all
be visible at a glance (i.e. no tabs
allowed)
Sigh. I would argue that, because everything is visible at a glance, they practically become invisible in a sea of controls.
That being said, the ff (yes another list) are my suggestions:
To reduce clutter, make the overall form bigger, and all controls more widely spaced apart in all directions
Standardize the height of the controls, e.g., textboxes must all have same height, buttons all have same height, etc
Align labels with text boxes more consistently
Make the layout flow down instead: 1 column, with each group having the same width as all other groups
Set all group box names in bold to make them stand out
Put all those "wGetStart.bat" commands in a group of its own
If you really want to learn more about making it "flow", with or without getting rid of all this "visible" information, you might wanna get a copy of Steve Krug's Don't Make Me Think:
Because tabs are not allowed, you can create a more grid like layout.
Adding detachable panes for related options and commands can help the user to organise them, at least. If they can be minimised/unpinned when not needed, then they can also free up valuable screen estate and unclutter the UI. See VisualStudio itself for a nice implementation.
Here's my random selection of suggestions:
make it bigger, this allows a more structured grouping by reducing the space constraint on each group
add some structure by grouping options that the user might want to combine at the same time
add meaningful headers (might require the previous item). "special", "running options", "retrieval options" don't really convey any useful information.
make sure that only options that can be combines randomly are checkboxes (for example are "no info", "all info", "some info" really completely independent options? Same for "append to logfile", "overwrite logfile").
use appropriate controls (spinner for number entry, file selection dialog for files, radio buttons for mutually exclusive items, ...)
deactivate controls that make no sense with current configuration (for example custom directory text field).
move all actions to a single place
hide the scrollbars unless they are actually needed (i.e. reduce visual clutter)
be more consistent (why is it "running options" and "retrieval options" but not "special options"?)
One thing that you may have, but is obvious for the WGET example is the use of a main menu, e.g. File, Edit, Tools, Help. And also a button bar too?
First, define a hierarchy of control blocks. Even if everything must be visible, I think that some functions are more important than others. Also, make a clear separation between functions that apply to the domain (e.g., Start wGetStart.bat) and functions that apply to the software (e.g., Save settings).
Second, organize the layout according to this hierarchy: most essential to the top and to the left.
Third, let your design breathe. Space is fundamental for defining content.
Since no one has said this yet, I will: your window isn't really all that bad. Yes, it's ugly, and yes, I would be personally embarrassed to admit that I designed an interface that looks like that.
However, this window only produces a negative reaction the first few times you look at it. Once a user has used this form a couple of times, they will stop seeing it as a random collection of controls and instead start perceiving it as an interface that lets them see every piece of information that they require at a glance and that lets them do everything they need to do with a few mouse clicks.
It's a dialog for setting a bunch of options, and it's probably perfectly functional and not a big deal at all for your users. You could put a lot of work into some weird, fancy-schmantsy replacement UI that might impress the StackOverflow code-noscenti, but we don't pay your salary.
Now, the second window - that's a piece of crap.
Without knowing both the content your application and what it currently looks like, I can only guess at the problems you are facing, but here goes.
You say that this is being used by traders. While I have never dealt with that segment of the market I have often dealt with executives who need very specific information to run their businesses and the first cut of the application almost always looked like what you have displayed.
The original solution back in the day was to build a very light custom interface for each user of the application focusing on only the information relevant to that person. More recently the move has been toward making the interface customizable by the end user.
Chances are that none of your users are using all of the information presented to them. Each of them is using only a small subset. But each user is using a different subset. Try building the software so that each user can display only the information that they will be basing their decisions on.
Aside from other much-needed changed, adding a banner (displaying the company logo or something like that) seems to improve the overall appearance of the dialog.
I know it's a pure waste of space but it seems to improve the global feeling about the window.
alt text http://img24.imageshack.us/img24/3423/wget.jpg
Duplication - they might all have to be available instantly, but they could be available elsewhere as well. So you can have a keyboard accelerator, menu option, detachable panel, tabbed area ...
So this existing form could be the main, default interface (albeit improved with some of the other good design tips in other answers), but why not create an "expert" panel which can be a lot neater and try to work your users on to that, and away from this old "do everything" blotter.
I would really consider evaluating the usability goals of your project. Figure out what users want to do most frequently and most consistently with your application and default to that.
You should consider a wizard for this UI. Guide the user through a set of screens for the first use. And move many of these features as configurable options preferences.
Usability is not merely aesthetics IMHO. It is about making clear what the app is intending to do. I would refactor this app to provide shortcuts to common options patterns. If 90% of the time I am going to use a specific configuration of options why do I need to see every feature enumerated in the UI 100% of the time? It is just unnecessary clutter. Sensible defaults powerful configuration that is the goal. You don't have to sacrifice features, in a sense not making me think is a feature, perhaps the most important feature.
With respect to your specific app I would rework it with two basic screens a clean default screen and an advanced screen. Add the ability to create shortcuts to common configuration sets on the default screen. A simple button that maps to a specific configuration set and asks me for a url. And if the user needs to tweak an option present them with the advanced screen but treat it as preference configuration screen that saves the preference out to a shortcut button. If I want to use the configuration more than once let me save it as a custom bookmark or option on the defaults screen.
This is one of the things OS X does really well. There is a lot of power and customizability in OS X, "hidden features" if you will. But the OS defaults to sensible and straight forward options. Provide tools to the power users but don't clutter the system for the first time or casual user. This is not sacrificing functionality, it is effectively organizing functionality.
That is my first suggestion. But if absolutely don't want to hide options, I would make this a long scrollable vertical list organized in clear steps with explanation for each step:
Step 1: Provide URL ______________
Step 2: Configure Hosts _____________
Step 3: Configure Retrieval Options:
() option
() option
() option
() option
And so on...
At each step provide some context to the meaning of the configuration options.
The advantage to this is that you can clean up the UI aesthetically and provide useful configuration hints. I don't know what "Empty wGetStart.bat" means. I presume this empties a batch file of some sort. Provide me an explanation so that I know whether I want to click that button or not. And then let me hide explanations under a collapsible menu if I use the interface regularly.
My two cents.
This may not be appropriate, but...
Hide all the options in a stylesheet, much the way that all the paragraph formatting options are hidden in a word processor. Most of the time, the user just picks a named style. When the scary stuff is necessary, a click of an 'Advanced' button can grow the form to show all the options at a glance, to allow a few to be overridden, or to allow new named styles to be defined.
Obviously, a major advantage is that if there are a few particular configurations that are regularly used, it's trivial to switch between them and there's very little risk of accidentally setting one of the options wrong.
Another option - don't have all your options on display, use tabs or a wizard or whatever. Instead, have a text list of all options currently set (or all options in non-default states or whatever) to get the at-a-glance visibility.
These could be combined, so that your summary display says something like "like <style name>, except for ...", based on the style that's least different to the current options.
In a comment you say that a user "HAS to have all information available at once". Does that mean they have to see all the checkboxes and frames and scrollbars at once, or just the information?
For example, instead of having a multitude of checkboxes for option 1, option 2, option 3, etc, in the main GUI, only show the selected options and give the user a way to open a configuration window when they need to change something.
Instead of this:
+- Feature Set X - +
| |
| [x] option 1 |
| [x] option 2 |
| [ ] option 3 |
| [x] option 4 |
| |
+------------------+
show this:
feature set x: option 1, option 2, option 4 [configure...]
This lets the users see all the selected options without having to take up valuable real estate for all of the widgets necessary to change the values.
(apologies if the ascii art doesn't appear right -- it looks right in a fixed font :-\ )
An interesting article on this topic:
Managing UI Complexity by Brandon Walkin.
In the second example I would remove most of the arrows from the right hand side box. I would add the ability to click and drag to change the number(if your users are used to that I know several 3d packages that do it so it wouldn't be uncommon in relation to the example). You can change check boxes to buttons with backgrounds that change color or stay depressed when clicked as another option to reduce visual clutter.
In the right hand side box there are two or three separate functions mixed together that very well could get their own tab. When you are working with an object's color and texture you aren't going to be changing its size and view aspect ratio so having them right there means they are in the way. At the very list they need to be rearranged to be in some sort of logical order right now they are all over the place. Texture and color(things that effect color) should be together. Position rotation and view(things that effect shape\size) should be together.
It has already been said, but without seeing your application we can't give you a concrete answer on how to make your dialog less horrifying. If you can't post screenshots, then the best advice I can give is to hire a designer to help you work on the graphical end of your application; otherwise all you will get are general guidelines here.
Some things that might have not been discussed:
Think about the users of your applications and the systems that they run. I believe that most stock traders will have large dual monitor setups, so you can probably make your dialog larger and add space between your controls to make it look less cluttered. You should research your audience and see what they use.
Are you using the best controls for the job? In the first screenshot you posted I noticed a few controls that could be changed:
a. Under "Running Options" I see three checkbox options called All Info, No Info, Some Info. If only one can be selected at a time then maybe they could be changed into a drop down selection menu. Also under the same "Running Options" there is Append Logfile, Overwrite Logfile, which again you can convert to a drop down menu since you can select only one.
b. The two text fields where you can put in hosts, can probably be combined into one gridview with three columns. The first column is the host, the second is a checkbox for Accept, and the third is a checkbox for Reject.
By simply using different controls, we can still see everything we need but have less controls on the application.
Again, like I said above, witout seeing YOUR applications I can't really give you any specific suggestions.
Hope this helps.
For reasons unknown, the VB6 compiler often likes to reorder the contents of .vbp files and the control descriptor block at the top of .frm files (The code that describes the properties of controls on the form. Code that you don't see in the IDE but you do see in a text editor and when doing diffs against the previous revision in version control.). This is monumentally annoying and very distracting when comparing revisions of a file.
Is there a way to prevent this?
I don't think there's much you can do about this. I've noticed the same problem: the IDE likes to rearrange things for seemingly no apparent reason. Some things I've noticed:
When you use the SSTab control, VB
likes to rearrange properties for
tabs, especially the TabEnabled
property.
For project files, it randomly
rearranges the order in which files
appear and I think I remember seeing
cases where similar file types are
not always grouped together and end
up mixed in with the project
properties. You don't have
much control over this, unless you run all your VBP's through some type of sanitizer that groups like files together (forms in one group, modules in another group, etc.) and sorts them alphabetically or something, so that they remain consistent. One possible way to handle this could be to write an IDE add-on that automatically does this everytime you save changes to a project file, or come up with some batch process that will just recurse over your source directories and clean up all the VBP's in one go.
The IDE seems to randomly change the
case of things; this seems to happen
frequently to project references.
Sometimes they are output in lower
case, and other times they are
output in upper case. You can get
around this by choosing "Ignore
Case" when you diff files in
SourceSafe.
Control coordinates, such
Top, Left, Height, and Width, can differ between
two revisions of the same form. This is due
to different developers using
different screen resolutions and/or
different screen DPI settings while working on the same form.
If you aren't doing this already, I
highly recommend that you get
everyone to develop using the same
resolution and same DPI setting.
The differing values are caused by rounding errors that
occur when logical screen
coordinates at different resolutions/DPI settings
are converted to twips, the default
coordinate space that VB uses for
laying out forms. Additionally, while I'm on the topic, make
sure everyone has their display set to 96dpi,
because if you develop VB forms at
120dpi, there is a really really good
chance they won't display correctly
on a display set to 96dpi.
There are probably other things I
can't remember right now...
As for the order of controls being changed in form files, this is normal, and you usually don't want to try rearrange the order of controls by hand if it happens to change from one revision of the form to the next. The order that the controls appear in a form file determines their Z-order on the form. If the order of the controls changes in the .frm file, this will change their relative Z-order on the form, which could lead to unintended results in how your forms are displayed.
Can you make the .vbp file read-only when you aren't editing it (ie, adding modules, etc)?
As far as form files...I can't think of any good way at all to make VB not reorder them. But I have to say that I've never encountered this before. Are you sure that something else isn't going on?
It's entirely possible that I just never paid any attention to this in the past, so I'm not saying you are mistaken, just offering my own observations.
I have noticed that re-opening the form and saving again often restores a consistent order.