I'm using Visual C# 2010 Express RTM with Windows Phone Developer Tools April CTP Refresh and when I run any Build option, nothing happens. I've deleted the contents of the build output folders and that doesn't do anything. I can't even run the project, because it complains the executable is missing (XNA Game for Windows project). I've tried the project on another computer and it builds just fine. Any ideas?
I'm not sure how this happens, but here's how I fixed it:
Open Build -> Configuration Manager
In the "Platform" column, choose x86 instead of Any CPU
Click close
These exact steps may not work for you, but I've found that if you play around in the Configuration Manager window it will usually resolve this problem.
try a reinstall?
Visual Studio 2010 doesn't work with current versions of XNA Studio. You'll could wait until XNA Studio 4 comes out (apparently due this month).
To solve your issue, use Visual Studio 2008 or use the workaround at this link to continue using VS2010 and XNA.
Related
Problem picture
Environment:
Windows10 Professional Visual Studio 2017 Unity 2017.4.12f1
I changed the default installation path of Visual Studio 2017 and installed it successfully.
The install path as follows:
D:\win10\Program\visual_studio\2017
However, in the Build setting of Unity, it still can't find my Visual Studio 2017.
How can I solve the problem? Thanks~
Go to Edit > Preferences, and select your Visual Studio to be the preferred external editor. Use Browse if Visual Studio is not listed. More info here.
You need to install windows 10 SDK
https://developer.microsoft.com/en-us/windows/downloads/windows-10-sdk/
Here's a third answer. I just bumped in to this, and checked that yes VS was the preferred editor, so I went to open up VS to try uninstalling and reinstalling the GameDevWithUnity workflow, but VS popped up a dialog saying I needed to reboot my computer before installation could complete. So it seems like VS was stuck in the middle of an upgrade, which makes it reasonable that Unity couldn't find an appropriate version. I rebooted and everyone is happy.
I have the problem that Visual Studio 2013 crashes when I lock the computer or start another instance of Visual Studio.
I use Visual Studio 2013 with latest patches applied. I always start Visual Studio as Admin.
This seems to only happen with a certain big solution. This problem did not occur to me with other solutions.
I tried to delete the solution and make a clean checkout from TFS, but Visual Studio still crashes.
I know this is not much information, but do you have any idea how to fix this or how to what else I could check?
Additional Information: This still happens even with Visual Studio 2015 on a fresh Windows 8.1 installation...
Here's the error:
Use the following steps to solve the issue:
Source: http://resharper-support.jetbrains.com/entries/24765142-Visual-Studio-with-ReSharper-is-freezing-and-or-crashing
I would copy the solution with quotation but as you can see, there is a lot of text to edit.
Start Visual Studio using the /log switch. Then check the created log file for warnings and errors:
%APPDATA%\Microsoft\VisualStudio\11.0\ActivityLog.xml
If you use a Web Browser to view the file, it will be nicely formatted, due to the accompanying xsl-sheet.
OK, can't find a solution to this.
A client sent me his Microsoft Visual Studio Express 2012 for Web project. I have Microsoft Visual Studio Ultimate 2010 installed.
I get an error when I try to open his project saying "this project is not compatible with the current version of visual studio".
We'll be passing the project back & forth quite a bit, so I need a solution that meets that need please.
So, I figure I may be able to modify the project with a text editor to let me open it. If so, do I have to re-edit it back when I send it back to him?
Can I install VS Express 2012 for Web on a machine that already has VS Ultimate 2010 on it without any conflicts? Can I open it if I install VS 2012 Ultimate (keeping 2010 as well)?
I have another client that uses 2010, so whatever I do, I need to be able to still support him.
If I can't have 2 versions installed at the same time, and can't easily edit a file to make it compatible, then I guess my last option is a virtual machine.
Thanks in advance for any advice.
Microsoft Visual Studio has backwards compatibility since the version 2010 SP1.
So in this case you just need update your Visual Studio 2010 to SP1 and it will understand the new way files are versioned.
Based on my experience:
You do can edit it with a text file and send it back, but it's not compiled yet so it's your partners job.
Maybe, just maybe, you can edit the .sln and .(whatever the project file extension is) file to meet your VS10 env (I think it's going to be a bumpy road though)
Yes, I'm pretty sure you can have VS 10 and VS 12 installed on same machine, note that you have to have .Net 4.0 and .Net 4.5
I installed Vs 2010 Express in my PC, and created a poject named myproject with .net 4.0, it works well in Vs 2010 Express.
Now I installed Vs 2012 Express in my PC, and open the project myproject and upgrade it to .net 4.5, it wells well in Vs 2012 Express too.
I delete the project myproject all files, then restore it from my old backup file, when I try to open the project from Vs 2010 Express, I get the following information.
"This project is incompatible with the current version of visual studio", why?
How can I open the project in Vs 2010 Express? I guess the Vs 2012 Express maybe mark the project as .net 4.5 and stored the information in the somewhere of hard drive. Although I restore the project myproject from old backup file, Vs 2010 Express still think it is a project of .net 4.5.
Thanks!
If the message "This project is incompatible with the current version of Visual Studio" is due to an attempt to open a project targeting .Net 4.5 with Visual Studio 2010, then the "solution" or workaround is to edit the .csproj file and change the TargetFrameworkVersion from "v4.5" to "v4.0". That at least allows the project to be loaded, although it may result in compiler errors if the program is dependent on 4.5 features.
I know this is a little old, but just in case the above solutions don't work: don't be an idiot like me and try to open an MVC project using "VS for Desktop" instead of "VS for Web" (or vice-versa), since it will give you the incompatible message.
I use TFS at my job and I tried to open a MVC project via the TFS Solution Explorer. I wasn't paying attention to which Visual Studio version I had open and since both IDE's look alike, I was confused at what was going on - a common mistake, I'm sure =P
If you are getting the same error for a project which is actually an extension (.vsix), please install Microsoft Visual Studio 2012 SDK
Installing KB2781514 - Update for Microsoft Visual Studio 2012 solved the problem for me.
Check the directory that contains the solution file for an UpgradeLog.htm file. It will probably show what's wrong. In my case I tried to open an ASP.NET project, but the Web Developer Tools were not installed.
The Web Developer Tools can be installed afterwards by going to the Control Panel and to modify your existing Visual Studio installation. After adding Web Developer Tools the project opened without issues.
In my case the problem was the Component Model Cache (Visual Studio for C++).
in VS2013 it is located in
%localappdata%\Microsoft\VisualStudio\12.0\ComponentModelCache
in VS2015 in
%localappdata%\Microsoft\VisualStudio\14.0\ComponentModelCache
Rename this folder and restart visual studio.
I received this error because during the BizTalk install I did not check the Developer Tools and SDK checkbox. I went back and modified my installation and that error went away for me now.
Trying to load a BizTalk Project in VS2012 without BizTalk installed on your developer machine, will result in this error and the projects will load. This should be the first thing you check.
Make sure that all your extensions are same as in previous version. For me, when I upgraded from old PC to New PC, I didn't downloaded correct extensions hence resulting in above issue.
I faced out with this problem, the solution was:
Open VS2017
Go to Tools
Go to Extensions and updates
Search for Reporting Services Project and then "Enable"; close your VS.
Open again your project/solution.
--
MT
I have around 50 projects in Visual Studio 2005 that I am building a new development machine for and I'd like to slowly move those projects to VS 2008 but also have 2010 available for select new projects.
Can this work? Are there any gotchas for this sort of setup? Any general advice for running multiple versions of Visual Studio on the same system would be greatly appreciated. Specifically related to managing a controlled migration of projects to new versions but being able to selectively keep some on old versions.
I've got 7.1, 8, and 9 installed at the same time (well, and VB part of 6 as well) and I've not really had a problem opening projects file in the wrong version. The Visual Studio Solution files is "associated" with a particular version even if they all have the same extension of .sln, as you can see from its little icon. Microsoft Visual Studio Version Selector seems to handle individual project files (.vcproj) fine as well.
The only thing I've had is the individual source code files not opening up in the latest version like I want, but that's easily fixed with the click of a little button in VS Opions.
Microsoft have this to say:
Visual Studio supports the installation of Visual Studio .NET 2002, 2003, ... on the same computer.
In general, you should install the earliest release of Visual Studio first, and then install subsequent versions of Visual Studio in the order in which they were released.
Make sure when you open up the 2005 files you're doing it in 2005. To open them in another would require a conversion which would render them incompatible with the older compiler set-up. To aid this, structure whatever workspace you're using into 2005, 2008, and 2010 so as to minimize accidental chance of this.
Second, when you double click to open the projects, it will invariably attempt to open them with 2010. You'll have to start with VS#### instead of the solution/project unless you're in the 2010 workspace.
I have VC6, VB6, VS 2008, and VS2010 RC installed on Windows Vista. I cannot double click on the VC6 dsp files without VS2010 opening and asking to perform the conversion. The 2008 C# projects open in 2008 as long as I use the solution file. The 2008 project file opens in 2010 instead of 2008 even though the version selector is the default program. Most of the time I try to remember to open the desired version of Visual Studio and then open the project.
You can mitigate some of these issues by changing the default program associations in the control panel or the registry.
Update: This setup works on Windows 7 x64, with the addition of VS2013.
Yes it can work. I'm not sure if you have to install them in a particular order... but install them in order of the versions... 2005, 2008, 2010. Should be good to go.
I can't speak for 2010, but I have run 2005 and 2008 at the same time on my system without any fuss.
And I made the double-click mistake that wheaties warns about more than once :(
I have VS2005 & VS2008 running without any issues. I have had problems when working with betas, express editions & am assuming you don't have them.
I would say refrain from making too many changes to the setup of these editions, it should be fine.
I also had the same doubt. I work at my company which is still on VS 2008 and I want to personally use the VS 2010 and not risk the 2008. I installed the 2010 and it worked fine with the 2008. Just make sure you note the projects that are in 2005 and open them with the same accordingly.
The reason why it works is simple: if you open your solution file in Notepad, you'll see which version of VS is related to your project.