How do I make an application that I can make the ESC key close a window? Or really any key (I can change if I want to).
Please help. Thanks
Here is what I have and I can't get it to work.
-- close window with "ESC"
tell application "System Events"
tell application "Finder" to activate
key code 53
end tell
beep 3
Thanks! B-
There's a system wide shortcut (Command + W) that will close the currently activated window
tell application "System Events"
tell application "Finder" to activate
keystroke "w" using command down
end tell
However, I'm not sure that this answers your question. Its impossible to use plain AppleScript to listen to system wide keyboard events. Take a look at the answer to this question.
PCWiz's link should show you the way - have a look at the second answer (by ghoppe - setting keyboard shortcut to application in preferences). Just remember to save the script as application, otherwise it'll not be eligible.
Related
I am trying to make an AppleScript that toggles automatic rearranging of spaces. I am able to get the AppleScript to open system preferences and go into mission control settings, however i am not sure how to check the box which i want to change.
tell application "System Preferences"
activate
end tell
tell application "System Events"
tell process "System Preferences"
click menu item "Mission Control" of menu "View" of menu bar 1
delay 2
tell window "Mission Control"
//additional code goes here
end tell
end tell
end tell
Is there a way to see what the components of the window are so i know if i need to go into a table, or something else, before i am able to access the check boxes that toggle the settings
This is an alternative method using a shell command via AppleScript, which has the benefit of not requiring System Preferences to be open/running/visible. It's also much faster.
If you do happen to have it open in order to monitor whether the script below works, bear in mind that the GUI (what you see) is not updated until you close System Preferences, and open it up again.
To set Automatically rearrange Spaces based on most recent use to true (i.e. so the checkbox is ticked):
do shell script "defaults write com.apple.dock 'mru-spaces' -bool true; killall Dock"
To set it to false, i.e. untick the checkbox, change true to false in the line of code above.
To toggle the setting, this short script will achieve that:
set currentSetting to ¬
(do shell script ¬
"defaults read com.apple.dock 'mru-spaces'") ¬
as integer as boolean
do shell script ¬
"defaults write com.apple.dock 'mru-spaces' -bool " & ¬
(not currentSetting) & ¬
"; killall Dock"
Note: Tested with MacOS High Sierra, but should work (I believe) in OS X Mavericks and later.
Other Settings
When switching to an application, switch to a Space with open windows for the application
do shell script "defaults write -g AppleSpacesSwitchOnActivate -bool true"
(or false if you want the option off.)
Group windows by application
do shell script "defaults write com.apple.dock 'expose-group-apps' -bool true; killall Dock"
(or false if you want the option off.)
Let me start by saying while both of the other answers prior to this one do work, nonetheless I wouldn't use either one of them for the following reasons.
The answer presented by shadowsheep works however it needlessly exposes the System Preferences GUI and I believe unless your system is really slow the value of the delay command is excessive by 50% and only one should be necessary in this use case.
The answer presented by CJK works however it uses killall Dock which is visually distracting and causes all minimized windows on all Desktops to be unminimized leading to further visual distractions, and clutters the Desktop(s), which can then require the User to cleanup the mess. Even without other windows open it's still more so a visual distraction then what I'll present.
Now every User has different work habits so maybe none of the reasons mentioned are of any consequence to you. Personally, I work between four virtual Desktops and can have dozens of windows opened in numerous apps across the Desktops with many, if not most minimized at times. Using killall Dock for me is the last thing I want to do most of the time.
With that said, here's an alternative to both of the existing answers prior to this one.
It's probably safe to say that most Users don't open and leave open System Preferences however the following example AppleScript code checks to see if it's running and if so closes it. This is so it can be opened without showing the GUI, so as not to have to see the the visual distraction of have the GUI change as the script progresses.
This example AppleScript code simply toggles the state of the target checkbox:
if running of application "System Preferences" then
quit application "System Preferences"
delay 1
end if
tell application "System Preferences"
reveal pane id "com.apple.preference.expose"
delay 1
tell application "System Events"
tell group 2 of window 1 of application process "System Preferences"
click checkbox "Automatically rearrange Spaces based on most recent use"
end tell
end tell
quit
end tell
This example AppleScript code conditionally clicks the target checkbox using 0 or 1 in if value is equal to 0 then click it. Use 0 to only click it if it's not checked and 1 to only click it if it's checked.
if running of application "System Preferences" then
quit application "System Preferences"
delay 1
end if
tell application "System Preferences"
reveal pane id "com.apple.preference.expose"
delay 1
tell application "System Events"
tell group 2 of window 1 of application process "System Preferences"
tell checkbox "Automatically rearrange Spaces based on most recent use"
if value is equal to 0 then click it
end tell
end tell
end tell
quit
end tell
Both example AppleScript code blocks shown work fast and without seeing the System Preferences GUI and the only visual effect is the Dock Tile for System Preferences does a single bounce and may not even be noticeable, especially when compared to the visual distraction of killall Dock.
Note that the value of the delay commands may need to be adjusted for your system, and or additional delay commands may or may not be needed. Adjust values of and or add/remove the delay commands as appropriate.
Note: The example AppleScript code is just that and does not employ any other error handling then what's shown and is meant only to show one of many ways accomplish a task. The onus is always upon the User to add/use appropriate error handling as needed/wanted.
This should to what you want.
In this example Automatically rearrange Spaces based on most recent use is the checkbox you want to check.
tell application "System Preferences"
activate
delay 2
set the current pane to pane id "com.apple.preference.expose"
delay 2
tell application "System Events"
click checkbox "Automatically rearrange Spaces based on most recent use" of group 2 of window "Mission Control" of application process "System Preferences"
end tell
quit
end tell
And this if you wanna check it only if it's not checked:
tell application "System Preferences"
activate
delay 2
set the current pane to pane id "com.apple.preference.expose"
delay 2
tell application "System Events"
tell checkbox "Automatically rearrange Spaces based on most recent use" of group 2 of window "Mission Control" of application process "System Preferences"
if (get its value) = 0 then click it
end tell
end tell
quit
end tell
And if you wanna list all the UIElements in the window:
set myArray to {}
tell application "System Preferences"
activate
delay 2
set the current pane to pane id "com.apple.preference.expose"
delay 2
tell application "System Events"
tell window "Mission Control" of application process "System Preferences"
repeat with uiElem in entire contents as list
set myArray to myArray & ((class of uiElem as string) & " : " & name of uiElem as string)
end repeat
end tell
end tell
end tell
I'm trying to program Alfred to open my Terminal, Sublime Text, and Chrome with a workflow.
I would like for my terminal to open normally as a window, but I've been trying to get Chrome and Sublime to open full screen.
I was able to get Chrome to open up in full screen mode with:
on alfred_script(q)
tell application "Google Chrome"
tell window 1 to enter presentation mode
end tell
end alfred_script
However, this did not translate to work with my Sublime Text.
What am I missing here?
Another way to do this assuming you have not changed the default keyboard shortcut for "Enter Full Screen" is simply to have System Events invoke that shortcut (⌃⌘F). As with the other approach I've seen to doing this (changing the value of AXFullScreen—see mklement0's answer here for a thorough discussion of this method), this requires making the relevant window active.
For instance, to toggle the full-screen state of the frontmost window in Safari, run:
tell application "Safari" to activate
tell application "System Events"
keystroke "f" using {command down, control down}
end tell
As found here (i need an applescript to open safari in full screen an to hide the toolbar on mavericks). The make new document line prevents the can't get window 1 error by opening a new tab if one has not previously been opened.
tell application "Safari"
make new document
activate
delay 3
tell application "System Events" to tell process "Safari"
set value of attribute "AXFullScreen" of window 1 to true
end tell
end tell
I am pretty new to programming, especially with AppleScript. I wrote a simple script for Valentine's Day to play a song from iTunes and then open a flash animation file in Safari. When I run the script in ScriptEditor, everything works as desired, but when I export as a standalone application, it fails at the command to enable full-screen mode. I am assuming it is an issue with System Events. To be clear, the application functions to the end, but at the keystroke command I hear an alert sound and the window remains as-is.
I am running Yosemite, and am fully updated.
Ideally, I would like to open the file in Google Chrome to utilize Presentation Mode, but I can't even get Chrome to open the file.
Thanks for any advice! Here is the code:
tell application "Finder"
set visible of every process whose visible is true and name is not "Finder" to false
close every window
end tell
set volume output volume 75
tell application "iTunes"
set currentVolume to sound volume
if player state is playing then
stop
back track
end if
play track "The Promise"
set player position to 6
end tell
delay 4
tell application "Safari"
activate
if (count of windows) is 0 then -- Remove "if" statement if you don't want to make a new window if there is none
make new window at front
end if
open (POSIX path of (path to home folder)) & "/Desktop/beMine/beMine.swf"
tell application "System Events"
tell process "Safari" to keystroke "f" using {command down, control down}
end tell
end tell
I agree with Jerry Stratton's comment that it could be an accessibility issue. However it also could be that you are issuing the keystroke command before Safari is ready to accept it. If it's opening a file then it could be busy and miss the keystroke command.
Also, I would move the system events code outside the Safari code and also just tell system events, rather than the Safari process, to perform the keystroke command. Try this as the Safari and System Events parts.
NOTE: I can't get Chrome to open a file either.
tell application "Safari"
activate
if (count of windows) is 0 then -- Remove "if" statement if you don't want to make a new window if there is none
make new window at front
end if
open (POSIX path of (path to home folder)) & "/Desktop/beMine/beMine.swf"
end tell
tell application "Safari" to activate
delay 1
tell application "System Events"
keystroke "f" using {command down, control down}
end tell
Most likely you’ll need to allow your standalone application to use System Events. At some point you needed to do that for Script Editor; you’ll need to do the same for your standalone app.
You’ll find the option in System Preferences under Security & Privacy, then Privacy, and then Accessibility. There’ll be a list of apps, and your app is probably listed there without a check for “Allow the apps below to control your computer.”
You may need to use the “+” button to add your app to the list.
I have verified that I can use this simple script to make Safari full-screen; it will work if the app is given permission under Accessibility, and it will silently fail if not.
tell application "Safari"
activate
end tell
tell application "System Events"
tell process "Safari" to keystroke "f" using {command down, control down}
end tell
This is Yosemite, Mac OS X 10.10; it may be different in other versions of Mac OS X.
alright I'm currently having a lot of issues with my applescript editor. currently when ever i do a Key up key down sequence it will always key the letter A. for example.
tell application "System Events"
key down "u"
key up "u"
delay 1
end tell
this will keystroke A and i don't know why.
^ thats only a minor issue though my big problem is that i want to swap between three different video game applications. They are all a duplicate of the same game. Heres how my basic script goes.
tell application "Video Game" to activate
tell application "System Events"
keystroke a bunch of stuff
end tell
tell application "Video Game copy" to activate
tell application "System Events"
keystroke a bunch of stuff
end tell
tell application "Video Game copy 2" to activate
tell application "System Events"
keystroke a bunch of stuff
end tell
The problem is when i try to compile the script the application name always corrects to "Video Game".
Any ideas on how to keep it from compiling in correctly?
I have tried putting in a bogus name then when applescript asks me to find the app i click the correct one under the browse search box. and it will still compile incorrectly.
thanks a bunch :)
what you describe seems a bug in applescript. Here is a little workaround for that. I wrote it for jxa (javascript for ui automation), so you have to port it to applescript i think:
ObjC.import("Cocoa");
function key(aiKeyCode, aiDelay)
{
var source = $.CGEventSourceCreate($.kCGEventSourceStateCombinedSessionState),
keyDown = $.CGEventCreateKeyboardEvent(source, aiKeyCode, true),
keyUp = $.CGEventCreateKeyboardEvent(source, aiKeyCode, false);
$.CGEventPost($.kCGAnnotatedSessionEventTap, keyDown);
delay(aiDelay);
$.CGEventPost($.kCGAnnotatedSessionEventTap, keyUp);
}
keystroke will get the key to be pressed once. It helps to tell the process App you are telling System Events to do something, i.e.
tell application "System Events" to tell process "App Name" to keystroke "u"
If you want to do it with command, option, shift, etc. use this:
tell application "System Events" to tell process "App Name" to keystroke "u" using {command down, shift down, option down}
What AppleScript Editor is doing is not “autocorrect” — it’s “compiling.” It’s not doing it incorrectly. You can change the name of an app on the Mac and it doesn’t break the app. AppleScript Editor is still able to find the app “Video Game” even if you change its name to “Video Game copy 1.” This is a feature, not a bug.
I'm trying to tell applescript to open the app, Application Loader, and choose from the drop down list that's in the window. The item that should be chosen will always be the very first item. How do i do this?
Thanks in advance.
Wow I finally got it working! I pretty much got mad at my script so I just put a random ASCII number and it magically worked. I got pretty happy aha :)
activate application "Application Loader"
tell application "System Events"
tell process "Application Loader"
tell the first combo box of window 1
delay 3
keystroke (ASCII character 30)
keystroke (ASCII character 12)
keystroke return
end tell
end tell
end tell