Is there a way to take complete control of the motherboard speaker in Windows? So, instead of calling a function like this:
beep(durationMs, frequency);
I can use:
beepContinuous(frequency);
So all I have to specify is a frequency and it will output the correct voltage to play that frequency.
There's a good discussion of a bunch of audio API choices on this SO question. The most basic technique is to use the waveOut calls in the Waveform Audio API set.
Related
Simply put, I need to take results from a DAQ and display them visually in a UI (no interaction needed) that gets information updated in real time. The DAQ I am using has an "utility" to plug into Labview, so it seems that the easiest way is to grab this data from Labview and then transmit that data to some UI using one of these methods.
I am using Windows 10 (although I could boot to Ubuntu), just not sure what UI application would be best / easiest to use.
You can use this National Instrument's tool for DAQ UI visualization. As it is native it should be quite straightforward to use.
You may want to use the DAQExpress VI in LabVIEW as #MateoRandwolf suggested. The neat thing about it is that it almost creates your first programm automatically -- besides the configuration of your NI modules.
There are just two things missing:
a waveform chart, and
a write to a TDMS file
Here is a snippit of a simple program doing this (the stop button is important to actually close the TMDS file before aborting the program)
If you really want to stream the data to a different device, you I suggest to use TCP/IP. There exist good examples in the documentation from which you can start (Help > Find Examples... > Search-tab). If you cannot accept the roughly 40ms buffer that TCP/IP has (because of shake-hands etc.), have a look on UDP.
You can use Dewesoft's DAQ systems which use dual mode capability. They use dual data buses (EtherCAT and USB). USB for high-speed buffered data storage to the PC's SSD hard drive and the EtherCAT bus for low latency real-time stream to any 3rd party EtherCAT master.
The DAQ systems are also capable of visualising data in real-time on the display using various pre-build visual displays like recorders, XY graphs, 3D graphs, osciloscopes, FFTs, GPS, video, and numerous other...
OK, the first issue. I am trying to write a virtual soundboard that will output to multiple devices at once. I would prefer OpenAL for this, but if I have to switch over to MS libs (I'm writing this initially on Windows 7) I will.
Anyway, the idea is that you have a bunch of sound files loaded up and ready to play. You're on Skype, and someone fails in a major way, so you hit the play button on the Price is Right fail ditty. Both you and your friends hear this sound at the same time, and have a good laugh about it.
I've gotten OAL to the point where I can play on the default device, and selecting a device at this point seems rather trivial. However, from what I understand, each OAL device needs its context to be current in order for the buffer to populate/propagate properly. Which means, in a standard program, the sound would play on one device, and then the device would be switched and the sound buffered then played on the second device.
Is this possible at all, with any audio library? Would threads be involved, and would those be safe?
Then, the next problem is, in order for it to integrate seamlessly with end-user setups, it would need to be able to either output to the default recording device, or intercept the recording device, mix it with the sound, and output it as another playback device. Is either of these possible, and if both are, which is more feasible? I think it would be preferable to be able to output to the recording device itself, as then the program wouldn't have to be running in order to have the microphone still work for calls.
If I understood well there are two questions here, mainly.
Is it possible to play a sound on two or more audio output devices simultaneously, and how to achieve this?
Is it possible to loop back data through a audio input (recording) device so that is is played on the respective monitor i.e for example sent through the audio stream of Skype to your partner, in your respective case.
Answer to 1: This is absolutely feasable, all independent audio outputs of your system can play sounds simultaneously. For example some professional audio interfaces (for music production) have 8, 16, 64 independent outputs of which all can be played sound simultaneously. That means that each output device maintains its own buffer that it consumes independently (apart from concurrency on eventual shared memory to feed the buffer).
How?
Most audio frameworks / systems provide functions to get a "device handle" which will need you to pass a callback for feeding the buffer with samples (so does Open AL for example). This will be called independently and asynchroneously by the framework / system (ultimately the audio device driver(s)).
Since this all works asynchroneously you dont necessarily need multi-threading here. All you need to do in principle is maintaining two (or more) audio output device handles, each with a seperate buffer consuming callback, to feed the two (or more) seperate devices.
Note You can also play several sounds on one single device. Most devices / systems allow this kind of "resources sharing". Actually, that is one purpose for which sound cards are actually made for. To mix together all the sounds produced by the various programs (and hence take off that heavy burden from the CPU). When you use one (physical) device to play several sounds, the concept is the same as with multiple device. For each sound you get a logical device handle. Only that those handle refers to several "channels" of one physical device.
What should you use?
Open AL seems a little like using heavy artillery for this simple task I would say (since you dont want that much portability, and probably dont plan to implement your own codec and effects ;) )
I would recommend you to use Qt here. It is highly portable (Win/Mac/Linux) and it has a very handy class that will do the job for you: http://qt-project.org/doc/qt-5.0/qtmultimedia/qaudiooutput.html
Check the example in the documentation to see how to play a WAV file, with a couple of lines of code. To play several WAV files simultaneously you simply have to open several QAudioOutput (basically put the code from the example in a function and call it as often as you want). Note that you have to close / stop the QAudioOutput in order for the sound to stop playing.
Answer to 2: What you want to do is called a loopback. Only a very limited number of sound cards i.e audio devices provide a so called loopback input device, which would permit for recording what is currently output by the main output mix of the soundcard for example. However, even this kind of device provided, it will not permit you to loop back anything into the microphone input device. The microphone input device only takes data from the microphone D/A converter. This is deep in the H/W, you can not mix in anything on your level there.
This said, it will be very very hard (IMHO practicably impossible) to have Skype send your sound with a standard setup to your conversation partner. Only thing I can think of would be having an audio device with loopback capabilities (or simply have a physical cable connection a possible monitor line out to any recording line in), and have then Skype set up to use this looped back device as an input. However, Skype will not pick up from your microphone anymore, hence, you wont have a conversation ;)
Note: When saying "simultaneous" playback here, we are talking about synchronizing the playback of two sounds as concerned by real-time perception (in the range of 10-20ms). We are not looking at actual synchronization on a sample level, and the related clock jitter and phase shifting issues that come into play when sending sound onto two physical devices with two independent (free running) clocks. Thus, when the application demands in phase signal generation on independent devices, clock recovery mechanisms are necessary, which may be provided by the drivers or OS.
Note: Virtual audio device software such as Virtual Audio Cable will provide virtual devices to achieve loopback functionnality in Windows. Frameworks such as Jack Audio may achieve the same in UX environment.
There is a very easy way to output audio on two devices at the same time:
For Realtek devices you can use the Audio-mixer "trick" (but this will give you a delay / echo);
For everything else (and without echo) you can use Voicemeeter (which is totaly free).
I have explained BOTH solutions in this video: https://youtu.be/lpvae_2WOSQ
Best Regards
What's the lowest level Windows function(s) to play sound? (The function(s) that are called by any other functions that play sound).
For example, fopen() calls CreateFileA(), and CreateFileA() calls CreateFileW(), and CreateFileW() calls NtCreateFile(), etc. I want to know what's the lowest-level one for sound (without comunicating with the sound driver directly).
PlaySound would be as low as i would go.
http://msdn.microsoft.com/en-us/library/aa909766.aspx
But check out all the winapi sound functions on MSDN
http://msdn.microsoft.com/en-us/library/aa909811.aspx
On Vista and Win7, you can use WASAPI. If that's too low level (as much of it is geared for pro-audio tools), you can look at the Wave and DirectSound APIs to stream buffers of audio out to the speakers. There's also the XACT/XNA stuff for games. All of these APIs ultimately sit on top of WASAPI, but are likely easier to use.
If you just want to Play a WAV file from time to time without any notification or mixing support, its hard to beat PlaySound.
Is there an API that is suitable for doing this? A possible application of this is for writing a visualiser, and to play with real time signal processing.
EDIT: The operating system in question is Windows. On Linux, a roundabout way to accomplish this is with Jack, but I'm hoping for a way to read the data in the audio buffer without having to couple apps to Jack.
EDIT: A good answer is found here.
If sound board used for playback has recording device/line like "Stereo Mix", "What U Hear", etc., then it is enought to write simple recording application, that is capable to record from a specified recording device/line and record from the "Stereo Mix",...
General case (for "all sound boards") will require to write special driver. Examples of applications with such spesial drivers: Virtual Audio Cable (http://software.muzychenko.net/eng/vac.html); Total Recorder (http://www.totalrecorder/com).
Is it possible to use the NSSpeechRecognizer with an pre-recorded audio file instead of direct microphone input?
Or is there any other speech-to-text framework for Objective-C/Cocoa available?
Added:
Rather than using voice at the machine that is running the application external devices (e.g. iPhone) could be used for sending just an recorded audio stream to that desktop application. The desktop Cocoa app then would process and do whatever it's supposed to do using the assigned commands.
Thanks.
I don't see any obvious way to switch the input programmatically, though the "Speech" companion guide's first paragraph in the "Recognizing Speech" section seems to imply other inputs can be used. I think this is meant to be set via System Preferences, though. I'm guessing it uses the primary audio input device selected there.
I suspect, though, you're looking for open-ended speech recognition, which NSSpeechRecognizer is not. If you're looking to transform any pre-recorded audio into text (ie, make a transcript of a recording), you're completely out of luck with NSSpeechRecognizer, as you must give it an array of "commands" to listen for.
Theoretically, you could feed it the whole dictionary, but I don't think that would work since you usually have to give it clear, distinct commands. Its performance would suffer, I would guess, if you gave it a bunch of stuff to analyze for (in real time).
Your best bet is to look at third-party open source solutions. There are a few generalized packages out there (none specifically for Cocoa/Objective-C), but this poses another question: What kind of recognition are you looking for? The two main forms of speech recognition ('trained' is more accurate but less flexible for different voices and the recording environment, whereas 'open' is generally much less accurate).
It'd probably be best if you stated exactly what you're trying to accomplish.