I am new to vb6. I am working to create the invoice generation application. I am using data report to show the generated invoice.
The step by step working of process is:
Entering the data in to Invoice and ItemsInvoice tables.
Then getting the maxId using (Adodc) from the data base to show the last generated Invoice.
Then passing the max Id as parameter to the data report which is showing the invoice according to the invoice id.
It is working fine when I first time generate invoice. Now for 2nd invoice without closing application I am getting a blank data report. For data report I am using dataenvironment.
I am guessing the reason the data report is blank is because there was no record for that Id, but actually the record is inserting in the database.
What is going wrong?
I'm not sure how your data set is getting configured, but it sounds like you have a single record in the data and aren't reloading it properly. If your report is manually moving through the recordset and only showing info based on the ID parameter you are passing it and then using the same recordset for the second report, you probably just need to MoveFirst on the recordset to put it back at the beginning.
Load the data environment and refresh the data report.
I am also generating report in the similar fashion. I faced this problem. Here's the solution
Load DataEnvironment1
With DataEnvironment1
'Command1 is the command added to data environment where you fire query or
'set it to point to a table
If .rsCommand1.State <> 0 Then .rsCommand1.Close
.Command1 maxid 'parameter you pass to the recordset
End With
DataReport1.Refresh
DataReport1.Show
Thats it!
You are done. I m sure it will work. Do tell me if it doesn't.
I don't know if the answer will still bother you, but if someone else have the same problem here is a example of how the problem works:
Imagine that there is a gate and a guard looking who is entering, when the first person (the first invoice) comes, the guard registers him, opens the gate (This is the event "Load DataEnvironmet") and then lets the guy pass. The guard believes that no one else would come and lets the door open (the instruction believes that the DataEnvironment ends and the value EOF becomes True), but when the second guy comes (the second invoice) the guard can't ask him who is (has, again, the value and lets it pass without registering him (this is the reason why the second invoice, and subsequent in while invoice would come blank). The solution is to close the gate ("Unload DataEnvironment") after a guy passes (After showing the data report).
The solution is the code given from Sangita above, but just before ending the sub you need to unload the DataEnvironment you were working on.
For me, it works. Sorry if the answer is not what you were looking for (and also if someone else can't understand what I'm writing, my English isn't very good). Just in case I will write the code with the solution
Load DataEnvironment1
With DataEnvironment1
If .rsCommand1.State <> 0 Then
.rsCommand1.Close
End If
.Command1 Value(ID)
End With
DataReport1.Refresh
DataReport1.Show
Unload DataEnvironment1
Try a refresh method like data1.recordset.requery or
Data1.refresh. This should work if you use data controls.
Related
totally new here & figured you guys will know the answer before I can even come near figuring this out.
I have a google form, feeding a live google sheet which users submit car reg numbers.
My goal is to have the reg number display the make, model besides the reg.
I have implemented an importXML function & the cell I expect to see the data loads up for a few minutes, then reverts to "N/A" or sometimes doesn't pull the data at all, but manually visiting the URL does return the data.
The import XML function uses a cell, made up of URL string, then adds the Reg/VIN input by form submission. That cell looks something like this "basicvehicledetails.com/reg" and returns the Class on the webpage relevant for Make/Model in separate cells.
I need the data to stay once it is returned, but don't know how to do that.
Another option is a car check website that requires a login, and then the reg to be input & searched before a webpage returns in-depth data on the car, is this something I can get to export to google sheet/excel spreadsheet?
I'm really stuck for this one, and would really appreciate any help as updating each car manually is painful.
try like:
=REGEXREPLACE(QUERY(ARRAY_CONSTRAIN(IMPORTDATA(
"https://www.motorcheck.ie/free-car-check/?vrm=152D1234"),5000,1),
"where Col1 contains 'dark-left'", 0), "</?\S+[^<>]*>", )
UPDATE:
=IMPORTHTML("https://www.cartell.ie/ssl/servlet/beginStarLookup?registration=152D1234",
"table", 1)
So I have a form and a table called Variables. The table is simply the fields VarID, VarDescription, and VarValue. It's only three items that are all network locations of things. The VarValue is the only thing that can be changed through the form, and thus it is the only thing validated. I validate those records on the form with the Before Update Event in the control by using logic such as:
If Me.VarID = 1 Then
If Me.Tex like "*:\* Then....
End If
If GetAttr(Me.Tex) = vbDirectory Then
End
End If
If Me.VarID = 2 Then
If Me.Tex like "*:\* Then....
End If
If GetAttr(Me.Tex) = vbNormal Or GetAttr(Me.Tex) = vbArchive Then
End If
End If
This all works great. However my issue comes in when multiple locations become invalid at once. I get stuck in one cell because the other VarValue's are invalid as well. How can I validate only the cell I have changed? I tried playing around with various Dirty and Focus events/methods, but those seem to be form specific, not cell specific.
This seems to just be a reference issue as I am looking on the database on two completely separate networks. The original uses all Office 16.0 libraries whereas the instance I was having the issue with was using Office 15.0 libraries. I played around with the original and it works fine, even if all the locations become bad at the same time.
Not sure if this a Mongoid specific thing or if applies to the greater active record pattern.
I have the following chunk of code, which works:
submission.reload.profile
submission.milestone = self.milestone
submission.profile = #profile
#profile.save && submission.save
The relation gets updated correctly. However, if I take out the first line (which I only arrived out through trial and error) it stops working and the relation does not update.
Why?
May be submission have some invalid attributes, when you reload, submission back to validate state and can be saved.
try p submission.errors after save without reload
This is not working as we discussed previously, for some reason and I have done is create some $vars for the uploaded file.
Code available here (Pastebin).
But never actually inserts anything
When doing a var_dump($csv_row) i get: bool(false)
var_dump($fh) shows: resource(89) of type (stream)
var_dump($insert_str) shows all 1700 records from the csv file (obviously too big to post on here)
So I’m guessing the while statement or the whole from if statement is wrong somewhere. Really really would appreciate some help on this, I need to get it working by tomorrow (monday)
You seem to be using the codeigniter database library wrong. I can see a
$this->db->set($insert_str);
but no $this->db->insert() to be found. The set() method only useful with an update() or insert() following it, See the docs, search for $this->db->set().
You either want to use the $this->db->insert_batch() (on the same doc page, unfortunately no direct links for sections) form and build up an array of arrays with your records (so you won't have to create a long sql string either).
Or you can use the $this->db->query() and just feed the $insert_str to it where you now call $this->db->set().
According to your question:
var_dump($insert_str) shows all 1700 records from the csv file
So i would rule out the possibility of the while loop or the if not working.
Put this code at the top of the controller or before reading csv file
ini_set('auto_detect_line_endings', true);
Check if this will work for you
I'm using Magento's built in Googleanalytics module which is working fine for page views, but not for conversions. The account is set up fine on Google, but it's not adding the addTrans part in the checkout/onepage/success page.
I've done a lot of digging this morning, and found that the observer does observe the "checkout_onepage_controller_success_action" correctly, and does indeed run. It does the following:
$block = Mage::app()->getFrontController()->getAction()->getLayout()->getBlock('google_analytics');
if ($block) {
$block->setOrderIds($orderIds);
}
I've done some echoing, and it does retrieve the block, and it also sets the order ids correctly. However, in the block itself, if I echo out $this->getOrderIds(); its empty.
My next thought was that perhaps it could be using two GA blocks on the page, and maybe its passing the data to the first one but echoing the HTML of the 2nd one, but I've no clue how to start checking that! The Googleanalytics.xml file only has one block it in, and I don't use that block name anywhere else!
Anyone experienced similar? Or have any idea where I can go from here?
EDIT:
The Ga.php block includes the transaction code if $this->getOrderIds() returns an array, which it is not doing. However, the observer is doing $block->setOrderIds($order_ids); which is passing through an array containing an order id. So the observer is passing the ids to the block, and the block is receiving them (setting up a method of setBlockIds and echoing out the argument, does show the array), but when the block tries to access its own data, it's suddenly not there ($block->getData() returns an array of properties but there is no order_ids property).
I also figured maybe it could be that its echoing the blocks HTML before setting the order id, so I added some variables in to check that and it's not that - its definitely setting the order_ids before trying to get them again, but its still not working!
I'm completely stumped! My only idea now is to modify the Ga.php block to use Magento's registry instead of it's own _data property, which is really not a nice way of doing it!
I think i've been an utter tool. Magento wasn't tracking conversions on the live site because I hadn't put the account code in the configuration part, but I had on my test site.
I had previously put my own analytics code in the template, so I had tracked page views.
When I saw no conversions (despite putting the account code in my test site), I started making orders on the test site and then viewing the source of the order success page. Firefox loads its source as a new request...which automatically goes to the empty basket page. So obviously, it wasn't showing the addTrans or anything, because it had already done that.
A quick check in firebug revealled it was working as it should.
So in the end, after a day of searching, I had to change "No" to "Yes" in the admin, and type in the account code. Great.