I am trying to run a website which has a mix of classic ASP and ASP.Net files along with lots of VB dlls used from the asp scripts. The site is setup and running correctly using IIS7 in Windows 7 professional machine. In order to setup debugging using Visual Studio 2013, I was following the instructions in the following SO post and installed IISExpress 8.0 to setup debugging. But whenever I am trying to attach the iisexpress.exe process hosting my site from the VS Attach to Process window selecting Script code, it is throwing an error and suggesting the VS installation as corrupted. Screenshot shown below:
Seems like a 32/64 bit issue but could not figure out exactly where is the incompatibility and how to fix it. Any help would be greatly appreciated.
There's a Microsoft Connect issue regarding the "corrupt installation (code 0x80040154)" error. It's for VS 2012 but maybe you're running into the same issue even though you have VS 2013, in which case simply repairing VS does not fix the problem.
The OP of the Connect issue said that he fixed the problem by completely uninstalling VS and removing all remnants of it, then reinstalling VS. The steps are:
Uninstall Visual Studio.
Remove these keys from the registry:
Visual Studio 2012:
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\11.0
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\11.0_Config
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\11.0
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\11.0_Config
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0_Config
Visual Studio 2013:
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\12.0
HKEY_USERS\.DEFAULT\Software\Microsoft\VisualStudio\12.0_Config
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\12.0
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\12.0_Config
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0_Config
Remove these directories:
Visual Studio 2012:
C:\ProgramData\Microsoft\VisualStudio\11.0
C:\Program Files (x86)\Microsoft Visual Studio 11.0
C:\Users\UserName\Documents\Visual Studio 2012
C:\Users\UserName\AppData\Local\Microsoft\VisualStudio\11.0
C:\Users\UserName\AppData\Roaming\Microsoft\VisualStudio\11.0
Visual Studio 2013:
C:\ProgramData\Microsoft\VisualStudio\12.0
C:\Program Files (x86)\Microsoft Visual Studio 12.0
C:\Users\UserName\Documents\Visual Studio 2013
C:\Users\UserName\AppData\Local\Microsoft\VisualStudio\12.0
C:\Users\UserName\AppData\Roaming\Microsoft\VisualStudio\12.0
Restart the computer.
Reinstall Visual Studio.
(I read elsewhere on the internet that it could be related to 32/64 bit incompatibilities, and perhaps that is the true cause in your case, but I'm inclined to think that VS got corrupted when you installed IIS Express.)
I have been trying to install Visual Studio 2010 Professional on my Windows 8.1 laptop and I am having problems. It seems to install and when I look at the applications list I see everything has installed except the Visual Studio 2010 (devenv.exe) application itself. Has anyone had this problem and found a solution for it? I have checked that .NET 2.0, 3.x and 4.x are all installed on the machine and active. The installer shows that it is installing the application but when it's completed the application is no where to be found.
I had the same thing happen to me, because I had SQL Server Data Tools installed, causing the shortcut to be named "sql server Data Tools". Try looking up the executable in C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe and manually creating the shortcut on the start screen:
Be sure to install the updates as well:
Visual Studio 2010 SP1
Visual Studio 2010 GDR for Team Foundation Server
Visual Studio 2010 Compatibility Update for Windows 8 and Visual Studio 2012
For an up to date list of patches and service packs see:
https://jessehouwing.net/vsts-tfs-connect-any-visual-studio-version/
This morning I faced a problem while opening my Visual Studio solution, and when I tried to run it, it said:
No exports were found that match the constraint contract name
How can I fix this problem?
I solved this problem by clearing Visual Studio Component Model Cache.
Just delete or rename this folder:
%LocalAppData%\Microsoft\VisualStudio\11.0\ComponentModelCache
or
%LocalAppData%\Microsoft\VPDExpress\11.0\ComponentModelCache
and restart Visual Studio.
The version of Visual Studio you have is specified by the number e.g.
Visual Studio 2012 is 11.0 (as shown above)
Visual Studio 2013 is 12.0
Visual Studio 2015 is 14.0
Visual Studio 2017 is 15.0
Visual Studio 2019 is 16.0
For those that don't know:
%LocalAppData%\ is the same as C:\Users\{yourUsername}\AppData\Local
For those who have multiple versions of Visual Studio installed, e.g. 2012 and 2013, it might help to remove the ComponentModelCache for both versions before restarting Visual Studio, e.g. 11.0 and 12.0.
No need to rename or delete the whole folder:
(%AppData%\..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache)
Just rename or delete the Microsoft.VisualStudio.Default.cache file inside the above location.
Visual Studio Express 2012 has different paths.
Visual Studio Express
...\Users\{user}\AppData\Local\Microsoft\WDExpress\11.0\ComponentModelCache
With Visual Studio Express 2012 for Web
...\Users\{user}\AppData\Local\Microsoft\VWDExpress\11.0\ComponentModelCache
I did not have to re-install Visual Studio Express
This will really work like a champ:
Solution: Try to delete ComponentModelCache folder from the below location.
[C:]\Users\[your user name]\AppData\Local\Microsoft\VisualStudio\[Visual Studio version number]
And after successful delete, recreate the folder with the same name, "ComponentModelCache".
This issue can be resolved by deleting or clearing all the folders and files from %AppData%\..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
This actually clears the Visual Studio component model cache.
On Windows 7 machines, the path is different. When you type %appdata% in Run dialog, it opens the folder C:\Users\<username>\AppData\Roaming.
Click the 'up' button to navigate to the parent folder and select the folder 'Local'.
Final path: C:\Users\<username>\AppData\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
Deleting the Component Model Cache did not work for me (well, the relative directory given above did not exist in my machine). Instead, I installed an extension to Visual Studio 2012 Express. Menu Tools → Extensions and Updates... → Online → Choose any and then download. This apparently invalidates the cache causing Visual Studio to rebuild it.
Here's my source.
For Visual Studio 2013 you need to remove that folder from this path:
%AppData%\..\Local\Microsoft\VisualStudio\12.0
for Visual Studio 2012 and later versions, the solution must be deleting the content of the folder ComponentModelCache:
C:\Users\[username]\AppData\Local\Microsoft\WDExpress\11.0\ComponentModelCache
Visual Studio 2013
C:\Users\[username]\AppData\Local\Microsoft\VisualStudio\12.0\ComponentModelCache
I had the same problem upon launching Visual Studio 2013 Ultimate, and the solutions here didn't work for me. I tried deleting the mentioned folders and starting Visual Studio again, but it didn't work.
However I had other problems too, like Microsoft.visual studio package did not load correctly and also Page '312e8a59-2712-48a1-863e-0ef4e67961fc' not found VS 2012. The latter refers to a message in the Team Explorer window saying "Page 'somenumber' cannot be found".
So I run devenv /setup on the Visual Studio command prompt with administrative rights. It did the job, and everything is fine now.
Remove ComponentModelCache folder content.
%AppData%..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
Clearing the folders didn't work for me. So I went to 'Programs and Features' and used the change button to startup the Visual Studio 2013 setup.
In the setup I choose the repair function and that fixed the problem for me.
I had the same problem with Visual Studio Express 2013 of Windows 8.1.
Unfortunatly there was no "ComponentModelCache" folder in
%AppData%..\Local\Microsoft\VisualStudio\12.0\ComponentModelCache.
I found the "ComponentModelCache" folder in
..\Users[username]\AppData\Local\Microsoft\WDExpress\12.0
and solved this problem by removing this folder from there.
If you have VS 2013, you have to go to: %LOCALAPPDATA%\Microsoft\VisualStudio\12.0
then rename the ComponentModelCache folder.
I experienced a similar problem after some updates released from Microsoft (part of them where about .NET framework 4.5).
On the Internet I got the following link to the Microsoft knowledge base article:
Update for Microsoft Visual Studio 2012 (KB2781514)
It worked for me.
This happened to me with Visual Studio 2013 Web, after Windows installed several updates. Unfortunately none of the suggestions in this thread helped.
I had to re-run the installer and select the "Repair" option. After that (and a reboot) it was working once again.
In some cases you may have to repair more than one version of Visual Studio. One example is when a Script Task control in VS 2013 opens VS 2012 when you click Edit Script.
Renaming the ComponentModelCache folder worked for me in Visual Studio 2015, but with a slightly different path:
%AppData%\..\Local\Microsoft\VisualStudio\14.0\ComponentModelCache
I have Windows 7 x64 with a second partition on which Windows 8 (preview installed). While working with Microsoft Visual Studio Express 2012 for Windows Phone, I come up with the same problem. But the ComponentModelCache is found here:
C:\Users\Jayaram\AppData\Local\Microsoft\VPDExpress\11.0
I am unable to delete or rename as I get the "access is denied" message when I try to use command prompt:
Administrator: VS2012 X64 CrossToolsCommandPrompt
This issue is because of a MEF cache corruption.
Installing the feedback extension (or installing any extension) will invalidate the cache causing VS to rebuild it.
click for source.
i experienced this problem in Microsoft Visual Studio Express 2012 for windows phone while trying to open file.
Then i browsed to
C:\Users\MyUserName\AppData\Local\Microsoft\VPDExpress\11.0\ComponentModelCache
And Inside ComponentModelCache i deleted Microsoft.VisualStudio.Default.cache CACHE file. Finaly i restarted visual studio and reopened my project.
Then my problem was solved, i was able to open file.
Note: My OS is windows 8. And i installed SDK 8 for developing windows phone app
Thanks
I am using Visual Studio 2012. After installing the Visual Studio 2013 web express, when I want to run or open any project in Visual Studio 2012 it shows me the following error:
"no exports were found that match the constraint contract name".
I also tried the above solution for clearing the ComponentModelCache,
but I did not find the folder. I solves my problem just by: Repair Visual Studio 2012
For the Express versions of the software, the folder you need is in a slightly different place(s): For Express 2012 for Web it is C:\Users\XXXXXXXX\AppData\Local\Microsoft\VWDExpress - not in the Visual Studio folder.
I got an error with the same error message - two years later.
It's a different problem this time though, related to .NET Core dnx things.
I couldn't find an answer on Stack Overflow, but there's a GitHub issue that contains a workaround: https://github.com/aspnet/Home/issues/1455
Below is the most important part of the workaround:
Delete the entire C:\Program Files (x86)\Microsoft Visual Studio
14.0\Common7\IDE\Extensions\Microsoft\Web Tools\DNX directory. (As far as I understand, it belongs to the old version of ASP.NET Core
RC1, which for some reason is still shipped even with Visual Studio 2015 Update-3).
Delete the C:\Users\<user>\AppData\Local\Microsoft\VisualStudio\14.0\devenv.exe.config file.
Run the Developer Command Prompt for Visual Studio 2015 as Administrator, and execute the devenv /setup command. The new devenv.exe.config file is generated. This time there are many assemblies that refer to the
C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\Extensions\Microsoft\DotNet directory.
Run the Visual Studio 2015 and check that it shows the Microsoft .NET Core Tools (Preview 2) 14.1.20624.0 in the Help => About Microsoft Visual Studio menu.
Thanks to olegburov's post on GitHub for figuring this out.
I had to uninstall some external components like Postsharp and Apex and then it worked. I also tried the chosen solution but it gave me more errors.
Deleting the folders haven't worked for me i have go control panel and repaired
Visual Studio Installer Projects extensions for VS 2013.
And it worked for me
I got this error after reinstalling IntelliJ IDEA and ReSharper for C# in Visual Studio 2013.
First, I got an error problem with extensions, and after this I got this error:
"No exports were found that match the constraint contract name”
I simply removed folder ComponentModelCache and resolved this error.
My 2 cents:
Following all above lifesaving tips, I had a slightly different experience; mine is VS 2017 Community Edition, installed once, and I notice that have all these 3 folders:
%LocalAppData%\Microsoft\VisualStudio\15.0 ==> Empty
%LocalAppData%\Microsoft\VisualStudio\7f0c75b0 ==> has only the CoreCon folder
This is the one that has the ComponentModelCache:
%LocalAppData%\Microsoft\VisualStudio\15.0_7f0c75b0
Deleting only the Microsoft.VisualStudio.Default.cache had no effect.
So, I deleted all 4 files there: .cache, .err, .external and catalogs.
On restarting VS, problem gone and appeared a 5th file:
Microsoft.VisualStudio.Default.scan
Removing ComponentModelCache did not work for me. Reinstalling VS 2019 did thanks to a recommendation on this Microsoft support thread.
Details
This seems to be a known bug with a fix incoming from MS (as of 1/7/2020)
Experienced after upgrading from VS2019 Pro 16.2 (i think it was?) to 16.4.2 using Visual Studio Installer
Error displayed when trying to launch both nuget console and nuget package manager
I installed the free version of ApexSQL which is awesome in SSMS, but I really don't want all those menus in Visual Studio. I went to add-in manager and unchecked them, but the Startup column is checked and disabled so every time I restart Visual Studio they come back.
Is it possible to permanently remove the ApexSQL menus from Visual Studio?
If you have ApexSql installed and you don't want those pesky menus in Visual Studio do 2 things.
In Visual Studio, go to Tools > Add-in Manager and uncheck the ApexSql addins. Close Visual Studio.
In Windows 7, there's a hidden folder C:\ProgramData. In Windows Explorer go to C:\ProgramData\Microsoft\MSEnvShared\AddIns folder. Edit each of the *.MsvsLoader.Addin files and set <LoadBehavior> to 0. If you can't save the files directly, you'll have to save the files to a different location (desktop maybe) and then copy them back into C:\ProgramData\Microsoft\MSEnvShared\AddIns because there's some Admin privilege required.
Now when you restart VS those ApexSQL menus should be gone
The issue of crowding menus is resolved in latest releases, now all ApexSQL add-ins are under the main ApexSQL menu as sub-menus. They look like this now:
If you don't need ApexSQL add-ins in VS or SSMS you can simply choose not to integrate them with VS or SSMS during the installation, just check out SSMS ot VS version in which you want the add-ins integrated
Note: To get this dialog in which you can check the wanted integration you need to use individual installers not the main one. You can find all individual installers on this link
Disclaimer: I work for ApexSQL as a Support Engineer
For Visual Studio 2010 on Windows 7, I attempted #Chris Bayles suggestion and do not see ApexSql addins under Tools->Add-in Manager.
I followed #Jerome2606's pointer to https://knowledgebase.apexsql.com/remove-add-ins-just-visual-studio-retaining-sql-server-management-studio/ and it worked for me, but only when I removed the parent ApexSQL folder as well.
Summary of what is required to do:
Remove folder
C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\Extensions\ApexSQL
Depending on the version of Visual Studio, the version number in the default installation location will be different:
Product name Version number
Visual Studio 2010 Microsoft Visual Studio 10.0
Visual Studio 2012 Microsoft Visual Studio 11.0
Visual Studio 2013 Microsoft Visual Studio 12.0
Visual Studio 2015 Microsoft Visual Studio 14.0
Select and delete the ApexSQL folder and its contents.
Open Command Prompt as an administrator, then run
"C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe" /setup
Please note the command is different for Visual Studio 2012, 2013, and 2015.
If you are using SSMS v18.0 then you can disable the apex features in following way.
You can find the ApexSQL.Complete.Addin.SSMS18.pkgdef file from following path.
C:\Program Files (x86)\Microsoft SQL Server Management Studio 18\Common7\IDE\Extensions\ApexSQL Complete
Then open this file in Notepad++ Administrator mode and comment the content.
If you need further reading follow this link.
https://knowledgebase.apexsql.com/remove-apexsql-tools-sql-server-management-studio/
I want to install Visual Studio 2005 on my machine which already has Visual Studio 2010?
Please help me out.
Bharat
It can easily be done -- My other laptop has VS 2005, 2008, and 2010 all on the same drive. The two versions shouldn't interfere with each other. Visual Studio even has a "version selector" that gets registered as the handler for project and solution files, and IIRC it should launch the correct version of VS for whatever project you're in at the time. But even if it doesn't, you can always right-click and "Open with...".