When I press F5 the project compiles, and the new web page launches. However, the silverlight control loads (the standard load counter counts to 100%) but then the whole control just disappear. Only the left default menu bar (feedback etc) is visible. It's a very small project, my first actually. This also happened earlier today, but then I removed each thing one at a time and found that it was some radio buttons that caused it. I deleted them and remade them and it ran fine again. Now the same thing happened again, but it is something else, not sure yet. The question is; is this a familiar bug or am I just doing something wrong? My code-behind consist mostly of visibility changes, around 20 lines of code.
I'm not sure why this happened to me, but the error stopped occurring when I used states instead.
Related
I have BIG problem. I spent hours creating a form and yesterday. I do not know what happened or what I clicked on but when I ran the program to see if my code works. the form was completely GONE. Every button, datagrid was gone.
So I thought I have to start again? but wait, the buttons and datagrid and labels I used apparently already existed. My code is still the same. I think it might be the
InitializeComponent();
I am not sure. WHY did this happen. HOW can I get my previous design back, is it possible? The code I used before was exactly the same. The code did not get deleted.
Thank you
Edit: I see "Silverlight -" is in front of my question, which I realize may have something to do with the alphabetical order of my tabs... really Visual Studio 2013 should be in front, anyone know if that can be changed?
I've been using the newer Visual Studio 2013 for about a week now, and I've found some quirks with it. The one that seems to happen the most is when I'm in the XAML editor working on something, suddenly if I go over to the property window I can't enter anything. I'm not running/debugging. I can type stuff in the regular XAML code editor window.
Even stranger, one of the times, I could get the cursors to appear in the fields. I typed a bunch of junk and just one character from what I types appeared. Another time I couldn't enter values into the properties, but I could double click on an event in the events window and create a new event handler. Just a minute ago I had the opposite, where I couldn't double click in the events window.
I think VS 2013 introduced async handling of more things, could it be related to that? Or perhaps because I'm using Silverlight? Right now my only workaround is to restart VS, does anyone have any knowledge about this? Anyone else experienced this?
I'm going to submit a bug report, but it would be a while before there's a patch, so I'm wondering if maybe someone understand the problem better and has a workaround? Or maybe just confirm that this exists and that I'm not crazy/my computer's haunted.
Edit:
I should mention another weird thing that happened two nights ago. I thought it was some how my doing, but I never figured out how I could have managed it without noticing. I was working on a piece of code, went to run after changing a few lines, and suddenly I had a ton of compiler errors. I go over to a user control I haven't touched in hours and suddenly the main LayoutRoot grid is completely empty. Luckily I'd committed to source control, but still...
I found an easy way to deal with this problem. It happens a lot after debugging so what I did was I created a batch file on my desktop containing this line taskkill /f /im XDesProc.exe and I run it every time the properties start misbehaving. Its the quickest way to reload the designer's functionality. I submitted this bug to microsoft they claim it will be included in the next update.
Me and another guy are developing a silverlight app and having the same exact problem. I accidentally found where the bug lies and how to mess with it to allow you to type "very briefly". Apparently this has something to do with tooltips. If you hover over anything in the property window when this bug is happening and allow a tooltip to popup while your cursor is blinking in a field, for the duration that the tooltip is up you can resume typing normal. As soon as the tooltip times out and disappears you can't type. So the only way you can edit or search properties is while a mouse tooltip is floating active. Very unusual. Can't seem to find any kind of tooltip settings in the program and the situation is very hard to find on google because search results assume your talking about programming tooltips. As far as I know we have had this issue since before release candidate. We are currently on official update 1 with the same problem persisting.
I've recently upgraded from Xcode 4.3 to 4.4 and I'm about to bash my screen in with frustration.
The problem I'm having is with the code completion. As I type a variable or method name, the completion window pops up with the suggestions like it's supposed to. But if I attempt to use the cursor keys to scroll between the suggestions, the suggestions disappear and the cursor moves in the code, not between the suggestions. If I press enter to accept the default suggestion, it again dismisses the suggestions and inserts a return into the code taking the cursor to the next line.
This doesn't happen every time I attempt code completion, but it does occur more often than not. For a given name I'm trying to complete, it either works or it doesn't (e.g. if I press escape to get the suggestions back, it will disappear just as quickly as the first time it disappeared for that line/name I was trying to complete). When I get to the next line of code, it's a whole new bet whether it will work or not. It seems that the closer to the actual completion of the name I am, the more likely it is to actually work and accept the suggestion or move between the suggestions. Sometimes, if I act quickly enough, I can move the highlighted suggestion one or two lines before the suggestions disappear. I'm aware that if you don't select a suggestion quickly enough that it's supposed to eventually remove the suggestions (on the order of several seconds), but this behavior is not what I'm describing. I'd be VERY happy at this point if I had a single second to actually respond and select a suggestion from the pop-up.
So far I've tried a clean of the project, deleting all of the project's derived data, and restarting xcode. All of which don't seem to affect the behavior. Any ideas? I've searched stackoverflow and google and haven't found any other people reporting this problem ...
Thanks for any ideas,
Will
UPDATE:
After upgrading to the XCode 4.6 release version (and 4.5 somewhere in the middle there), this problem is still present ... and making edits in the left/main editor window is still a work-around.
I am seeing the same with Xcode 4.4.1. It seems to be related to where the completion window pops up. Debugger pane open or closed does not change anything here.
When in the Assistant Editor trying in the right pane the completion windows flickers. Same line of code in the left window works fine. Single editor works, too.
Try upgrading to Xcode 4.4.1. I used to have this problem, but I don't seem to have it after upgrading.
If this doesn't solve the problem, a crude workaround seems to be to put a lot of blank lines at the bottom of each file - the problem seems to occur from frequently when the file is scrolled all the way to the bottom.
There is a fix (at least Xcode 4.6.3): re-create the affected file by deleting it. Now create a new file and copy the content to it and drag it into the project - done. Fixes the issue here. It seems to be tied to certain files.
I have a weird situation on a winform project.
I have user control (with 600 lines of code around) with a datagridview. I change de ColumnHeaderStyle of the font and save it. After I save the file I close it and open again, the changes were not saved (although the asterisk is dissapeared), because the ColumnHeaderStyle is back to the former value. This is driving me crazy because I cannot change any visual thing in the Designer.
Any clue?
Thanks in advance.
I've had occasional very strange behaviour with VS2008 developing WinForms apps too. Mostly designers that won't display (even though nothing has changed), but I've had cases of disappearing controls, too (and hence compilations that won't complete since code then refers to controls that are no longer being created). All very irritating.
Assuming that you've done all the standard things, like Cleaning the solution (on the Solution's context menu), deleting all the relevant Bin and Obj folders (no idea why this would cures VS weirdnesses, but it sometimes does) and rebuilding (ensuring that the Designer for your user control is closed when you rebuild)...
... you might try looking through the designer code for some strange 'bonus' controls that apparently have nothing to with you.
In one particularly intractable case, I eventually noticed some controls with names like Button_01, Button_02, etc, whose origin I couldn't identify. They were being defined but not instantiated, and not being added to any controls collections, and I just deleted all references to them.
When I recompiled, they didn't come back, and VS was behaving itself again.
I can't explain it, but it worked that time, and I offer it as an example of VS gremlins that seem to have rather irrational solutions.
Maybe it was just a strange planetary arrangement that did it, I guess I'll never know.
I still have to use the VB6 IDE.
Unfortunately every time I start the IDE one of the buttons of the toolbar disappears. Almost always it's the Run button which goes first. Sometimes also items from the menu bar or the context menus are missing.
I have to reset the toolbars almost every time I start the IDE (Which is quite often during a typical work day). Recently I bought an IDE plugin which modifies the menu bar and requires a restart after every reset of the menu bar. (Otherwise it would crash)
I could live with just the resetting, but the restart is really annoying.
Is there something I can do?
To solve this problem:
Unload all add-ins.
Right-click on a toolbar and select the Customize... menu.
For each toolbar click the Reset... button (6 times in total).
Reload the add-ins.
For me action 3 was enough.
cf. MZTools faq (thanks to Andrea Bonafini), but these steps are originally from MSDN
It sounds like you recently bought a bad add-in. Can you get your money back? Every time I've had problems with disappearing controls in the IDE it has been due to a bad add-in. You can find out which one it is by disabling them, one by one, each time using the IDE for a while, then re-enable it and disable the next one, until the problem stops.
I still use one problematic add-in. It exhibits behavior similar to yours in that it makes the run button disappear. I avoid the problem by only loading the add-in when I need it, use it (it formats code), then I immediately unload it. If you don't use the functionality of the add-in that often, this could be an acceptable workaround.
Yea, i have this same problem with one of the add-in. But if you reset it. Shut the IDE down and open it back up again without doing anything, the IDE shouuld be able to retain the previous clean setup.
It's just guest, but:
Each graphical element on IDE (like button) is kind of resource (i.e. GDI handle).
Maybe your VB app doesn't manage these resources good enough and after sometime VB IDE cannot redraw elements like buttons (run is used often).
Also, maybe some IDE add-in is in conflict with some other add-in/application and breaks something -- I have this problem with Clip-X and MZ-Tools.
I had a similar problem when I was setting up the IDE to use for the first time, though it may not be helpful if you've been using the same IDE for a while. When I first started using the IDE, I would modify the toolbars and then close the IDE. When prompted if I wanted to save the open file I always said No, since the file was just a dummy file I was using to open the IDE with. Turns out the IDE was saving the toolbar preferences with that file, so they never got saved.
Try opening a file, customizing the UI, saving the file, then closing without modifying the code. This was the solution for me.
I've tracked down the problem and as suggested it was an add-in.
The problem went away as soon as I disabled the Visual Basic 6 Resource Editor.
How to restore your VB6 IDE without reinstalling:
Run Regedit
Find the entry for Visual Basic 6.0
Export your settings in case things
go wrong
Delete the 'UI' setting
Run VB and you will have your popup
menus back
The 'Find' button disappeared from my VB6 toolbar forcing me to select the Edit menu to use Find. I had two add-ins enabled: vbCodePrint and ResourceEditor; so I did away with both of them, turned VB6 off and back on, then put both add-ins back in and my button returned.
If you're still using the VB6 IDE, and I do amongst others, then this problem is not likely to have gone away. I use VB6 in Windows 10, and the problem is still there. But it doesn't affect me anymore.
I have had this problem a few years into using VB5 and VB6. Today, if I start VB6 directly, it may work fine the first time, but buttons will go missing the second time -- ALWAYS.
My solution, which I developed from day one:
Do whatever needs to be done to restore all your buttons. Save the Visual Basic 6.0 registry settings to a file, as suggested previously, and only keep the UI entry. Sometimes, you have to exit VB6 for it to post changes to the registry. So if this doesn't work the first time, try exiting before saving the settings.
I use my own program to launch VB6, which automatically copies my VB6 registry backup back into the registry -- by calling "RegEdit.exe /S D:\VB\IDE_Fix.reg" -- before I launch the IDE . This works every single time, and requires no action on my part.
If you read this, that means you are a programmer. You can make this work by yourself.
Mike
Reinstall,clean registry and update with SPacks etc....