The framework I'm using on my project follows the MVC Pattern. I"M building JSON feeds and need to structure them in a different way then what the system gives me by default from the ORM. Where should I be handling the task of mangling and shaping my data that I'll serve up, in the model, view or controller?
Right now I'm doing it in my controller, then passing that data to the view. I can see this fitting better under the Model or the View but not sure which one.
If this different structure is only relevant to the view, you should keep it in the view.
If this structure is used in more than one view, make a Helper for it.
Internally your app should standardize on one data format, so models should always return a standardized format. If you were to do something with that data in your controller, you'd need to change the logic for interacting with the data just in that one controller function, which in this case doesn't make much sense. If you later decide to change the format in the model, you'd also need to change code in the controller that interacts with it. Don't create dependencies when there's no advantage to do so.
I'd write a model method to do it if I were you. Having it in the controller will make your controller fat, which is bad, and means you can't call that functionality from other controller actions or anywhere else. Although it could be considered presentation logic, I prefer to keep my views really simple with just conditionals and iterators at most. There may be an argument for having it in a helper, but I'd still stick with the model.
Related
While working with Unity, I realized that separating Model and View would make my code more readable and straightforward. Constructing the whole model, all I had to do is just create some UI and bind it to Model.
But I still don't understand what 'Controller' is, and why does it exist. I don't think I had trouble when I directly bound View to Model, not through Controller.
So the question is if we can bind View to Model directly, why do we need Controller? What's the benefit of having Controller between Model and View?
At the highest level the Controller is the link between the View (displaying the UI/UX) and the Model (creating and managing your database and its tables).
True, it is possible to write code without any Controller usage but your Views will quickly get very cluttered and each file will be full of logic that is much more nicely stored somewhere else hint hint.
The Controller (and Model and some other places such as helpers) is thus the perfect place to sort out all the back-end code so that all you need to do is send a single field or object to your View to display.
An example is somewhat painful because by its nature the Controller is where you go to sort out your code as things get more complicated but this is a great article to get you on the right track! HTH
https://www.toptal.com/unity-unity3d/unity-with-mvc-how-to-level-up-your-game-development
I don't have years of experience, but in my understanding controllers provide a bridge across view and models. While view contain the pretty part and models contain useful parts the controller do the calls of functions passing values from database to view or inputs to model. That provide a way to avoid lots of injection like class A calling class B, calling class C, etc.
You can put rule business in controllers or in view, but thats not the expected in MVC architecture. The first important thing (for me) in software programming is readability, whats MVC provide.
if you've interest, search for other architectures like MVVM, to compare then.
Is it a good practice to use Spring Controller class(with #ModelAttribute) and the jsp to prepare model at the same time or the model has to be prepared only by Spring and the view from the jsp?
The idea comes from this topic . I have a Controller class:
#RequestMapping(value = {"", "/"}, method = RequestMethod.GET, params = "mode=create")
public ModelAndView showCreatePage(#ModelAttribute("createForm") ApplicationCreateForm form)
{
return customMethod("some string");
}
and in my jsp I have:
<jsp:useBean id="createForm" scope="request" class="com.example.ApplicationCreateForm"/>
I do not need to populate the form with the information to be present to the user all fields are empty.
So from what I uderstand I have been declared ApplicationCreateForm bean twice, with the same scope - request.
Is it a good design practice to use both at the same time? Is there a reason for that? Does the second declaration(in jsp) give me more power, for example to override the model or it is complete unnecessary? Does the second declaration overrides the first one when both are present?
There are many things wrong with this implementation.
Is it MVC?
If JSP know about Model, why do we need controller. Lets remove the routing engine and use JSP directly to consume Model. But then the application will be monolithic. I believe you do not want that. We have two major flavours of MVC. In both, controller is the front facing object. It receives the command, interprets it, works with data layer and gets Model. If required the Model gets converted into a viewModel and then this object is passed to the view.
Why viewModel?
Say we are implementing paging on screen. We are showing list of persons. Person is your model here but your view also need to know page number, page size etc. Your model thus may not fit directly in this case.
Say we need data from multiple tables to shown on screen. This data is related in some way. Now will you pass separate model objects to view and let it do all the business logic? Ideally no.
Should not the design support DTO or ViewModel or Commands and Queries?
We want our application to be designed properly. As stated above we need to send data to view or clients (REST) after processing. Processed data may not map to you domain until unless we are just creating a CRUD stuff. What if you want to implement CQS or CQRS?
Where is separation, where is SOLID?
If my view is performing business logic then where is 'S'? If view knows about model and need to be changed in slightest of changes in model then where is 'O'?What if I want to separate queries from command (CQS) and scale the two things separately?
To conclude I would say, yes you can do this but it is not good if you are developing a decent size application or you think it will eventually be one. I have seen people using model entities starting from ORM, to controller to view. It will work but the question is do you want a monolithic and tightly coupled application. As per my experience the presentation logic (view) has very different logic and need of data in comparison of controller and same goes for your data access layer.
I think you should prepare your model fully in spring controller. Then view should be as passive as possible, ie. only showing model attributes received from controller while having no further knowledge about application logic. This approach gives you clean separation of concerns and you view is as independent as possible and can be easily switched for different view technology - eg. thymeleaf or freemarker templates. The whole idea of MVC is to separate presentation layer and by leaking business logic to view you create unnecessary dependencies.
Your view should be as simple as possible, as the logic leaked to view makes it very hard to test and reuse. On the other hand, if your logic is nicely separated, you can test it easily and reuse it easily. Ideally, business logic should be completly independent on web environment.
By defining you are creating tight coupling between your view and class com.example.ApplicationCreateForm, using spring mvc you achive loose coupling between your controllers, view and model it might happen that you change you model name but you still have same properties in it which might be enough for view, in above case you will need to update your view but it won't be required in case you are using Spring MVC.
Since spring comes with the concept of making things loosely coupled to make your code more testable, you should always keep in mind that separation of concern is your priority. So it is always the best practice to prepare your model fully in Controller, not in views.
Keep thing simple , make your controller responsible for preparing your model, and keep your views to display the model only.
So, a big NO to your question. The second declaration isn't going to make you powerful, rather help you to be tied up.
Could anyone give an example of why it would be advantageous to use MVC instead of a simpler Model and a View only.
Note: whether it's called MVC or MVP (Model-View-Presenter), I'm talking about the one where the View receives input, then the Controller will respond to the input event by interpreting the input into some action to be done by the Model. When the model changes, the View will update itself by responding to events from the model.
What is disadvantageous of simply letting the Model respond to events in the View and vice versa?
In MVC, if I changed the model in a way that affects the controller then I'll have to do changes in the controller. In Model-View, if I change the Model, I'll have to update the view.
So, it seems like we are introducing complexity by adding the "controller" part?
In MVC, the Model is blind to its environment, the view can be too - passing off (blindly) its events to the controller, which knows more about the view and model. So when all is said and done, the controller is the 'non-reusable' disposable part of the system, since it is the most context aware component.
if I changed the model in a way that affects the controller...
The the model should expose simple CRUD methods in such a way that those using the methods do not have to know anything about the passed update object, nor what really happens inside the model.
This means that the view, IMO, has to do a bit of work by creating the passed record, since Controllers are supposed to be stateless and the view is more persistent. Controllers get triggered and 'kick-in' do their work with a passed object and do not have a state.
The passed data is created by some sort of generic convention.
Let me go even further. Suppose you have a view, a tablegrid, and a control whose enabled property is dependent on item is selected in the grid -- you COULD create a view that handles both those controls and this logic internally, and that would probably be the way to go in such a simplified example.
But the more atomic your views are, the more reusable they become, so you create a view for every, yes every, control. Now you are looking at a situation where views have to know about each other in order to register themselves for the right notification...
This is where the controller steps in, since we want to stick all these dependencies onto him, the long term disposable one. So the controller manages this type of view-to-view notification scheme.
Now your views are ignorant as they can be and independent, thus reusable.
You can code a view without having to know about the system, or the 'business logic' as they like to call it. You can code a model without having to know too much about your goals (though it does help to tweak the model to enable it to return the datasets you have in mind).... but controllers, they are last and you have to have the previous two firmed up before you can wire things together.
Here is another thing to think about -- just as the Model is supposed to abstract-away and provide a generic interface to the underlying implementation of the data it is managing (the client does not know if the data comes from a DB, a file, a program setting, etc) -- the view should also abstract away the control it is using.
So, ultimately this means a view should not (caveat below) have functions/properties that look like this:
public property BackgroundColor{get;set}
Nor
public function ScrollBy(x,y){}
But instead:
public SetProp(string name, object val){}
And
public DoCmd(string name, object val){}
This is a bit contrived, and remember I said ultimately... and you ask why is this a good idea?
With reusability in mind, consider that you may one day want to port things from WinForms to, say, Flex, or simple want to use a new-fangled control library that may not expose the same abilities.
I say 'port' here, but that is really not the goal, we are not concerned with porting THIS particular app, but having the underlying MVC elements generic enough to be carried across to a new flavor -- internally, leaving a consistent and ability-independent external interface intact.
If you didn't do this, then when your new flavor comes along, all your hard references to view properties in the (potentially reusable/refactorable/extendable) controllers have to be mucked with.
This is not to mean that such generic setters and cmds have to be the interface for all your views abilities, but rather they should handle 'edge case' properties as well as the normal props/cmds you can expose in the traditional hard-link way. Think of it as an 'extended properties' handler.
That way, (contrived again), suppose you are building on a framework where your buttons no longer have buttonIcon property. Thats cool because you had the foresight to create a button view interface where buttonIcon is an extended property, and inside the view your conditional code does a no-op now when it receives the set/get.
In summary, I am trying to say that the coding goals of MVC should be to give the Model and View generic interfaces to their underlying components, so when you are coding a Controller you don't have to think to hard about who you are controlling. And while the Controllers are being (seemingly unfairly) set up to be the sacrificial lamb in the long run of re-usability -- this does not mean ALL your controllers are destined for death.
They are hopefully small, since a lot of their 'thinking' has been shoved off into semi-intelligent Models and Views and other controllers (ex: Controller to Sort a Grid or Manipulate a TreeView) -- so being small they can be easily looked at and qualified for reuse in your next project -- or cloned and tweaked to become suitable.
It actually reduces complexity by separating the workflow logic from the domain logic. It also makes it easier to write unit tests and makes your application easier to maintain and extend.
Imagine if you wanted to add a new data type. With the approach above, you would probably duplicate a lot of the workflow logic in the new class as it would be likely to be tightly coupled to the domain logic.
The discipline involved in separating the workflow logic into the controller makes it more likely that you will have fewer dependencies between workflow and domain logic. Adding a new data type would then be more simple, you create the new domain object and see how much of the controller you can reuse, e.g. by inherited from a controller super class.
It would also make it easier to change frameworks in future - the model would probably not change too much and so would be more portable.
Having said that, you might want to look into MVVM depending on what you are using as your presentation layer: Benefits of MVVM over MVC
Advantages of MVC/P (I am talking about Supervising Controller here) over MV include:
You can handle complex data binding code in the controller, if required.
You can test that complex presentation logic without a UI testing framework.
You can also have a graphic designer make your views, and not see your code, and not mess up your code when they fix your views.
Hey guys - here's a question on Zend Framework or better on MVC in general:
I am asking myself for a quiet a long time now, if it is a good idea to push business objects (User, Team, etc.) to my views or if it would be better just to push dump data containers such as arrays to the view for rendering.
When pushing business objects to my view I have a much tighter coupling between the views and my domain model, however, the view could easily do things like foreach($this->team->getUsers() as $user) { ... } which I personally find very handy.
Providing domain model data in dumb arrays to me looks more robust and flexbile but with the costs of that the view cannot operate on real objects and therefore cannot access related data using object's method.
How do you guys handle that?
Thanks much,
Michael
It's better to make your View access a Domain Model object in an object-oriented manner, instead of using the Controller to convert Model data into plain scalars and arrays.
This helps to keep the Controller from growing too fat. See the Anemic Domain Model anti-pattern. The Controller only needs to know what Model to instantiate, passes the request inputs to that Model, and then injects the Model into the View script and renders. Keep in mind that a Domain Model is not a data-access class.
You can also write View Helpers to encapsulate a generic rendering of a Domain Model object, so you can re-use it in multiple View scripts.
Your View should accesses the Domain Model only in a read-only manner. View scripts should not try to effect changes to the Domain Model.
You can also design your Domain Model to implement ArrayObject or other SPL type(s), as needed to make OO usage easy in the View script.
It's true, a large driving motivation of MVC and OO design in general is decoupling. We want to allow each layer to remain unchanged as the other layer(s) are modified. Only through their public APIs do the layers interact.
The ViewModel is one solution to abstract the Model so that the View doesn't need to change. The one I tend to use is Domain Model, which abstracts the details of table design, etc. and supplies an API that is more focused on the business rather than the data access. So if your underlying tables change, the View doesn't have to know about it.
I would expect that if there's a change to the Domain Model, for instance it needs to supply a new type of attribute, then it's likely that your View is changing anyway, to show that new attribute in the UI.
Which technique you choose to decouple one layer from the others depends on what types of changes you expect to be most frequent, and whether these changes will be truly independent changes, or if they will require changes to multiple layers anyway.
The "standard" approach would be to completely prepare the model in the controller (e.g. fetch all teams, including users) and then send that to the View for presentation, but you are not bound by that. The data structures can be whatever you want it to be: Array, ArrayObject or custom Classes - anything you deem appropriate.
I dont use Zend framework, so this is in repsonse to the general MVC Have a look at the ViewModel pattern.
http://www.lostechies.com/blogs/jimmy_bogard/archive/2009/06/29/how-we-do-mvc-view-models.aspx
I'm comming from a .Net MVC point of view but I believe the concepts will the same.
I will do all my view rendering in the controller bascially like below
model only output dataset/objects (this should contain the most code)
controller assign view and add necessary HTML and make use of models
view only contains placeholder and other presentation stuff and maybe ajax call
So my team can work on each part without interrupting each other, this also add some information security to the project i.e no one can retrieve all the working code they only communicate by variables/object spec.
I've decided to make a big push towards MVC for all new sites I make. I have a question about whether or not you can have any processing on the model level.
The case that brought up this question is a video site. I have a Video class (model) and one of the things I need to do when a user views the video I need the view to be logged in the database. I'm not sure if I need to add a query in the controller or if I can add a addView method in the Video class.
The basic underlying question for me is what kind of methods am I limited to in the models? Can it be anything or does it have to be only accessor (a.k.a getValue/setValue) methods?
Ruby on Rails has the motto skinny controller, fat model. This doesn't apply to just Rails and should be practiced with any mvc framework.
I think your model is exactly the place to handle this. Now, your model is necessarily composed of just your entity classes. Your model, in my opinion, would include your entities as well as any business logic that you need to implement. Your controller should just be handling I/O for the view, invoking model methods to accomplish the actions invoked by the user via the user interface (view).
Here how I would do this. It should be valid in pretty much any language.
The View would initiate a method call to the controller's OnView() method, then display whatever the controller spits back to it (in a controlled way, of course... I'm thinking your view is going to contain a video player component, so you're going to get a video of some kind back from the controller)
In your controller, have a method OnView() that does 3 things: instantiate the Video object (i.e. uses your data layer to get a model object), call the updateViewCount() method on the Video object, and display the video (by returning the Video object to the View, presumably).
The Video model object contains data representing your video and any houskeeping stuff you need, which includes updateViewCount(). The justification for this is that a Video has a view count (aggregation). If "view count" needs to be a complex object instead of just an integer, so be it. Your data layer that creates Video objects from their primitive representation on disk (database?) will also be responsible for loading and creating the corresponding view count object as part of the creation of the Video.
So, that's my $0.02. You can see that I've created a 4th thing (the first three being Model, View, and Controller) that is the data layer. I don't like Model objects loading and saving themselves because then they have to know about your database. I don't like Controllers doing the loading and saving directly because it will result in duplicated code across Controllers. Thus, a separate data layer that should only be directly accessed by Controllers.
As a final note, here's how I look at views: everything the user does, and everything the user sees, should go through the view. If there's a button on the screen that says "play", it shouldn't directly call a controller method (in many languages, there's no danger of doing this, but some, such as PHP, could potentially allow this). Now, the view's "play" method would just turn around and call the appropriate method on the controller (which in the example is OnView), and do nothing else, but that layer is conceptually important even though it's functionally irrelevant. Likewise, in most situations I'd expect your view to play a video stream, so the data returned by the controller to the view would be a stream in the format the view wants, which might not necessarily be your exact Model object (and adding that extra layer of decoupling may be advisable even if you can use the Video object directly). This means that I might actually make my OnView method take a parameter indicating what video format I want to get back, or perhaps create separate view methods on the controller for each format, etc.
Long winded enough for ya? :D I anticipate a few flames from the Ruby developers, who seem to have a slightly different (though not incompatible) idea of MVC.
Since you can use whatever model code you want with MVC (not just limited to LINQ) the short answer is yes. What should be done in the model is perhaps a better question. To my taste, I would add a ViewCount property (which probably maps to a column in the Video table, unless you are tracking per user in which case it would be in the UserVideo table). Then from the controller you can increment the value of this property.
With MVC, people seem to be struggling with fitting four layers into three.
The MVC paradigm does not properly address the data storage. And that's the "fourth layer". The Model has the the processing; but since it also addresses the data, programmers put SQL in there, too. Wrong. Make a data abstraction layer which is the only place that should talk to back-end storage. MVC should be DMVC.
Keep in mind, there are many variations on MVC and no real "right way" to do things. Ultimately, how you design your classes comes down to personal preference. However, since you asked for design advice, here are my two cents:
Business logic belongs in the controller. Keep it out of the model and view.
Out of the many variations on the MVC pattern, the passive view style seems to be the easiest to test. In the passive view, your classes are designed as follows:
Your controller is "smart: it makes changes to the database, updates the model, and syncronizes the view with the model. Apart from a reference to the model and view, the controller should hold as little stateful information as possible.
The model is "stupid", meaning it only holds the state of the view and no additional business logic. Models should not hold a reference to either the view or controller.
The view is "stupid", meaning it only copies information from the model to the UI, and it invokes event handlers which are handled by the controller. The view should contain no additional business logic. Views should not hold a reference to the controller or model.
If you're an MVC purist, then it would not make sense for the model to update itself or the database since those responsibilities belong to the controller, so it would not be appropriate to create an addView method to your Video class.