I have a dialog box developed in mfc for a Windows CE device and want it to occupy the entire screen. I used the following code to center my dialog box on the lcd screen of the device:
CWnd* pWnd = GetDesktopWindow();
CenterWindow(pWnd);
However, I still get a tiny sliver of space on the left side of the dialog box, resizing the dialog merely makes it overflow on the right side of the LCD while the tiny space on the left remains (I can see the blue of the win CE desktop behind.)
Are there any suggestions to solve this problem? I checked the margin settings for this dialog box in my .rc files and leftmargin and topmargin are both set to 0.
I was wondering if I could get the coordinates of the center of the screen and then place my window one or two points to the left to deal with the current offset. A messy approach I know!
How to create "full screen applications". I've used similar code for PocketPC and WM 6.x devices.
http://support.microsoft.com/kb/266244
Related
I am using Amazon Fire 10 HD tablets to teach MIT App inventor. When I start typing in a text box keyboard pops up as expected. But instead of covering the bottom part of the screen it pushes the application (keeping the ratio) to top and shrinks it to fit the height left from the keyboard.
Normally you would expect the on screen keyboard to be floating on the application but this is not the same
use Sizing = Responsive instead of Fixed in your Screen settings
For a small demonstration application, I want the option to delete file (from the files explorer on windows) by simple dragging it all the way to left/right side of the screen (the all desktop, not the application)
Is there a way to do it?
Thanks.
For demonstration purposes you could create a borderless always on top window that fills the entire screen and cut out a hole in the middle of it with a window region so you are left with just a 1 or 2 pixel wide strip on each side and set the opacity to 1 so it is basically invisible. You could then handle drops on the window.
On Windows 8 you might run into issues because it already uses the edges.
I don't believe this feature is useful enough to actually implement as a real product though.
first off, I'm very new to using API's so please bear with me I'm on a steep learning curve !
I'm creating an application using Silverfrost Fortran FTN95.
I've been trying to initiate the opening of an initial Window within the program which uses the whole screen
useable area (the so-called WORKAREA in API parlance) but am having a problem.
Having used GET_WINDOW_LOCATION# API function within my Fortran code to obtain the dimensions and origin of the max possible area for
the window (without taskbar), I've then defined the 'origin' of the window to be at -n,-n where the border is n pixels thick and I've
increased the window dimensions by (2xn) in each direction so that the other 2 borders will be off-screen at top or under the taskbar at the bottom edge).
Anyway, I'm having difficulty obtaining exactly the same as produced via clicking the 'MAXimise button' on a window.
While the window produced itself seems to occupy the whole area available, when it appears the CAption appears right on the upper edge of the
CAption ba(i.e. not centre justified vertically).
Also, the MINimise, MAXimise and CLOSE buttons in top rh corner of window do not fill the whole depth of the CAption bar (they're about half the depth and indeed appear to be cut-off).
If I subsequently click the window 'MAXimise button' after initial window creation then the CAption and buttons re-align themselves correctly.
This is all illustrated in this image here:-
http://s1164.photobucket.com/user/john_pbucket/media/SilverfrostForumsImageFiles/MAXWIN-Summary_zpscajfx3vx.png.html
Note - I first created the full window with borders within the available screen area (this is the first example shown) where the window Border (8pix wide) is visible
The subsequent attempt to create the window as per the MAXimise button places the window at origin (-8,-8) and I increase the window dimensions by 16 (2xborder width) in each direction in order to get the borders off-screen, but thy're still there.
So, What series of Windows API commands should I be using exactly to get the window to open in a correctly maximised state, and are there any 'subtleties' of alignment and/or spacings I should be aware of which may be causing this problem?
I guess the question boils down to 'what sequence of API commands does the window MAXIMISE button execute ?' but I can't find an answer anywhere.
Maybe there are also some subtleties I need to know about with regard to any windows dimensions parameters which could be creating the anomaly ?
Any help/guidance would be appreciated. Thanks
My application is a Windows Forms one.
I tried using the windows wallpaper, but this depends on the "Fill", "Stretch", "Fit" or "Tile" settings.
I just need the image as it is on the desktop, but including the part "under" the taskbar, because this part is visible in case of transparent taskbar.
Why I need this?
Because I have a tray application which slides from under the taskbar when opening. And I need to set a mask there, so it can't be seen sliding, until it reaches the top of the taskbar. Again, this is only a problem when the taskbar is transparent.
I am not sure if I understood your question correctly. But to me, it seems that you need the image that has created wallpaper. If it seems easier, take a look at registry entries at following location:
HKEY_CURRENT_USER\Control Panel\Desktop
This will give you the path, size, tile/no tile etc. information for the wallpaper.
There is a Win32 function called PaintDesktop you could try but unless I'm misunderstanding things you should be able to just adjust the height of your window so it is never really behind the taskbar...
Why I need this? Because I have a tray application which slides from under the taskbar when opening. And I need to set a mask there, so it can't be seen sliding, until it reaches the top of the taskbar. Again, this is only a problem when the taskbar is transparent.
The problem here is that you're starting the slide up from the bottom of the entire screen, rather than starting from the bottom of the screen's working area (i.e., the top of the taskbar). That's why you're seeing the pop-up window slide up behind a transparent taskbar.
Luckily, the solution is much simpler than obtaining the desktop background and/or doing any type of masking. It's also much faster, and it's always good that your eye candy isn't unnecessarily taxing the user's computer.
All you need to do is determine the coordinates of the screen's working area, which is defined by Windows as the area that can be used by applications, not including the taskbar and other side bars. You can obtain this information easily in WinForms by querying the Screen.PrimaryScreen.WorkingArea property. This will return a Rectangle that corresponds to the primary screen's working area. Since you know that the taskbar is always displayed on the primary screen, this is exactly what you want.
Once you have the coordinates of the primary screen's working area, start your pop-up window's slide from the bottom of that.*
This is a good lesson of why you should always include an explanation of why you want to accomplish something. There's often an even better way that you haven't thought of.
*Of course, I'm ignoring the fact that a user might not have their taskbar positioned at the bottom of the screen. You can put it on either side or even on top. It sounds to me like you haven't considered this in your question, either. If this is an app that you're writing only for yourself or for a controlled environment where you can be sure that no one has their taskbar in non-default positions, that might be OK. But if you're writing software to distribute to a wider audience, you will need to take this into account. The rcWork coordinates will be correct, regardless of where the taskbar is positioned, of course, but you will need to know whether to start the pop-up window's slide from the bottom, the left side, the right side, or the top.
My application draws all its own window borders and decorations. It works fine with Windows taskbars that are set to auto-hide, except when my application window is maximized. The taskbar won't "roll up". It will behave normally if I have the application not maximized, even when sized all the way to the bottom of the screen. It even works normally if I just resize the window to take up the entire display (as though it was maximized).
I found the problem. My application was handling the WM_GETMINMAXINFO message, and was overriding the values in the parameter MINMAXINFO record. The values that were in the record were inflated by 7 (border width) the screen pixel resolution. That makes sense in that when maximized, it pushes the borders of the window beyond the visible part of the screen. It also set the ptMaxPosition (point that the window origin is set to when maximized) to -7, -7. My application was setting that to 0,0, and the max height and width to exactly the screen resolution size (not inflated). Not sure why this was done; it was written by a predecessor. If I comment out that code and don't modify the MINMAXINFO structure, the Auto-hide works.
As to why, I'm not entirely sure. It's possible that the detection for popping up an "autohidden" taskbar is hooked into the mechanism for handling WM_MOUSEMOVE messages, and not for WM_NCMOUSEMOVE. With my application causing the maximize to park my border right on the bottom of the screen, I would have been generating WM_NCMOUSEMOVE events; with the MINMAXINFO left alone, I would have been generating WM_MOUSEMOVE.
This is dependant on whether 'Keep the taskbar on top of other windows' is checked on the taskbar properties. If it's checked then the taskbar will appear.
But don't be tempted to programmatically alter this setting on an end users machine just to suit your needs, it's considered rude and bad practice. Your app should fit whatever environment it gets deployed to.