Could someone help me parse this string with regex? - ruby

I'm not very good with regex, but here's what I got (the string to parse and the regex are on this page) http://rubular.com/r/iIIYDHkwVF
It just needs to match that exact test string

The regular expression is
^"AddonInfo"$(\n\s*)+^\{\s*
It's looking for
^"AddonInfo"$ — a line containing only "AddonInfo"
(\n\s*)+ — followed by at least one newline and possibly many blank or empty lines
^\{\s* — and finally a line beginning with { followed by optional whitespace
To break down a regular expression into its component pieces, have a look at an answer that explains beginning with the basics.
To match the entire string, use
^"AddonInfo"$(\n\s*)+^\{(\s*".+?"\s+".+?"\s*\n)+^\}
So after the open curly, you're looking for one or more lines such that each contains a pair of quote-delimited simple strings (no escaping).

This one works:
^"AddonInfo"[^{]*{[^}]*}
Explanation:
^"AddonInfo" matches "AddonInfo" in the beginning of a line
[^{]* matches all the following non-{ characters
{ matches the following {
[^}]* matches all the following non-} characters
} matches the following }

^"AddonInfo"(\s*)+^\{\s*(?:"([^"]+)"\s+"([^"]*)"\s+)+\}
You will get $1 to point into first key, $2 first value, $3 second key, $4, second value, and so on.
Notice that key is to be non-empty ("([^"]+"), but value may be empty (uses * instead of +).

Related

Do not match a word and then match a character thereafter

I am trying to get a regular expression that matches a string that does not contain a certain word and contains a certain character after the word that was not matched. For instance, it should not match any word starting with 'break' followed by the ';' character, but should match any word that does not start with 'break' but ends with ';'. So in the following example:
break; // does not match
code // does not match
code; // matches
I've tried the following code, but it always matches:
/?!break;/
You can use the regular expression below:
/^(?!(break)).+;$/gi
It catches everything which ends with ";" and avoid words which starts with "break"
I tested with these group of words:
break;
breakline
breakline;
line
line;
code
code;
something
something;
The bold words demonstrates which ones was selected by the regex.
Hope it helps

Ruby regex | Match enclosing brackets

I'm trying to create a regex pattern to match particular sets of text in my string.
Let's assume this is the string ^foo{bar}#Something_Else
I would like to match ^foo{} skipping entirely the content of the brackets.
Until now i figured out how to get all everything with this regex here \^(\w)\{([^\}]+)} but i really don't know how to ignore the text inside the curly brackets.
Anyone has an idea? Thanks.
Update
This is the final solution:
puts script.gsub(/(\^\w+)\{([^}]+)(})/, '[BEFORE]\2[AFTER]')
Though I'd prefer this with fewer groups:
puts script.gsub(/\^\w+\{([^}]+)}/, '[BEFORE]\1[AFTER]')
Original answer
I need to replace the ^foo{} part with something else
Here is a way to do it with gsub:
s = "^foo{bar}#Something_Else"
puts s.gsub(/(.*)\^\w+\{([^}]+)}(.*)/, '\1SOMETHING ELSE\2\3')
See demo
The technique is the same: you capture the text you want to keep and just match text you want to delete, and use backreferences to restore the text you captured.
The regex matches:
(.*) - matches and captures into Group 2 as much text as possible from the start
\^\w+\{ - matches ^, 1 or more word characters, {
([^}]+) - matches and captures into Group 2 1 or more symbols other than }
} - matches the }
(.*) - and finally match and capture into Group 3 the rest of the string.
If you mean to match ^foo{} by a single match against a regex, it is impossible. A regex match only matches a substring of the original string. Since ^foo{} is not a substring of ^foo{bar}#Something_Else, you cannot match that with a single match.

Regex: Substring the second last value between two slashes of a url string

I have a string like this:
http://www.example.com/value/1234/different-value
How can I extract the 1234?
Note: There may be a slash at the end:
http://www.example.com/value/1234/different-value
http://www.example.com/value/1234/different-value/
/([^/]+)(?=/[^/]+/?$)
should work. You might need to format it differently according to the language you're using. For example, in Ruby, it's
if subject =~ /\/([^\/]+)(?=\/[^\/]+\/?\Z)/
match = $~[1]
else
match = ""
end
Use Slice for Positional Extraction
If you always want to extract the 4th element (including the scheme) from a URI, and are confident that your data is regular, you can use Array#slice as follows.
'http://www.example.com/value/1234/different-value'.split('/').slice 4
#=> "1234"
'http://www.example.com/value/1234/different-value/'.split('/').slice 4
#=> "1234"
This will work reliably whether there's a trailing slash or not, whether or not you have more than 4 elements after the split, and whether or not that fourth element is always strictly numeric. It works because it's based on the element's position within the path, rather than on the contents of the element. However, you will end up with nil if you attempt to parse a URI with fewer elements such as http://www.example.com/1234/.
Use Scan/Match for Pattern Extraction
Alternatively, if you know that the element you're looking for is always the only one composed entirely of digits, you can use String#match with look-arounds to extract just the numeric portion of the string.
'http://www.example.com/value/1234/different-value'.match %r{(?<=/)\d+(?=/)}
#=> #<MatchData "1234">
$&
#=> "1234"
The look-behind and look-ahead assertions are needed to anchor the expression to a path. Without them, you'll match things like w3.example.com too. This solution is a better approach if the position of the target element may change, and if you can guarantee that your element of interest will be the only one that matches the anchored regex.
If there will be more than one match (e.g. http://www.example.com/1234/5678/) then you might want to use String#scan instead to select the first or last match. This is one of those "know your data" things; if you have irregular data, then regular expressions aren't always the best choice.
Javascript:
var myregexp = /:\/\/.*?\/.*?\/(\d+)/;
var match = myregexp.exec(subject);
if (match != null) {
result = match[1];
}
Works with your examples... But I am sure it will fail in general...
Ruby edit:
if subject =~ /:\/\/.*?\/.*?\/(.+?)\//
match = $~[1]
It does work.
I think this is a little simpler than the accepted answer, because it doesn't use any positive lookahead (?=), but rather simply makes the last slash optional via the ? character:
^.+\/(.+)\/.+\/?$
In Ruby:
STDIN.read.split("\n").each do |nextline|
if nextline =~ /^.+\/(.+)\/.+\/?$/
printf("matched %s in %s\n", $~[1], nextline);
else
puts "no match"
end
end
Live Demo
Let's break down what's happening:
^: start of the line
.+\/: match anything (greedily) up to a slash
Since we're going to later match at least 1, at most 2 more slashes, this slash will be either the second last slash (as in http://www.example.com/value/1234/different-value) or the third last slash as in (http://www.example.com/value/1234/different-value/)
Up to this point we've matched http://www.example.com/value/ (due to greediness)
(.+)\/: Our capturing group for 1234 indicated by the parenthesis. It's anything followed by another slash.
Since the previous match matched up to the second or third last slash, this will match up to the last slash or second last slash, respectively
.+: match anything. This would be after our 1234, so we're assuming there are characters after 1234/ (different-value)
\/?: optionally match another slash (the slash after different-value)
$: match the end of the line
Note that in a url, you probably won't have spaces. I used the . character because it's easily distinguished, but perhaps you might use \S instead to match non-spaces.
Also, you might use \A instead of ^ to match start of string (instead of after line break) and \Z instead of $ to match end of string (instead of at line break)

ruby parametrized regular expression

I have a string like "{some|words|are|here}" or "{another|set|of|words}"
So in general the string consists of an opening curly bracket,words delimited by a pipe and a closing curly bracket.
What is the most efficient way to get the selected word of that string ?
I would like do something like this:
#my_string = "{this|is|a|test|case}"
#my_string.get_column(0) # => "this"
#my_string.get_column(2) # => "is"
#my_string.get_column(4) # => "case"
What should the method get_column contain ?
So this is the solution I like right now:
class String
def get_column(n)
self =~ /\A\{(?:\w*\|){#{n}}(\w*)(?:\|\w*)*\}\Z/ && $1
end
end
We use a regular expression to make sure that the string is of the correct format, while simultaneously grabbing the correct column.
Explanation of regex:
\A is the beginnning of the string and \Z is the end, so this regex matches the enitre string.
Since curly braces have a special meaning we escape them as \{ and \} to match the curly braces at the beginning and end of the string.
next, we want to skip the first n columns - we don't care about them.
A previous column is some number of letters followed by a vertical bar, so we use the standard \w to match a word-like character (includes numbers and underscore, but why not) and * to match any number of them. Vertical bar has a special meaning, so we have to escape it as \|. Since we want to group this, we enclose it all inside non-capturing parens (?:\w*\|) (the ?: makes it non-capturing).
Now we have n of the previous columns, so we tell the regex to match the column pattern n times using the count regex - just put a number in curly braces after a pattern. We use standard string substition, so we just put in {#{n}} to mean "match the previous pattern exactly n times.
the first non skipped column after that is the one we care about, so we put that in capturing parens: (\w*)
then we skip the rest of the columns, if any exist: (?:\|\w*)*.
Capturing the column puts it into $1, so we return that value if the regex matched. If not, we return nil, since this String has no nth column.
In general, if you wanted to have more than just words in your columns (like "{a phrase or two|don't forget about punctuation!|maybe some longer strings that have\na newline or two?}"), then just replace all the \w in the regex with [^|{}] so you can have each column contain anything except a curly-brace or a vertical bar.
Here's my previous solution
class String
def get_column(n)
raise "not a column string" unless self =~ /\A\{\w*(?:\|\w*)*\}\Z/
self[1 .. -2].split('|')[n]
end
end
We use a similar regex to make sure the String contains a set of columns or raise an error. Then we strip the curly braces from the front and back (using self[1 .. -2] to limit to the substring starting at the first character and ending at the next to last), split the columns using the pipe character (using .split('|') to create an array of columns), and then find the n'th column (using standard Array lookup with [n]).
I just figured as long as I was using the regex to verify the string, I might as well use it to capture the column.

How to remove the first 4 characters from a string if it matches a pattern in Ruby

I have the following string:
"h3. My Title Goes Here"
I basically want to remove the first four characters from the string so that I just get back:
"My Title Goes Here".
The thing is I am iterating over an array of strings and not all have the h3. part in front so I can't just ditch the first four characters blindly.
I checked the docs and the closest thing I could find was chomp, but that only works for the end of a string.
Right now I am doing this:
"h3. My Title Goes Here".reverse.chomp(" .3h").reverse
This gives me my desired output, but there has to be a better way. I don't want to reverse a string twice for no reason. Is there another method that will work?
To alter the original string, use sub!, e.g.:
my_strings = [ "h3. My Title Goes Here", "No h3. at the start of this line" ]
my_strings.each { |s| s.sub!(/^h3\. /, '') }
To not alter the original and only return the result, remove the exclamation point, i.e. use sub. In the general case you may have regular expressions that you can and want to match more than one instance of, in that case use gsub! and gsub—without the g only the first match is replaced (as you want here, and in any case the ^ can only match once to the start of the string).
You can use sub with a regular expression:
s = 'h3. foo'
s.sub!(/^h[0-9]+\. /, '')
puts s
Output:
foo
The regular expression should be understood as follows:
^ Match from the start of the string.
h A literal "h".
[0-9] A digit from 0-9.
+ One or more of the previous (i.e. one or more digits)
\. A literal period.
A space (yes, spaces are significant by default in regular expressions!)
You can modify the regular expression to suit your needs. See a regular expression tutorial or syntax guide, for example here.
A standard approach would be to use regular expressions:
"h3. My Title Goes Here".gsub /^h3\. /, '' #=> "My Title Goes Here"
gsub means globally substitute and it replaces a pattern by a string, in this case an empty string.
The regular expression is enclosed in / and constitutes of:
^ means beginning of the string
h3 is matched literally, so it means h3
\. - a dot normally means any character so we escape it with a backslash
is matched literally

Resources