Is there a way for a batch file (in this case, running on Windows XP) to determine whether it was launched from a command line (i.e. inside a console window) or launched via the shell (e.g. by double-clicking)?
I have a script which I'd like to have pause at certain points when run via the shell, but not when run at a command line. I've seen a similar question on SO, but am unable to use the same solution for two reasons: first, whether or not it pauses needs to be dependent on multiple factors, only one of which is whether it was double-clicked. Second, I'll be distributing this script to others on my team and I can't realistically ask all of them to make registry changes which will affect all scripts.
Is this possible?
Found one :-) – After desperately thinking of what cmd might do when run interactively but not when launching a batch file directly ... I finally found one.
The pseudo-variable %cmdcmdline% contains the command line that was used to launch cmd. In case cmd was started normally this contains something akin to the following:
"C:\Windows\System32\cmd.exe"
However, when launching a batch file it looks like this:
cmd /c ""C:\Users\Me\test.cmd" "
Small demo:
#echo off
for %%x in (%cmdcmdline%) do if /i "%%~x"=="/c" set DOUBLECLICKED=1
if defined DOUBLECLICKED pause
This way of checking might not be the most robust, though, but /c should only be present as an argument if a batch file was launched directly.
Tested here on Windows 7 x64. It may or may not work, break, do something weird, eat children (might be a good thing) or bite you in the nose.
A consolidated answer, derived from much of the information found on this page (and some other stack overflow pages with similar questions). This one does not rely on detecting /c, but actually checks for the name of the script in the command line. As a result this solution will not pause if you double-clicked on another batch and then called this one; you had to double-click on this particular batch file.
:pauseIfDoubleClicked
setlocal enabledelayedexpansion
set testl=%cmdcmdline:"=%
set testr=!testl:%~nx0=!
if not "%testl%" == "%testr%" pause
The variable "testl" gets the full line of the cmd processor call, stripping out all of the pesky double quotes.
The variable "testr" takes "testl" and further strips outs the name of the current batch file name if present (which it will be if the batch file was invoked with a double-click).
The if statement sees if "testl" and "testr" are different. If yes, batch was double-clicked, so pause; if no, batch was typed in on command line (or called from another batch file), go on.
Edit: The same can be done in a single line:
echo %cmdcmdline% | findstr /i /c:"%~nx0" && set standalone=1
In plain English, this
pipes the value of %cmdcmdline% to findstr, which then searches for the current script name
%0 contains the current script name, of course only if shift has not been called beforehand
%~nx0 extracts file name and extension from %0
>NUL 2>&1 mutes findstr by redirecting any output to NUL
findstr sets a non-zero errorlevel if it can't find the substring in question
&& only executes if the preceding command returned without error
as a consequence, standalone will not be defined if the script was started from the command line
Later in the script we can do:
if defined standalone pause
One approach might be to create an autoexec.nt file in the root of c:\ that looks something like:
#set nested=%nested%Z
In your batch file, check if %nested% is "Z" - if it is "Z" then you've been double-clicked, so pause. If it's not "Z" - its going to be "ZZ" or "ZZZ" etc as CMD inherits the environment block of the parent process.
-Oisin
A little more information...
I start with a batch-file (test.cmd) that contains:
#echo %cmdcmdline%
If I double-click the "test.cmd" batch-file from within Windows Explorer, the display of echo %cmdcmdline% is:
cmd /c ""D:\Path\test.cmd" "
When executing the "test.cmd" batch-file from within a Command Prompt window, the display of
echo %cmdcmdline% depends on how the command window was started...
If I start "cmd.exe" by clicking the "Start-Orb" and "Command Prompt" or if I click "Start-Orb" and execute "cmd.exe" from the search/run box. Then I execute the "test.cmd" batch-file, the display of echo %cmdcmdline% is:
"C:\Windows\system32\cmd.exe"
Also, for me, if I click "Command Prompt" from the desktop shortcut, then execute the "test.cmd" batch-file, the display of echo %cmdcmdline% is also:
"C:\Windows\system32\cmd.exe"
But, if I "Right-Click" inside a Windows Explorer window and select "Open Command Prompt Here", then execute the "test.cmd" batch-file, the display of echo %cmdcmdline% is:
"C:\Windows\System32\cmd.exe" /k ver
So, just be careful, if you start "cmd.exe" from a shortcut that contains a "/c" in the "Target" field (unlikely), then the test in the previous example will fail to test this case properly.
Related
I have a file say my-file.dat which has multiple lines. I want to set an env variable say MYVAR that will contain the content of my-file.dat.
That is, in windows command prompt, the output of type my-file.dat be same as the output of echo %MYVAR% and with new-line preserved.
In RHEL/MAC, it is typically done like this export MYVAR=$(cat my-file.dat), but how do I do the similar in windows command prompt (not really interested in powershell, but feel free to share examples it might be my backup option)
Following the answer of this Stackoverflow question Multiline text file, how to put into an environment variable I could get a variable to hold the content of my-file.dat. But this variable's scope seems to be the batch file. Even though I run the batch file from the command prompt, I don't see the batch-file's variable is available in the command prompt.
I tried set /P MYVAR=<my-file.dat , but this sets only the first line whereas I want all lines when I echo MYVAR
Pls help.
The technique you use requires delayed expansion, which is not enabled by default. So the code issues setlocal enableDelayedExpansion. But that localizes environment changes. When the script ends there is an implicit endlocal, and the environment is restored to what existed before the setlocal.
The simplest solution is to run the script in a session where delayed expansion is already enabled so that you can remove setlocal enableDelayedExpansion. You can do this simply by running
cmd /v:on from your command line before executing your script.
There is another simple, but ugly option. The implicit endlocal does not occur if your script has a fatal syntax error (I consider this to be a bug in cmd.exe). So you can put the following at the end of your script:
:: Your current script goes here.
:: I'm assuming your script falls through to the end and does not use EXIT /B
call :fatalErr 2>nul
:fatalErr
if
But I discourage you from using this technique if you might be executing your script multiple times - your dead environments will begin to pile up.
Also - please remember that variables are limited to ~8191 characters - your script will fail if the file you are trying to capture exceeds the limit. This is a hard limit of cmd.exe
Update
You could put the cmd /v:on command within your script if you add the /K option. The IF statement tests if delayed expansion is enabled or not. If not, then it reruns the script via cmd.exe with the /K option and /V:ON.
#echo off
if "!!" neq "" cmd /v:on /k "%~f0"
:: rest of your script goes here.
I am trying to convert a bash script to batch, but I am having a trouble for this one issue. The script runs a java server in the background, waits for 5 seconds, then exit with exitcode. But in batch, I am unable...
runserver.sh
java -jar java_server.jar &
pid=$!
sleep 5
kill -0 $pid
cmdStatus=$?
if [ $cmdStatus -ne 0 ]
then
exit 1
fi
exit 0
runserver.bat
#echo off
set EXITCODE=0
start /b java -jar java_server.jar
timeout /t 5
for /f "tokens=1 delims= " %%i in ('jps -m ^| findstr java_server') do set PID=%%i
IF "%PID" == "" (
set EXITCODE=1
)
EXIT EXITCODE
but if I run the above batchscript, I am never able to disown the java process and it never exists
The first mistake in batch file code is missing % in line IF "%PID" == "" to really compare the value of the environment variable PID enclosed in double quotes with the string "". So correct would be IF "%PID%" == "". For more details on string comparisons see Symbol equivalent to NEQ, LSS, GTR, etc. in Windows batch files.
The second mistake is not using two times % on last command line EXIT EXITCODE around the environment variable EXITCODE to reference its value which would be correct written as EXIT %EXITCODE%.
But the batch file should be better written as follows:
#echo off
cd /D "%~dp0"
start "" /B javaw.exe -jar "%~dp0java_server.jar"
%SystemRoot%\System32\timeout.exe /T 5 /NOBREAK >nul
jps -m 2>nul | %SystemRoot%\System32\findstr.exe /L "java_server" >nul
The batch file first makes the directory of the batch file the current directory because of java_server.jar is most likely in directory of the batch file. %~dp0 expands to drive and path of argument 0 which is the batch file. The file path referenced with %~dp0 always ends with a backslash which is the directory separator on Windows which should be taken into account on concatenating this string with a file or folder name. The command CD fails only if the batch file is stored on a network resource accessed with a UNC path because of Windows prevents by default that a directory referenced with a UNC path instead of a drive letter becomes the current directory for downwards compatibility reasons because of many console applications work not correct with current directory not being on a drive with a drive letter.
The command START interprets first double quoted string as title for the console window opened on running a Windows console application in a separate command process. In this case no console window is opened because of using option /B although java.exe is a Windows console application. For that reason explicitly specifying an empty string with "" as window title like on starting a Windows GUI application is advisable to avoid that any other double quoted argument string is interpreted as optional window title.
The option /B is interpreted as background. Most people think that the started application is detached from current command process. This is true for Windows GUI applications, but not for console applications like java.exe. The handle STDIN of current command process is bind with STDIN of started console application. Also the output to the handles STDOUT and STDERR of started application are redirected to console window of the running command process which nevertheless continues immediately with execution of batch script. The option /B means just running the console application parallel to current command process without opening a new console window, but not in running the application completely detached from running command process.
The solution is quite simple in this case because there is also javaw.exe, the Windows version of Java designed for running a Java application completely in background detached from the process starting it.
A batch file for general usage works best on specifying all files with full qualified file name which means with full path, file name and file extension. Java executable can be installed everywhere and so the folder path for this executable can't be specified in the batch file. Windows command processor has to find the executable javaw in current directory or in any folder in list of folders of local environment variable PATH. But it is at least possible to specify the executable javaw with its file extension .exe as this file extension is well known.
The JAR file java_server.jar is specified with full path on assuming that this file is stored in same directory as the batch file. The batch file directory should be already the current directory and so %~dp0 would not be needed at all, but it does not matter to specify the file for safety with full path.
Next the standard Windows console application TIMEOUT is called with full qualified file name with options to wait 5 seconds unbreakable (requires Windows 7 or newer) and redirecting its output to device NUL.
I don't know anything about the file jps and have not even installed Java. For that reason I assume jps is an executable or script of which file extension listed in local environment variable PATHEXT and stored in directory of the batch file or any other directory of which path is listed in local environment variable PATH. It would be of course better to specify this file with file extension and if possible also with full path.
The standard output of jps is redirected to standard input of Windows standard console application FINDSTR and the error output to device NUL to suppress it.
FINDSTR runs a case-sensitive, literal string search for java_server on standard output of jps. The output of FINDSTR is of no interest and therefore redirected also to device NUL to suppress it.
FINDSTR exits with 0 on searched string really found and with 1 on nothing found. The batch file should exit with 1 on not successfully starting Java server and with 0 on Java server running. This matches exactly with exit code of FINDSTR and so nothing else must be done.
cmd.exe exits the execution of a batch file always with last exit code set by an application or command during batch file execution. This can be verified on commenting out second command line with rem and save it, running this batch file from within a command prompt window and running next in command prompt window if errorlevel 1 echo Java server not running! resulting in expected output Java server not running!. Then rem needs to be removed from second command line of batch file before saving the batch file which is run once again from within the command prompt window. After second batch file execution finished, running once again if errorlevel 1 echo Java server not running! results in no output while running if errorlevel 0 echo Java server is running. results in output Java server is running. as expected.
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
call /? ... explains %~dp0
cd /?
echo /?
findstr /?
if /?
start /?
See also:
Microsoft article about Using command redirection operators
What are the ERRORLEVEL values set by internal cmd.exe commands?
Which cmd.exe internal commands clear the ERRORLEVEL to 0 upon success?
I am trying to start the default application for a file, wait for it to complete, and then continue with my batch file. The problem is that start, when used below simply creates another command prompt window with the example.doc in the title bar. I can use call instead of start, but then call does not wait for the program to finish before going to the next line. It appears that start needs to have an executable name and will not work with the default application system in windows.
Any ideas how I can make this happen without having to hardcode the windows application in the batch file as well?
set filename=example.doc
start /wait %filename%
copy %filename% %filename%.bak
How do I start the default application for a file, wait for completion, then continue?
It appears that start needs to have an executable name and will not work with the default application system in windows.
start, when used below simply creates another command prompt window with the example.doc in the title bar
start /wait %filename%
The above command won't work because %filename% is used as the window title instead of a command to run.
Always include a TITLE this can be a simple string like "My Script" or just a pair of empty quotes ""
According to the Microsoft documentation, the title is optional, but depending on the other options chosen you can have problems if it is omitted.
Source start
Try the following command instead:
start "" /wait %filename%
Alternative solution using the default open command
Any ideas how I can make this happen without having to hardcode the
windows application in the batch file as well?
One way is to use assoc and ftype to get the default open command used for the file then execute that command.
The following batch file does that for you (so no hard coding of windows applications is needed).
Open.cmd:
#echo off
setlocal enabledelayedexpansion
set _file=example.doc
rem get the extension
for %%a in (%_file%) do (
set _ext=%%~xa
)
rem get the filetype associated with the extension
for /f "usebackq tokens=2 delims==" %%b in (`assoc %_ext%`) do (
set _assoc=%%b
)
rem get the open command used for files of type filetype
for /f "usebackq tokens=2 delims==" %%c in (`ftype %_assoc%`) do (
set _command=%%c
rem replace %1 in the open command with the filename
set _command=!_command:%%1=%_file%!
)
rem run the command and wait for it to finish.
start "" /wait %_command%
copy %_file% %_file%.bak 1>nul
endlocal
Further Reading
An A-Z Index of the Windows CMD command line - An excellent reference for all things Windows cmd line related.
assoc - Display or change the association between a file extension and a fileType
enabledelayedexpansion - Delayed Expansion will cause variables to be expanded at execution time rather than at parse time.
for - Conditionally perform a command several times.
for /f - Loop command against the results of another command.
ftype - Display or change the link between a FileType and an executable program.
start - Start a program, command or batch script (opens in a new window).
variable edit/replace - Edit and replace the characters assigned to a string variable.
Simply use the filename directly as command, unless that filename is a batch file, in which case use call.
In a batch file invocation of a GUI subsystem executable is blocking, unlike for an interactive command.
Use the start command when you don't want blocking execution.
There is a subtle point about “default application”, namely that a file type can have a registered default application for the graphical shell, e.g. its “Open with…”, without having an assoc/ftype association, or different from that association.
I'm not entirely sure of which registry entries are used for this. I've always had to look it up and research it each time. As I recall it's not well-documented.
But hopefully you're OK with just the assoc/ftype scheme.
A further subtle point about “default application”: on the laptop I'm writing this on the ftype association for text files is to open them in Notepad:
[H:\forums\so]
> assoc .txt
.txt=txtfile
[H:\forums\so]
> ftype txtfile
txtfile=%SystemRoot%\system32\NOTEPAD.EXE %1
[H:\forums\so]
> _
And this is what the graphical shell (Windows Explorer) will do.
But cmd.exe looks inside files, and if it finds an executable signature then it tries to run the text file as an executable, even in Windows 10:
[H:\forums\so]
> echo MZ bah! >oops.txt
[H:\forums\so]
> oops.txt
This version of H:\forums\so\oops.txt is not compatible with the version of Windows you're running. Check your computer's system information and then contact the software publisher.
[H:\forums\so]
> _
After Windows XP, I always use the trick below to start batch files minimized with Windows Task Manager.
From http://www.pcreview.co.uk/forums/running-bat-files-minimized-scheduler-t2125918.html:
"prequisite: all your batch files have an exit-command to finish the actions off. If you do not exit, you will end with a command prompt blinking.
This is what I keep using:
%comspec% /c start /min "C:\Scripts\Destination_inbound_ftp5.bat"
When you save this in the properties, you will get a follow-up dialogue asking you if you meant all this to be parameters or not. Answer NO and the task will be saved as you would expect.
I also read the Stack Overflow question “start %comspec% /c script.cmd” vs “start cmd /C second.cmd script.cmd”, which made me replace the "%comspec%" statement with "C:\Windows\system32\cmd.exe", but that did not change anything either.
The problem is that now, instead of a minimized running bat file, I end up with just a command prompt, minimized but without any of the batch commands executed. The task scheduler status remains "running" :(
How do I get this done on Windows 8 (64-bit)? Preferrable with old-school batch commands instead of PowerShell (or worse ;p)
The start command needs the leading "" quotes to disable the title feature. Try scheduling this:
%comspec% /c start "" /min "C:\Scripts\Destination_inbound_ftp5.bat" ^& exit
Assuming Windows 8 is the same as Windows 7, an "exit" is only going to exit the batch file (which it is going to do anyway).
You need to add the exit code like this:
Under "Program/Script":
CMD (or command.exe, or %comspec%)
Under "Arguments:
/c start "Title" /min "C:\Scripts\Destination_inbound_ftp5.bat" ^& exit
I didn't like seeing the command window pop up and then disappear so here is another solution from https://ss64.com/vb/run.html ...
First create invisible.vbs with this single line of text:
CreateObject("Wscript.Shell").Run """" & WScript.Arguments(0) & """", 0, False
Next and finally, launch your cmd or batch file via:
%SystemRoot%\system32\wscript.exe "invisible.vbs" "myscript.cmd" //nologo
Ta da! Scripting of this sort has been built into Windows for a long time. If you're curious, do a web search for "WSH" (windows scripting host). You can even write such scripts in dialect of JavaScript called JScript.
Another possibility: a small freeware program named CMDH, that simply runs the requested orders in background.
For example:
cmdh MyScript.cmd
No need to add "exit" to the script.
Tested working in Windows XP SP3, and there is no reason it should fail on Windows 8.
Here's a solution from https://ss64.com/vb/run.html that will run a batch file in a minimized window. Unlike the other solutions that use the start command with /min, this one will not flash a new window onto your screen or interrupt full-screen activities. It does, however, steal focus. I don't know how to avoid that.
First create a file named run_minimized.vbs with this single line of text:
CreateObject("Wscript.Shell").Run """" & WScript.Arguments(0) & """", 2, False
Next, create your Task Scheduler task with an action to start the program wscript.exe with these arguments:
"c:\path\run_minimized.vbs" "c:\path\my script.bat"
Change the paths as necessary to specify the locations of the two files.
There is no simple way to pass arguments from Task Scheduler to the batch file while also preserving spaces and quotation marks, because wscript strips quotation marks from its arguments. The simplest way to handle arguments with spaces would be to put the entire batch file command into the vbs:
CreateObject("Wscript.Shell").Run """c:\path\my script.bat"" ""arg 1"" arg2", 2, False
Note the use of quotation marks. There's one pair of quotation marks " enclosing the entire command string, and a pair of adjacent quote characters "" every place you'd use a normal quotation mark in a command line.
Maybe it's not the same as you mean but if I simply run a .bat file with the scheduler and tick this "Hidden" box on the General tab of the task properties it starts minified.
As already mentioned in foxidrive's answer, the issue is caused by the missing title parameter, which is taken from the first quoted argument string on the command line of the start command, which is the quoted batch file path in your command line. Since there is nothing left to be taken as the command/program to be started, the default cmd.exe is started.
Providing a dummy title (which may even be empty) solves that issue:
%ComSpec% /C start "" /MIN "C:\Scripts\Destination_inbound_ftp5.bat"
However, as mentioned in the help message of start (type start /? into a command prompt window), when the provided command/program is a batch file, the command processor cmd.exe is run with the /K switch, which keeps the command prompt window open:
command/program
If it is an internal cmd command or a batch file then
the command processor is run with the /K switch to cmd.exe.
This means that the window will remain after the command
has been run.
If it is not an internal cmd command or batch file then
it is a program and will run as either a windowed application
or a console application.
To prevent that, let us explicitly specify the command processor with the /C switch:
%ComSpec% /C start "" /MIN %ComSpec% /C "C:\Scripts\Destination_inbound_ftp5.bat"
So there is no additional exit command necessary.
I have this bat file and I want to minimize the cmd window when I run it:
#echo off
cd /d C:\leads\ssh
call C:\Ruby192\bin\setrbvars.bat
ruby C:\leads\ssh\put_leads.rb
I want the command window minimized immediately. Any ideas on how to do this?
There is a quite interesting way to execute script minimized by making him restart itself minimised. Here is the code to put in the beginning of your script:
if not DEFINED IS_MINIMIZED set IS_MINIMIZED=1 && start "" /min "%~dpnx0" %* && exit
... script logic here ...
exit
How it works
When the script is being executed IS_MINIMIZED is not defined (if not DEFINED IS_MINIMIZED) so:
IS_MINIMIZED is set to 1: set IS_MINIMIZED=1.
Script starts a copy of itself using start command && start "" /min "%~dpnx0" %* where:
"" - empty title for the window.
/min - switch to run minimized.
"%~dpnx0" - full path to your script.
%* - passing through all your script's parameters.
Then initial script finishes its work: && exit.
For the started copy of the script variable IS_MINIMIZED is set by the original script so it just skips the execution of the first line and goes directly to the script logic.
Remarks
You have to reserve some variable name to use it as a flag.
The script should be ended with exit, otherwise the cmd window wouldn't be closed after the script execution.
If your script doesn't accept arguments you could use argument as a flag instead of variable:
if "%1" == "" start "" /min "%~dpnx0" MY_FLAG && exit
or shorter
if "%1" == "" start "" /min "%~f0" MY_FLAG && exit
Use the start command, with the /min switch to run minimized. For example:
start /min C:\Ruby192\bin\setrbvars.bat
Since you've specified a batch file as the argument, the command processor is run, passing the /k switch. This means that the window will remain on screen after the command has finished. You can alter that behavior by explicitly running cmd.exe yourself and passing the appropriate switches if necessary.
Alternatively, you can create a shortcut to the batch file (are PIF files still around), and then alter its properties so that it starts minimized.
The only way I know is by creating a Windows shortcut to the batch file and then changing its properties to run minimized by default.
Using PowerShell you can minimize from the same file without opening a new instance.
powershell -window minimized -command ""
Also -window hidden and -window normal is available to hide completely or restore.
source: https://stackoverflow.com/a/45061676/1178975
If you want to start the batch for Win-Run / autostart, I found I nice solution here https://www.computerhope.com/issues/ch000932.htm & https://superuser.com/questions/364799/how-to-run-the-command-prompt-minimized
cmd.exe /c start /min myfile.bat ^& exit
the cmd.exe is needed as start is no windows command that can be executed outside a batch
/c = exit after the start is finished
the ^& exit part ensures that the window closes even if the batch does not end with exit
However, the initial cmd is still not minimized.
One way to 'minimise' the cmd window is to reduce the size of the console using something like...
echo DO NOT CLOSE THIS WINDOW
MODE CON COLS=30 LINES=2
You can reduce the COLS to about 18 and the LINES to 1 if you wish.
The advantage is that it works under WinPE, 32-bit or 64-bit, and does not require any 3rd party utility.
If you type this text in your bat file:
start /min blah.exe
It will immediately minimize as soon as it opens the program. You will only see a brief flash of it and it will disappear.
You could try running a script as follows
var WindowStyle_Hidden = 0
var objShell = WScript.CreateObject("WScript.Shell")
var result = objShell.Run("cmd.exe /c setrbvars.bat", WindowStyle_Hidden)
save the file as filename.js
Yet another free 3rd party tool that is capable of minimizing the console window at any time (not only when starting the script) is Tcl with the TWAPI extension:
echo package require twapi;twapi::minimize_window [twapi::get_console_window] | tclkitsh -
here tclkitsh.exe is in the PATH and is one of the tclkit-cli-*-twapi-*.exe files downloadable from sourceforge.net/projects/twapi/files/Tcl binaries/Tclkits with TWAPI/. I prefer it to the much lighter min.exe mentioned in Bernard Chen's answer because I use TWAPI for countless other purposes already.
You can minimize the command prompt on during the run but you'll need two additional scripts: windowMode and getCmdPid.bat:
#echo off
call getCmdPid
call windowMode -pid %errorlevel% -mode minimized
cd /d C:\leads\ssh
call C:\Ruby192\bin\setrbvars.bat
ruby C:\leads\ssh\put_leads.rb
One option is to find one of the various utilities that can change the window state of the currently running console window and make a call to it from within the batch script.
You can run it as the first thing in your batch script. Here are two such tools:
min.exe
http://www.paulsadowski.com/wsh/cmdprogs.htm
cmdow
http://www.commandline.co.uk/cmdow/index.html
Another option that works fine for me is to use ConEmu, see http://conemu.github.io/en/ConEmuArgs.html
"C:\Program Files\ConEmu\ConEmu64.exe" -min -run myfile.bat
try these
CONSOLESTATE /Min
or:
SETCONSOLE /minimize
or:
TITLE MinimizeMePlease
FOR /F %%A IN ('CMDOW ˆ| FIND "MinimizeMePlease"') DO CMDOW %%A /MIN
http://conemu.github.io/en/ConEmuArgs.html download flagged by Virus Total.
May have Malware.