I am trying to migrate one of projects earlier in VS2008 to VS2010. On building I get the following error
C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets(317,7): error MSB4094: "hdxBinding.idl;hdxBlinking.idl;HDXCommandObject.idl;hdxds.idl;HSCProcessStatus.idl;HSCSelectableWindow.idl" is an invalid value for the "Source" parameter of the "MIDL" task. Multiple items cannot be passed into a parameter of type "Microsoft.Build.Framework.ITaskItem".
On clicking this error, it takes me to the line Source ="#(Midl)" inside C:\Program Files\MSBuild\Microsoft.Cpp\v4.0\Microsoft.CppCommon.targets file
A Code Snippet in Microsoft.CppCommon.targets file:
<ItemGroup>
<Midl Condition="'#(Midl)' != ''">
<MinimalRebuildFromTracking Condition="'$(BuildType)' != 'Build' or '$(ForceRebuild)' == 'true'">false</MinimalRebuildFromTracking>
</Midl>
</ItemGroup>
<PropertyGroup>
<MidlToolArchitecture Condition="'$(MidlToolArchitecture)' == ''">$(DefaultToolArchitecture)</MidlToolArchitecture>
</PropertyGroup>
<MIDL
Condition ="'%(Midl.ExcludedFromBuild)'!='true'"
Source ="#(Midl)"
AdditionalIncludeDirectories ="%(Midl.AdditionalIncludeDirectories)"
AdditionalOptions ="%(Midl.AdditionalOptions)"
ApplicationConfigurationMode ="%(Midl.ApplicationConfigurationMode)"
ClientStubFile ="%(Midl.ClientStubFile)"
CPreprocessOptions ="%(Midl.CPreprocessOptions)"
DefaultCharType ="%(Midl.DefaultCharType)"
DllDataFileName ="%(Midl.DllDataFileName)"
EnableErrorChecks ="%(Midl.EnableErrorChecks)"
ErrorCheckAllocations ="%(Midl.ErrorCheckAllocations)"
ErrorCheckBounds ="%(Midl.ErrorCheckBounds)"
ErrorCheckEnumRange ="%(Midl.ErrorCheckEnumRange)"
ErrorCheckRefPointers ="%(Midl.ErrorCheckRefPointers)"
ErrorCheckStubData ="%(Midl.ErrorCheckStubData)"
ExcludedInputPaths ="$(ExcludePath)"
GenerateClientFiles ="%(Midl.GenerateClientFiles)"
GenerateServerFiles ="%(Midl.GenerateServerFiles)"
GenerateStublessProxies ="%(Midl.GenerateStublessProxies)"
GenerateTypeLibrary ="%(Midl.GenerateTypeLibrary)"
HeaderFileName ="%(Midl.HeaderFileName)"
IgnoreStandardIncludePath ="%(Midl.IgnoreStandardIncludePath)"
InterfaceIdentifierFileName ="%(Midl.InterfaceIdentifierFileName)"
LocaleID ="%(Midl.LocaleID)"
MkTypLibCompatible ="%(Midl.MkTypLibCompatible)"
OutputDirectory ="%(Midl.OutputDirectory)"
PreprocessorDefinitions ="%(Midl.PreprocessorDefinitions)"
ProxyFileName ="%(Midl.ProxyFileName)"
RedirectOutputAndErrors ="%(Midl.RedirectOutputAndErrors)"
ServerStubFile ="%(Midl.ServerStubFile)"
StructMemberAlignment ="%(Midl.StructMemberAlignment)"
SuppressCompilerWarnings ="%(Midl.SuppressCompilerWarnings)"
SuppressStartupBanner ="%(Midl.SuppressStartupBanner)"
TargetEnvironment ="%(Midl.TargetEnvironment)"
TypeLibFormat ="%(Midl.TypeLibFormat)"
TypeLibraryName ="%(Midl.TypeLibraryName)"
UndefinePreprocessorDefinitions ="%(Midl.UndefinePreprocessorDefinitions)"
ValidateAllParameters ="%(Midl.ValidateAllParameters)"
WarnAsError ="%(Midl.WarnAsError)"
WarningLevel ="%(Midl.WarningLevel)"
TrackerLogDirectory ="%(Midl.TrackerLogDirectory)"
MinimalRebuildFromTracking ="%(Midl.MinimalRebuildFromTracking)"
ToolArchitecture ="$(MidlToolArchitecture)"
TrackerFrameworkPath ="$(MidlTrackerFrameworkPath)"
TrackerSdkPath ="$(MidlTrackerSdkPath)"
TLogReadFiles ="#(MIDLTLogReadFiles)"
TLogWriteFiles ="#(MIDLTLogWriteFiles)"
ToolExe ="$(MIDLToolExe)"
ToolPath ="$(MIDLToolPath)"
TrackFileAccess ="$(TrackFileAccess)"
AcceptableNonZeroExitCodes ="%(Midl.AcceptableNonZeroExitCodes)"
YieldDuringToolExecution ="$(MidlYieldDuringToolExecution)"
>
</MIDL>
Can somebody please tell me whats going wrong here. This is driving me crazy!!!!!!
Got a similar error today on a project that I am converting to VS2010. I don't have a good solution to the problem yet, but I have a workaround. In my case, the project contained 2 idl files. Call them A.idl and B.idl. A.idl is the main idl for the project. It includes B.Idl. The error I received was:
error MSB4094: "A.idl;B.idl" is an invalid value for the "Source" parameter of the "MIDL" task. Multiple items cannot be passed into a parameter of type "Microsoft.Build.Framework.ITaskItem".
It seems that the build system searched for all idl files in the project and made a single call to the MIDL compiler with all of them even though that was bound to fail. I don't know why VS2010 does that and earlier version didn't (or maybe earlier versions of MIDL could handle multiple inputs).
The workaround: grab the MIDL arguments off of MIDL Command Line page of the project's properties. Then run MIDL by hand in a VS2010 Command Prompt window using those args. In my case, since A.idl includes B.idl, I only needed to run one MIDL command:
MIDL options-copied-from-project-properties A.IDL
It looks like you have multiple idl files in your project (hdxBinding.idl, hdxBlinking.idl, etc.). So the same trick might work for you.
Good luck
I ran into this issue trying to build the DataMonitor example from the TMG SDK with Visual Studio 2010. The problem from what I can tell is the MIDL > Output settings in the project - the Header File, IID File, Proxy File, and Type Library were set to "DataMonitor...", which was forcing those settings to be applied to all included IDL files (and not just the project's generated one).
Changing those settings to use %(Filename) instead and the project built fine.
When there are multiple IDL files in the project I converted from VS 2008 to VS 2010, I got this error. Since one IDL I had was included in the other. I disabled building of the included IDL file and it resolved this error.
These errors prop up when migrating to VS2010 as the .idl file properties are not migrated by VS2010 migrator. I got a similar error and resolved this by manually adding these parameters from to VS2010. Once done you will be able to get rid of these build errors.
I run into the same problem as well. The fix was (very confusing) remove empty in the vcxproj file. I run out of time and have not got to the bottom of why it helps - defining not empty HeaderFileName fixes the problem as well, other empty elements do not cause this problem (e.g. DllDataFileName).
If you want to reproduce bug or process of my investigation just create hello world and add two idl files. It should work. However if you add ItemGroupDefinition with Midl.HeaderFileName it should start failing. One wild guess is that it has something to do with batching of tasks (working example calls MIDL task for each file separately).
Related
I've just downloaded the Visual Studio 2017 Community.
Once I try to compile any program (even the simplest "Hello World") with any configuration (release/debug, x86/x64, empty project/windows console application), I get the following error:
Microsoft.CppCommon.targets(381,5): error MSB6006: error MSB6006: "CL.exe" exited with code -1073741515 (This error means STATUS_DLL_NOT_FOUND, I know it's been asked before, but I don't know how to check what DLLs are missed).
Microsoft.CppCommon.targets(381):
<CL Condition="'%(ClCompile.PrecompiledHeader)' != 'Create' and
'%(ClCompile.ExcludedFromBuild)'!='true' and
'%(ClCompile.CompilerIteration)' == '' and #(ClCompile) != ''"
Do you know how to check what DLLs are missing?
I'm new but i hope I'll answer quite properly. To reach the actual error code you need to change it to hex. Yours is
C0000135
. As far as I know it's file damage related,so you're right about dll missing. In older visuals the way to know it was via command line.
Ran msbuild.exe <my.sln> /t:<mytargetproject> from a VS2010 command prompt, where <my.sln> is your solution name and <mytargetproject> is the project you are trying to build. For e.g. msbuild.exe helloworld.sln /t:mainproj.
That is a cite from different post in stackoverflow.
Error Code -1073741515 When Using EDITBIN
Hope it will be easier for you to resolve problem with this. Can't help more as I don't use VS neither Windows. Good luck!
I have a UWP app that compiles successfully if I have UseDotNetNativeToolchain off. But when I turn it on, it gives me the cryptic error:
Internal compiler error: Object reference not set to
an instance of an object. UWPApp C:\Program Files
(x86)\MSBuild\Microsoft.NetNative\x86\ilc\IlcInternals.targets 887 Build
This is all it gives me. What could be causing this? How can I drill down on this.
Using VS2015
Here is the full build output in case that helps:
https://gist.github.com/shannah/e24fe8456313fb9ad98577c9a812f357
The solution to this problem was to disable optimization in a few assemblies I was using in the Default.rd.xml file. E.g.
<Assembly Name="IKVM.OpenJDK.Core" Dynamic="All" DoNotInline="true" DoNotOptimize="true"/>
I'm getting a null when running MSBuild with the /t:TransformAll target in a .csproj:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\TextTemplating\Microsoft.TextTemplating.targets(396,5): error : Running transformation: System.NullReferenceException: Object reference not set to an instance of an object.\r [C:\IDB-Git\IDB.Middleware\IDB.MW.Domain\IDB.MW.Domain.csproj]
No clue about what to do now. Is it a bug? How could I workaround this?
The following is an extract of the line 396 of Microsoft.TextTemplating.targets and its context:
<Target Name="ExecuteTransformations" DependsOnTargets="CreateT4ItemLists">
<TransformTemplates
TemplatesToProcess="#(T4TransformInputs)"
IncludeFolders="$(IncludeFolders)"
DirectiveProcessors="#(DirectiveProcessor)"
AssemblyReferences="#(T4AssemblyReference)"
ReferencePaths="#(T4ReferencePath)"
TrackerLogDirectory="$(TrackerLogDirectory)"
TrackFileAccess="$(TrackFileAccess)"
MinimalRebuildFromTracking="$(TransformOutOfDateOnly)"
OverwriteReadOnlyOutputFiles="$(OverwriteReadOnlyOutputFiles)"
ParameterValues="#(T4ParameterValues)"
>
You probably have a null reference in one of your templates being transformed. The TransformTemplates task will just fail and bubble up any exceptions from the transform of a template fails. The best way to find the culprit is to run the target one at a time for each template you have.
If you really want to validate that the TransformTemplates isn't to blame then you should run MS Build with diagnostic logging and ensure all of the TransformTemplates parameters have sensible values.
So I downloaded and installed Microsoft Accelerator v2 to use ParallelArrays. I have referenced it in my project but when I try and execute the code from the module in a script file I get:
"The namespace 'ParallelArrays' is not defined
I have followed the instructions on this post:
Microsoft Accelerator library with Visual Studio F#
I've added a reference to the managed version "Microsoft.Accelerator.dll" to my F# project and then added the native "Accelerator.dll" as an item in my solution and set it's 'Copy To Output Directory' to Copy Always.
Still getting the FSI error and inline error in my script file on the '#load ...' line, however the solution builds fine, and no error in the module file.
Any ideas on what I'm missing? I'm sure it's something stupid.
Thanks,
Justin
UPDATE
I tried mydogisbox's advice, which got rid of the error above, but now when I run the code in the .fsx file I get this error instead:
--> Referenced 'F:\Work\GitHub\qf-sharp\qf-sharp\bin\Debug\Microsoft.Accelerator.dll' (file may be locked by F# Interactive process)
[Loading F:\Work\GitHub\qf-sharp\qf-sharp\MonteCarloGPU.fs]
error FS0192: internal error: F:\Work\GitHub\qf-sharp\qf-sharp\Accelerator.dll: bad cli header, rva 0
UPDATE 2
So the bad header error has dissapeared, but now I get this instead:
Microsoft.ParallelArrays.AcceleratorException: Failure to create a DirectX 9 device.
at Microsoft.ParallelArrays.ParallelArrays.ThrowNativeAcceleratorException()
at Microsoft.ParallelArrays.DX9Target..ctor()
at <StartupCode$FSI_0002>.$FSI_0002_MonteCarloGPU.main#() in F:\Work\GitHub\qf- sharp\qf-sharp\MonteCarloGPU.fs:line 14
Stopped due to error
I found this thread on MSDN however the answers proposed as fixes on that thread barely even relate to the question.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/98600646-0345-4f62-a6c5-f03ac9c77179/ms-accelerator?forum=csharpgeneral
My Direct X version is 11, and I imagine that will suffice, however I tried installing DX9 however, it tells me that a newer version is detected therefore cant install.
There are special directives for referencing dlls from fsi. The #load directive loads the .fs file only. You need to use the #r directive to reference the file. You can either use the full path of the file or you can use #I to include the path to the file. More details here. Keep in mind that fsi is completely independent of your project, so all references in your project must be duplicated in fsi for it to access the same types.
I am trying to run a program that does not include any opencv files, but for some reason this error keeps popping up and preventing me from running the program.
LNK1104: cannot open file 'opencv_core246d.lib' C:\Users\Public\Documents\imgSwitchingFiles
Please can somebody shed light on this issue?
It looks like your project options state this library should be linked to your binaries. Did you reuse this project from elsewhere?
If you really don't need OpenCV, simply remove its libraries from the project linking options.
In project properties:
VC++ Directories>Library files>C:\OpenCV2.4.3\build\x86\vc9\lib
&
Linker>Input>Additional Dependencies>
Add the following under edit (each on a new line)
opencv_core243d.lib; opencv_imgproc243d.lib; opencv_highgui243d.lib; opencv_ml243d.lib; opencv_video243d.lib; opencv_features2d243d.lib; opencv_calib3d243d.lib; opencv_objdetect243d.lib; opencv_contrib243d.lib; opencv_legacy243d.lib; opencv_flann243d.lib;
Your file paths may be different i.e. vc10 instead of vc9 or u may have x64 instead of x86.
Also u will have 246 in every .lib instead of 243.