How can I animate the movement of a label or image? I would just like to make a slow transition from one location on the screen to another (nothing fancy).
For ios4 and later you should not use beginAnimations:context and commitAnimations, as these are discouraged in the documentation.
Instead you should use one of the block-based methods.
The above example would then look like this:
[UIView animateWithDuration:0.3 animations:^{ // animate the following:
myLabel.frame = newRect; // move to new location
}];
You're looking for the -beginAnimations:context: and -commitAnimations methods on UIView.
In a nutshell, you do something like:
[UIView beginAnimations:nil context:NULL]; // animate the following:
myLabel.frame = newRect; // move to new location
[UIView setAnimationDuration:0.3];
[UIView commitAnimations];
Here is an example with a UILabel - the animation slides the label from the left in 0.3 seconds.
// Save the original configuration.
CGRect initialFrame = label.frame;
// Displace the label so it's hidden outside of the screen before animation starts.
CGRect displacedFrame = initialFrame;
displacedFrame.origin.x = -100;
label.frame = displacedFrame;
// Restore label's initial position during animation.
[UIView animateWithDuration:0.3 animations:^{
label.frame = initialFrame;
}];
Related
in my viewcontroller entered all the objects in a scrollview. One of the buttons inside the scrollView creates an animation.
The scrollView get off the page -80.0 orgine.y
So far so good .. Now I want that when you click on the button the scrollview and then goes back down to -80.0 to +80.0 automatically returning to its original position so ... Can you tell me the best method for you to have this?
This is the action that fulfills my button when pushed ...
- (IBAction)AcceptFriendRequest:(id)sender {
PFObject *SelectedUser = [self.UtentiInAttesa objectAtIndex:[sender tag]];
[SelectedUser setObject:#"Confermato" forKey:#"STATO"];
[SelectedUser saveInBackground];
[UIView beginAnimations:nil context:NULL];
[UIView setAnimationDelegate:self];
[UIView setAnimationDuration:0.2];
[UIView setAnimationBeginsFromCurrentState:YES];
FFScrollView.frame = CGRectMake(FFScrollView.frame.origin.x, (FFScrollView.frame.origin.y - 80.0), FFScrollView.frame.size.width, FFScrollView.frame.size.height);
[UIView setAnimationRepeatAutoreverses:YES];
[UIView commitAnimations];
}
In your button event handler
- (IBAction)myBtnClicked:(id)sender {
// Create new CGRect indicate place where you would scroll to.
// Assume it is called `originalRect`
// Use the following method, it should work
[FFScrollView.scroll scrollRectToVisible:originalRect animated:YES];
}
i read alot about faking the animation of pushViewController, but I'm wondering if there is a way to change the actually animation, because I would like to use the navBar and the BackButton of the navigationController.
Currently I'm using this to animate:
- (void)viewWillDisappear:(BOOL)animated {
[super viewWillDisappear:YES];
[views setContentSize:CGSizeMake(self.view.bounds.size.width, self.view.bounds.size.height -40)];
CGRect frame = views.frame;
frame.origin.y = - self.view.bounds.size.height;
[UIView beginAnimations:#"viewSlideUp" context:nil];
[UIView setAnimationCurve: UIViewAnimationCurveEaseInOut];
[UIView setAnimationDuration:0.75];
[UIView setAnimationDelegate:self];
views.frame = frame;
[UIView commitAnimations];
}
but I get an overlapping effect, so my view isn't sliding up, the view is sliding away to the top left side.
Has anyone dealed with that problem? Thx for any kinda help!
I'm having a little problem. I have an UILabel which have an UILongPressGestureRecognicer. When the UILongPressGestureRecognizer is called my app is supposed to switch to a new view using a flip animation.
This is the code I have used for the GestureRecognizer:
UILongPressGestureRecognizer *labelLongPressRecognizer;
labelLongPressRecognizer = [[UILongPressGestureRecognizer alloc] initWithTarget:self action:#selector(LoadLabelSettings:)];
labelLongPressRecognizer.numberOfTouchesRequired = 1;
labelLongPressRecognizer.minimumPressDuration = 2.0;
[NewLabel addGestureRecognizer:labelLongPressRecognizer];
and this is the code for the view switching animation:
CGContextRef context = UIGraphicsGetCurrentContext();
[UIView beginAnimations:nil context:context];
[UIView setAnimationTransition: UIViewAnimationTransitionFlipFromRight forView:self.view cache:NO];
[UIView setAnimationCurve:UIViewAnimationCurveEaseInOut];
[UIView setAnimationDuration:1.0];
[self.view addSubview:LabelSettingsViewController.view];
[UIView commitAnimations];
if (self.interfaceOrientation == UIInterfaceOrientationLandscapeRight || self.interfaceOrientation == UIInterfaceOrientationLandscapeLeft) {
LabelSettingsViewController.view.frame = CGRectMake(0, 0, 480, 300);
}
My problem is that when I hold down on my UILabel the switch animation begins, but when I release it repeats the animation again. So basically the animation occur twice and I only want it to take place once.
Any ideas?
Thanks in advance :)
Are you checking the sender state, e.g.,
- (void)LoadLabelSettings:(UILongPressGestureRecognizer *)sender
{
if (sender.state == UIGestureRecognizerStateEnded) // or whatever
// then do the flipping stuff
}
Check out the "Overview" of the "UILongPressGestureRecognizer Class Reference", which talks about the long press being continuous and I presume numerous events could be triggered:
http://developer.apple.com/library/ios/#DOCUMENTATION/UIKit/Reference/UILongPressGestureRecognizer_Class/Reference/Reference.html
I am wondering if there was a way to animate the size and position of a UIWebView.
If I do sth like this:
[UIView animateWithDuration:1.0 animations:^{
self.frame = CGRectMake(20.0, 20.0, 80.0, 80.0);
}];
or
[UIView beginAnimations:#"zoomIn" context:nil];
[UIView setAnimationDuration:2.75];
[UIView setAnimationDelegate: self];
self.frame = CGRectMake(20.0, 20.0, 80.0, 80.0);
[UIView commitAnimations];
while there is a grey box doing the animation,
the content of the WebView instantly switches to the new size without animating.
(the scalesPageToFit property is set to YES)
any suggestions on that?
Haven't cracked the instant changing of the text width yet but you can get rid of the grey box by programmatically changing the background of the UIWebView to clearColor. Doesn't work if you do it through Interface Builder, for some reason.
I have a UIView that contains a couple UIButtons that I am animating from offscreen to onscreen. I find that the region where they are heading is clickable before they reach it. The animation is pretty simple, so I'm wondering if there is something obvious that I am missing in terms of telling the code to not treat the button as if it is at the final destination (I'm not sure if that is supposed to be the expected behavior and the animation is purely a visual while the clickable region is instantaneously at the destination; I wouldn't expect it to be).
Here is the code I use to animate it. It's basically switching out a sub panel and bringing back a main panel with buttons:
// switch back to main abilities panel
[UIView beginAnimations:nil context:NULL];
[UIView setAnimationDuration: kFadeInTime];
CGRect rect = CGRectMake(
480.0f,
mAbilities.mSubPanel.frame.origin.y,
mAbilities.mSubPanel.frame.size.width,
mAbilities.mSubPanel.frame.size.height);
mAbilities.mSubPanel.frame = rect;
[UIView commitAnimations];
[UIView beginAnimations:nil context:NULL];
[UIView setAnimationDuration: kFadeInTime];
[UIView setAnimationDelay: kFadeInTime];
rect = CGRectMake(
kAbilitiesBorderX,
mAbilities.mPanel.frame.origin.y,
mAbilities.mPanel.frame.size.width,
mAbilities.mPanel.frame.size.height);
mAbilities.mPanel.frame = rect;
[UIView commitAnimations];
As a workaround you can disable user interaction with your panel before animations and reenable it when animation finishes:
// Animation compete handler
- (void)animationDidStop:(NSString *)animationID finished:(NSNumber *)finished context:(void *)context{
mAbilities.mSubPanel.userInteractionEnabled = YES;
}
// Animating panel
mAbilities.mSubPanel.userInteractionEnabled = NO;
[UIView beginAnimations:nil context:NULL];
[UIView setAnimationDuration: kFadeInTime];
[UIView setAnimationDelegate: self];
CGRect rect = CGRectMake(
480.0f,
mAbilities.mSubPanel.frame.origin.y,
mAbilities.mSubPanel.frame.size.width,
mAbilities.mSubPanel.frame.size.height);
mAbilities.mSubPanel.frame = rect;
[UIView commitAnimations];
If you're targeting iOS4 you can (and as specs say should) use block-based animation api:
[UIView animateWithDuration:5.0f delay:0.0f options:UIViewAnimationOptionLayoutSubviews
animations:^(void){
CGRect rect = CGRectMake(
480.0f,
mAbilities.mSubPanel.frame.origin.y,
mAbilities.mSubPanel.frame.size.width,
mAbilities.mSubPanel.frame.size.height);
mAbilities.mSubPanel.frame = rect;
}
completion:NULL
];
While animating using blocks user interaction is disabled by default - you can enable it by setting UIViewAnimationOptionAllowUserInteraction flag in options parameter:
... options:UIViewAnimationOptionLayoutSubviews | UIViewAnimationOptionAllowUserInteraction ...