I am trying to use the instructions here to install a pre-released version of a gem with bundler.
The "bundle install" output lists the gem as getting installed, but "gem list" fails to find it.
My Gemfile:
source :gemcutter
gem 'sinatra', '1.1.0', :git => 'http://github.com/sinatra/sinatra.git'
gem 'RedCloth', '4.2.3'
Here is a gist with the rest of my sample code.
Has anyone gotten this scenario to work?
NOTE: I am also using RVM (on OS X). bundle show does list the gem (and dependencies) as existing, but I am not able to properly resolve them.
Thanks.
I would look at the load paths, and further debug from there, example:
...(master) $ irb
irb(main):001:0> $LOAD_PATH.count
=> 8
irb(main):004:0> require 'bundler/setup'
=> true
irb(main):005:0> $LOAD_PATH.count
=> 112
irb(main):006:0>
Bundler configures the load path for you, this means not all the gems are included on your load path by default.
Additionally, from the bundler git help:
Because Rubygems lacks the ability to handle gems from git, any gems installed from a git repository will not show up in gem list. They will, however, be available after running Bundler.setup.
Best regards, hope this helps
ED
Bundler might have installed it locally to your app. This could vary wildly, depending on OS and whether you are using RVM.
What is the output of bundle show sinatra?
In my case, sinatra was installed here:
/home/marshall/.rvm/gems/ruby-1.8.7-p302#3846859/bundler/gems/sinatra-9cfa74a7f352
Sinatra doesn't show in the gems list, but the server launches correctly if I execute rackup.
Gems installed via bundler on Engine Yard go to a different folder to isolate them.
it's usually /data/APP_NAME/shared/bundled_gems
To be sure, check your .bundle/config file on your APP folder at Engine Yard
It looks like there is an issue using Shotgun and Bundler (git repositories only).
If I use rackup to start up my app, all is well. I am going to investigate a little more and then file a bug with one (or both) of the projects.
Related
I'm developing a couple of private gems and I think I don't understand correctly the PATH/GEM_PATH and/or Bundler/RVM installation flow, would love if someone could chip in.
I have a repository with two gems (A & B for simplicity sake). I've developed the gems using the scaffolding + following the guidelines provided by this bundler tutorial.
Thanks to the Bundler project I have a few Rakefile tasks like rake build, rake install, rake install:local and rake release. Because of the private nature of these gems I can't release them to RubyGems (and we haven't looked into hosting our rubygems).
My machines are using RVM to manage ruby versions and Bundler version 1.15.1
What I want to do: Assuming a new machine/developer trying out the project, ideally we would cd into each of the subfolders (currently 2, gem A and gem B), run rake install and after that we should have the gems available system wide for the current user.
What is happening: The gems are built and work properly, but they are only available inside the subfolder of each gem i.e. gem A is only available inside the subfolder A and gem B is only available inside subfolder B.
What I've tried: So, after rake build/install/install:local a new .gem file is generated under pkg. I've tried to manually install the "compiled" file using gem install pkg/A.gem, gem install --local pkg/A.gem and gem install --local --user-install pkg/A.gem without success. (there are plenty of SO questions/answers about this)
I believe this has something to do with the PATH variables, but like I said before I don't fully understand the way they are managed. I get the following results from these commands:
# Our gem
> gem which A
/home/ubuntu/.rvm/gems/ruby-2.4.0/gems/A-0.1.8/lib/A.rb
# Pry, available globally
> gem which pry
/home/ubuntu/.rvm/gems/ruby-2.4.0/gems/pry-0.11.1/lib/pry.rb
I've been lost and frustrated for far too long now, any help is appreciated. Also open to hear suggestions of better private gem installation flows :)
Yes, it has something to do with your PATH variables. Your installation seems to be good.
I advise you to first affirm your gems installation path with:
echo $GEM_HOME
The double check your PATH to ensure its present and also confirm that the GEM home is also where the gem got installed into from the rake install
echo $PATH
If not, put it in your path and you should be fine with something like this:
echo PATH=$PATH:$GEM_HOME >> ~/.bashrc
source ~/.bashrc
Build your gem as per that guide you linked. You should end up with a gem file. Distribute this as you see fit (I use rsync/crontab to download newer gem versions but anything goes). User can install the gem as follows:
gem install --user-install /path/to/your/file.gem
This will install the gem in the user's ~/.gem/ruby/<version>/gems/<your-gem-name> directory.
Tried it with an empty gem (foodie, as in that example guide) and it works fine. But if you don't specify the --user-install parameter it will try to install in the system ruby dir (/usr/lib/ruby/gems...)
I'm deploying my rails project to production server. There is only 1.9.3 version of ruby (I developed on 2.1.2) so there is few compatibility problems in gems versions. More over, I downloaded one of gems to vendor/gem_name and made necessary fixes in its sources, so I need to use exactly my version of that gem and, as you understand, It's not possible to update it.
in Gemfile
require 'gem_name', :path => 'vendor/gem_name'
So after cloning project to server I run
bundle install --path vendor/bundle
and it created bundle directory in vendor folder with gems versions, needed to me, inside it.
After that I tried to run fetching script to fill db with some data by command
ruby *_fetch.rb
inside *_fetch.rb:
require 'gem_name'
And it fails with error
You have already activated gem_name older_version, but your Gemfile requires
gem_name newest_version. Using bundle exec may solve this. (Gem::LoadError)
from /usr/local/rvm/gems/ruby-1.9.3-p374/gems/bundler-1.3.5/lib/bundler/runtime.rb:19:in `setup'
So how could I specify script to require my edited local gem?
Run it with bundle exec That's exactly what bundle exec is for.
I've forked the redis depository on github to https://github.com/lmirosevic/redis-rb
I added it to my Gemfile:
gem 'redis', :github => 'lmirosevic/redis-rb'
And I require the gem inside my Sinatra app:
require 'redis'
However it fails with the following error:
/app/vendor/ruby-2.0.0/lib/ruby/site_ruby/2.0.0/rubygems/core_ext/kernel_require.rb:45:in `require': cannot load such file -- redis (LoadError)
Any suggestions on what could be wrong? It seems like it should work!
EDIT
I should note that the bundler phase is fine. The problem seems to be in the require step.
Bundler gives me this output:
Using redis (3.0.4) from git://github.com/lmirosevic/redis-rb (at master)
I should also say that my directory structure is something like this. Not sure if this makes a difference.
/
.env
Gemfile
Gemfile.lock
Procfile
/lib
my_sinatra_app.rb
/config
...
You must have
require 'bundler/setup'
in your app or else you're not really using bundler: this is what ensures that the gem versions loaded are the ones in your gemfile and sets up load paths for anything not installed globally.
Calling Bunder.setup allows you to control what groups are used, but if just using the default group is fine then you don't need to do this.
If you aren't setting up bundler then your gemfile is used to install the required versions of the gems but then bundler is no longer used - your app will used whatever gems are installed, whether the versions match or not and you won't be able to use gems that aren't installed in the default gem load paths.
I'm creating a ruby gem using Bundler for a simple rackup app (not Rails). It's a real pain to run rake install and then restart the webserver everytime. For most part it's ok because I test everything using rspec but not design. My gem contains a whole lot of design and everytime I update my gem I have to go threw the same procedure.
Is it possible to build gems locally without having to run rake install and then restart my rack server every single time?
If you're using Bundler to manage the gems in your application, you can use Bundler's path directive to use a gem that's currently in development.
In your Gemfile:
# My awesome gem that I'm developing
gem 'some-awesome-gem', :path => '~/Projects/some_awesome_gem'
Essentially, just point the path at the directory where your gem resides and you won't have to package new versions of the gem while you're actively developing it.
See the Bundler homepage and Gemfile Manual for more details.
I'm new to Ruby. I have a .bundle file. I put it in the source folder and did
require('my.bundle')
But when I call the methods in the bundle, the definition is not found. Do I have to install them or include them in some other way to access them?
I am on Ruby version 1.8.7 (latest version on Mac).
I highly recommend using RVM to manage your Ruby installation, including your gems, so if you don't already have that, get it and follow the instructions for installing it. Make sure you do the part about modifying your bash startup script or you'll see weird behavior, like the wrong Ruby being called. Also, use the steps in "RVM and RubyGems" to install your gems or you can run into weird behavior with gems being installed under the wrong or an unexpected Ruby.
Second, use the gem command to install gems:
gem install gem_to_install
replacing "gem_to_install" with the name of the gem you want, and it will be installed into the appropriate gem folder for your Ruby.
If you are on Ruby 1.92, and trying to require a gem to use as a module in your code, use:
require 'gemname'
if it is installed via the gem command. And, if it is a module you wrote or have in your program's directory or below it, use:
require_relative 'path/to/gem/gemname'
If you are on a Ruby < 1.9 you'll also need to add require 'rubygems' above your other require lines, then use require './path/to/gem/gemname'.
Thanks, but my .bundle is not in gems. How do I install/require a .bundle file I already have?
If you wrote it look into rubygems/gemcutter or bundler for info on bundling and managing gems.
You can install a gem without using the app by going into the directory containing the gem and running setup.rb. See http://i.loveruby.net/en/projects/setup/doc/usage.html for a decent writeup or the official docs at: http://docs.rubygems.org/read/chapter/3