I have many folders in a directory that contain various files. Each filename begins with XXX_ where XXX could be the name of the folder the file is in. What I am needing to do is to go through all those folders and delete any file where XXX is the name of the folder that file is in.
Please have an eye out this question: Iterating through folders and files in batch file?.
I think this should help you.
Please let me know if you need further assistance.
EDIT #1
The joker character in DOS command line is *. Then, while searching a directory for certain files, you may consider your regular expression, that is, your XXX_, and complete it with *, this shall return only the files for which you're looking for.
This means that instead of *.zip pattern in one of the FOR loops given the linked question, your first FOR loop should contain your directory name, then take this variable concatenated with the * character to obtain only the files you're looking for.
For example, consider trying the following:
dir /s XXX_*.*
This should return only the files you're interested in, given the right folder name.
EDIT #2
Thanks for having precised your concern.
Here is a code sample that, I do hope so, should help. Now I know you say you have the looping correct, so that perhaps only piece of this code might be needed.
#echo off
setlocal enableextensions enabledelayedexpansion
for /F "delims==" %%d in ('dir /ogne /ad /b /s .') do (
for /F "delims==" %%f in ('dir /b "%%d\%%~nd_*.*"') do (
echo %%d\%%f
)
)
endlocal
This works and lists the files contained in subfolders from the current (.) folder.
I have tested it from the following folder:
C:\Docume~1\marw1\MyDocu~1\MyMusi~1
Where a 'XXX' folder is contained. This 'XXX' folder contains the following files:
Copy of XXX_blah.bmp;
XXX_blah.bmp;
XXX_1234.ppt;
XXX_textfile.txt.
From this structure, the output is:
C:\Docume~1\marw1\MyDocu~1\MyMusi~1\XXX\XXX_blah.bmp
C:\Docume~1\marw1\MyDocu~1\MyMusi~1\XXX\XXX_1234.ppt
C:\Docume~1\marw1\MyDocu~1\MyMusi~1\XXX\XXX_textfile.txt
I then suspect that putting a del instruction instead of an echo command shall do the trick. This means that to isolate the foldername itself from its path, you need to use the ~n instruction with your folder variable name like %%~nd, where your iterating folder variable name is %%d.
Furthermore, you could even use a parameterized batch file in the process, instead of hardcoding it, that is, if your 'set YourFolder =...' is part of your production code. This could look like:
#echo off
setlocal...
set root = %1
set root = %root:~1%
set root = %root:~0,-1%
...
endlocal
Instead of having '.' as pictured in my first FOR loop, your would replace it with "%root%" in order to consider your command line parameter instead of a hardcoded filepath.
I do help this helps, sincerely!
As Ron says, since the question is tagged "windows".
EDIT:
Ron's answer, which seems to have disappeared!, was to use del /s
EDIT2:
OK, it's valid only for file names, not for directories. For the directories you'd have to use something like sketched below.
Additional info: when you want to do the same thing recursively to files in a directory tree, and (unlike del) there's no command that already does the traversing for you, you can use the /R option of the for command.
To see the for command's docs, do e.g. start "for-help" cmd /k for /?.
Cheers & hth.,
– Alf
cd C:\"foldername"
del /s XXX_"*"
cls
exit
Related
I'm using the following batch code to convert all files in a certain directory if the target file doesn't already exist however I'm stuck at getting this to run through every submap and file within that (and keep the output relative with that submap)
So I currently use this:
for %%f in (input/textures/*.*) do ( IF NOT EXIST "ouput/textures/%%~nf.dds" (
"bin/ThempImageParser.exe" "input/textures/%%f" "ouput/textures/%%~nf.dds"
)
)
This works perfectly for a single folder (as was intended), it takes all the files in that specific folder, and passes them as arguments to my executable, which then outputs the file on the path of the second argument.
However this also contains a flaw (this is an additional problem though..) as it does not work if the output -folder- does not exist, so if possible I'd also want it to create the folder if need be.
I've found some batch documentation (I really don't have much experience with Batch) showing me a command called FORFILES and the /R parameter, however I couldn't adjust this so it'd keep the relative paths for the output too, it'd require string manipulation and I have no clue on how to do that.
So the result I'm after is something like this, it takes any file deeper than "input/textures/ for example:
input/textures/some/very/deep/submap/why/does/it/go/on/myfile.anyExtension
it should then take that file (and relative path) and basically change "input" with "output" and replace the file extension with .dds like this:
ouput/textures/some/very/deep/submap/why/does/it/go/on/myfile.dds
and pass those two strings to my executable.
#ECHO Off
SETLOCAL ENABLEDELAYEDEXPANSION
SET "sourcedir=U:\sourcedir\t w o"
SET "destdir=U:\destdir\wherever\something"
FOR /f "delims=" %%a IN ('xcopy /y /L /s "%sourcedir%\*"') DO (
SET "destfile=%%a"
SET "destfile=!destfile:*%sourcedir%=%destdir%!"
IF /i "%%a" neq "!destfile!" (
FOR %%m IN ("!destfile!") DO IF NOT EXIST "%%~dpm%%~na.dds" (
ECHO MD "%%~dpm"
ECHO "bin\ThempImageParser.exe" "%%a" "%%~dpm%%~na.dds"
)
)
)
GOTO :EOF
You would need to change the settings of sourcedir and destdir to suit your circumstances.
First, perform an xcopy with the /L option to list-only the individual fullnames of files that would be copied by the xcopy.
Assign each name found from %%a to destfile, then remove all characters before the source-directoryname from that filename, and replace that string with the destination directoryname.
This will yield the destination name for the file (with the original extension). The only exception will be the very last output line, which is a count-of-files report. Since this line will not contain the source directoryname, the replacement will not take place, so %%a will be the same as !destfile! - so we eliminate that.
Now assign the destination filename to a metavariable so we can select its various parts, and if the filename made from the destination drive and pathname, the name part of the original file and .dds does not exist, then make the destination directoryname and execute the imageparser, providing the desired output filename.
Note that these last two are ECHOed instead of being executed for testing purposes. Remove the ECHOes to actually perform the command.
Note that / is a switch-indicator, \ is a directory-separator.
Note that MD will report an error if the directory already exists. Append 2>nul to the end of the md command to suppress that error message.
I am very new to coding and bulk processes but i am looking for a command line SPECIFICALLY for windows command prompt and i am wondering if such a thing exists. So I have a folder containing 111 subfolders, with each subfolder containing between 20 and 40 png image files. Each subfolder is named 001-111 accordingly and the png files are ordered how i want them, however i am looking for a command line that would be able to quickly and efficiently name all the pngs in the folders to the name of the folder followed by the png number in brackets
e.g. for folder 037, i would want the png's to be renamed to: 037(1), 037(2), 037(3) etc...
I am hoping for the best although i am unsure such a code may not be possible or be simply done.
Also if you come up with a code that achieves this process, it would be great if you could reply with the simple command line that i could use rather than a full explanation because i am new to coding and far from fluent with the language or terms or how things work. I know this same process can be achieved by going select all>rename (ctrl a>f2) and renaming to the folder name however i need to use this process frequently and dont want to have to open each folder, i would rather have a command line for cmd that would do it swiftly
Thank you and a simple answer would be greatly appreciated
#ECHO OFF
SETLOCAL ENABLEDELAYEDEXPANSION
SET "parentdir=u:\parent"
FOR /l %%a IN (1001,1,1111) DO (
SET dir=%%a&SET "dir=!dir:~1!"
FOR /f "delims=" %%i IN ('dir /a-d /b "%parentdir%\!dir!\*.png" 2^>nul') DO (
ECHO REN "%parentdir%\!dir!\%%~nxi" "!dir!(%%~ni)%%~xi"
)
)
GOTO :EOF
Test results:
Starting directory :
u:\parent\001\1.png
u:\parent\037\1.png
u:\parent\037\2.png
u:\parent\111\999 with spaces in name.png
Script response
REN "u:\parent\001\1.png" "001(1).png"
REN "u:\parent\037\1.png" "037(1).png"
REN "u:\parent\037\2.png" "037(2).png"
REN "u:\parent\111\999 with spaces in name.png" "111(999 with spaces in name).png"
Obviously, you'd need to replace the value assigned to parentdir with your actual target directory name.
The script will report the renames it proposes to do. To actually invoke the rename remove the ECHO keyword.
I would create a batch file like so:
renamepng.bat:
cd %%1
if ERRORLEVEL 1 goto end
for %f in *.png do mv "%f" "%%1(%f).png"
cd ..
:end
This will attempt to cd to the directory name provided on the command line, abort if that fails, then rename all the .png files and return to the previous directory
then call it like so:
for %d in ??? do call renamepng.bat %d
which will loop through all 3-character file and directory names in the current directory, can call the batch file on each one. Using call instead of just the batch file name causes execution to return to the loop when the batch finishes.
I need to write/use a batch file that processes some imagery for me.
I have one folder full of nested folders, inside each of these nested folders is one more folder that contains a number of TIF images, the number of images vary in each folder. I also have a batch file, lets call it ProcessImages.bat for Windows that you can "drop" these TIF files on (or obviously specify them in a command line list when invoking the bat); upon which it creates a new folder with all my images process based on an EXE that I have.
The good thing is that because the bat file uses the path from the folders you "drop" onto it, I can select all the TIFs of one folder and drop it to do the processing... but as I continue to manually do this for the 300 or so folders of TIFs I have I find it bogs my system down so unbelievably and if I could only process these one at a time (without manually doing it) it would be wonderful.
All that said... could someone point me in the right direction (for a Windows bat file AMATEUR) in a way I can write a Windows bat script that I can call from inside a directory and have it traverse through ALL the directories contained inside that directory... and run my processing batch file on each set of images one at a time?
You may write a recursive algorithm in Batch that gives you exact control of what you do in every nested subdirectory:
#echo off
call :treeProcess
goto :eof
:treeProcess
rem Do whatever you want here over the files of this subdir, for example:
for %%f in (*.tif) do echo %%f
for /D %%d in (*) do (
cd %%d
call :treeProcess
cd ..
)
exit /b
Aacini's solution works but you can do it in one line:
for /R %%f in (*.tif) do echo "%%f"
Jack's solution work best for me but I need to do it for network UNC path (cifs/smb share) so a slight modification is needed:
for /R "\\mysrv\imgshr\somedir" %%f in (*.tif) do echo "%%f"
The original tip for this method is here
Posting here as it seems to be the most popular question about this case.
Here is an old gem I have finally managed to find back on the internet: sweep.exe. It executes the provided command in current directory and all subdirectories, simple as that.
Let's assume you have some program that process all files in a directory (but the use cases are really much broader than this):
:: For example, a file C:\Commands\processimages.cmd which contains:
FOR %%f IN (*.png) DO whatever
So, you want to run this program in current directory and all subdirectories:
:: Put sweep.exe in your PATH, you'll love it!
C:\ImagesDir> sweep C:\Commands\processimages.cmd
:: And if processimages.cmd is in your PATH too, the command becomes:
C:\ImagesDir> sweep processimages
Pros: You don't have to alter your original program to make it process subdirectories. You have the choice to process the subdirectories only if you want so. And this command is so straightforward and pleasant to use.
Con: Might fail with some commands (containing spaces, quotes, I don't know). See this thread for example.
I know this is not recursion (iteration through enumerated subdirectories?), but it may work better for some applications:
for /F "delims=" %%i in ('dir /ad /on /b /s') do (
pushd %%i
dir | find /i "Directory of"
popd
)
Replace the 3rd line with whatever command you may need.
dir /ad - list only directories
The cool thing is pushd does not need quotes if spaces in path.
rem Replace "baseline" with your directory name
for /R "baseline" %%a in (*) do (
echo %%a
)
I have a list of files in a folder that end with .swf.
I want to change all those files from X.swf to X<some number>.swf.
How can I do that?
This little script will change all *.swf files into the equivalent *_42.swf files.
#setlocal enableextensions enabledelayedexpansion
#echo off
for /f %%a in ('dir /b *.swf') do (
set fspec=%%a
set newfspec=!fspec:~0,-4!_42.swf
echo ren !fspec! !newfspec!
)
endlocal
Actually, as it stands now, it will just echo the commands that it wants to execute. Once you're happy they're correct, you can just remove the echo from that renaming line above.
It works by using for /f to get a list of all SWF files and then using string manipulation to:
remove the last four characters (the.swf extension); then
add a new _42.swf extension onto the end.
And, please, make sure you back them up first :-)
You could use the following one-liner directly from the command prompt:
FOR %F IN (*.swf) DO RENAME "%F" "%~nF123.*"
where 123 stands for your number of choice.
Alternatively you could create a batch file and take advantage of its ability to accept parameters. Use the following script:
#ECHO OFF
SET "suffix=%~1"
FOR %%F IN (*.swf) DO RENAME "%%F" "%%~nF%suffix%.*"
Now if the batch's name is renamer.bat, you can invoke it like this:
renamer.bat 2011
and it will add 2011 to the name of every .swf file in the current directory.
Assuming <X> in your description is supposed to be constant and you don't explicitly require a batch script to solve your problem, you can use Windows Explorer as mentioned in an article by Microsoft titled "Rename a file".
Here's a an extract from said article:
"You can also rename several files at one time, which is useful for grouping related items. To do this, select the files [then press F2]. Type one name, and then each of the files will be saved with the new name and a different sequential number at the end (for example, Renamed File (2), Renamed File (3), and so on)."
I'm trying to teach myself some simple DOS commands and have used relatively simple commands to copy or move files, however this specific request is presenting a challenge for me and would appreciate some expertise from this forum.
C:\Parent\library.eds (location of my source file)
Any time I update library.eds in the parent directory, I would like to copy that file into every Child directory that contains a folder named "LIB". I have standardized the Child directories to the following:
C:\Parent\Child1\INPUT
C:\Parent\Child1\OUTPUT
C:\Parent\Child1\LIB {paste library.eds here}
C:\Parent\Child2\INPUT
C:\Parent\Child2\OUTPUT
C:\Parent\Child2\LIB {paste library.eds here}
and loop through until all children with LIB directories contain the updated file "library.eds"
Thank you for your help!
Mark
Here's a command that can get you started:
FOR /F "delims=" %%D IN ('DIR /b /a:D /s C:\Parent\LIB') DO #ECHO COPY "C:\Parent\library.eds" "%%~D"
Once you get it working the way you want, remove the #ECHO part to actually do the copy:
FOR /F "delims=" %%D IN ('DIR /b /a:D /s C:\Parent\LIB') DO COPY "C:\Parent\library.eds" "%%~D"
Extra help for these commands
HELP FOR
HELP DIR
How this works
FOR /F ... %variable IN ('command') DO otherCommand %variable...
This lets you execute command, and loop over its output. Each line will be stuffed into %variable, and can be expanded out in otherCommand as many times as you like, wherever you like. %variable in actual use can only have a single-letter name, e.g. %V.
"delims="
This lets you ignore any whitespace output by 'command', so it properly handles directories that have spaces in their names.
DIR /b /a:D /s C:\Parent\LIB
This will search for all files under C:\Parent that have the name LIB. It will recursively go through subdirectories because of /s. It will only find directories (because of /a:D). It will output them in a way that is useful for looping, because of /b.
%%D instead of %D
This is required in batch files. If you did this on the command prompt, you would use %P instead.
if you know all the child directories before hand the simplest solution is batch files tutorial on batch files
I dont know how loops work in ms dos but in linux bash shell loops are simple to program..
Any ways batch files are the simplest option
if you can download cygwin then you can use the following bash script to do the job without hardcoding it
The code
P.S you will need to change the name of the folder from tmp to LIB and the filename from LOL to ur file name .. The script is pretty self explanatory.
Unix shells are better than MS-DOS so it might be a good idea to get cygwin anyways