Someone send me a script today starting with #: and after googling I didn't found any answer.
Even if the script works I wonder what does that mean.
Wow! That's brings backs lots of memories!
Back in the 1980s and early 1990s, there were two basic shells, Bourne shell (/bin/sh) and C shell (/bin/csh).
Bourne shell had very few user friendly things. There were no aliases or command substitutions. Therefore, most people liked using C Shell as their default shell.
However, Csh was a terrible scripting language. (See http://www.faqs.org/faqs/unix-faq/shell/csh-whynot/). Therefore, you used C shell as your shell, but wrote your scripts in Bourne shell which had a much better syntax.
However, there was a tiny little problem: Since your default shell is C Shell, typing a shell script name at the command line, and the C Shell would pick it up and try to execute it.
To get around this, you put : as the first line in your program. This was a Bourne shell comment, but was an invalid C Shell command. Thus the script would fail to run if you forgot to put sh in front of it.
Later on, systems would know if the first line was :, it should be a Bourne shell script. And, even later, you could put #: so it would be a comment and not a command. Some people put the name of the shell, /bin/sh next to it to help remind people were suppose to run this as a Bourne shell script.
C shell started dying out after Kornshell started becoming popular. It was about this time when the shebang (#!) came out, but that was only for AT&T and not the Berkeley derived systems. BSD systems didn't get the shebang until the late 1980s. And, Sun people used C Shell as their default shell until Solaris came out.
I hadn't seen a program begin with #: /bin/sh in ages.
BTW, it is common to start your scripts this way:
#! /usr/bin/env perl
This way, you use the version of Perl that's in your path and don't have to worry what directory it is in. For example, if you begin your script with:
#! /usr/local/bin/perl
And, Perl is actually in /usr/bin, your script won't run. The env program is always in /usr/bin and is guaranteed to work. Of course, if you want to use a specific version of Perl and not the one that is in the path, you'd go with the first method.
This is a comment only...
#:/bin/sh
a shebang is #!. Everything else starting with a # is a comment.
example:
run a script starting with
#!/usr/bin/perl
and it'll be run by perl. Now, replace the '!' by ':' and you'll run it with the defaut interpreter, which is your shell.
Related
I have been working on a few scripts on CentOS 7 and sometimes I see:
#!/bin/sh -
on the first line. Looking at the man page for sh I see the following under the Special Parameters
- Expands to the current option flags as specified upon invocation,
by the set builtin command, or those set by the shell
itself (such as the -i option).
What exactly does this mean? When do I need to use this special parameter option??
The documentation you are reading has nothing to do with the command line you're looking at: it's referring to special variables. In this case, if you run echo $- you will see "the current option flags as specified upon invocation...".
If you take a look at the OPTIONS part of the bash man page, you will find:
-- A -- signals the end of options and disables further option processing.
Any arguments after the -- are treated as filenames and arguments. An
argument of - is equivalent to --.
In other words, an argument of - simply means "there are no other options after this argument".
You often see this used in situation in which you want to avoid filenames starting with - accidentally being treated as command options: for example, if there is a file named -R in your current directory, running ls * will in fact behave as ls -R and produce a recursive listing, while ls -- * will not treat the -R file specially.
The single dash when used in the #! line is meant as a security precaution. You can read more about that here.
/bin/sh is an executable representing the system shell. Actually, it is usually implemented as a symbolic link pointing to the executable for whichever shell is the system shell. The system shell is kind of the default shell that system scripts should use. In Linux distributions, for a long time this was usually a symbolic link to bash, so much so that it has become somewhat of a convention to always link /bin/sh to bash or a bash-compatible shell. However, in the last couple of years Debian (and Ubuntu) decided to switch the system shell from bash to dash - a similar shell - breaking with a long tradition in Linux (well, GNU) of using bash for /bin/sh. Dash is seen as a lighter, and much faster, shell which can be beneficial to boot speed (and other things that require a lot of shell scripts, like package installation scripts).
Dash is fairly well compatible with bash, being based on the same POSIX standard. However, it doesn't implement the bash-specific extensions. There are scripts in existence that use #!/bin/sh (the system shell) as their shebang, but which require bash-specific extensions. This is currently considered a bug that should be fixed by Debian and Ubuntu, who require /bin/sh to be able to work when pointed to dash.
Even though Ubuntu's system shell is pointing to dash, your login shell as a user continues to be bash at this time. That is, when you log in to a terminal emulator anywhere in Linux, your login shell will be bash. Speed of operation is not so much a problem when the shell is used interactively, and users are familiar with bash (and may have bash-specific customization in their home directory).
Question is just in the title: What happens when you run exec csh in a UNIX shell and why?
The exec command replaces the current process with the one specified, so the Unix Shell stops being a Unix Shell and suddenly becomes the C Shell (csh, which just so happens to be a kind of Unix Shell). Why? That's just the de facto standard.
exec will replace the current shell process with a new process. If you skip this the command you enter will be started as a child and return back to your shell when you exit the child. It expects the executable to start as the first argument.
csh (the first argument) is the name of a executable. It will be searched in PATH. Typically it finds a system installed C Shell (like /bin/csh) or a C Shell clone (like tcsh installed under the legacy name).
So effectively you are replacing your current shell session with a C Shell. And unless you are a bearded Unix guru you don't want that - ever. Normally a C Shell has a % prompt instead of > in Posix or Bourne Shells.
You can recover from it by logging out. Next time you login the normal default shell (which is most likely not csh) will be started. To make the switch of a shell permanent the chsh (change shell) command is used.
I am using Bash
$ echo $SHELL
/bin/bash
and starting about a year ago I stopped using Shebangs with my Bash scripts. Can
I benefit from using #!/bin/sh or #!/bin/bash?
Update: In certain situations a file is only treated as a script with the
Shebang, example
$ cat foo.sh
ls
$ cat bar.sh
#!/bin/sh
ls
$ file foo.sh bar.sh
foo.sh: ASCII text
bar.sh: POSIX shell script, ASCII text executable
On UNIX-like systems, you should always start scripts with a shebang line. The system call execve (which is responsible for starting programs) relies on an executable having either an executable header or a shebang line.
From FreeBSD's execve manual page:
The execve() system call transforms the calling process into a new
process. The new process is constructed from an ordinary file, whose
name is pointed to by path, called the new process file.
[...]
This file is
either an executable object file, or a file of data for an interpreter.
[...]
An interpreter file begins with a line of the form:
#! interpreter [arg]
When an interpreter file is execve'd, the system actually execve's the
specified interpreter. If the optional arg is specified, it becomes the
first argument to the interpreter, and the name of the originally
execve'd file becomes the second argument
Similarly from the Linux manual page:
execve() executes the program pointed to by filename. filename must be
either a binary executable, or a script starting with a line of the
form:
#! interpreter [optional-arg]
In fact, if a file doesn't have the right "magic number" in it's header, (like an ELF header or #!), execve will fail with the ENOEXEC error (again from FreeBSD's execve manpage):
[ENOEXEC] The new process file has the appropriate access
permission, but has an invalid magic number in its
header.
If the file has executable permissions, but no shebang line but does seem to be a text file, the behaviour depends on the shell that you're running in.
Most shells seem to start a new instance of themselves and feed it the file, see below.
Since there is no guarantee that the script was actually written for that shell, this can work or fail spectacularly.
From tcsh(1):
On systems which do not understand the `#!' script interpreter conven‐
tion the shell may be compiled to emulate it; see the version shell
variable. If so, the shell checks the first line of the file to see if
it is of the form `#!interpreter arg ...'. If it is, the shell starts
interpreter with the given args and feeds the file to it on standard
input.
From FreeBSD's sh(1):
If the program is not a normal executable file (i.e., if it
does not begin with the “magic number” whose ASCII representation is
“#!”, resulting in an ENOEXEC return value from execve(2)) but appears to
be a text file, the shell will run a new instance of sh to interpret it.
From bash(1):
If this execution fails because the file is not in executable format,
and the file is not a directory, it is assumed to be a shell script, a
file containing shell commands. A subshell is spawned to execute it.
You cannot always depend on the location of a non-standard program like bash. I've seen bash in /usr/bin, /usr/local/bin, /opt/fsf/bin and /opt/gnu/bin to name a few.
So it is generally a good idea to use env;
#!/usr/bin/env bash
If you want your script to be portable, use sh instead of bash.
#!/bin/sh
While standards like POSIX do not guarantee the absolute paths of standard utilities, most UNIX-like systems seem to have sh in /bin and env in /usr/bin.
Scripts should always begin with a shebang line. If a script doesn't start with this, then it may be executed by the current shell. But that means that if someone who uses your script is running a different shell than you do, the script may behave differently. Also, it means the script can't be run directly from a program (e.g. the C exec() system call, or find -exec), it has to be run from a shell.
You might be interested in an early description by Dennis M Ritchie (dmr) who invented the #! :
From uucp Thu Jan 10 01:37:58 1980
.>From dmr Thu Jan 10 04:25:49 1980 remote from research
The system has been changed so that if a file
being executed begins with the magic characters #! , the rest of the
line is understood to be the name of an interpreter for the executed
file. Previously (and in fact still) the shell did much of this job;
it automatically executed itself on a text file with executable mode
when the text file's name was typed as a command. Putting the facility
into the system gives the following benefits.
1) It makes shell scripts more like real executable files, because
they can be the subject of 'exec.'
2) If you do a 'ps' while such a command is running, its real name
appears instead of 'sh'. Likewise, accounting is done on the basis of
the real name.
3) Shell scripts can be set-user-ID.
4) It is simpler to have alternate shells available; e.g. if you like
the Berkeley csh there is no question about which shell is to
interpret a file.
5) It will allow other interpreters to fit in more smoothly.
To take advantage of this wonderful opportunity, put
#! /bin/sh
at the left margin of the first line of your shell scripts. Blanks
after ! are OK. Use a complete pathname (no search is done). At the
moment the whole line is restricted to 16 characters but this limit
will be raised.
Hope this helps
If you write bash scripts, i.e. non portable scripts containing bashisms, you should keep using the #!/bin/bash shebang just to be sure the correct interpreter is used. You should not replace the shebang by #!/bin/sh as bash will run in POSIX mode so some of your scripts might behave differently.
If you write portable scripts, i.e. scripts only using POSIX utilities and their supported options, you might keep using #!/bin/sh on your system (i.e. one where /bin/sh is a POSIX shell).
It you write stricly conforming POSIX scripts to be distributed in various platforms and you are sure they will only be launched from a POSIX conforming system, you might and probably should remove the shebang as stated in the POSIX standard:
As it stands, a strictly conforming application must not use "#!" as the first two characters of the file.
The rationale is the POSIX standard doesn't mandate /bin/sh to be the POSIX compliant shell so there is no portable way to specify its path in a shebang. In this third case, to be able to use the 'find -exec' syntax on systems unable to run a shebangless still executable script, you can simply specify the interpreter in the find command itself, eg:
find /tmp -name "*.foo" -exec sh -c 'myscript "$#"' sh {} +
Here, as sh is specified without a path, the POSIX shell will be run.
The header is useful since it specifies which shell to use when running the script. For example, #!/bin/zsh would change the shell to zsh instead of bash, where you can use different commands.
For example, this page specifies the following:
Using #!/bin/sh, the default Bourne shell in most commercial variants
of UNIX, makes the script portable to non-Linux machines, though you
sacrifice Bash-specific features ...
TL;DR: always in scripts; please not in source'd scripts
Always in your parent
FYI: POSIX compliant is #!/bin/bash, not #!/bin/sh
You want to clarify this so that nothing else overrides the interpreter your script is made for.
You don't want a user at the terminal using zsh to have trouble if your script was written for POSIX bash scripts.
You don't want to run source in your #!/bin/bash unrecognized by #!/bin/sh, someone in an sh terminal have it break the script because it is expecting the simple/POSIX . for including source'd files
You don't want e.g. zsh features - not available in other interpreters - to make their way into your bash code. So, put #!/bin/bash in all your script headers. Then, any of your zsh habits in your script will break so you know to remove them before your roll-out.
It's probably best, especially so POSIX-compliant scripts don't break in a terminal like zsh.
Not expected for included source scripts
FYI: POSIX compliant for sourcing text in a BASH script is ., not source
You can use either for sourcing, but I'll do POSIX.
Standard "shebanging" for all scripting:
parent.sh:
#!/bin/bash
echo "My script here"
. sourced.sh # child/source script, below
sourced.sh:
echo "I am a sourced child script"
But, you are allowed to do this...
sourced.sh: (optional)
#!/bin/bash
echo "I am a sourced child script"
There, the #!/bin/bash "shebang" will be ignored. The main reason I would use it is for syntax highlighting in my text editor. However, in the "proper" scripting world, it is expected that your rolled-out source'd script will not contain the shebang.
In addition to what the others said, the shebang also enables syntax highlighting in some text editors, for example vim.
$SHELL and #!/bin/bash or #!/bin/sh are different.
To start, #!/bin/sh is a symlink to /bin/bash on most Linux systems (on Ubuntu it is now /bin/dash)
But on whether to start with /bin/sh or /bin/bash:
Bash and sh are two different shells. Basically bash is sh, with more
features and better syntax. Most commands work the same, but they are
different.
Just assume if you're writing a bash script, stick with /bin/bash and not /sh because problems can arise.
$SHELL does not necessarily reflect the currently running shell.
Instead, $SHELL is the user's preferred shell, which is typically the
one set in /etc/passwd. If you start a different shell after logging
in, you can not necessarily expect $SHELL to match the current shell
anymore.
This is mine for example, but it could also be /root:/bin/dash or /root:/bin/sh depending on which shell you have input in passwd. So to avoid any problems, keep the passwd file at /bin/bash and then using $SHELL vs. #!/bin/bash wouldn't matter as much.
root#kali:~/Desktop# cat /etc/passwd
root:x:0:0:root:/root:/bin/bash
Sources:
http://shebang.mintern.net/bourne-is-not-bash-or-read-echo-and-backslash/
https://unix.stackexchange.com/questions/43499/difference-between-echo-shell-and-which-bash
http://man.cx/sh
http://man.cx/bash
I make a complex and long line command to successful login in a site. If I execute it in Console it work. But if I copy and paste the same line in a bash script it not work.
I tried a lot of thing, but accidentally discovery that if I NOT use the line
#!/bin/sh
it work! Why this happens in my mac OSX Lion? What this config line do in a bash script?
A bash script that is run via /bin/sh runs in sh compatibility mode, which means that many bash-specific features (herestrings, process substitution, etc.) will not work.
sh-4.2$ cat < <(echo 123)
sh: syntax error near unexpected token `<'
If you want to be able to use full bash syntax, use #!/bin/bash as your shebang line.
"#!/bin/sh" is a common idiom to insure that the correct interpreter is used to run the script. Here, "sh" is the "Bourne Shell". A good, standard "least common denominator" for shell scripts.
In your case, however, "#!/bin/sh" seems to be the wrong interpreter.
Here's a bit more info:
http://www.unix.com/answers-frequently-asked-questions/7077-what-does-usr-bin-ksh-mean.html
Originally, we only had one shell on unix. When you asked to run a
command, the shell would attempt to invoke one of the exec() system
calls on it. It the command was an executable, the exec would succeed
and the command would run. If the exec() failed, the shell would not
give up, instead it would try to interpet the command file as if it
were a shell script.
Then unix got more shells and the situation became confused. Most
folks would write scripts in one shell and type commands in another.
And each shell had differing rules for feeding scripts to an
interpreter.
This is when the "#! /" trick was invented. The idea was to let the
kernel's exec() system calls succeed with shell scripts. When the
kernel tries to exec() a file, it looks at the first 4 bytes which
represent an integer called a magic number. This tells the kernel if
it should try to run the file or not. So "#! /" was added to magic
numbers that the kernel knows and it was extended to actually be able
to run shell scripts by itself. But some people could not type "#! /",
they kept leaving the space out. So the kernel was exended a bit again
to allow "#!/" to work as a special 3 byte magic number.
So #! /usr/bin/ksh and
#!/usr/bin/ksh now mean the same thing. I always use the former since at least some kernels might still exist that don't understand the
latter.
And note that the first line is a signal to the kernel, and not to the
shell. What happens now is that when shells try to run scripts via
exec() they just succeed. And we never stumble on their various
fallback schemes.
The very first line of the script can be used to select which script interpreter to use.
With
#!/bin/bash
You are telling the shell to invoke /bin/bash interpreter to execute your script.
Assure that there are not spaces or empty lines before #!/bin/bash or it will not work.
Why do all script files start with
#!/bin/sh
or with
#!/bin/csh
Is that required? What's the purpose of this? And what's the difference between the two?
This is known as a Shebang:
http://en.wikipedia.org/wiki/Shebang_(Unix)
#!interpreter [optional-arg]
A shebang is only relevant when a script has the execute permission (e.g. chmod u+x script.sh).
When a shell executes the script it will use the specified interpreter.
Example:
#!/bin/bash
# file: foo.sh
echo 1
$ chmod u+x foo.sh
$ ./foo.sh
1
The #! line tells the kernel (specifically, the implementation of the execve system call) that this program is written in an interpreted language; the absolute pathname that follows identifies the interpreter. Programs compiled to machine code begin with a different byte sequence -- on most modern Unixes, 7f 45 4c 46 (^?ELF) that identifies them as such.
You can put an absolute path to any program you want after the #!, as long as that program is not itself a #! script. The kernel rewrites an invocation of
./script arg1 arg2 arg3 ...
where ./script starts with, say, #! /usr/bin/perl, as if the command line had actually been
/usr/bin/perl ./script arg1 arg2 arg3
Or, as you have seen, you can use #! /bin/sh to write a script intended to be interpreted by sh.
The #! line is only processed if you directly invoke the script (./script on the command line); the file must also be executable (chmod +x script). If you do sh ./script the #! line is not necessary (and will be ignored if present), and the file does not have to be executable. The point of the feature is to allow you to directly invoke interpreted-language programs without having to know what language they are written in. (Do grep '^#!' /usr/bin/* -- you will discover that a great many stock programs are in fact using this feature.)
Here are some rules for using this feature:
The #! must be the very first two bytes in the file. In particular, the file must be in an ASCII-compatible encoding (e.g. UTF-8 will work, but UTF-16 won't) and must not start with a "byte order mark", or the kernel will not recognize it as a #! script.
The path after #! must be an absolute path (starts with /). It cannot contain space, tab, or newline characters.
It is good style, but not required, to put a space between the #! and the /. Do not put more than one space there.
You cannot put shell variables on the #! line, they will not be expanded.
You can put one command-line argument after the absolute path, separated from it by a single space. Like the absolute path, this argument cannot contain space, tab, or newline characters. Sometimes this is necessary to get things to work (#! /usr/bin/awk -f), sometimes it's just useful (#! /usr/bin/perl -Tw). Unfortunately, you cannot put two or more arguments after the absolute path.
Some people will tell you to use #! /usr/bin/env interpreter instead of #! /absolute/path/to/interpreter. This is almost always a mistake. It makes your program's behavior depend on the $PATH variable of the user who invokes the script. And not all systems have env in the first place.
Programs that need setuid or setgid privileges can't use #!; they have to be compiled to machine code. (If you don't know what setuid is, don't worry about this.)
Regarding csh, it relates to sh roughly as Nutrimat Advanced Tea Substitute does to tea. It has (or rather had; modern implementations of sh have caught up) a number of advantages over sh for interactive usage, but using it (or its descendant tcsh) for scripting is almost always a mistake. If you're new to shell scripting in general, I strongly recommend you ignore it and focus on sh. If you are using a csh relative as your login shell, switch to bash or zsh, so that the interactive command language will be the same as the scripting language you're learning.
This defines what shell (command interpreter) you are using for interpreting/running your script. Each shell is slightly different in the way it interacts with the user and executes scripts (programs).
When you type in a command at the Unix prompt, you are interacting with the shell.
E.g., #!/bin/csh refers to the C-shell, /bin/tcsh the t-shell, /bin/bash the bash shell, etc.
You can tell which interactive shell you are using the
echo $SHELL
command, or alternatively
env | grep -i shell
You can change your command shell with the chsh command.
Each has a slightly different command set and way of assigning variables and its own set of programming constructs. For instance the if-else statement with bash looks different that the one in the C-shell.
This page might be of interest as it "translates" between bash and tcsh commands/syntax.
Using the directive in the shell script allows you to run programs using a different shell. For instance I use the tcsh shell interactively, but often run bash scripts using /bin/bash in the script file.
Aside:
This concept extends to other scripts too. For instance if you program in Python you'd put
#!/usr/bin/python
at the top of your Python program