How would one install a Ruby VM (JRuby, Ruby MRI, etc.) on a machine that doesn't have internet access?
I'd like to just drop the tar.gz file somewhere that RVM is able to see (or checks before it goes out and tries to retrieve the package itself). Any ideas?
This blog post explains that you can drop the source archive in your $HOME/.rvm/archives directory.
cp ruby-enterprise-1.8.7-2010.02.tar.gz /home/minhajuddin/.rvm/archives
rvm install ree-1.8.7
Or the docs say that you can specify the archives directory from the command line:
--archives - directory for downladed files (~/.rvm/archives/)
Related
I'm making a Ruby wrapper for a C Library that doesn't really have a system wide installation(the libxxx.a linkable library is distributed). During development, I was able to just keep this .a file in a local folder and refer to it using the C extension code. However this would be cumbersome for anyone who just wants to type gem install into their terminal. Since there is no system wide installation, I would need to execute an intermediate script that downloads the right distribution and then puts it in a generic folder within the gem directory itself.
To be clear, when someone types gem install, a tarball would get downloaded from an ftp, unpacked into the gem folder, and then gem install would proceed normally. If it helps, the C library in question is CSPICE
I have two systems that use the same command line interface written in ruby. One system is using an older version that's incompatible with the scripts we have written. We'd like to use bundler to download all the dependencies for the 2.0 on our own system, and then migrate that bundle over to the system with the older version so that we can use 2.0 there as well.
We do not have the option to run bundle install on the other system because it's not open to the internets.
So the idea is on my system:
bundle init
...write Gemfile...
bundle install
tar -czf cli2.0.tar.gz ./Gemfile ./Gemfile.lock ./.bundle ./bundle
... move cli2.0.tar.gz to the other system ...
On system B:
tar -zxf cli2.0.tar.gz
bundle exec cli2.0 version
But at this point we get an error stating that bundler couldn't find any of the gems even though they're right there under ./bundle/ruby/2.3.0/!!
It looks like they have different versions of ruby, and ruby-gems installed.
Received some help from a coworker, the gist is I was doing it all wrong.
If you want to transport gems and see consistent performance with bundler do this.
bundle install <gem>
bundle package
This creates a cache of the downloaded gems for transport.
tar -czf ./transport.tar.gz ./Gemfile ./Gemfile.lock ./vendor
On the next machine:
tar -xzf ./transport.tar.gz
bundle exec <command>
Might be worth a try to make your second Gemfile (the one without internet access) reference the gems using paths.
i.e.
gem some_gem, path: "/home/you/some_path/some_gem"
See this question for more info on that.
If you don't have internet access but can transfer over files, it might be worth transferring the source code for a new version of bundler/RubyGems as well.
I work behind a firewall and I need some gems to automate some processes at work.
Problem:
Rubygems cannot automatically download gem dependencies so I have to manually download each gem from rubygems.org and install using the local copies. As you can imagine, this could take a very long time to find each gem dependency and manually download.
Ideal Solution:
I would like to automatically download all of these gems on another computer not behind a firewall, package the entire collection into one folder (no need to install, just download .gem files), and make that folder available to myself to download at work. The file just needs to contain every .gem file including dependencies.
Notes:
location: A solution in Ruby would be ideal! Remember, I can use gems on the secondary computer to create the solution for the primary computer where I cannot download gems remotely.
attempts: I have poured over documentation at rubygems.org, google searched, and more, but cannot find a solution. I can't seem to access the downloaded .gem files, they are unpacked and installed before I have a chance to incercept the file and save them elsewhere.
Bundler has a great way to do this: bundle package.
http://bundler.io/v1.2/bundle_package.html
The package command will put all your gems in the bundle into ./vendor/cache. You can then do whatever you want with that directory, such as copying it to another machine, or checking it into version control, or torrenting it. etc.
I am trying to set up Ruby on Rails on windows. I am using the Flash Rails distribution that looks pretty good, but there is an issue with sqlite3. I found the threads telling me to install version 1.2.3, which installed fine. I'm using ruby 1.9.0, and every time I try and run a script (e.g. rake db:create) that uses the database I get an error message "no driver for sqlite3 found".
This apparently is a missing sqlite3.dll, but I have the dll in my %PATH%, and I have also tried copying it into the directory where I am running the script from, the directory where the sqlite3 ruby code lives.
Does anyone have any ideas? If possible I want all teh ruby stuff to be self contained so I can use it from a pen drive.
EDIT: To clarify, I already used gem install to install the ruby-sqlite3 gem - it is just non functional as it cannot find the sqlite3.dll (even though it is actually present in a directory on my %PATH%)
EDIT PART 2: After doing some more digging, the problem appears that ruby will not load the sqlite3_api.dll. I have copied it all over my filesystem, I just get a failure to read file. Other dll libraries in the same directory (e.g. zlib.dll) work fine!
I tried installing the dlls into system32, and that did not work either.
The problem put simply is that sqlite3-ruby 1.2.3 is not compatible with ruby 1.9. This is caused because ruby 1.9 does not use .dll files for c libraries it uses .so files instead. Additionally, since sqlite3_api.dll is written against msvcrt-ruby18.dll. This means that it specifically only will support ruby 1.8.*.
The good news is that there is a fat binary version that will support both ruby 1.8 and ruby 1.9. Uninstalling all former versions of sqlite3-ruby and then installing this one. (You may have to manually delete some versions the gem after uninstalling.) in order to install it use
install sqlite3-ruby --source http://gems.rubyinstaller.org
for more information see this website
Try installing the sqlite3-ruby gem:
gem install sqlite3-ruby
Something similar happened to me recently so I thought I'd update my answer.
For reference there's a sqlite3_api.dll file located in the gem's lib directory. Also the sqlite3.dll file needs to be reachable on the path. They are different files, the first is required by the gem to interface Ruby to C code, while the second contains the actual Sqlite implementation.
It's best to get the second file from the sqlite website and extract it to the Ruby\bin directory (as you shouldn't manually put DLL's into the windows or windows\system directories any more).
So for reference "sqlite3_api.dll" needs to be in:
Ruby\lib\ruby\gems\1.8\gems\sqlite3-ruby-1.2.3-x86-mswin32\lib
and "sqlite3.dll" needs to be on the path, possibly in:
Ruby\bin
As for the "driver not found" problem I would suggest trying the easy things first and making sure gems is installed correctly, up to date, and that the RUBYLIB and PATH environment variables are set appropriately. (System restart may be required to propagate the changes fully.)
Re this link
Download sqlitedll-3_6_10.zip and extract into ruby/bin!
Try going to sqlite.org download page and get the zipped up dll. Then put that in your c:\windows\system32 folder, that should allow Ruby to find it.
Restart your machine after running install sqlite3-ruby
To clarify, which gem are you using? sqlite-ruby or sqlite3-ruby?
They're part of the same project, but different releases. The key is that sqlite3 appears to have driver code included.
I assume you're attempting to use the first, since it's giving me the same error. If so, try switching.
Also.. How literal do you mean by this?
but I have the dll in my %PATH%
PATH=...;C:\sqlite\sqlite3.dll
PATH=...;C:\sqlite
The first will attempt to find C:\sqlite\sqlite3.dll\sqlite3.dll, AFAIK.
I use Ruby 1.8.7 (works with 1.9.1 too)
OS is WindowsXP SP3
Go to
http://www.sqlite.org/download.html
and Download file
sqlitedll-3_7_0_1.zip (265.19 KiB)
and unzip then we will get
sqlite3.dll
Copy sqlite3.dll to your bin folder
as C:\Ruby191\bin or C:\Ruby187\bin
then it works
I'm trying to install some Ruby Gems so I can use Ruby to notify me when I get twitter messages. However, after doing a gem update --system, I now get a zlib error every time I try and do a gem install of anything. below is the console output I get when trying to install ruby gems. (along with the output from gem environment).
C:\data\ruby>gem install twitter
ERROR: While executing gem ... (Zlib::BufError)
buffer error
C:\data\ruby>gem update --system
Updating RubyGems
ERROR: While executing gem ... (Zlib::BufError)
buffer error
C:\data\ruby>gem environment
RubyGems Environment:
- RUBYGEMS VERSION: 1.2.0
- RUBY VERSION: 1.8.6 (2007-03-13 patchlevel 0) [i386-mswin32]
- INSTALLATION DIRECTORY: c:/ruby/lib/ruby/gems/1.8
- RUBY EXECUTABLE: c:/ruby/bin/ruby.exe
- EXECUTABLE DIRECTORY: c:/ruby/bin
- RUBYGEMS PLATFORMS:
- ruby
- x86-mswin32-60
- GEM PATHS:
- c:/ruby/lib/ruby/gems/1.8
- GEM CONFIGURATION:
- :update_sources => true
- :verbose => true
- :benchmark => false
- :backtrace => false
- :bulk_threshold => 1000
- REMOTE SOURCES:
- http://gems.rubyforge.org/
Found it! I had the same problem on windows (it appeared suddenly without me doing an update, but whatever):
It has something to do with multiple conflicting zlib versions (I think).
In ruby/lib/ruby/1.8/i386-msvcrt, make sure that there exists a zlib.so file. In my case, it was already there. If not, you may try to install ruby-zlib.
Then go to ruby/lib/ruby/site_ruby/1.8./i386-msvcrt and delete the zlib.so file there.
In ruby/bin, there should be a zlib1.dll. For some reason my Ruby version did not use this dll. I downloaded the most recent version (1.2.3) and installed it there. I had to rename it to zlib.dll for it to be used.
And tada! Rubygems worked again.
Hope this helps.
Firstly, I thank the person, who came up with the solution to the missing zlib problem. (It wasn't me. :-)
Unfortunately I lost the link to the original posting, but the essence of the solution on Linux is to compile the Ruby while zlib header files are available to the Ruby configure script. On Debian it means that zlib development packages have to be installed before one starts to compile the Ruby.
The rest of my text here does not contain anything new and it is encouraged to omit it, if You feel comfortable at customizing Your execution environment at UNIX-like operating systems. The following is a combination of a brief intro to some basics and step by step instructions.
------The-start-of-the-HOW-TO-------------------------
If one wants to execute a program, let's say, irb, from a console, then the file named irb is searched from folders in an order that is described by an environment variable called PATH. It's possible to see the value of the PATH by typing to a bash shell (and pressing Enter key):
echo $PATH
For example, if there are 2 versions of irb in the system, one installed by the "official" package management system, let's say, yum or apt-get, to /usr/bin/irb and the other one that is compiled by the user named scoobydoo and resides in /home/scoobydoo/ourcompiledruby/bin then the question arises, which one of the two irb-s gets executed.
If one writes to the
/home/scoobydoo/.bashrc
a line like:
export PATH="/home/scoobydoo/ourcompiledruby/bin:/usr/bin"
and restarts the bash shell by closing the terminal window and opening a new one, then by typing irb to the console, the
/home/scoobydoo/ourcompiledruby/bin/irb gets executed. If one wrote
export PATH="/usr/bin:/home/scoobydoo/ourcompiledruby/bin"
to the
/home/scoobydoo/.bashrc
,then the /usr/bin/irb would get executed.
In practice one wants to write
export PATH="/home/scoobydoo/ourcompiledruby/bin:$PATH"
because this prepends all of the values that the PATH had prior to this assignment to the /home/scoobydoo/ourcompiledruby/bin. Otherwise there will be problems, because not all common tools reside in the /usr/bin and one probably wants to have multiple custom-built applications in use.
The same logic applies to libraries, except that the name of the environment variable is LD_LIBRARY_PATH
The use of the LD_LIBRARY_PATH and PATH allow ordinary users, who do not have root access or who want to experiment with not-that-trusted software, to build them and use them without needing any root privileges.
The rest of this mini-how-to assumes that we'll be building our own version of ruby and use our own version of it almost regardless of what is installed on the system by the distribution's official package management software.
1)=============================
First, one creates a few folders and set the environment variables, so that the folders are "useful".
mkdir /home/scoobydoo/ourcompiledruby
mkdir -p /home/scoobydoo/lib/our_gems
One adds the following 2 lines to the
/home/scoobydoo/.bashrc
export PATH="/home/scoobydoo/ourcompiledruby/bin:$PATH"
export GEM_HOME="/home/scoobydoo/lib/our_gems"
Restart the bash shell by closing the current terminal window and opening a new one or by typing
bash
on the command line of the currently open window.
The changes to the /home/scoobydoo/.bashrc do not have any effect on terminal windows/sessions that were started prior to the saving of the modified version of the /home/scoobydoo/.bashrc
The idea is that the /home/scoobydoo/.bashrc is executed automatically at the start of a session, even if one logs on over ssh.
2)=============================
Now one makes sure that the zlib development packages are available on the system. As of April 2011 I haven't sorted the details of it out, but
apt-get install zlibc zlib1g-dev zlib1g
seems to be sufficient on a Debian system. The idea is that both, the library file and header files, are available in the system's "official" search path. Usually apt-get and alike place the header files to the /usr/include and library files to the /usr/lib
3)=============================
Download and unpack the source tar.gz from the http://www.ruby-lang.org
./configure --prefix=/home/scoobydoo/ourcompiledruby
make
make install
4)=============================
If a console command like
which ruby
prints to the console
/home/scoobydoo/ourcompiledruby/bin/ruby
then the newly compiled version is the one that gets executed on the command
ruby --help
5)=============================
The rest of the programs, gem, irb, etc., can be properly executed by using commands like:
ruby `which gem` install rake
ruby `which irb`
It shouldn't be like that but as of April 2011 I haven't figured out any more elegant ways of doing it. If the
ruby `which gem` install rake
gives the zlib missing error again, then one should just try to figure out, how to make the zlib include files and library available to the Ruby configure script and recompile. (Sorry, currently I don't have a better solution to offer.)
May be a dirty solution might be to add the following lines to the
/home/scoobydoo/.bashrc
alias gem="`which ruby` `which gem` "
alias irb="`which ruby` `which irb` "
Actually, I usually use
alias irb="`which ruby` -KU "
but the gem should be executed without giving the ruby the "-KU" args, because otherwise there will be errors.
------The-end-of-the-HOW-TO------------------------
I just started getting this tonight as well. Googling turned up a bunch of suggestions that didn't deliver results
gem update --system
and some paste in code from jamis that is supposed to replace a function in package.rb but the original it is supposed to replace is nowhere to be found.
Reinstalling rubygems didn't help. I'm reinstalling ruby right now.........and it is fixed. Pain though.
How about cd into rubysrc/ext/zlib, then ruby extendconf.rb, then make, make install.
After do that, reinstall ruby.
I did this on ubuntu 10.04 and was successful.
A reinstall of Ruby sorted this issue out. It's not what I wanted; I wanted to know why I was getting the issue, but it's all sorted out.
It most often shows up when your download failed -- i.e. you have a corrupt gem, due to network timeout, faulty manual download, or whatever. Just try again, or download gems manually and point gem at the files.
if gem update --system not works and rename ruby/bin/zlib1.dll to zlib.dll not helps try:
Open file RUBY_DIR\lib\ruby\site_ruby\1.8\rubygems.rb
And replace existed def self.gunzip(data) by this:
def self.gunzip(data)
require 'stringio'
require 'zlib'
data = StringIO.new data
# Zlib::GzipReader.new(data).read
data.read(10) # skip the gzip header
zis = Zlib::Inflate.new(-Zlib::MAX_WBITS)
is = StringIO.new(zis.inflate(data.read))
end
Try updating ZLib before you do anything else. I had a similar problem on OS X and updating Compress::Zlib (a Perl interface to ZLib) cured it - so I think an old version of ZLib (is now 1.2.3) may be where your problem lies...
install pure ruby zlib if all else fails