I made a custom http server using java. It runs properly on XP machines and when I open connection to that server from a different machine using its IP address and port it used to work. But in windows 7 it is not working. When I see the firewall it shows several rules. It would be great if someone lets me know which rule I should enable to allow incoming connections.
Regards,
Lalith
Please go through http://windows.microsoft.com/en-US/windows7/Allow-a-program-to-communicate-through-Windows-Firewall
Related
I am trying to run ftp client and server.
The connection successful only if both server and client windows firewall is turned off.
I tried to turn the firewall on and allow roll for:
1. (inbound and outbound) tcp port 20-21 allow
2. allow end point communication for server-client
However, my problem still not solved.
Anyone has any other ideas?
Thanks ahead
Fixed it. The server throw an exception. I found it when i created log file on both server and client side
I've created a simple client/server program with the help of winsock in vb6. It perfectly works on LAN but the problem is it doesn't work on WAN. All ports are already open, Firewall is already Off, I have dynamic IP so I used No-ip to get named IP address.
One more think I want to ask is , is it important to open port on both client and server? For eg- I've created the program on port 50505 and on the client computer the port is open but is it important to open 50505 on server also??
Here is my project.
If anyone could find the problem please let me know. I would appreciate a lot
Okay, first make sure that in the client side program that the Localport is not set to anything because Windows will assign it one, but the RemotePort is set to 50505. On the server side, the RemotePort is set to nothing, and the LocalPort is set to 50505.
Next you need to make sure your server has a static IP on your network.
So if your router's LAN IP is 192.168.1.1 you need to set your server's to
something like 192.168.1.50, just make sure that it doesn't get put in the range or the
DHCP server (That's the server that gives each computer a IP address from the router).
Next you need to setup your router for "Port forwarding". Be default your router had no idea what to do with data that the internet sends to it. You have to setup the router to forward any data from port 50505 to your server on your network.
While this seams really long and drawn out, it shouldn't take more than 5-10 min's to setup.
Good luck!
You need to configure the router that the server is behind to forward connections on that port to the computer running the server.
Otherwise, the client will not be able to connect to the server.
I am trying to find somw Windows based tools that can help me validate TCP and UDP connection on remote machines.
My Problem (just one use case):
At work, I manage many clustered servers that I run load tests against. In order to get a rich test, I use Jmeter-Plugins which provides a Server agent that opens a TCP socket on port 4444 on a target remote machine: http://code.google.com/p/jmeter-plugins/wiki/PerfMonAgent
There are many times when I setup a new load test farm, that either the network, or the server configuration, or the ServerAgent itself can have issues and thus not allowing a Load test client to access that TCP connection.
The issue I have is that I dont know what part of the system is broken.
What I think I need:
I would like to know how I can open a TCP (not HTTP with cUrl), connection to a remote server to validate that the network allows the connection, as well as the Server firewall allows the given TCP connection to be accessed remotely.
What I have looked:
These are some of the tools I have looked at so far:
Nmap http://nmap.org
Ncat http://sourceforge.net/projects/nmap-ncat/
TCP/IP Builder http://www.drk.com.ar
Zenmap 6.01 and nmap might do the job I want, but some machines where not accessible to Zenmap when I know 100% that the server was accessible via HTTP, so that was strange.
I have looked at many tools and either they:
Dont allow remote connections
Dont seem to want to connect to a TCP socket
Or I dont understand the tools to accomplish the validation I stated above.
I would greatly appreciate all comment and suggestions to help with this re-occurring problem I face.
Mick,
Firebind.com can do what you'd like to do. Firebind is an Internet based server that can listen on any of the 65535 UDP or TCP ports. It uses a java based client to send traffic to and from the server from your machine.
Carl
www.firebind.com
One of my real weak points in programming is networking, so I admit that I may be a little over my head with this project. Please feel free to tell me if what I'm trying to do doesn't make any sense
What I am trying to do, basically, is run a program on my laptop (Node.JS, probably) that handles requests from a website, does some functions, and serves data back to a client running on the website. (Research tells me this is called an RPC server)
When you listen for requests in Node.JS, you specify a port and optionally an IP Address- localhost, 127.0.0.1, is what all the tutorials I've read have used, but that's not sufficient for what I'm trying to do
I've read that I'll need to set up a static IP Address? But I think those are relative to my LAN, so they'll be like 192.168.0.X. So then what would I specify for the IP for the server and the client? (I don't think the port particularly matters). Do I need a DNS?
I hope this makes sense, sorry for so many questions, thank you for your help
You can run a server on your local machine, and you will specify your local IP address for the script, like 192.168.0.x. But for this server to ever receive a connection, your client must connect to your external IP address. It is the IP address that you get from your Internet provider when you connect to Internet. If your external IP is static, i.e. it does not change, then you can use it in your client script. If the external IP changes, you must setup a DNS record that would resolve the name of your computer. DynDNS can be used for that purpose.
If you have a router, it must be setup so that it forwards connections to your laptop where the server runs. And your firewall must be configured to allow connections.
alt text http://img440.imageshack.us/img440/6950/problemyd1.png
(The curly lines with dots represent a network route.)
Having a process called "foo.exe", is there a way to forward everything it communicates over TCP/IP to a forwarding proxy located elsewhere? This forwarding should not reflect to other processes.
Another question: if there are multiple network adapters, is it possible to force a process to use one specific adapter.
Since in this example the targethost.com is known, I could just edit "system32\drivers\etc\hosts" to map targethost.com's IP to localhost, where on port 8765 would be the first forwarder waiting for an incoming connection and pass everything forward to proxy.foo.com. I was wondering if there's a more elegant way of doing this.
This is not for malware, I'm doing some network testing with my complex home network. Thank you for warning us.
Some free software for this would be perfect, alternatively a code idea (native or .net). Thank you very much.
It's not too hard if you make your own computer a firewall, then your app connects to a port on your own computer, and that port is forwarded to both the original destination and logged or forwarded on to your spying computer.
Alternatively you can make your other computer the firwall and have it log/forward the info.
Finally you could use a sniffer.
SocksCap will probably do the job (if you're OK with establishing a SOCKS proxy at proxy.foo.com).
You could hook into the TCP stack, for example, by using the Windows Filtering Platform or its predecessors, or you could substitute the network libraries/calls of that particular process.