So I see two solutions to my current problem, but I was wondering what the pros and cons are, or if there is a defacto best practices approach.
So my current project has a number of configuration files, help files, and other external content. I need this content local to run and debug the application. Currently we duplicate this content in a standard windows installer project. This clearly is a bad idea. We are moving to a new setup that uses the WiX installer, and I'm currently setting the project up next to the code project and trying to figure the best way to share resources. I see two solutions.
One is that I can put all the resources in the WiX project and then add them as links in the code project. This way I know what I'm debugging is installer.
The other option would be to leave the content in the code project and path into it in the installer using the reference variables.
Right now it seems 6 one way, half dozen the other. Any persuasive arguments for either method?
Assuming that these configuration and help files are going to be installed in the same directory as the executables then definitely put them in the code project, mark them as Content, and add a reference to the code project to the installer project. If you're using WiX 3.5 the files will be automatically included in the installer along with the executables, which makes writing simple installers much easier.
For earlier versions of WiX or more complex deployment scenarios (where the content files could be going into different directories) you would still put them in the code project but then you'd use File elements with a relative path or reference variable in the Source attribute to include the the content files from the code project directory.
I don't believe that putting the content files in the WiX installer project directory instead of the code project directory will do anything to ensure that the version you use to debug will be the same as the version installed. That can only be ensured by thinking through the process of how your application finds these content files and making sure the right versions are found.
So going back to the simple case where the content is in the code project and marked as Content, and it will be installed and loaded from the same directory as the executables, then it is only a matter of setting "Copy to Output Directory" to "Copy always" or "Copy if newer" and then you can be sure the versions used in debugging and the version installed will match.
Related
I've got a solution in which I'm trying to create a 2nd executable. These two executable share most of the same files, but have a few different ones including resources and application icon, etc.
I created the 2nd project, and added the items as links.:
Right-click "Add existing item",
Browse to it,
Click the "Add" drop-down and select "Add as link".
Adding as links means that it just references the other file in the other folder and does not copy it.
Now, when I tried to commit my project VisualSVN / SVN tried to do an SVN add on those files in the logical path they belong to resulting in lots of errors that the file was not found. It caused the entire commit to fail and was a major pain in the ass.
Is there a good way I can add links to files without side-effects? All the files I'm trying to link to are already in the same repo.
Update
Maybe I should add more information about what I'm trying to accomplish because I'm open to any suggestion which helps me accomplish it.
I have a project structure something like this... Or I want it to be like this...
MyProject
/Common
BusinessDataObjects (svn:external)
ControlsLibrary (svn:external)
OtherCommmonLib1 (svn:external)
OtherCommonLib2 (svn:external)
/Modules
Module1
Module2
Module3
...
Application1
Application2 (shares all App1's files, except different .resx, icon, name, other minor differences)
SetupProject1 (includes app1 and certain module dlls)
SetupProject2 (includes app2 and certain module dlls)
The application is basically an empty shell (using Prism) which loads the modules installed in a /modules folder. I want both applications to be almost identical, but I want them to have different names and a different icon. I thought I could accomplish this by adding the files from the first project to the second as a link, and simply swapping a resource file which included the strings for the application window title, About dialog, etc. But then VisualSVN or whatever tried to SVN Add those items which I wasn't expecting.
I need to be able to develop the modules and the application's shell project. They are not stable in any way yet. I just want them to near copies of each other but with minor naming differences. I figured with two application projects, I could have two setup projects that included the output from each application and whichever modules are supposed to be included in that version of the software program.
I was trying to make this as foolproof as possible, and I'd like to avoid having to update external references to the same project. (I'm a bit confused about that as well, would I svn:external to the same repo?) That doesn't sound good, but this was my main idea on how to create two almost identical apps. I'm not sure how else I'll do it if I can't get my version control software to behave.
I had suggested oringally we only have one version of the software and have certain modules be upgrades, but there are some good reasons they can't really do that.
When you add a file to a Visual Studio project with "Add as link" it's expected that the file is not copied to the project's folder.
VisualSVN considers status of items in your working copy, even files which are not included in the current solution. However a linked file does not exist in a working copy, thus can't be tracked. It's out of version-control.
Since the files you attempt to link are already version-controlled (i.e. they exist in the SVN repository) it makes sense to use Externals Definitions (svn:externals property) to link them.
Also see TortoiseSVN Manual; it's description of svn:externals is really good.
You don't mention your environment. However, you mention you have a Solution. I'm assuming it's VisualStudio you're using.
Have you tried AnkhSVN which is a Source Control Provider for Subversion for VisualStudio? AnknSVN integrates into VisualStudio much like Microsoft's native version control systems of Visual SourceSafe and TeamFoundation. I believe you can use AnknSVN to do the linking you want since these links are really internal VisualStudio structures and not actual symbolic or hard links like you find in a Unix system.
I usually avoid links (I believe they're called Junctions on Windows) because they simply don't work across operating systems. Instead, you can use one of the following methods:
Use your build system to copy the files, or create the required links rather than your version control system.
Use svn:externals to do the linking. Careful with this because svn:externals are pointers to a Subversion URL.
For example, if I setup http://foo.com/svn/trunk/proj1 to have a svn:externals link to the head of http://foo.com/svn/trunk/proj2, and I create a tag for Project 1 by copying http://foo.com/svn/trunk/proj1 to http://foo.com/svn/tags/REL-1.2/proj1, that project is still pointing to the head of the trunk of proj2. Changes in Project 2 will change what I thought was a stable tag. Always point your svn:external to a stable revision.
I have no experience with VisualSVN, we use Ankhsvn which does not have that problem.
http://ankhsvn.open.collab.net/
I could use some advice.
I'm in the process of adopting subversion, and I'm trying to put some existing Visual Studio 2010 projects into a repository. I have the current version of AhnkSvn.
The projects I have are organised as;
VS2010_projects\Project_A
VS2010_projects\Project_B
VS2010_projects\Project_C
VS2010_projects\Common_code
Where Project_A, Project_B and Project_C may all refer to one or more files in "Common_Code"
In visual studio, these files will have been added using "add as link".
There is no actual project in "Common_code" just a collection of useful code files, which we're likely to re-use in different projects.
(If we have a module or class which is re-used in various projects, then we often keep a single master copy in 'common-code', and link to it.)
Visual Studio has no problem with this.
When I add any of the actual projects to subversion, all of their own files are added just fine, but the linked files are ignored.
(And as a consequence, if I then get a working copy of those files, then it's just the project files which get handled, I won't get a copy of the linked files.)
If I right click on any of the linked files, I the only subversion options I get are to refresh their status or to select the working folder.
I was wondering what the correct way to handle this situation was ?
Any advice would be much appreciated
Thanks !
Robert
if I understand your question correctly then I think SVN is acting in the desired way. A linked file is merely a reference to another file. That reference exists only in the .csproj file which is checked in. It would not make sense to have two copies of the same file in source control, and it could lead to versioning issues. The first time you checkout your repository doing a build on your projects should copy the files from Common_code to the places that they're linked.
As an aside we've had alot of random issues with .csproj linked files and SVN, and so try to avoid linked files where possible. A better way to re-use files across projects is obviously just to embed them in a library and then reference that library. This should work fine with the exception of certain files like Javascript/CSS.
Also you may want to check out SVN externals, a workmate mentioned this can be used to share common libraries between multiple projects, although as a disclaimer I haven't tried this myself and can't comment on the merits or drawbacks of the approach.
Thanks for the advice, I actually did something similar to your suggestion.
I didn't want to make a full blown library, but I did make up a dummy project, and put my shared files into that.
Then I added the dummy project to the repository.
AhnkSvn now seems to be satisfied that the linked files are under subversion control, and seems to handle them just fine.
(I haven't added any reference to the dummy project to my existing projects - they just use the linked files as before - but now AhnkSvn shows me their status, and allows me to get the latest version, and commit changes.)
I can see the case for having a proper library - but that would have meant modifying a large body of existing projects. This approach lets me get up and running with Subversion without requiring those changes first.
In the main project of my VS Solution I have a Resources folder with some required external tools. When building and publishing the solution, I get a .\Resources* with all required files there.
So far so good.
However I have to move some files to the parent directory.
My first attempt was do so with the Post Build Events. It works and does move them the correct folder.
Nevertheless in the publish output they still appear in the Resources folder and I need them in the parent one :/
Is there any way to setup the target output path for resources in Visual Studio?
After some research and experimental, I solved my problem.
Still, here's what I learned in the process.
The first attempt was adding the file to the project root and mark it as a resource. After publishing it worked. But having those files in the project root its lame.
Since I needed some *.exe files compiled in another VS solution, added them as a project reference. Gave it a try and it passed the "Publish" test. But still.. not the best way to do it.
After that, with some scripting and a post-build event, I copied the required files to the correct folder. Works.. but after publishing, they don't appear in the package.
However, there is still a possibility with the Mage tool:
http://msdn.microsoft.com/en-us/library/acz3y3te.aspx
This lead to some promissing experiments, however they ended up helping me realize how limited the MS ClickOnce is, so I decided to try other tools.
Here's a good start to follow:
What alternatives are there to ClickOnce?
I had a similar situation once. I found it became more trouble than it was worth to customize output paths and such in Visual Studio, to the extent that I wanted.
I ended up letting Visual Studio do its own thing with regards to file/project structure, and wrote a post-build script to copy everything that was needed into a final, 'publish-ready' directory.
I then set the execution target in Visual Studio to the new location, so I could run/debug as normal, but with the new folder that was organized how I needed it. Careful, I think this is a user project setting; so other developers will need to do this on their machines too, if they so desire.
I do recall changing some output paths and such to make the post-build script more simple. But changing things like that can lead to annoyances when you add new projects to the solution; you might need to configure them to match. It's all a trade-off :)
Two ideas:
Maybe you could move your resources into another project - a project just for resources - and then set their Build Action to Content and Copy To Output to true. Then reference this new project and build the solution. (This may not work as you want, just an idea).
Why not make your resources embedded resources instead. Keep them all within the Resources\ directory and access them programatically?
I have a couple of different solutions, in which some projects may depend on output from projects in other solutions. To manage this, I've been copying dll files from the /bin/ folder in each project to a shared library location after build, and then copy/reference them from there to the dependent project.
However, as the library solution gets larger, this tends to become unmaintainable. Too much of my time is being spent traversing solution directories in Windows Explorer looking for /bin/ folders, and trying to figure out which one, or which ones, of the dll files from each one I need.
Is there any way to give Visual Studio a hint that I want all projects in a solution to have the same output directory? For example, a /bin/ folder directly under the solution folder, where all projects put their output.
If possible, I'd like to achieve this without hard-coded post-build events that copy the files, since that will fail if a project output changes file name, or adds another file. I'd rather like to change the location of the actual output directory - the location of $(OutDir), if you will.
I know you said you don't want to use post build events, but your reason as to why not intrigued me. It sounds like you might be hard coding the name of the .dll in your post build event. That can easily be avoided.
xcopy "$(TargetDir)*" "c:\common\" /Y
The * would just cause everything in your bin/Debug/ folder to get copied to your common folder. You could also just copy dlls if you want. Or, if you use $(TargetPath), you'll copy just the 1 dll that is the result of the project, and not any other related dependencies.
UPDATE
The way we do it is each projects entire bin folder is copied to a subfolder. Suppose you have 2 projects, WebUtil and HtmlParser, where WebUtil depends on HtmlParser. For both projects, use xcopy "$(TargetDir)*" "c:\common\$(ProjectName)" /Y. This will create c:\common\WebUtil\ and c:\common\HtmlParser. In WebUtil, add a reference to c:\common\HtmlParser\HtmlParser.dll. There will now be 2 copies of HtmlParser.dll in c:\common.
c:\common\HtmlParser\HtmlParser.dll // the most recent build.
c:\common\WebUtil\HtmlParser // what was the most recent build when WebUtil was built
This has all kinds of advantages. If you change the API of HtmlParser, WebUtil will continue to work, since it will have the older HtmlParser.dll until you try to rebuild WebUtil (at which point you'll get build errors because of the changed API).
Now, if a 3rd project got in the mix that depended on WebUtil, and you're using some part of WebUtil that exposes classes in HtmlParser, then you'll need to add a reference to both projects from your new project. When you add a reference to HtmlParser.dll, use the one in c:\common\WebUtil. You do this because you're only including it as a necessary requirement of WebUtil. Now you'll always have the version of HtmlParser.dll that matches your current version of WebUtil.dll.
I hope that makes sense. It can definitely be a tricky thing to manage. Just wait till you have to start pulling down all your dependencies using svn:externals =P
You can set the output directory in each project properties.
Right click on the project, select Properties
For C#, it is one of the Build property page, under Output, Output directory.
In VB.Net projects, it is on the Compile tab, in the textbox at the top.
I am writing a small application at the moment and am trying to organise my build output to be a little closer to the finished product. The application is made up of a number of different projects. There is a core library that contains most of the functionality, a GUI app and a command line app that both reference the Core Dll, and a number of Plugin Dlls that are loaded at runtime and implement different data sources, these all reference core.dll, these also may include some other third party dlls. There are also a number of peripheral files such as a readme. And finally the core.dll and the datasource plugins are unit tested.
I would like to configure my build so that everything is output into directories as I would expect it to be when installed. I want debug and release builds to be built into different directories but otherwise have the same directory structure. I only want tests to be built for debug builds, and want them to be runnable, but seperated (I guess all test dlls would get output into a seperate directory). Here is how I imagine the structure will be.
Code/
solutions etc here
Debug/
Project.Core.dll
Project.Gui.exe
Project.Cli.exe
readme.txt
lib/
ThirdParty1.dll
ThirdParty2.dll
DataSource/
DataSource1.dll
DataSource2.dll
Tests/
Project.Core.Tests.dll
DataSource1.Tests.dll
Release/
same as Debug but without tests.
Is there any way of getting a solution to build like this? I'm beginning to think it will be difficult to build the plugins and the app all from one solution, and probably not even wise, but as they will all be distributed together it would be nice. I am open to using Nant or another build tool if that will make it simpler.
It is possible. Just modify OutputPath tag manually in each .csproj in both Debug and Release file to something like this
<OutputPath>..\$(Configuration)\any_subdirs</OutputPath>
You can disable tests building for Release using Configuration manager.
Modifying each project every time you create a new one is annoying.
Here's the solution:
Locate the real vs project, it'll be somewhere under ("%programfiles(x86)%\Microsoft Visual Studio 10.0\Common7\IDE\ProjectTemplates*")
Copy it locally somewhere.
Extract it.
Edit the contents making changes that better suit your project layout style. Make sure you update the project name, the name is what you see when looking for the project in the new project dialogue box. It's xml tag is Name, you'll find it in the {something}.vstemplate file.
Compress the content again. (Note: the contents must NOT be in a sub folder, so /* and NOT /{somefolder}/*).
Place your custom project under ("%USERPROFILE%\Documents\Visual Studio 2010\Templates\ProjectTemplates*").
Add a new project is Visual Studio, selecting your custom one, and enjoy!