I've been trying to solve this problem for about a week now. I posted this question on Microsoft website and only received one reply, which did not solve my issue. The following is a combination of my posts on Microsoft website.
I installed and configured TFS 2010 on Window 7 PC 64-bit. When I navigate to http://localhost:8080/tfs in my browser, I get
Service Unavailable – HTTP Error 503. The service is unavailable.
Any help to solve this problem would be greatly appreciated.
Based on previous reading, I have done much work to figure this out. Following are the steps I have gone through to solve this issues. The list is fairly long, but I want to make sure all the information that may be pertinent to solving this problem is available.
I have uninstalled and reinstalled TFS many times
The application pool "Microsoft Team Foundation Server Application Pool" is running
The application pool "Microsoft Team Foundation Server Web Access Application Pool" is running
Other website in IIS that point to the "ASP.NET v4.0" app pool seem to run fine.
If I point my other sites to "Microsoft Team Foundation Server Application Pool" they
seems to run fine
The Windows user "TFS" is in the following rolls: Administrator, IIS_IUSRS, - TFS_APPTIER_SERVICE_WPG, Users
I'm able to run SQL Server Management Studio (SSMS) as the user "TFS" and access the databases "Tfs_Configuration" and "Tfs_DefaultCollection"
I have confirm the account for "TFS" is not disabled or expired
For IIS application "Team Foundation Server", I Configured "Failed Request Tracing Rules" to log status codes 401.3-999
After IIS Reset and browser refresh, no files in the "FailedReqLogFiles" directory
No log information in IIS Logs
In Team Foundation Server Administration Console, I can change account info(Update Password, Change Account, Reapply Account).
In Team Foundation Server Administration Console, when I try to changing Group Membership or Administer Security I get the error "Team Foundation services are not available from server http://localhost:8080/tfs. Technical information (for administrator): HTTP code 503: Service Unavailable"
In Event Viewer, I do not see anything that may be of value
In Sql Server Configuration Manager, confirmed "SQL Native Client 10.0 Configuration - (32bit)", "SQL Server Network Configuration", and "SQL Native Client 10 Configuration" all have the following protocols enabled (Shared Memory, TCP/IP, and Named Pipes"
In IE confirmed that that Proxy server is not enable.
I installed Team Foundation Server 2010 Power Tools. The following are the Critical Issues returned by the tool
Accessing "AuthorizationService" Web service at "/DefaultCollection/Services/v3.0/AuthorizationService3.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
Accessing "BuildService" Web service at "/DefaultCollection/Build/v3.0/BuildService.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The Web service call "CommonStructureService.ListAllProjects" at "/Services/v1.0/CommonStructureService.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable."
Accessing "GroupSecurityService" Web service at "/DefaultCollection/Services/v1.0/GroupSecurityService.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
Accessing "IdentityManagementService" Web service at "/DefaultCollection/Services/v3.0/IdentityManagementService.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The Web service call "Integration Services ProcessTemplate.GetTemplateName" at http://MyServer:8080/tfs/DefaultCollection/Services/v1.0/ProcessTemplate.asmx failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
Accessing "LabService" Web service at "/DefaultCollection/Lab/v3.0/LabService.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The Web service call "ProcessTemplate.TemplateHeaders" at "/Services/v1.0/ProcessTemplate.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable."
Accessing "Repository" Web service at "/DefaultCollection/VersionControl/v1.0/repository.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
Accessing "SecurityService" Web service at "/DefaultCollection/Services/v3.0/SecurityService.asmx" failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The Web service call "TeamProjectCollection.GetDefaultCollectionId" at http://MyServer:8080/tfs/TeamFoundation/Administration/v3.0/TeamProjectCollectionService.asmx failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The Web service call "VersionControl.Administration.QueryRepositoryInformation" at http://MyServer:8080/tfs/DefaultCollection/VersionControl/v1.0/administration.asmx failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The Web service call "VersionControl.Administration.QueryRepositoryInformation" at http://MyServer:8080/tfs/DefaultCollection/VersionControl/v1.0/administration.asmx failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The Web service call "ConfigurationSettings.ServiceGetWorkitemTrackingVersion" at http://MyServer:8080/tfs/DefaultCollection/WorkItemTracking/v1.0/ConfigurationSettingsService.asmx failed. Error message: "The remote server returned an error: (503) Server Unavailable.".
The follow are additional issues that were not critical:
SharePoint Products is not installed or integrated with Team Foundation Server.
Team Foundation Server is not configured to use the data warehouse.
Team Foundation Server is not configured to use Report Manager.
Results for rules that require access to Team Foundation Build cannot be included in the report.
Cannot validate the configuration of Visual Studio Lab Management. Results for rules that check the health of Visual Studio Lab Management will not be included in the report.
Paged pool memory on MyServer is over the warning threshold of 180 MB. This may not be a problem if a backup is currently in progress. Current value: 490 MB.
The follow are Information Items:
Computer: MyServer. Manufacturer: System manufacturer. Model: System Product Name.
The application tier connected to Team Foundation Server at 12/2/2010 9:09:49 PM.
The connection string in config file c:\Program Files\Microsoft Team Foundation Server 2010\Application Tier\Web ervices\Web.config on MyServer is: Data Source=MyServer;Initial Catalog=Tfs_Configuration;Integrated Security=True;.
The connection string stored in the Team Foundation Server registry is: Data Source=MyServer;Initial atalog=Tfs_Configuration;Integrated Security=True.
Logical disk C: on MyServer is 500 GB in size.
No Sharepoint Site is configured for this Team Project Collection "DefaultCollection".
No Sharepoint Site is configured for this Team Project Collection "DefaultCollection".
The MyServer is running the 64-bit version of Windows.
The SQL Server (MSSQLSERVER) service on MyServer is configured to run as user NT AUTHORITY\NETWORK SERVICE.
The account Identity for the Team Foundation Server application pool on MyServer is MyServer\TFS. This is the same as the Team Foundation Server service account.
The Team Foundation Server Product Version is 10.0.30319.317
The Team Foundation Server Service Level is Tfs2010.RTM.KB2135068.P#3.
The MyServer has 1 processor(s) installed.
The MyServer has 6134 MB of memory installed.
Volume C:\ on MyServer is a mount point.
I started up a Virtual Machine with Windows 7. Installed and configured TFS. Everything seems to work fine on the Virtual Machine. With an environment working, I started to compare differences between the two.
Here are some of the differences I found between the two environments:
My primary computer is 64-bit and the Virtual Machine is 32-bit.
On my primary computer, IIS "Team Foundation Server Website" has a "aspnet_client" directory. On the virtual machine, this directory does not exist
On my primary computer, in IIS Manager for "Team Foundation Server" the section ASP.NET are the same on both my primary computer and virtual machine.
On my primary computer, IIS Manager IIS Section has these additional feature that the virtual machine does not include (ASP, Authorization Rules, CGI, IP Address and Domains, and WebDav Authorization)
On my primary computer, IIS Application Pool setting has a property call "Enabled 32-Bit Application". This was set to false and I changed it to true. Understandably this feature is not available on the virtual machine.
Thanks.
My application pool had been stopped as well and when I looked into why or how, I discovered that it was running under a domain account of one of our admins who initially installed TFS (months ago).
B/C of a corporate domain policy, he was forced to recently enter a new password for his account. Then after business hours last night, an update was applied to the IIS server on which TFS runs, and the update required a reboot. B/C the password of the identity under which the app pool runs had changed, IIS could not restart the pool, as the identity was still set to the original domain account and password.
Once I had the admin enter his new password with the app pool's identity, the pool would restart. However, b/c corporate enforces password expiration like every 90 days, I ultimately changed the identity to local system account in order to avoid this problem in the future (choosing local system may not be the best choice).
Start -> Administrative Tools -> IIS
{Server name} -> Application Pools
Right Click on Microsoft Team Foundation Server Application Pool -> Advanced Settings
Identity -> Choose Custom Account -> Click Set -> Enter the username and password of the system admin
Stop then Start Microsoft Team Foundation Server Message Queue Application Pool
Stop then Start Microsoft Team Foundation Server Application Pool
I got this error as well. In the application pool there is a TFS App Pool that was stopped. Once this was started again the 503 error stopped occuring
I never got it to work. I created a VM and installed Team Foundation Server (TFS) 2010 and everything seem to work good. To conclude, I'm not sure what was wrong, but if I install it on a fresh server everything works fine
The very first thing you must do is to ensure that the application pool is running.
I just ran into this problem. Our TFS server is not part of a domain. I noticed that the HTTP log file seemed to list IPv6 addresses at times and at other times IPv4.
I turned off IPv6 and we were able to once again connect to TFS.
Uncheck Limit connection on IIS to solve this problem.
Limiting Connections (IIS 6.0)
In my case... (my problems aren't related to how TFS is setup but accessed from a workstation)
I work for a large bank and have a sophisticated firewall/proxy - suffice it to say I have had to play with clicking various options to properly connect to our TFS AND connect to the Internet (to download Visual Studio extensions). I fix my error under the proxy settings in IE under OPTIONS | Connections | LAN Settings...
I've had some 503 errors from TFS myself, if my memory serves correctly (I can't test much as my test server is currently down) I had some issues with the versions of ASP.NET the TFS website was configured to use.
Check that ASP.NET is configured to use version 4.0 in IIS (right click the site > Properties > ASP.NET). Also make sure that no other non TFS sites are in the same application pool as your TFS site (actually a virtual directory in your TFS site) and configured separately (they don't seem to play well together!).
I just checked my team foundation services from application pool through inetmgr and found my services was not running.i started it and now i am able to connect to the server.
After installing several times I got it working with installing SQL Server 2008 R2 (Developer) instead of using SQLExpress.
I encountered the same problem today.
Resolution is start installation distrib of TFS and repair product
(in my way i re-install only tfs 2010 service pack 1).
Go to Application Tier in TFS Administration Console and change account; it may fix the problem
I very recently ran into a similar issue. One of our tools sporadically failed when attempting to contact our TFS resource. Comparing the machines in our TFS VIP, only one machine had IIS errors, namely (truncated): 503 8080 QueueFull Microsoft+Team+Foundation+Server+Application+Pool. A quick comparison of app pool settings showed that the good machine had a queue length of 1000, the bad had only 10. 1000 might be excessive, but 10 was apparently too small. I am yet to verify that changing queue length from 10 to 1000 fixed my issue. Hopefully I remember to complete my post! Hope this helps someone...
If the TFS server name is longer than 15 characters it could be an issue with the netbios name being different than the servername. In our case the AppFabric Service was crashing, and we had to use the following to fix the Cache Host name:
http://www.andrewjbillings.com/long-server-name-causing-app-fabric-service-to-crash/
This resolved the TF24668: The following team project collection is stopped errors that we were getting, along with some TF400732: The request has been canceled. and TF246066: Team Foundation Server is offline. error messages
I have TFS installed on my local machine and TFS is running under custom account.
I solved 503 error by setting the App Pool credentials again (Microsoft Team Foundation Server Application Pool and Microsoft Team Foundation Server Message Queue Application Pool)
Another, pretty special reason could be, that you set "Logon as a batch job" in AD explicitly. If you do not specify this setting it defaults to "Administrators;Backup Operators". If you overwrite it e. g. to allow a custom account to schedule a task you must make to not forget adding the default values. Else exactly this problem 503 Service unavailable and a stopped app pool appears.
Related
So this is with some of my Windows Remote Desktop License Servers, which I am using with Microsoft Azure Cloud Subscription.
The issue I am facing is related to the license expiry. A fully functional and activated 2012 Remote Desktop Session Host server displayed the following message:
"THE REMOTE SESSION WAS DISCONNECTED BECAUSE THERE ARE NO REMOTE DESKTOP LICENSE SERVERS AVAILABLE TO PROVIDE A LICENSE.PLEASE CONTACT THE WINDOWS ADMINISTRATOR"
This was a simple setup on one server with the: connection broker, Session Host and Licensing server with 2012 CAL’s installed. And though the licensing seems to be configured correctly, in server manager.
But with the CAL(client access license), every user logging on to Server, gets the error message mentioned before. For every user, I need to update the CAL license again and again, and this issue occurs every 30 or 60 days. Kindly suggest something, and feel free to ask more details on this, if needed.
Step 1: The solution is delete the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSLicensing
Step 2: Try connecting in again.If it doesn’t work and you get the following error message: “The remote computer disconnected the session because of an error in the licensing protocol“then all you need to do is Right-Click on the Remote Desktop Connection icon and select “Run as Administrator“.
While trying to connect to TFS, I am getting error "the service is temporarily overloaded".
Even the IE/ Edge is not able to connect to internet.
Both these issues must be interlinked.
I have tried many things given over web, nothing worked.
When I try to add an account I get HTTP code 503: Service Unavailable
According to the error message "Error 503 the service is temporarily overloaded", seems the Private Memory Limit for the Application Pool is not high enough.
Assuming you are using on-premise TFS, try following below steps to narrow down the issue:
Open the IIS Manager on your TFS server.
Highlight Application Pools and select your Microsoft Team
Foundation Server Application Pool from the list.
Right-click and select Advanced Settings.
Scroll down and check if the Private Memory Limit (KB) is limited, if it's limited, just try to set the value to "0" (A value 0 means there is no limit)
Restart the application pool.
Also try to restart the TFS server site.
Then try it again.
Other similar threads for your reference:
HTTP Error 503. The service is unavailable under simple ASP.NET 4.0 web site
TFS 503 Service Unavailable when retrieving files
I'm trying to setup reporting in TFS 2010.
I can't connect to the Analysis Services database and I also can't rebuild the Analysis services database.
I've tried to connect via TFS Admin console and SSMS and I'm getting this error in SSMS
Connect to Server
Cannot connect to xxx.com,1031.
ADDITIONAL INFORMATION:
A connection cannot be made. Ensure that the server is running. (Microsoft.AnalysisServices.AdomdClient)
The requested name is valid, but no data of the requested type was found (System)
and this error in TFS Admin
The SQL Server instance that you specified was not found or cannot be reached. Specify another server or instance.
The sql server analysis services service is running.
I used the following article to identify the correct port for SSAS service and I still cannot connect.
http://support.microsoft.com/kb/2466860
Any ideas would be appreciated.
It was the port number.
I fixed it by using the above link to identify the port number then connecting using TFS Admin tool.
I have gone through every checklist I could find for configuring SQL Server I could find. I get the same issue on Windows Server 2008 and Windows 7 Pro. First the environment:
SQL Server Express 2012 --installed as main instance (i.e. no named instances)
IP access turned on
Firewall exception for SQLServer
SQL Server user for application access
Windows Server 2008 service pack 2 (also tested with Windows 7 service pack 1)
IIS 7 (also tested with 7.5 with the same results)
.NET 4.0
Our own database code integrated in a .NET MVC 3 application
We have a tool we developed to import data from the old Ruby on Rails app into the new ASP.NET MVC 3 app. The tool can connect to the database using the user account we created, and that's how I discovered some permissions issues for access to stored procedures. This is the tool we are using to verify the connection works.
Data Source=SERVER_IP,1433;Network Library=DBMSSOCN;Database=MYDB;User ID=webuser;Password=webpassword;multipleactiveresultsets=true;
We are using a straight IP address, but to protect our infrastructure I substituted the IP, username, and password. But this is the structure of the connection string we are using. Following the checklists, I was able to connect from another machine on our network using the import tool to the database and import data. I was also able to import data from the same machine that IIS is installed on.
The same connection string provides the dreaded Error 26 "can't find the database server" message on both Windows Server 2008 and Windows 7 Pro:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I have exhausted every resource I can find, and can't seem to get any closer to an answer. I'm not trying to mount file based database, IIS has read/write access to the web application in any case.
I've ruled out the firewall as a cause for the issue. I've tried the settings with the firewall on and completely turned off. There has to be some other permissions level problem that's happening. Problem is I have no idea what permissions level things I have to check.
After opening a ticket with Microsoft, it turns out I was my own worst enemy. The model classes were set up in their own DLL so I could use them for data migration and other supporting tools for the website.
The DLL was looking in the assembly config for the connection string, and if it wasn't found it would use a reasonable default. Problem is the web application never overrode the location from the Web.config file.
The application couldn't find it because I didn't install the database with the default settings.
I've installed Web Deploy 2.1 on a Server 2008 R2 running under VMWare.
In the IIS Manager (Management Service applet) I can see that "Enable Remote Connections" is checked and the port is set to 8172. Under "IIS Manager Permissions" I've added my Windows account (CORP\ekkis) and under the "Authentication" applet (for IIS) I have enabled "Windows Authentication".
I've also turned off the firewall.
So from the command line I test the system to work like this:
C:\Program Files\IIS\Microsoft Web Deploy V2>msdeploy -verb:dump -source:contentPath=\temp,wmsvc=192.168.0.70,username=CORP\ekkis,password=MyPass,authType=Basic -allowUntrusted=True
and get this:
Info: Using ID '9b954a0f-ff07-4e77-ba2c-d27472f5fda0' for connections to the rem
ote server.
Error Code: ERROR_USER_UNAUTHORIZED
More Information: Connected to the destination computer ("192.168.0.70") using t
he Web Management Service, but could not authorize. Make sure that you are using
the correct user name and password, that the site you are connecting to exists,
and that the credentials represent a user who has permissions to access the sit
e.
Error: Object of type 'contentPath' and path '\temp' cannot be created.
Error: The remote server returned an error: (401) Unauthorized.
Error count: 1.
I've also tried deploying with Visual Studio 2010 from the host OS with the following service urls (I haven't found proper documentation on how to form this url):
https://192.168.0.70/
https://192.168.0.70:8172/
https://192.168.0.70:8172/MsDeployAgentService/
https://192.168.0.70/MsDeployAgentService/
I've tried the non-secure versions as well but just cannot get it to work. What is the correct format for the url? and what permissions am I missing?
the errors from VS have varied depending on how I attempt it but below is a sample:
Could not complete the request to remote agent URL 'http://192.168.0.70:8172//MSDEPLOYAGENTSERVICE'.
The underlying connection was closed: An unexpected error occurred on a receive.
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
An existing connection was forcibly closed by the remote host
Publish failed to deploy.
there really should be a guide out there to do this (yes, I've googled myself blue in the face)!
thanks - ekkis
ok, I've figured out that the correct url is:
https://192.168.0.70:8172/MsDeploy.axd
and that having the "Windows Authentication" enabled doesn't seem to make a difference. Also, having my account in the "Managers" list doesn't seem to make a difference either.
so the back end was all working fine (I've turned off the Web Deployment Agent Service). it was just the url I had wrong.