For some reason Visual Studio has stopped auto-checking out my edits I do to my project. I use VS2005 for the source control and have never had any issues with it like this ever. I haven't made any modifications to the server or my workstation. Has anyone else experienced this? It's a bit tedious to manually check out every file I edit.
Thanks.
Update: As it turns out checking out the entire project/solution and checking it back in fixed this issue. It seems to be an issue files getting set to read-only outside of VSS' control and you have to force VSS to check out everything before it will resume doing it automatically
Did you check your configuration in VS2010?
Tools -> Options -> Source Control -> Environment -> Checked-in items
This blog has step by step instructions to resolve it and some background info, but basically his list is:
Check in everything
Close visual studio
Make sure every file is set to read only in the solution directory (set it on the root solution folder and configure it to propagate to children)
Search for all files under the root projet directory *.user and *.vssscc and delete them
Open VS and load the solution
Check everything back out and then check everything back in
Related
I'm not sure why, but Visual Studio is not showing all the projects in my solution. I need them to show so I can set as default project under solution explorer. I'm not seeing a fix for this issue in a general internet search. The closest I see is VS not showing files folders, but this is different than my issue. Hopefully there is an easy way to fix it, without adding things again piecemeal. My co-workers can see their complete set of projects in solution explorer so it must be a corruption in my workspace.
Open your ".sln" project file using Notepad.
In this file you can observe listed projects like below
Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "test.myProject.Data", "test.myProject.Data\test.myProject.csproj", "{6D7F7B84-F3BD-4A19-A069-D144C345B887}"
EndProject
Please add if there any missing projects. If you have old back up or co-workers file, Just copy and paste missing projects to this file.
In my case it works !!
close vs , delete .vs folder then open vs again. it works for me.
I found that re-adding the existing project to the solution worked for me!
I had to copy out changed files in my workspace, fix my permissions/ownership on my directory (it was no owner instead of me), re-do the mapped drive the workspace was on, re-do the shortcut to the Visual Studio project (even though it was supposed to theoretically be the same place I mapped), re-pull the project down, and copy my changes in again. At this point Visual Studio had the missing solutions in it again so I could set startup project and run the debugger. I'm not sure how the ownership/permissions got messed up. I think at one point the other office had a server go down, and maybe my permissions/ownership got mixed up then. I'm not sure why VS wasn't showing the missing projects, but it's fixed after doing the above.
I had the same issue where my colleague saw 1 more project on his computer.
I deleted my .sln file and got the exact same version as he. Problem was still the same.
Solution was: I had an unloaded project. Apparently this is safed in a local user setting file (probably the .suo file). I looked for the unloaded project and loaded it again.
Close the VStudio entire project, go to the main project folder and click on the .sln file to load the entire project agian.
go to solution explorer see which are having (unload), right click and load project with dependencies
sometimes check if the project startup has changed, if changed just right click on the related project and set as project startup
This .sln file structure breakdown offers a great insight on how projects are able to be found and populated into the project hierarchy. My .sln file had lost all its project persistence blocks and thus I had 0 projects under my solution. I copied the blocks from a a previous git commit and this fixed it. I still don't know why the blocks disappeared or the whole .sln file changed
If the other solutions didn't work for you, then try this.
You can add the missing project to the solution file using the dotnet command. To do so, go to the root folder of your project and run the following command from the terminal:
dotnet sln add ProjectLibrary/ProjectLibrary.csproj
The ProjectLibrary/ProjectLibrary.csproj is the path to your missing project.
You can open the .sln file to confirm if the prject has been added. You should see something like:
Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ProjectLibrary", "ProjectLibrary\ProjectLibrary.csproj", "{F042B1DB-F887-44CC-941A-76569A86AF75}"
EndProject
Hope this helps.
I had the same issue. After opening the Visual Studio in Administrator mode it started to work.
Search for VS->Right click-> "Run as administrator"
I have moved a Visual Studio 2010 project to another server by copying and pasting the folder contents into another folder on a different server.
My understand was that VS2010 handled this well; when I have done this locally it has never been an issue.
Now I get an error like this:
When I right click and "Reload project", the list of files briefly appears before disappearing again, giving the original error.
Am I doing something wrong?
I experienced the same problem today. Here is what I did and worked for me :
Open the .sln file.
Right click on the project folder and click Reload project.
You will see the projects and folders that you originally had.
You will see .xml publish file . Double click it .. You should be good to go now.
I had this problem today and it took me a while to figure out what was going on.
Your problem is most likely that your solution was originally made with a Visual Studio configuration that contained support for certain project types (such as "Windows Service" or some other exotic project type). The Visual Studio configuration you are using to import your solution does not have that support. In other words,
there is probably nothing wrong with your solution,
there is probably nothing wrong with your project,
there is probably nothing wrong with any of the files (as you mentioned they do display briefly, giving you a second of hope)
Just run the installer on the new Visual Studio and make sure the support is enabled for all the project types you need and try again.
In my case the problem was the .vbproj file had somehow been corrupted so the normal xml code was replaced with a long string of null characters. I noticed this thanks to a file that was generated in the same folder as the project file when I tried to open the project - it was called 'UpgradeLog.htm'. This had an entry saying ' Error on line 1. Expected '<' but found 'null character'.'.. suggests there may have been a recent update to Visual Studio that I hadn't noticed?
Luckily I could use my source control system to revert back to a slightly earlier version - I guess it shows how important it is to have backups!
In my case, I saw similar message (Projected was unloaded) and all I had to do was simply re-launching Visual Studio (2017) in Admin mode and the problem went away. Per one of the above answers, I tried to right-click and selected Reload but got a warning that, due to required access to IIS on the machine, I had to launch VS in Admin mode.
HTH
Found this answer and it worked for me.
Note:Sometimes, the path in File path property is grayed out and you are unable to get to the Browse button. In this case try deleting .suo files. Don’t worry, these files gets recreated when you rebuild the solution / project.
http://www.howtosolutions.net/2013/02/solving-project-file-error-could-not-find-part-of-the-path-with-visual-studio/
I had the same problem. I fix path to .csproj files in the .sln file with a text editor and now it is all ok.
Open Visual Studio as Administrator
I have a Visual Studio 2010 Ultimate C++ project (not managed or .NET). When I press F5 (i.e., start debugging), I want it to save all the files, rebuild those that changed, link the whole thing, and then run. Instead, it appears to use the last build. Thus, when I try to step into a function or something, I get the following error:
Based on my research, I have verified these options, the first three of which are in the Options dialog (can be reached under "Debug->Options and Settings"):
"Projects and Solutions->Build and Run->Only build startup projects and dependencies on Run" is checked. Some research indicated that it should be unchecked, but in my case I actually do only want it to rebuild the startup project. For what it's worth, I've tried unchecking it, with no effect.
"Projects and Solutions->Build and Run->On Run, when projects are out of date:" is set to "Always build".
"Debugging->Edit and Continue->Enable Edit and Continue" is checked, though it's greyed out.
In the Configuration Manager ("Build->Configuration Manager"), all solution configurations and platforms have their "Build" checkbox checked.
I have also tried deleting all Debug and Release directories as well as the .sdf and ipch directory.
For completeness, I suppose I should mention that I'm using precompiled headers, though I kinda doubt it matters.
[EDIT: I should note that it only seems to be one file (a .h file) that's doing it. I tried renaming it and recompiling, and also removing it from the solution and adding it back in, but it didn't work. ]
I was able to bring my solution back into the right state after deleting all .suo and .csproj.user files. Answer led to this solution. Hope this saves someone time.
I fell into this state after installing Ultimate over Professional and running profiling tools.
Once I had similar problem with my C# project and I think I have tried every possible suggestion available on internet but none worked and then this is what I have done:
Created an empty Project
Added startup function to verify that it does not show any error
Imported all my source code manually one by one
So, Yes, it was the solution. You already have done a lot so I would say you can get lucky by trying here and there however having a new project and importing your individual source file would be faster.
Another solution could be that switching the platform. I noticed that when I when to project properties, the new project I had just created had a platform of 'win32' and my other projects in the same solution had it set at x64. After I switched my project to x64, everything worked just fine. This worked for my interop(C,C+, C#) project and hopefully works for other projects as well.
I have successfully resolved it, try the following:
remove all temporary and intellisense files
remove all project from solution and then add them back(most important)
check projects 'Frameworks and References' to ensure they are valid
I have a Visual Studio 2010 C++ project which was copied from another visual studio project and renamed. The project compiles fine and works. However recently, I went to the Resource View to edit some dialogs and the window is completely empty. I can't remember if I went there since I copied the project or not:
Any ideas on how I can get this back? I'm thinking there is some cache somewhere?
UPDATE
I should add that this solution is a multi-project solution and normally in the resource view even if a given project does not have resource files you will still see a "folder" for the project in the resource view tree view. There are no "folders" for any of the projects in the solution.
I should also add that other solutions that I open in visual studio will display the resource view fine.
It might be because your Browsing/Navigation Database is disabled.
Check the current setting under:
Tools -> Options -> Text Editor -> C++ -> Advanced. "Disable Database" should be false.
This is a bug as far as I know, and they said they are working on the problem.
More Info:
http://connect.microsoft.com/VisualStudio/feedback/details/535971/solution-resource-view-empty-when-option-disable-database-c-is-set-to-true
I had similar problem that I solved with reloading projects in the solution (unload projects and then reload all projects).
I had the same issue today, and my class browser was also empty. I fixed it by deleting the ipch directory and the sdf file from the solution's directory. Visual Studio reinitialized the intellisense databases, and the view were back.
Try to find the .rc file in your Solution Explorer, then double-click it which should reload it in the Resource View.
Also check to make sure the .vcxproj file is referencing the correct .rc file (open it up in a text editor). Perhaps you renamed it or something.
Woohoo! Figured it out. Since each project normally has a entry on the Resource View tab regardless of whether it has resources or not, I decided to add a new temp project to my solution to see how visual studio would handle that. So I right clicked on my solution and clicked Add->New project.. and added a new Win32 project with the setting of static library and MFC checked. Once I added the project and went to the resource view all my other projects were back! Then I just deleted the temp project I created.
I'm not sure what it did, but it must have forced visual studio to rebuild some internal cache or something.
I've had the same problem: Resource View was totally blank for a solution with several projects.
I had moved the entire file heirarchy's top directory to a different place (different disk mount too) which probably had something to do with it.
After I finally got all the paths changed (files in projects, the the projects' include and lib paths and so on) and started back on developing, I noted the Resource View was empty, and clicking on the .rc file didn't make anything visible.
But, saving the solution and restarting did the trick.
Simply closing & re-opening the Solution worked for me (VS 2017).
This can also be caused when forcing VS2010 to write browsing information to a location which doesn't exist. For example when settings are exported on another machine and then imported on a new machine which doesn't have this path.
In the following sample, I was forcing browsing information to be written to my local temp folder. When I imported my settings from an old computer, the path was pointing to a non-existent path.
I was working on a class in visual studio 2010 when suddenly my computer crashes. after I restart the computer. I start Visual studio and I find that class to be completely empty.
it contained more than 1000 lines of codes before the class.
is there anyway i can recover that file?
Help please because I don't have another copy of it (Stupid of me)
If you cannot find the source code file, try using Reflector to decompile the most recently built dll you have containing that class. It won't give you your complete source, but at least will give you something to start with.
Note: Reflector is no longer free; if that matters, try dotPeek from JetBrains instead.
Also, look into using a source code control system. This will let you 'commit' versions of your code to a repository, so you'll have a copy in case something like this happens in the future.
Subversion, Git, and Mercurial are popular ones; In my opinion, Subversion would be the easiest to start out with, especially with TortoiseSVN (OS integration) and AnkhSVN (Visual Studio integration). If you don't want to worry about setting up a repository/server, look into a hosted solution, like Beanstalk, which offers Subversion and Git and lets you try it out with a free, limited account.
Good luck - I hope you are able to recover your source!
Something which worked for me was back-up.
BTW I was trying to recover a VS2013 file on a Windows 8 machine.
Try to check in below location in your system.
C:\Users\username\My Documents\Visual Studio \Backup Files\ProjectFolder
I found an original file with original-date.filename.cs name and a recovered-date.filename.cs files.
The original was the one needed.
Deleted the one in project, added the original file and renamed it to file.cs. Tried building and debugging and it gave the expected results.
Also just want to add one more thing...
In my case i had an aspx page with its respective .cs and designer.cs
The .cs file got corrupted and I did build on project, with the designer.cs the project got build successfully and the dll got replaced. And when i tried to recover using reflector everything was in a state no return. :(
So don't build the project if you see any file got corrupted.
in visual studio 2019 I find the file in a files with TMP extension
FileName.cs~xxxxxxxx.TMP
This happened to me a few times as well when Visual Studio was crashed or System was shutdown unexpectedly.You can recover these corrupted file using Recuva. It dose not recover the file every time but in most of the cases it's work perfectly.
Below are the settings which you need to configure before recovery.
Start Recuva. Enter Advanced mode if the Wizard launches.
Click Options.
In the Options dialog box, click the Actions tab.
Click Scan for non-deleted files, and then click OK.
Run the Recuva scan as normal. Non-deleted files are indicated with a green double-circle status icon.
Hopefully, you will find your corrupted file in recovered files as it recover multiple versions for that file.
Very useful question. I got issue of file crash on sudden shutdown of my PC. recovered file using "Recuva"(download link: https://filehippo.com/download_recuva/) software. Scan for non-deleted files was helpful.
I got help from: https://www.samnoble.co.uk/2014/11/30/visual-studio-crashes-and-a-corrupted-cs-file/
Well, that happen recently for me and I did get my file back this way.
1. Find the project DLLs in the bin folder. Example MySolution.dll
2. Download and Install .Net Reflector from https://www.red-gate.com/products/dotnet-development/reflector/trial/thank-you
3. Open the .Net Reflector app and click the open folder icon then move to your bin directory and select MySolution.dll file
4. Then traverse and expand through your namespaces and classes to look into your codes.
5. Have fun!