I'm having this error pop up once I start Visual Studio professional 2013 with update 3.
I don't know whats going on and also when I created a web form and try to put items from the toolbox into a table in my code it doesn't let me. the items are dim and can't select them any more. before I would make a table and try to add Labels, textbox, etc and it wasn't a problem.
Visual Studio 2013 Update 4
Tools -> Extensions and Updates
Disabled "Release Management for Visual Studio 2013 v2.1".
That worked for me.
I got the same issue today, but the error message should be giving you some guidance.
Take a look at mine, it tells me to check the "ActivityLog.xml" for more information.
After looking at the entry my error showed me that it ocured the evening before around 5:30pm and I know I was installing the Visual Studio 2013 Update 4 at this time. So it seems I had a problem with my Update installation.
(Sorry maybe someone can school me on how to properly load an image for viewing)
So I realized my problem was an install issue I created, yours might be an add-on or something similar that you just updated your Visual Studio with that corrupted your VS.
So a little more researching and asking some buddies at work and we tried doing this step in another SO article, which should have the same effect of fixing our package loading problem also.
the Provider package did not load.
After running the steps listed there my Visual Studio started up without any obvious issue.
Hope this helps.
Open ActivityLog.xml in a viewer (I've used Microsoft Edge) and you'll find the error. VSPackage is the "Developer Analytics Tools" extension for me.
The error is gone after uninstalling that package. You can obtain the package and attempt to reinstall from the Developer Analytics Tools page in the Visual Studio Gallery.
I uninstalled and reinstalled Visual Studio and the problem went away for a little bit. It eventually came back complaining about different packages.
Then I noticed my home directory was encrypted. I decrypted the directory and the problem went away.
If it is not an encryption issue, I'd try just uninstalling and reinstalling VS 2013.
Message could be shown in case of "Path" environment variable longer than 2048 characters. In that case, system doesn't work proply with system paths like %windir%.
If it's your case, shorten "Path" environment variable and everything works again.
I recently installed Visual Studio 2013 Ultimate version on my machine. I'm just trying to create a sample windows form project and trying to open the designer / form by double clicking on Form1.cs and I'm getting this weird error message:
"the service microsoft.visualstudio.shell.interop.iselectioncontainer already exists in the service container"
My system is already having Visual Studio 2010 which is working smoothly from a long time. I then installed Visual Studio 2012 which was giving the same problem as above. So I went ahead with installing VS 2013 hoping that I might be able to get rid of this issue, but no use.
Once I click OK on the error windows, I can see the following "message" in the bottom Error List window:
"The file 'C:\Users\ABCD\Documents\Visual Studio 2013\Projects\WebSite1\WindowsFormsApplication1\Form1.cs' does not support code parsing or generation because it is not contained within a project that supports code."
I have spent 2-3 days searching various blogs like these, all of which talk about previous version of Visual Studio like VS 2005 / VS 2008:
https://connect.microsoft.com/VisualStudio/feedback/details/311949/the-service-microsoft-visualstudio-shell-interop-iselectioncontainer-already-exists-in-the-service-container
Form inheritance in Visual Studio 2008 doesn't work
I have even tried uninstalling and reinstalling VS 2013, again no use.
It would be really great if someone can help me out in fixing this.
I've just had the exact same error message.
After compiling the solution(F6 or Build->Build Solution) it worked fine for me.
To deal with your issue, please first make sure that you installed latest updates on your Windows 8 machine, and then repair VS2013.
During your repairing process, please temporally turn off your anti-virus/antispyware software and repair VS2013 with the Administrator privilege.
follow this link
The problem got resolved finally, after so many days and various frustrating tries to resolve the issue. I should thank Tim Atkins from Microsoft for helping me with resolving this issue.
Fix: When we tried 'gacutil /l system.design', we found that there were 3 variants of system.design; One from .Net 2.0 targetting MSIL, second from .Net 4.0 targetting x86 and last one also from .Net 4.0, but targetting MSIL.
On a working machine, there were only 2 entries, the .Net 4.0 one targetting x86 wasn't there. Hence we uninstalled this version using gacutil which did the magic. I was so relieved seeing the win forms popping up without any errors anymore :)
I changed the target framework from 4.5 to 4.6.1 and it fixed it for me. My assumption is sometimes when you change target framework back and forth and the process does not go through all the way (cancelling in the middle of changing it) - something happens that leads to this error. Hope that helps
I solved this be closing VS, deleting contents of the .vs folder where my solution is, restarting VS and recompiling.
Seems like one of those file/settings/caching problems that pop up now and then, might be after switching source branch.
VS2019, .net fw 4.6.2.
If your C drive (Where you are installing Visual Studio) does not have enough space, try moving some files from the C drive to another drives.
I've tried to install Visual C# 2010 Express edition onto my PC, but whenever I try to run it, I get a error message.
Invalid license data. Reinstall is required.
I've already tried reinstalling it, and the message persists.
OS is Vista Home Premium. I already have VC# 2008 Express installed.
I am using Visual Studio 2013 and I have the same issue but it occurs when I try to open a solution that was made using Visual Studio 2010.
The solution for me is to open the solution file (.sln), using notepad and change this line:
[# Visual Studio 2010]
to this:
[# Visual Studio 2013]
I just right-clicked, and opened with Visual Studio XXXX (in my case 2015). Then save it. Done.
I have the same problem with Windows 7 Pro. Have tried everything suggested by the Microsoft people, including uninstalling, cleaning up, reinstalling both from the web installer and the VS2010 Express iso - with the same result every time.
To say it's frustrating is an understatement and the disinterest from Microsoft in fixing what appears to be a common problem (you can find lots of search engine 'hits' for the problem, none for a solution) is quite unbelievable.
Since this is virtually a virgin Win7 install, the only conclusion is that MS have broken their licesing checks again (why check for a license on a free product?).
Edit: Following further investigation I have concluded that the advice given by Microsoft is useless and does not attempt to diagnose the problem. It simply assumes a corrupt installation source. I believe that the problem is in fact corrupt permissions/ownership of registry keys. HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Licenses and subkeys needs to be owned by SYSTEM with admins having full access. On my affected system the owner cannot be displayed and no permissions are shown when viewed by admin.
I don't have the definitive fix for this so far, as I cannot adequately edit the permissions for the affected registry keys.
Re-installing Windows is an almost certain fix, but also an extremely drastic one.
I have had this EXACT problem with VS2010 Professional Trial / Evaluation download. I can provide clear and concise steps to reproduce:
Set your system clock ahead by 1 day (oops!)
Install the trial software.
Set your system clock back to the correct date.
Start VS2010, you will receive the vague message indicating "Invalid license data. Reinstall is required."
In my case, the resolution was quite simple - set the clock back ahead to the wrong date. The next day, I was able to set the clock back to the correct date and continue using the product.
Based on other answers to this question, it would appear there are numerous reasons that you could receive this message. This specific issue is most likely to be encountered by someone with a "virgin" install of Windows since it is not so difficult to set the clock incorrectly when setting up a new computer and then fix it later (and if you fix the clock hours after installing the product, it might be hard to put it all together and realize what happened).
Hope this helps someone else.
I had this issue but I was able to resolve this by right clicking and using Run as Administrator. This boots up the program just fine.
This worked for me on Vista. It's based on work-around at MS: http://connect.microsoft.com/VisualStudio/feedback/details/520110/invalid-license-data-reinstall-is-required
Download subinacl command line tool
http://www.microsoft.com/downloads/en/confirmation.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en
Run these commands:
subinacl /subkeyreg HKEY_CLASSES_ROOT\Licenses /setowner=everyone
subinacl /subkeyreg HKEY_CLASSES_ROOT\Licenses /grant=everyone=f
Start VS 2010 Express again and this time it asks for a license key.
(On Windows 7 Home I had to run the above commands twice before they worked correctly)
I got the problem when instelled MS SQL 2012 with IngegrationService, the MS Visual Studio 2010 (Isolated) was installed from sql installer .
This VS returned error: Invalid license data. Reinstall is required.
I've fixed the problem by reinstalling SSDT with MS VS 2012 (Integrated)
http://msdn.microsoft.com/en-us/jj650015
I had this problem when installing a new SQL Server 2012 standalone Server.
Cause: When installing SQL Managemnt Tools it will install the VS Shell. It seems like this is all you need but this ist not enough! (it actually shows it will install VS)
Strangly the path and the application are shown in windows put you can't open them without the error.
Fix: You need to also install "SQL Server Data Tools" via Feature Add with the SQL-Server.iso
Hope this helps someone... i took me quite a while.
I get this error only when trying to open older solution files. For instance, I've got VS2013 installed and this error message pops up when I double click on a VS2010 solution file.
Getting rid of it is so simple:
Launch VS2013
Open the old solution file by clicking
"File->Open->Project/Solution..." from the menu (or simply by
pressing Shift+Ctrl+O)
Save the solution with the new format by clicking "File->Save
Solution As..." and overwrite the old file.
It appears that this has been reported as a bug, but has been closed as "Not Reproducible". One suggestiong from the Microsoft supporter is to redownload and reinstall:
Please try downloading the complete ISO from http://www.microsoft.com/express/Downloads/#2010-All, mount it as virtual drive. Then execute Visual C# setup from the ISO media and select an option to remove the product. Once the Visual C# has been uninstalled, please try installing it again from the ISO media.
It sounds a bit far fetched to me, but you might want to give it a try.
If that does not help you, I would suggest that you either post a new bug report to Microsoft or vote to reopen the existing one (I am not sure if/how this is possible).
I have faced this problem when installing the Visual studio 2010 - C# express using the local administrator account, then trying to register the application using another account that doesn't have Admin privileges, due to corporate polices this account can’t edit in the Registry by any means, so suddenly that’s how I figured out how to solve this issue I open VS 2010 as a local administrator then entered the registration key, and it is worked , I don’t understand how do that Microsoft itself didn’t mention this solution or even try hard to investigate or solve this issue
I just encountered this problem on a virgin install with a system that has a bad clock battery (when I turn off the power, it resets the date/time. Syncing to time.windows.com again allowed me to run VS2010 successfully.
It was not the clock for me, and all the hours spent re-downloading and reinstalling were a waste of time (except for the last one, of course....).
Also, for some odd reason, just adding Read permissions to the HKCR node using psexec -i -s regedit did not work by itself.
To fix my problem on Windows 7, I made sure (using psexec -i -s regedit) that my login account had full control permission over every node in the registry and that the everyone group had read permission over every node in the registry, and did all of the steps in the following link (rebooting after each step):
http://windows.microsoft.com/troubleshootwindows7sp1
This is probably overkill, but after spending 10+ hours trying to get this working, I am just happy it works... Good luck!
I was stuck for several days with the same problem. Investigating the registry i found several keys in HKCR were i was denied access even as adminstrator. Among these keys were the Licences key. Tried a lot of things to resolve this access problem but could not fix it.
Finally i worked around this problem with a reinstall of Windows 7 - choosing the Upgrade option when prompted to choose between upgrade or a fresh install. Had to reinstall video drivers but all my programs and user accounts survived.
http://windows.microsoft.com/en-US/windows7/Installing-and-reinstalling-Windows-7
After the upgrade i have access to the HKCR\Licenses again and Visual Studio 2010 starts as expected.
I had this problem and finally got passed it. I tried the solutions above to no effect. (I set my license keys to open permissions, set my clock forward, etc.) After two days I gave up...
In the end, I installed VS 2012 Express, which could handle VS 2010 solutions but could not compile 2010 code (without a COFF error). After finding this article on requiring VS 2010 to be installed to compile 2010 solution in VS 2012, I reinstalled VS 2010 even though I assumed it wouldn't work on its own. I tried opening 2010 anyway and it worked!
Analysis: as per the previous correct note by reece (and the original workaround author), I used ProcessMonitor to see what devenv.exe tries to do and fails.
Unfortunately, it was attempting to read a number of reg keys which were not under the Licenses node (so it wouldn't have been enough to take ownership of the latter with subinacl). Furthermore, even after taking ownership, the affected keys still yielded "ACCESS DENIED". Doing it as Administrator was equally useless. Plus, Visual Studio didn't fall for any date change nonsense either.
Solution - Don't try this at home :D though: I downloaded pstools and ran psexec -i -s regedit to get System privileges, then I changed permissions on the entire HKCR node to allow Everyone to Read (:P what can I say, viva el comandante).
I want to point out that adding "Everyone" to have read permissions on HKEY_Classes_Root did fix this issue for me.
I am not sure exactly what permission is needed, but this "worked for me" ... YMMV
This may also occur if you are trying to invoke an xml file instead of the exe application.
An another solution I have found to work is the one mentioned Mac by over at SuperUser: https://superuser.com/questions/651261/how-do-i-fix-an-invalid-license-data-reinstall-is-required-error-in-visual-s
When simply reinstalling the Visual Studio 2010 shell doesn't work, he points out that installing it through SSMS 2010 can solve the problem:
I was able to resolve my issue without making any manual changes to
the Windows Registry by installing SQL Server Data Tools 2010, which
is also free and includes the Visual Studio 2010 Shell.
You don't have to go through the entire install process. I cancelled the process when it was done installing the shell and it worked our fine.
If you're here from Google and are experiencing this issue with GFI MailEssentials's config export tool, check to make sure you aren't trying to open WebMon.SettingsImporterTool.exe.xml instead of WebMon.SettingsImporterTool.exe
If you have "hide common file extensions" enabled, you will see the .exe but not the .xml
Just happened to me with a new install of Visual Studio 2010 ultimate in a new computer.
This new computer had the internal time correctly set, but the date was set to one day late. I installed Visual Studio 2010 with the incorrect date. Then, I noticed of the incorrect date and changed it by sync'ing with a NTP server, and from that moment Visual Studio 2010 would not work... so I'll have to stop using Visual Studio 2010 until DateTime.Now > installationDate.
I met the same problem yesterday.And I fixed already.
Please follow the steps:
Run setup.exe again; Change or Remove Microsoft Visual Studio 2010;
Upgrade license Key (Enter new license key); Complete.
GOOD LUCK !
To everyone who has internet connection. Don't mingle with your
registry it's just a waste of time. Set your CMOS clock right then
just click on the button that say's "Obtain registry key online" fill
up the form(two fields are only required) then the registry key would
show up to your screen then just copy and paste it. then everything
works fine. sorry I can't post any images I still need to earn more points...
Background: Visual Studio 2012 Pro installed by Administrator account.
As "Joe User" (member of Win 7 Users group, but NOT Adminstrators) I got the error message.
On reading this forum I concluded this is a generic error message.
Steps to fix:
As an adminstrator, open HK_CLASSES_ROOT.
Open context menu on the Licenses subkey
Select Permissions...
Set Full Control for all users.
Now log on as "Joe" again.
Voila!
Next, as Administrator change the permission on HKCR/Licenses back to read only for Users.
Two hints for developers.
If you can develop and run an application as an ordinary user, then presumably your poor
clients don't need admin rights to run it either.
Don't leak security information in "helpful" error messages. Microsloth are probably following their own advise and giving a vague and unhelpful error message here.
I have no idea why changing the permission to FC then back again to the original setting worked. I can only assume the Visual Studio writes something to that key the first time it runs.
While none of the above solution worked for me (else than running the application with an other username),Renaming the application folder in %appdata% fixed the porblem for me.
"C:\Users...\AppData\Roaming\Microsoft\MS Project"
I had this issue while installing dynamic ax setup in VM, while installing it was showing me to 'licence is not valid, Reinstall visual studio shell 2010 version', so i uninstalled the visual studio shell 2010 version and its following component and tried to install again the AX admin it worked.
I'm having this problem with Visual Studio 2015 installed.
ramonsantana over at forum.unity3d.com had the solution for me: https://forum.unity3d.com/threads/if-anyone-is-having-visual-studio-shell-2010-invalid-license-data-reinstall-is-required.298824/
Copied here for reference
Use regedit go to HKEY_CLASSES_ROOT and look for Visual Studio.DTE
Since i have Visual Studio 2015 CTP installed i have 3 DTE, one is
VisualStudio.DTE, the other Visual StudioDTE.10.0 and
VisualStudio.DTE.14.0 Go to VisualStudio.DTE.14.0 ( or whatever
version of Visual studio you have installed) and click CLSID.
Copy the
Default (Double click Default and Copy the key inside), now go back to
Visua Studio.DTE and double click the Default there and paste the key
you just copied.
Almost there
On VisualStudio.DTE go to CurVer and
double click the key there to Edit it. Change the 10.0 in the end to
12.0 or 13.0 or 14.0, depending on what version of Visual Studio you have and you are done.
Installing SQL server data tools for visual studio 2010 did it for me! SSDT has an VS2010 IDE along with it, which overwrites the required registry entries.
You can find SSDT here.
My problem:
VS works fine, but when I create new Solution Setup and Deployment it make Setup file but when I run this Setup file, it say: "Invalid license data. Reinstall is required."
subinacl do not work.
My PC:
OS: Windows 7 64bit.
Visual Studio 2012
My way:
Close Visual Studio
Run regedit.
Pull down HKEY_CLASSES_ROOT
Looking for Licenses
Right click on Licenses -> click Permissions... -> click Advanced -> click User you want edit -> click Edit -> choose This key and subkey -> check all Allow: Full Control, Query Value, SetValue, Create Subkey, Enumerate Subkeys, Notyfy, Create Link, Delete, Write DAC, Write Owner, Read Control... -> check Apply these permissions to objects... -> click OK -> click OK -> click OK -> Close Registry Edit
Start VS
Hope this help
This was my problem with my Visual Basic Net 2005.
This is how I got it solved:
Click start :-> type run (Or press win+r)
Type regedit
Click HKEY_CLASSES_ROOT
Click Licenses
Double click (Default)
Clear all text written in Value data field
Press Ok
Run again Microsoft visual studio
Believe it or not, I have found cases where this problem occurred due to a build error when the build error was due to an error in xcopy in the pre-build events.
We had this problem at a colleges computer, and after trying everything here we set to forget it and fix the error from xcopy. When this was fixed the Visual Studio 2010 shell error stopped popping up, for some reason.
I've had a serious issue with my Visual Studio 2008 setup. I receive the ever-so-useful error 'A problem has been encountered while loading the setup components. Canceling setup.' whenever I try to uninstall, reinstall or repair Visual Studio 2008 (team system version). If I can't resolve this issue I have no choice but to completely wipe my computer and start again which will take all day long! I've recently received very strange errors when trying to build projects regarding components running out of memory (despite having ~2gb physical memory free at the time) which has rendered my current VS install useless.
Note I installed VS2005 shell version using the vs_setup.msi file in the SQL Server folder after I had installed VS2008, in order to gain access to the SQL Server 2005 Reporting Services designer in Business Intelligence Development Studio (this is inexplicably unavailable in VS2008).
Does anyone have any solutions to this problem?
P.S.: I know this isn't directly related to programming, however I feel this is appropriate to SO as it is directly related to my ability to program at all!
Note: A colleague found a solution to this problem, hopefully this should help others with this problem.
A colleague found this MS auto-uninstall tool which has successfully uninstalled VS2008 for me and saved me hours of work!!
Hopefully this might be useful to others. Doesn't speak highly of MS's faith in their usual VS maintenance tools that they have to provide this as well!
I had the same error message. For me it was happening because I was trying to run the installer from the DVD rather than running the installer from Add/Remove programs.
In my case, uninstalling from Add&Remove Programs didn't work. Instead, the problem was due to a recently hotfix installed through automatic updates. The hotfix to VS 2008 (in my case) has the number KB952241, so I uninstalled it using Add/Remove Programs checking on the show updates option. After it was unistalled the problem was gone.
I encountered the same problem and found a very easy solution.Go to the following Link:
http://msdn.microsoft.com/en-us/vs2008/bb968856.aspx
and run VS AutoUninstall tool .This will automatically remove all the components of VS 2008.
Cheers
Sure enough, for me, it was the hotfixes. In Add/Remove Programs, check the "Show Updates" box, and remove ALL of the Hotfixes associated with your version of VS2008. Then try the "Change/Remove" button - it should now proceed without a hitch.
Well, it did for me, anyway... ;-)
I have Visual Studio Team System 2008 Development Edition, and had to remove all updates and Hotfixes:
Update KB972221
Hotfix KB973674
Hotfix KB971091
Reboot, then the following Hotfix appeared, which I then removed as per #riaraos' answer:
Hotfix KB952241
Before the Change/Remove would work!
Hope that helps someone else.
Uninstall hotfixes installed in related to vs2008 and then try again.
It worked for me and hopefully it will for you as well.
Thanks,
Zelalem
Remove the following hot fixes and updates
Update KB972221
Hotfix KB973674
Hotfix KB971091
Restart the PC and try to uninstall now. This worked for me without problems.
Microsoft itself posted a KB article about this, and that article has a service pack that they claim fixes the problem. See below.
http://support.microsoft.com/kb/959417/
It took a while for the associated update to install itself, but once it did, I was able to run the Visual Studio setup successfully from the Add/Remove Programs control panel.
You should look for the MSI setup logs in the temp directory of your system. They will contain detailed inforamtion about why the setup failed.
I had a similar installation problem with Visual Studio 2008 which I was able to resolve by studying the logs.
I think this sort of question is entirely appropriate to the forum, especially if an easy solution can be found, as would save others hours of pain.
Unfortunately I dont have the solution, but would suggest (if you haven't already)
Run FileMon to see if the
installer is looking for specific
files which are no longer there -
this may give some clues.
Painful, but try uninstalling other apps based upon the VS shell (eg 2005) first.
Thanks, riaraos, uninstalling KB952241 was the solution for me, too. Before doing that I tried to run the installer from "Programs and Features" and from the installation DVD without success. I did not want to completely remove the VS 2008 installation but only add a few components.
Notes on my system:
Windows 7 Beta 1
Visual Studio 2008 SP1
Okay I had the same issues first my VS2008 was acting up so i tried to uninstall it and it didn't work...I read online that using an AutoUninstall by MS will do the trick it did just that , but left a lot of nasty files behind..
So i used "Windows Install Clean Up" and cleaned up more stuff that had to do with VS..
then went back into Add and remove in control panel Removed the KB952241...
then opened up Ccleaner and scanned the registry found a lot of left behind crap from VB2008 removed all that once that was done.
I went ahead and launch the installed back from the CD again and BAM its working.
I did all this without having to restart my PC..
Hope this helps people who are stuck..like i was
In my case, installing visual studio SP1 unbroke the uninstall/repair functionality.
Windows 7 suggested to "Uninstall using recommended settings" after hitting OK in the error message. It solved the problem.
Solution to this is
http://www.dotnetzone.gr/cs/forums/48758/ShowThread.aspx#48758