I'm trying to wrap up my latest app and I want to make it a Free Trial app.
I've done all my checks to see if it is in trial mode or not and now I'm about to launch the MarketPlace so they can buy it. I have a couple of questions...
In this code below, do I have to pass any sort of ID that my app generates so that it knows where to go in the Marketplace? Or is it all done for me in this call?
MarketplaceDetailTask detailTask = new MarketplaceDetailTask();
detailTask.Show();
My second question is in regards to the tombstoning that will happen when this code gets called and what happens after they buy it? Is there some special event that I should be looking for (like a completed event)? From what I understand I need to recheck the license and I'm just wondering what the best practices are for that.
Just as a reference this is the example I'm currently following:
http://msdn.microsoft.com/en-us/library/ff967559%28v=VS.92%29.aspx
Thanks!
1) First Question: if you don't specify the id, WP7 will take the id of the calling app (yours)
2)I have a service in front of the Licence class and when the user goes to the marketplace I reset a field to read again the trial status when ask afterwards (see the buy method below)
public class TrialService : ITrialService
{
private LicenseInformation license;
public bool IsTrial()
{
if (RunAsTrial)
return true;
else
{
if (license == null)
license = new LicenseInformation();
return license.IsTrial();
}
}
public void Buy()
{
license = null;
var launcher = new MarketplaceDetailTask();
launcher.Show();
}
public bool RunAsTrial { get; set; }
}
Related
I am reading this documentation/article from Microsoft on how to Distribute Mobile apps with app center. The problem is I really don't understand how to implement this. I have a app on app center (Android) I want to implement mandatory update so that I can eliminate the bugs of the previous version. I tried to distribute the app with mandatory update enabled and it is not working. How can I fix this?
https://learn.microsoft.com/en-us/appcenter/distribution/
Here is what I did I added this code on my App.xaml.cs (XAMARIN FORMS PROJECT):
protected override void OnStart ()
{
AppCenter.Start("android={Secret Code};", typeof(Analytics), typeof(Crashes), typeof(Distribute));
Analytics.SetEnabledAsync(true);
Distribute.SetEnabledAsync(true);
Distribute.ReleaseAvailable = OnReleaseAvailable;
}
bool OnReleaseAvailable(ReleaseDetails releaseDetails)
{
string versionName = releaseDetails.ShortVersion;
string versionCodeOrBuildNumber = releaseDetails.Version;
string releaseNotes = releaseDetails.ReleaseNotes;
Uri releaseNotesUrl = releaseDetails.ReleaseNotesUrl;
var title = "Version " + versionName + " available!";
Task answer;
if (releaseDetails.MandatoryUpdate)
{
answer = Current.MainPage.DisplayAlert(title, releaseNotes, "Download and Install");
}
else
{
answer = Current.MainPage.DisplayAlert(title, releaseNotes, "Download and Install", "Ask Later");
}
answer.ContinueWith((task) =>
{
if (releaseDetails.MandatoryUpdate || (task as Task<bool>).Result)
{
Distribute.NotifyUpdateAction(UpdateAction.Update);
}
else
{
Distribute.NotifyUpdateAction(UpdateAction.Postpone);
}
});
return true;
}
And here is what I added on my MainActivity.cs(ANDROID PROJECT):
AppCenter.Start("{Secret Code}", typeof(Analytics), typeof(Crashes), typeof(Distribute));
Looking at this App Center documentation here for Xamarin Forms -
You can customize the default update dialog's appearance by implementing the ReleaseAvailable callback. You need to register the callback before calling AppCenter.Start
It looks like you need to swap your current ordering to get in-app updates working.
There could be a lot of different reasons as to why they are not working. As you can see in the Notes here and here,
Did your testers download the app from the default browser?
Are cookies enabled for the browser in their settings?
Another important point you'll read in the links, is that the feature is only available for listed distribution group users. It is not for all your members. You could use a simple version checker for your purpose instead or you could use a plugin.
I wrote an add-in for Outlook years ago that adds entries to a database based on the Item's ConversationIndex/ConversationId properties. This works great and remains uniform across all clients interacting with the messages (e.g. "Bob" can see that "Mary" already processed this message because an entry with the ConversationIndex already exists).
I'm now trying to move this piece to a service (and connect via the EWS API) but I'm not having good luck matching these properties with the values coming from Outlook. For example:
The Outlook Add-In will give me the following values for a specific email I'm targeting:
ConversationID: 6B6369F5023EA646AA7BC161274BDAE8
ConversationIndex: 0101CF3C7EEC6B6369F5023EA646AA7BC161274BDAE8
However, from the EWS API I get the following:
ConversationID: AAQkADFhZThkNmJmLTlkODItNDQyZS1hM2YxLTQ2NWNkMTllYjhjOQAQAGtjafUCPqZGqnvBYSdL2ug=
ConversationIndex: new byte[]{1,1,207,60,126,236,107,99,105,245,2,62,166,70,170,123,193,97,39,75,218,232}
I recognize the first as a Base64 encoded string, however what I get decoded doesn't look like anything I recognize (or can decipher). Is there anyone familiar with this, or who can help to get these two values to align? I can only imagine these properties come from the exchange server is some fashion, but the Client probably performs some cleansing whereas the EWS API just gives me the raw value (less the Base64 for what I presume transport purposes given the XML medium).
If anyone is familiar with this or has done it before I would greatly appreciate any guidance.
Side Note:
There are probably better ways to identify emails but for now I'm stuck with trying to keep these two synonymous. Modifying the outlook add-in isn't really an option, and once I migrate a 1:1 translation to the server (and drop the add-in) I'll have flexibility changing how it work. But for now I need them to run side-by-side. I need to be able to see processes made within Outlook from the web server and vise-versa.
Just found out (I think).
Breakdown
With more Googling and a bit more effort I believe I was able to make them align 1:1 using the following:
ConversationId
This is apparently an assembled value made up of several properties. Luckily I was able to find a method Woodman posted re-implementing the original algorithm used by Outlook here. With some minor modifications (to work with EWS instead of Outlook) I was able to get it to work.
ConversationIndex
This turned out to simply be a matter of using the BitConverter (and removing the hyphens). Easy peasy.
Final Result:
public static class EwsEmailMessageExtensions
{
private const int c_ulConvIndexIDOffset = 6;
private const int c_ulConvIndexIDLength = 16;
private static ExtendedPropertyDefinition PidTagConversationIndexTracking = new ExtendedPropertyDefinition(0x3016, MapiPropertyType.Boolean);
// HUGE props to Woodman
// https://stackoverflow.com/a/21625224/298053
public static string GetOutlookConversationId(this EmailMessage emailMessage)
{
Boolean convTracking;
if (!emailMessage.TryGetProperty(PidTagConversationIndexTracking, out convTracking))
{
convTracking = true;
}
var convIndex = emailMessage.ConversationIndex;
byte[] idBytes;
if (convTracking && convIndex != null && convIndex.Length > 0)
{
// get Id from Conversation index
idBytes = new byte[c_ulConvIndexIDLength];
Array.Copy(convIndex, c_ulConvIndexIDOffset, idBytes, 0, c_ulConvIndexIDLength);
}
else
{
// get Id from Conversation topic
var topic = emailMessage.ConversationTopic;
if (string.IsNullOrEmpty(topic))
{
return string.Empty;
}
if (topic.Length >= 265)
{
topic = topic.Substring(0, 256);
}
topic = topic.ToUpper();
using (var md5 = new System.Security.Cryptography.MD5CryptoServiceProvider())
{
idBytes = md5.ComputeHash(Encoding.Unicode.GetBytes(topic));
}
}
return BitConverter.ToString(idBytes).Replace("-", string.Empty);
}
public static String GetOutlookConversationIndex(this EmailMessage emailMessage)
{
var convIndex = emailMessage.ConversationIndex;
return BitConverter.ToString(convIndex).Replace("-", String.Empty);
}
}
Usage:
// Prep
ExchangeService service = new ExchangeService(...);
Folder inbox = Folder.bind(service, WellKnownFolderName.Inbox);
Item item = /* inbox.FindItems(...).First() */
// Implmentation
EmailMessage emailMessage = item as EmailMessage;
if (emailMessage != null)
{
String conversationId = emailMessage.GetOutlookConversationId();
String conversationIndex = emailMessage.GetOutlookConversationIndex();
/* ... */
}
I have a windows service that can create an executable in the users windows session, via calling the "CreateProcessAsUser" function. This works fine as long as there is a windows session already there. In the case that there isn't one already I'd like to be able to create one programmatically. Is this is possible? Can't seem to find a function to do it.
This isn't quite the solution for the question I asked, but it was the solution that helped achieve what I was trying to achieve by asking this question, if you see what I mean.
Rather than have having a windows services that creates a server session you can configure windows to automatically logon at boot time. This still means someone could accenditally log off, but cures the main reason for sessions disappearing: the server being rebooted. Use the following steps to activate auto-logon:
Press the Windows key + R on your keyboard to launch the “Run” dialog box.
Type regedit and hit enter to open the Registry Editor
Then browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\
Set AutoAdminLogon = 1 (create it if doesn't exist its a string variable)
Set DefaultUserName = your username (create it if doesn't exist its a string variable)
Set DefaultPassword = your password (create it if doesn't exist its a string variable)
Instructions were taken from this post:
http://channel9.msdn.com/Blogs/coolstuff/Tip-Auto-Login-Your-Windows-7-User-Account
You cannot create a new session from a service. Sessions are managed by the OS. New ones get created when users logon interactively.
#Robert, I know this is an old question and that you've already found something that works for you but in my case I was looking for something similar to your original question and I did finally figure it out so I thought I'd share. My solution uses only .NET and a COM reference not the Win32 API mentioned in your title, but I'm guessing that wasn't really a requirement for you.
I've written a simple utility to using the Remote Desktop ActiveX control (COM Reference). If you paste this code into a Class Library you can then call it by simply passing in the server, username, domain, and password and everything is done for you without any other interaction required. Once the method is complete you can then call your "CreateProcessAsUser" Code. I've written this utility in a way so that you could call it every time but initiating an RDP session takes several seconds so for performance sake I'd suggest you write another method to enumerate the sessions and see if your user is logged in and only call this utility when you determine that your user isn't logged in (That's what I did in my actual project). If you feel you need help with that post in the comments and I'll share how I did that but It's not really part of this question so for now I'm leaving it out.
Here's a link back to my question that has a few more requirements/details than this question.
Create Windows Session programmatically from Console or Windows Service
And here's my RDP utility. After you put this code in a class library you can then call it from a console app, winForms app, or from a windows service running on the same machine or from a remote machine.
using System;
using System.Diagnostics;
using System.Threading;
using System.Threading.Tasks;
using System.Windows.Forms;
using AxMSTSCLib;
namespace Utility.RemoteDesktop
{
public class Client
{
private int LogonErrorCode { get; set; }
public void CreateRdpConnection(string server, string user, string domain, string password)
{
void ProcessTaskThread()
{
var form = new Form();
form.Load += (sender, args) =>
{
var rdpConnection = new AxMSTSCLib.AxMsRdpClient9NotSafeForScripting();
form.Controls.Add(rdpConnection);
rdpConnection.Server = server;
rdpConnection.Domain = domain;
rdpConnection.UserName = user;
rdpConnection.AdvancedSettings9.ClearTextPassword = password;
rdpConnection.AdvancedSettings9.EnableCredSspSupport = true;
if (true)
{
rdpConnection.OnDisconnected += RdpConnectionOnOnDisconnected;
rdpConnection.OnLoginComplete += RdpConnectionOnOnLoginComplete;
rdpConnection.OnLogonError += RdpConnectionOnOnLogonError;
}
rdpConnection.Connect();
rdpConnection.Enabled = false;
rdpConnection.Dock = DockStyle.Fill;
Application.Run(form);
};
form.Show();
}
var rdpClientThread = new Thread(ProcessTaskThread) { IsBackground = true };
rdpClientThread.SetApartmentState(ApartmentState.STA);
rdpClientThread.Start();
while (rdpClientThread.IsAlive)
{
Task.Delay(500).GetAwaiter().GetResult();
}
}
private void RdpConnectionOnOnLogonError(object sender, IMsTscAxEvents_OnLogonErrorEvent e)
{
LogonErrorCode = e.lError;
}
private void RdpConnectionOnOnLoginComplete(object sender, EventArgs e)
{
if (LogonErrorCode == -2)
{
Debug.WriteLine($" ## New Session Detected ##");
Task.Delay(10000).GetAwaiter().GetResult();
}
var rdpSession = (AxMsRdpClient9NotSafeForScripting)sender;
rdpSession.Disconnect();
}
private void RdpConnectionOnOnDisconnected(object sender, IMsTscAxEvents_OnDisconnectedEvent e)
{
Environment.Exit(0);
}
}
}
What about the LogonUser function?
http://winapi.freetechsecrets.com/win32/WIN32LogonUser.htm
I've been trying to do this all morning. Anyone have a code snippet (C#) showing how to update an "activity" within CRM via the webservice?
I can CreateReadUpdateDelete with entities, but I'm not sure how to do it with Activities.
Can't find anything on google either...
What are you specifically looking to update? Basically, updating an activity is just like updating any other entity, you just have to use the task entity.
public void CloseTask(CrmService crmsvc, Guid activityid, DateTime start, DateTime end)
{
ColumnSet cols = new ColumnSet();
cols.Attributes = new string[] { "activityid", "statecode" };
task tsk = (task)crmsvc.Retrieve(EntityName.task.ToString(), activityid, cols);
if(tsk.statecode.Value != TaskState.Open)
return;
tsk.actualstart = new CRMDateTime();
tsk.actualstart.value = start.ToString();
tsk.actualend = new CRMDateTime();
tsk.actualend.value = end.ToString();
crmsvc.Update(tsk);
SetStateTaskRequest state = new SetStateTaskRequest();
state.EntityId = activityid;
state.TaskState = TaskState.Completed;
state.TaskStatus = -1; // Let MS CRM decide this property;
SetStateTaskResponse stateSet = (SetStateTaskResponse)crmsvc.Execute(state);
}
Edit: added some sample code. note, I had to modify what I had to strip some proprietary code, so I don't know if this will actually compile. It's close though.
We can also update a Custom Workflow Activity Using Assembly Versioning. Below link gives more information:
http://msdn.microsoft.com/en-us/library/gg328011.aspx
What is the alternative for DomainProjectPicker if I want to select a server plus its projects? I am aware of a new class called TeamProjectPicker, but that doesn't help me. Anyone know how to select the server from this type of dialog?
Thanks,TS.
As far as I can figure it out it's more or less the same as the DomainProjectPicker.
Here's a code sample of how I was working with it:
if (tpp.ShowDialog() == DialogResult.OK)
{
try
{
//here you get the TfsTeamProjectCollection (the TeamFoundationServer class is also obsolete)
TfsTeamProjectCollection tfsProj = tpp.SelectedTeamProjectCollection;
//here you authenticate
tfsProj.Authenticate();
}
etc...
You can use the TeamProjectPicker class from Microsoft.TeamFoundation.Client.dll. There is a great blog post that describes how to wrangle the dialog: Using the TeamProjectPicker API in TFS 2010
Here's the code sample for selecting multiple team projects:
Application.EnableVisualStyles(); // Makes it look nicer from a console app.
//"using" pattern is recommended as the picker needs to be disposed of
using (TeamProjectPicker tpp = new TeamProjectPicker(TeamProjectPickerMode.MultiProject, false))
{
DialogResult result = tpp.ShowDialog();
if (result == DialogResult.OK)
{
System.Console.WriteLine("Selected Team Project Collection Uri: " + tpp.SelectedTeamProjectCollection.Uri);
System.Console.WriteLine("Selected Projects:");
foreach(ProjectInfo projectInfo in tpp.SelectedProjects)
{
System.Console.WriteLine(projectInfo.Name);
}
}
}
If you don't care about the project and only want the user to be able to select a server and collection, use TeamProjectPickerMode.NoProject in the constructor.