Generally as we know virtual memory is larger than physical memory.But when is it advantageous to define virtual memory smaller than physical memory?
If you have pointer-heavy code, you can save memory by choosing a smaller address space. For example, a pointer on a 32-bit platform occupies 4 bytes versus 8 bytes on 64-bit. The same goes for integer types like size_t.
This only works and makes sense if:
Your code/application/server uses multiple processes and all processes together need more memory than the amount of virtual memory (otherwise you wouldn't need more physical than virtual memory).
Your platform supports more physical than virtual memory (for example, Intel PAE).
The smaller amount of virtual memory is enough for each single process.
Imagine a large server system supporting multiple users. You don't want users to hog memory, so you restrict the size of the logical (virtual) address space by limiting page table size.
Physical Address Extension can be used to access more than 4 GB physical memory by 32 bit architecture. Does it mean that one process can user more than 4 GB of RAM? Based on this picture if we have 32 bits to address a memory we still cannot use more than 4 GB virtual memory, right? Then why do we need addressing more physical memory if we cannot use it as virtual memory?
You can only address 4GB at once (and under 32bit Windows, you will either have 2GB or 3GB for your own process' needs (depending on a boot.ini setting), since the remainder is used for kernel-mode stuff.)
For Windows, you'll use the Address Windowing Extensions - mapping an addressable window to beyond-4GB physical memory. I don't know how other systems handle it, but Linux might do it through mmap()?
Well, if we have a 32bits data bus then we can address 2^32=4GB, that´s a fact. And that means that even when we could have only 1GB physical memory, we can address more than that. However, in that scenario addresses over 1GB, even valid, cause page faults because the memory is just not there!
The SO makes their magic simply catching the page fault and swapping memory to/from disk. That´s the reason we call it 'virtual' memory, because it is just an illusion, a trick (a great one).
Having a 32bits data bus is impossible for a process to have more than 4GB because it is impossible to address more.
I am trying to understand 'Memory Management' in Linux as a part of the course in 'Understanding the Linux Kernel' by Daniel and Marco. Below is my understanding of the Kernel space
On a 32-bit machine, each process has 4GB virtual address space. 3GB - User and 1GB - Kernel space.
The 1 GB is shared among processes and directly mapped to 1 GB of RAM. This space is used to store kernel code, Page tables etc.
The 1 GB cannot be swapped out. Although, it can be freed.
My question is, what if the total kernel space required by processes exceeds 1 GB?
First, a correction - the (almost) 1Gb the kernel has mapped in a 1:1 is not used exclusively by the kernel. It's just that the kernel has the easiest access to that memory. it does hold the kernel code and static data.
The kernel virtual space actually has something like 256 Mb (the number is dynamic) at the top of the virtual address space (top of the 1Gb the kernel uses) that is not mapped 1:1 like the rest of the kernel linear addresses, but instead mapped dynamically to various pages - either in to get a virtual continuous region out of non contiguous physical memory by vmalloc, or to map memory mapped IO by ioremap or to get access to higher then 1Gb pages via kmap.
So to sum up - when the kernel needs access to more memory then the (almost) 1Gb it has always mapped in a 1:1 setting it uses dynamic memory just like user space.
I trying to to make the linux memory management a little bit more clear for tuning and performances purposes.
By reading this very interesting redbook "Linux Performance and Tuning Guidelines" found on the IBM website I came across something I don't fully understand.
On 32-bit architectures such as the IA-32, the Linux kernel can directly address only the first gigabyte of physical memory (896 MB when considering the reserved range). Memory above the so-called ZONE_NORMAL must be mapped into the lower 1 GB. This mapping is completely transparent to applications, but allocating a memory page in ZONE_HIGHMEM causes a small performance degradation.
why the memory above 896 MB has to be mapped into the lower 1GB ?
Why there is an impact on performances by allocating a memory page in ZONE_HIGHMEM ?
what is the ZONE_HIGHMEM used for then ?
why a kernel that is able to recognize up to 4gb ( CONFIG_HIGHMEM=y ) can just use the first gigabyte ?
Thanks in advance
When a user process traps in to the kernel, the page tables are not changed. This means that one linear address space must be able to cover both the memory addresses available to the user process, and the memory addresses available to the kernel.
On IA-32, which allows a 4GB linear address space, usually the first 3GB of the linear address space are allocated to the user process, and the last 1GB of the linear address space is allocated to the kernel.
The kernel must use its 1GB range of addresses to be able to address any part of physical memory it needs to. Memory above 896MB is not "mapped into the low 1GB" - what happens is that physical memory below 896MB is assigned a permanent linear address in the kernel's part of the linear address space, whereas as memory above that limit must be assigned a temporary mapping in the remaining part of the linear address space.
There is no impact on performance when mapping a ZONE_HIGHMEM page into a userspace process - for a userspace process, all physical memory pages are equal. The impact on performance exists when the kernel needs to access a non-user page in ZONE_HIGHMEM - to do so, it must map it into the linear address space if it is not already mapped.
I'm learning the linux kernel internals and while reading "Understanding Linux Kernel", quite a few memory related questions struck me. One of them is, how the Linux kernel handles the memory mapping if the physical memory of say only 512 MB is installed on my system.
As I read, kernel maps 0(or 16) MB-896MB physical RAM into 0xC0000000 linear address and can directly address it. So, in the above described case where I only have 512 MB:
How can the kernel map 896 MB from only 512 MB ? In the scheme described, the kernel set things up so that every process's page tables mapped virtual addresses from 0xC0000000 to 0xFFFFFFFF (1GB) directly to physical addresses from 0x00000000 to 0x3FFFFFFF (1GB). But when I have only 512 MB physical RAM, how can I map, virtual addresses from 0xC0000000-0xFFFFFFFF to physical 0x00000000-0x3FFFFFFF ? Point is I have a physical range of only 0x00000000-0x20000000.
What about user mode processes in this situation?
Every article explains only the situation, when you've installed 4 GB of memory and the kernel maps the 1 GB into kernel space and user processes uses the remaining amount of RAM.
I would appreciate any help in improving my understanding.
Thanks..!
Not all virtual (linear) addresses must be mapped to anything. If the code accesses unmapped page, the page fault is risen.
The physical page can be mapped to several virtual addresses simultaneously.
In the 4 GB virtual memory there are 2 sections: 0x0... 0xbfffffff - is process virtual memory and 0xc0000000 .. 0xffffffff is a kernel virtual memory.
How can the kernel map 896 MB from only 512 MB ?
It maps up to 896 MB. So, if you have only 512, there will be only 512 MB mapped.
If your physical memory is in 0x00000000 to 0x20000000, it will be mapped for direct kernel access to virtual addresses 0xC0000000 to 0xE0000000 (linear mapping).
What about user mode processes in this situation?
Phys memory for user processes will be mapped (not sequentially but rather random page-to-page mapping) to virtual addresses 0x0 .... 0xc0000000. This mapping will be the second mapping for pages from 0..896MB. The pages will be taken from free page lists.
Where are user mode processes in phys RAM?
Anywhere.
Every article explains only the situation, when you've installed 4 GB of memory and the
No. Every article explains how 4 Gb of virtual address space is mapped. The size of virtual memory is always 4 GB (for 32-bit machine without memory extensions like PAE/PSE/etc for x86)
As stated in 8.1.3. Memory Zones of the book Linux Kernel Development by Robert Love (I use third edition), there are several zones of physical memory:
ZONE_DMA - Contains page frames of memory below 16 MB
ZONE_NORMAL - Contains page frames of memory at and above 16 MB and below 896 MB
ZONE_HIGHMEM - Contains page frames of memory at and above 896 MB
So, if you have 512 MB, your ZONE_HIGHMEM will be empty, and ZONE_NORMAL will have 496 MB of physical memory mapped.
Also, take a look to 2.5.5.2. Final kernel Page Table when RAM size is less than 896 MB section of the book. It is about case, when you have less memory than 896 MB.
Also, for ARM there is some description of virtual memory layout: http://www.mjmwired.net/kernel/Documentation/arm/memory.txt
The line 63 PAGE_OFFSET high_memory-1 is the direct mapped part of memory
The hardware provides a Memory Management Unit. It is a piece of circuitry which is able to intercept and alter any memory access. Whenever the processor accesses the RAM, e.g. to read the next instruction to execute, or as a data access triggered by an instruction, it does so at some address which is, roughly speaking, a 32-bit value. A 32-bit word can have a bit more than 4 billions distinct values, so there is an address space of 4 GB: that's the number of bytes which could have a unique address.
So the processor sends out the request to its memory subsystem, as "fetch the byte at address x and give it back to me". The request goes through the MMU, which decides what to do with the request. The MMU virtually splits the 4 GB space into pages; page size depends on the hardware you use, but typical sizes are 4 and 8 kB. The MMU uses tables which tell it what to do with accesses for each page: either the access is granted with a rewritten address (the page entry says: "yes, the page containing address x exists, it is in physical RAM at address y") or rejected, at which point the kernel is invoked to handle things further. The kernel may decide to kill the offending process, or to do some work and alter the MMU tables so that the access may be tried again, this time successfully.
This is the basis for virtual memory: from the point of view, the process has some RAM, but the kernel has moved it to the hard disk, in "swap space". The corresponding table is marked as "absent" in the MMU tables. When the process accesses his data, the MMU invokes the kernel, which fetches the data from the swap, puts it back at some free space in physical RAM, and alters the MMU tables to point at that space. The kernel then jumps back to the process code, right at the instruction which triggered the whole thing. The process code sees nothing of the whole business, except that the memory access took quite some time.
The MMU also handles access rights, which prevents a process from reading or writing data which belongs to other processes, or to the kernel. Each process has its own set of MMU tables, and the kernel manage those tables. Thus, each process has its own address space, as if it was alone on a machine with 4 GB of RAM -- except that the process had better not access memory that it did not allocate rightfully from the kernel, because the corresponding pages are marked as absent or forbidden.
When the kernel is invoked through a system call from some process, the kernel code must run within the address space of the process; so the kernel code must be somewhere in the address space of each process (but protected: the MMU tables prevent access to the kernel memory from unprivileged user code). Since code can contain hardcoded addresses, the kernel had better be at the same address for all processes; conventionally, in Linux, that address is 0xC0000000. The MMU tables for each process map that part of the address space to whatever physical RAM blocks the kernel was actually loaded upon boot. Note that the kernel memory is never swapped out (if the code which can read back data from swap space was itself swapped out, things would turn sour quite fast).
On a PC, things can be a bit more complicated, because there are 32-bit and 64-bit modes, and segment registers, and PAE (which acts as a kind of second-level MMU with huge pages). The basic concept remains the same: each process gets its own view of a virtual 4 GB address space, and the kernel uses the MMU to map each virtual page to an appropriate physical position in RAM, or nowhere at all.
osgx has an excellent answer, but I see a comment where someone still doesn't understand.
Every article explains only the situation, when you've installed 4 GB
of memory and the kernel maps the 1 GB into kernel space and user
processes uses the remaining amount of RAM.
Here is much of the confusion. There is virtual memory and there is physical memory. Every 32bit CPU has 4GB of virtual memory. The Linux kernel's traditional split was 3G/1G for user memory and kernel memory, but newer options allow different partitioning.
Why distinguish between the kernel and user space? - my own question
When a task swaps, the MMU must be updated. The kernel MMU space should remain the same for all processes. The kernel must handle interrupts and fault requests at any time.
How does virtual to physical mapping work? - my own question.
There are many permutations of virtual memory.
a single private mapping to a physical RAM page.
a duplicate virtual mapping to a single physical page.
a mapping that throws a SIGBUS or other error.
a mapping backed by disk/swap.
From the above list, it is easy to see why you may have more virtual address space than physical memory. In fact, the fault handler will typically inspect process memory information to see if a page is mapped (I mean allocated for the process), but not in memory. In this case the fault handler will call the I/O sub-system to read in the page. When the page has been read and the MMU tables updated to point the virtual address to a new physical address, the process that caused the fault resumes.
If you understand the above, it becomes clear why you would like to have a larger virtual mapping than physical memory. It is how memory swapping is supported.
There are other uses. For instance two processes may use the same code library. It is possible that they are at different virtual addresses in the process space due to linking. You may map the different virtual addresses to the same physical page in this case in order to save physical memory. This is quite common for new allocations; they all point to a physical 'zero page'. When you touch/write the memory the zero page is copied and a new physical page allocated (COW or copy on write).
It is also sometimes useful to have the virtual pages aliased with one as cached and another as non-cached. The two pages can be examined to see what data is cached and what is not.
Mainly virtual and physical are not the same! Easily stated, but often confusing when looking at the Linux VMM code.
-
Hi, actually, I don't work on x86 hardware platform, so there may exist some technical errors in my post.
To my knowledge, the range between 0(or 16)MB - 896MB is listed specially while you have more RAM than that number, say, you have 1GB physical RAM on your board, which is called "low-memory". If you have more physical RAM than 896MB on your board, then, rest of the physical RAM is called highmem.
Speaking of your question, there are 512MiBytes physical RAM on your board, so actually, there is no 896, no highmem.
The total RAM kernel can see and also can map is 512MB.
'Cause there is 1-to-1 mapping between physical memory and kernel virtual address, so there is 512MiBytes virtual address space for kernel. I'm really not sure whether or not the prior sentence is right, but it's what in my mind.
What I mean is if there is 512MBytes, then the amount of physical RAM the kernel can manage is also 512MiBytes, further, the kernel cannot create such big address space like beyond 512MBytes.
Refer to user space, there is one different point, pages of user's application can be swapped out to harddisk, but pages of the kernel cannot.
So, for user space, with the help of page tables and other related modules, it seems there is still 4GBytes address space.
Of course, this is virtual address space, not physical RAM space.
This is what I understand.
Thanks.
If the physical memory is less than 896 MB then the linux kernel maps upto that physical address lineraly.
For details see this.. http://learnlinuxconcepts.blogspot.in/2014/02/linux-addressing.html