Here is my code.
update netz98.order_data
set usergroup = 'DISTR'
where
modelcode||optcode||interiortrimcode in ('CW1WXJXFZLAA6016E','CW7WXMXFZLAA6014E')
and committed = 0
;
commit;
ORA-12012 is always followed by a list of error codes/descriptions causing the failure. What you must do is to check your log files and by the errors next to the 12012 itself you will realize what's going on.
The error is not necessarily related with the sentences the JOB is running, so the provided code not necessarily tell the cause, as stated by the referenced documentation:
ORA-12012: error on auto execute of job stringCause: An error was caught while doing an automatic execution of a job.Action: Look at the accompanying errors for details on why the execute failed.
Emphasis is mine.
Related
I am using MSBuild. I have Java 8 installed.
I am running the following commands:
SonarQube.Scanner.MSBuild.exe begin /k:"ABC" /d:sonar.host.url="http://localhost:9000" /d:sonar.login="8b839xxxxxxxxxxxxxxxxxxxxxxx6b00125bf92" /d:sonar.verbose=true
"C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\MSBuild\15.0\Bin\msbuild.exe" /t:rebuild
SonarQube.Scanner.MSBuild.exe end /d:sonar.login="8b839xxxxxxxxxxxxxxxxxxxxxxx6b00125bf92"
The last step fails:
ERROR: Error during SonarQube Scanner execution
ERROR: The 'report' parameter is missing
ERROR:
ERROR: Re-run SonarQube Scanner using the -X switch to enable full debug logging.
The SonarQube Scanner did not complete successfully
12:53:21.909 Creating a summary markdown file...
12:53:21.918 Post-processing failed. Exit code: 1
The MSBuild version is greater than 14.
Java 8 is properly installed. Documentation indicates that Java 8 is adequate.
Any idea on what could be wrong?
Where do I add the -X switch? I tried on all 3 statements
Update :I installed Java SDK 9. Still same issue.
Update :With verbose logging and using /n naming parameter:
INFO: Analysis report generated in 992ms, dir size=4 MB
INFO: Analysis reports compressed in 549ms, zip size=1 MB
INFO: Analysis report generated in C:\ABC\.sonarqube\out\.sonar\scanner-report
DEBUG: Upload report
DEBUG: POST 400 http://localhost:9000/api/ce/submit?projectKey=ABC | time=1023ms
INFO: ------------------------------------------------------------------------
INFO: EXECUTION FAILURE
INFO: ------------------------------------------------------------------------
INFO: Total time: 54.833s
INFO: Final Memory: 51M/170M
INFO: ------------------------------------------------------------------------
DEBUG: Execution getVersion
DEBUG: Execution stop
ERROR: Error during SonarQube Scanner execution
ERROR: The 'report' parameter is missing
ERROR:
ERROR: Re-run SonarQube Scanner using the -X switch to enable full debug logging.
Process returned exit code 1
The SonarQube Scanner did not complete successfully
Creating a summary markdown file...
Post-processing failed. Exit code: 1
I've struggled the same problem with SonarQube and I've finally found a solution:
You need to restart sonar service after using evaluation token.
Please note this isn't the answer, however I feel this feedback is valuable to getting this question answered.
I can reproduce this issue in POSTMan with a POST request to:
http://localhost:9000/api/ce/submit?projectKey=myProjectKey
This returns
{
"errors": [
{
"msg": "The 'report' parameter is missing"
}
]
}
You can get a similar error by removing the projectKey query parameter. I tried adding a report query parameter and received the same error:
http://localhost:9000/api/ce/submit?projectKey=brian3016&report=report
Given this, I feel there is a problem with their code. It should have included a report parameter when creating the POST request, but it failed to do so.
Verbose output seems to have changed from using the -X switch to /d:sonar.verbose=true. E.G.
SonarScanner.MSBuild.exe begin /k:"myProjectKey" /d:sonar.host.url="http://localhost:9000" /d:sonar.login="myLogin" /d:sonar.verbose=true
Note the verbose logging didn't give me any valuable insight.
(Also note that the documentation currently says to use SonarQube.Scanner.MSBuild.exe, but the verbose logger told me to switch to SonarScanner.MSBuild.exe)
SO...how we we report this issue to someone that can fix it? Their documentation says to go to Stackoverflow. So here we are.
I thought it may have been an issue with a project. So I created a new project with nothing other than the startup template Console Application. Same error.
In my case SonarQube 7.9.1 (deployed with Helm to Kubernetes cluster) was missing temp directory /opt/sonarqube/temp/tc/work/Tomcat/localhost/ROOT after Helm rollback. No idea what happened to it.
Logfile /opt/sonarqube/logs/web.log inside SonarQube pod had this error:
2021.02.02 06:57:03 WARN web[AXdZ6l6MParQCncJACv3][o.s.s.w.ServletRequest] Can't read file part for parameter report
java.io.IOException: The temporary upload location [/opt/sonarqube/temp/tc/work/Tomcat/localhost/ROOT] is not valid
The fix was to exec into pod and create the missing directory. Would like to know the reason though...
The issue is with the sonar service starting up.
First try to stop the SonarStart.bat by using Ctrl+c, and then try to open localhost:9000 ( or whichever port you configured sonar server).
If it is still opening then go to task manager and search for wrapper.exe service and stop the service. If no service is found then go to:
Task manager>Details> and stop all java.exe process.
Note: If you running many Java applications, right-click the java.exe and choose goto service, and stop only those java.exe that belongs to AppX deployment.services
Now start sonarstart.bat as administrator..
today i face the same error when using jenkins to scanner the code.
get the error when POST /api/ce/submit and get 400 code by add the sonar.verbose=true
i use the below step to check reason
first to restart the sonarqube => failed
check the report file size by using "du -sh" get 108m and DB server support 1G => failed
login the sonar-qube server and check the access.log, web.log and another log, finally find the error reason " Processing of multipart/form-data request failed. No space left on device", so i check the server by command "df -h", some devices are used 100% => so i remove some no-using file and fix it!!!
check if you have enough memory
ex: free -m
In my case I had to upgrade memory.
I imported a new code into Xcode and I am getting this error:
Command
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/swiftc
failed with exit code 1.
How do you fix it?
Try cmd+alt+shift+k. This cleans your derived data and might fix the issue.
As far as I know there can be multiple reasons why a compiler fails. Although cmd+alt+shift+k will help most of the time. If this fails, then click on the error message and try to debug it.
For example in the image below, if you read the message, we get to know that, there has been a name duplication. Fixing the name duplication will fix the
So, I got this error message
Started: 9:00:01 AM Error: 2018-01-26 09:33:53.01 Code: 0xC002F210 Source: Run proc SP_MISSING_FILE_CASE_CLOSURE Execute SQL Task Description: Executing the query "begin SP_MISSING_FILE_CASE_CLOSURE; end;" failed with the following error: "ORA-06550: line 0, column 0: PLS-00907: cannot load library unit USAGE.SP_MISSING_FILE_CASE_CLOSURE (referenced by )". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:00:01 AM Finished: 9:33:53 AM Elapsed: 2031.88 seconds. Process Exit Code 1. The step failed.
sometimes, but sometimes my SSIS job runs normally. Can someone provide me with some kind of solution? I cannot see any pattern in it's failure except PROCEDURE which is always the same.
Any help is greatly appreciated.
You should try this syntax (add schema)
begin
execute <schema>.SP_MISSING_FILE_CASE_CLOSURE;
end;
I am running a TFS nightly build that for the last few days has not been able to complete all its tests. It fails after several hours with a "Test run is aborted" message. Previous to this the tests always ran successfully, and no major changes(or even minor) have been made to the system that runs these tests.
Information:
Two MStest runs in the build(unit tests)
Timeout is set to 20 hours
Runs for approx. 15 hours before failure
Tests are set to continue on failure
When I look in the TFS log for the latest run it lists the following(2017-04-11T06:42:47.5500707Z):
[warning]DistributedTests: Test run is aborted. Logging details of the run logs.
[warning]DistributedTests: New test run created.
[warning]Test Run queued for Project Collection Build Service
[warning]DistributedTests: Test discovery started.
[warning]DistributedTests: Test Run Discovery Completed . Test run id: 533
[warning]DistributedTests: 290 test cases discovered.
[warning]DistributedTests: Test execution started. Test run id : 533
[warning]DistributedTests: Test run timed out. Test run id : 533
[warning]DistributedTests: Test run aborted. Test run id: 533
[error]The test run was aborted, failing the task.
When I look at the run log(worker_20170410-234426-utc_864.log) I see:
06:42:47.659516 BaseLogger.LogConsoleMessage(scope.JobId =
7ced7f31-e360-47f3-b334-ef20faeaf000, message = ##[error]The test run
was aborted, failing the task.) 06:42:47.659516
Microsoft.TeamFoundation.DistributedTask.Agent.Common.AgentExecutionTerminationException:
PowerShell script completed with errors. at
Microsoft.TeamFoundation.DistributedTask.Handlers.PowerShellHandler.Execute(ITaskContext
context, CancellationToken cancellationToken) at
Microsoft.TeamFoundation.DistributedTask.Worker.JobRunner.RunTask(ITaskContext
context, TaskWrapper task, CancellationTokenSource tokenSource)
In the test log, I don't see any errors in the VS, just a warning about not able to connect(I see these often):
W, 2060, 5, 2017/04/10, 16:26:03.595, XXXTESTING\QTController.exe,
Test of LoadTestResultConnectString failed: A network-related or
instance-specific error occurred while establishing a connection to
SQL Server. The server was not found or was not accessible. Verify
that the instance name is correct and that SQL Server is configured to
allow remote connections. (provider: SQL Network Interfaces, error: 26
- Error Locating Server/Instance Specified)
I also see an error thrown in the Application Event log at the same time:
The description for Event ID 0 from source Application cannot be
found. Either the component that raises this event is not installed on
your local computer or the installation is corrupted. You can install
or repair the component on the local computer.
If the event originated on another computer, the display information
had to be saved with the event.
The following information was included with the event:
Error Handler Exception: System.ServiceModel.CommunicationException:
There was an error reading from the pipe: The pipe has been ended.
(109, 0x6d). ---> System.IO.IOException: The read operation failed,
see inner exception. ---> System.ServiceModel.CommunicationException:
There was an error reading from the pipe: The pipe has been ended.
(109, 0x6d). ---> System.IO.PipeException: There was an error reading
from the pipe: The pipe has been ended. (109, 0x6d).....
the message resource is present but the message is not found in the
string/message table
The issue is that I really don't know how to interpret these messages, each log just says "test run was aborted, failing the task", I'm not even certain the powershell issue is what caused it. I'm also not sure that the error thrown in the application log is related, though it was thrown at exactly the same time that the run failed.
It's also difficult to research this issue, when you really don't know what's causing the test agent to fail. There are posts related to VS, and to the TFS Test Agent, but these don't strike me as related issues, and of course there is this somewhat unhelpful post about the Powershell message.
Has anyone seen this sort of issue before? I don't think anything on my build server has changed over the last few days(maybe updates...), what do you think would cause an issue like this to occur?
If you look at the failed build(containing tests) after it is aborted in the "Build" section of TFS, its says it was "Aborted", that's it... If you look at results of the build(containing tests) in the "Test" section of TFS it specified that the test run "Exceeded Timeout".
Apparently MSTest was running up against the default value of this little gem. I think it defaults to 8 hours when not specified, but I'm not too sure about this. Anyways I set the following setting in my "Default.testsettings" file:
<?xml version="1.0" encoding="utf-8"?>
<TestSettings name="TestSettings1">
<Execution>
<Timeouts runTimeout="200000000" />
</Execution>
</TestSettings>
Seems to resolve the issue. Tests runs successfully and no longer time out.
I am getting following error while running following pig script
REGISTER /opt/cloudera/parcels/CDH/lib/pig/lib/avro.jar
REGISTER /opt/cloudera/parcels/CDH/lib/pig/lib/json-simple-1.1.jar
REGISTER /opt/cloudera/parcels/CDH/lib/pig/lib/jackson-core-asl-1.8.8.jar
REGISTER /opt/cloudera/parcels/CDH/lib/pig/lib/jackson-mapper-asl-1.8.8.jar
REGISTER /opt/cloudera/parcels/CDH/lib/pig/piggybank.jar
list_cookies = LOAD '/user/xyz/testbed/llama-2014-Oct-12d/abc'
USING org.apache.pig.piggybank.storage.avro.AvroStorage();
got following error
2014-10-22 11:51:14,705 [main] ERROR org.apache.pig.tools.grunt.Grunt - ERROR 2245: Cannot get schema from loadFunc org.apache.pig.builtin.AvroStorage
Details at logfile: /home/xyz/pig_1413991623605.log
In my case, it was simply the fact that the input folder did not exist. Pig error messages are off the mark and not at all helpful. After changing the input folder to one that existed, this error went away. So, be sure to check that before spending a lot of time more difficult debugging!