I have the code below to convert a track in iTunes but when it is trying to get the location of the converted track it errors:
tell application "iTunes"
set theFiles to the selection
repeat with theTrack in theFiles
with timeout of 120 seconds
set finish of theTrack to 30
set theSecondTrack to first item of {convert theTrack}
set theSecondPath to location of theSecondTrack
say "RingtoneDude has converted the song."
Error:
error "Can’t get location of {file track id 3942 of library playlist
id 2208 of source id 65 of application \"iTunes\"}." number -1728 from
«class pLoc» of {«class cFlT» id 3942 of «class cLiP» id 2208 of
«class cSrc» id 65}
Unfortunately you´ve misunderstood what location does. Revealing iTunes tracks in Finder is actually quite a bit more complicated but luckily has already been done by Doug Adams, as explained in this article.
You should definitely check out the rest of dougscripts.com as he has already created a script (for what I assume is your goal) called "make ringable" and released it under GNU GPL here
=== EDIT:
Oops, I´m sorry, looks like location does work, just not how I expected, try the following with one file selected:
tell application "iTunes"
tell item 1 of the selection to set theLocation to {get location}
tell application "Finder" to reveal theLocation
end tell
Related
I have a script that downloads a report from an online service, waits a specified amount of time e.g. 30secs for the file to actually download and then renames the file. The script then repeats
What I would like to do is instead of putting a static delay in the script, to create a trigger that looks for the new file and once it appears triggers the renaming portion of the script.
The downloaded file name is constant.
The current portion of the script looks like this
`
tell application "Finder" to activate
tell application "System Events"
delay Wait_Time
key code 125
tell application "Finder"
set name of (selection as alias) to (the clipboard)
end tell
end tell
ultimately what I would like is to replace the delay Wait_Time with a something like:
repeat until file name found
Search Folder for "file name"
end repeat
select new file
rename new file to clipboard
obviously this wont work but it kind of captures my logic.
I have also tried a few other possible solutions but Im new to AppleScript and not overly confident that these approaches are suitable for my application.
The below is an example of a solution I have tried. This is just an example and im not sure if this particular code can even get me to where I need to be. I thought I would include it to show just how lost I am.
set excludes to {"Folder", "Application"}
tell application "Finder"
set search_folder to folder "Macintosh HD:Users:XXXXXXXX:Library:CloudStorage:OneDrive-Flinders:Flinders Connect Stats:Source Stats:Cisco Finesse:Agent State Summary by Interval Report"
set foundItems to (every item in search_folder whose name contains "Agent State Summary by Interval Report" and kind is not in excludes) as alias list
if foundItems is {} then return
repeat with once from 1 to 100
try
if (count of foundItems) = 1 then
tell application "Finder" to activate
tell application "System Events"
key code 125
tell application "Finder"
set name of (selection as alias) to (the clipboard)
end tell
end tell
exit repeat
end if
end try
end repeat
return
end tell
Im sure you can see I have no idea what im doing.
Anyway any help would be awesome!
I have found a solution... if anyone has ideas for improvement please let me know.
tell application "Finder" to activate
tell application "System Events"
repeat until (exists (files of folder folderPath whose name contains "Agent State Summary by Interval Report"))
delay 1
end repeat
end tell
tell application "System Events"
key code 125
tell application "Finder"
set name of (selection as alias) to (the clipboard)
end tell
end tell
end repeat
say "Finished!"
display dialog "Completed"
The original solution was found here AppleScript: How to repeat a search for a file until it is found?
I'd like an easy way to switch from a Spotify release to the same release in Apple Music.
I already found a way to search for the currently playing Spotify track in the Apple Music web player with Applescript:
tell application "Spotify"
if player state is not stopped then
set currentArtist to artist of current track as string
set currentTrack to name of current track as string
open location "https://music.apple.com/search?term=" & currentArtist & " " & currentTrack
end if
end tell
I'd love to:
Open the search in the native Music.app, not the web player. Is this supported?
Ideally not do a search, but go straight to the same release. Maybe with ISRC codes?
Take any selected Spotify track, not just the currently playing one. Looking at the Spotify Applescript dictionary tells me this in not possible.
had a similar problem right now and quickly hacked it out. In my case I want to simply trigger a search on the Music app.
Opened Automator and created a new "Service".
Workflow receives current > "Text" > in "every application".
Here's the AppleScript:
on run {input, parameters}
tell application "Music"
activate
end tell
tell application "System Events"
tell process "Music"
set window_name to name of front window
set value of text field 1 of UI element 1 of row 1 of outline 1 of splitter group 1 of window window_name to input
keystroke ""
key code 36
end tell
end tell
return input
end run
I saved it as "Find on Music" in Automator and now I can select text, right click > Service > Find on Music and Music plops open and shows me the results for the selected text. I hope you can use some parts of it.
I just figured out how to pass text from wherever to the search field in Music, with help from daemon's answer, which no longer works. This should work for what you want to do in conjunction with what you have.
Replace your "open location" line with a variable name for your concatenated string. Add this code below yours and pass that variable in place of 'input' (in my case 'input' is text from any application, which I use to select text of an artist name in an email/webpage/message that I want to send to Music's search).
First it checks to see if the main Music window is open vs the MiniPlayer, and open it if not to enable search via cmd-O, the cmd-F to find, then passes the input and hits return:
tell application "Music"
activate
end tell
tell application "System Events"
if not (exists (window "Music" of process "Music")) then
tell process "Music"
keystroke "0" using command down
end tell
end if
tell process "Music"
keystroke "f" using command down
keystroke input
key code 36
end tell
end tell
So, something like this (I don't have Spotify to check that section, but this should work assuming your code there is correct):
tell application "Spotify"
if player state is not stopped then
set currentArtist to artist of current track as string
set currentTrack to name of current track as string
set spotTrack to currentArtist & " " & currentTrack
end if
end tell
tell application "Music"
activate
end tell
tell application "System Events"
if not (exists (window "Music" of process "Music")) then
tell process "Music"
keystroke "0" using command down
end tell
end if
tell process "Music"
keystroke "f" using command down
keystroke spotTrack
key code 36
end tell
end tell
The only thing I couldn't figure out is how to check if the search field is already in focus, because if it is, the cmd-F causes a system alert sound. Generally not an issue as typically you'll search and interact with something else before running this script again, so calling it good. :)
I have a number of movies in my iTunes 12.7.3.46 library on my Mac Mini. I have manually added album art to each video, but only about half the movies actually show the album art when viewing the movies from my AppleTV. The other half of the movies just show a frame. I double checked Get Info for the movies that aren't displayed the album art and confirmed that the album art is listed. Once I do this, the AppleTV will display the album art. I would like to write an applescript that I can run that will basically automatically do a "Get Info" for each movie so the art will display. Here is what I have so far:
tell application "iTunes"
set MovieList to tracks of playlist "Movies"
repeat with x from 1 to count of MovieList
tell (item x of MovieList)
refresh MovieList
end tell
end repeat
end tell
I saved the script here: /Library/iTunes/Scripts/Refresh.scpt
When I try to run this in iTunes (inside iTunes, there is a Scripts menu (an icon of a scroll, just left of Help), I get:
{«class cFlT» id 55680 of «class cUsP» id 55668 of «class cSrc» id 66 of application "iTunes", «class cFlT» id 56396 of «class cUsP» id 55668 of «class cSrc» id 66 of application "iTunes", «class cFlT» id 56395 of «class cUsP» id 55668 of «class cSrc» id
I don't even know what that means....any idea where to go from here?
This work for me using the latest version of Sierra
tell application "iTunes"
set theTracks to tracks of playlist "Movies"
repeat with i from 1 to number of items in theTracks
set this_item to item i of theTracks
try
refresh this_item
end try
end repeat
end tell
I have a script that iterates through tracks in a playlist. If they are already mp3 it adds them to my iPod (duplicate currentTrack to ipod_lib) and removes them from the playlist - this part works fine. If they are lossless however, I want to convert them to mp3 and add them to my iPod instead of add the lossless files themselves since they are too large. The line duplicate convertedTrack to ipod_lib throws the following error...
error "iTunes got an error: Can’t set library playlist id 270897 of source id 235166 to {file track id 322339 of library playlist id 38702 of source id 68}." number -10006 from library playlist id 270897 of source id 235166
the locateiPods code is pulled from a script on http://dougscripts.com/
Really not sure what I'm doing wrong here...
on locateiPods()
set the volumes_directory to "/Volumes/" as POSIX file as alias
set the volume_names to list folder volumes_directory without invisibles
set mounted_iPods to {}
repeat with i from 1 to the count of volume_names
try
set this_name to item i of volume_names
set this_disk to ("/Volumes/" & this_name & "/") as POSIX file as alias
set these_items to list folder this_disk
if "iPod_Control" is in these_items then
set the end of the mounted_iPods to this_disk
end if
end try
end repeat
-- check for iPod count
if the mounted_iPods is {} then
--
try
display dialog "iPod is not mounted." buttons {"Cancel"} with icon 0 giving up after 15
on error
error number -128
end try
else if the (count of the mounted_iPods) is greater than 1 then
-- choose iPod
set the ipod_names to {}
repeat with i from 1 to the count of the mounted_iPods
set this_iPod to item i of the mounted_iPods
tell application "Finder"
set the end of the ipod_names to the name of this_iPod
end tell
end repeat
tell application "iTunes"
activate
set this_name to (choose from list ipod_names with prompt "Pick the iPod to use:") as string
end tell
if this_name is "false" then error number -128
repeat with i from 1 to the count of the ipod_names
if item i of the ipod_names is this_name then
set this_iPod to item i of the mounted_iPods
exit repeat
end if
end repeat
else
set this_iPod to item 1 of the mounted_iPods
end if
return this_iPod
end locateiPods
tell application "iTunes"
set allTracks to every track in user playlist "TEST"
set the_iPod to my locateiPods() -- this is a path
set the_iPod_name to text 1 thru -2 of (the_iPod as string)
set ipod_src to some source whose name is the_iPod_name
set ipod_lib to library playlist 1 of ipod_src
repeat with i from 1 to count of allTracks
set currentTrack to item i of allTracks
set fileType to kind of currentTrack as string
if fileType is "MPEG audio file" then
duplicate currentTrack to ipod_lib
tell playlist "TEST" to delete contents of currentTrack
end if
if fileType is "Apple Lossless audio file" then
set convertedTrack to convert currentTrack
duplicate convertedTrack to ipod_lib
end if
end repeat
end tell
It seems doing the following makes it work, which suggests that convertedTrack is not of type track???
set convertedTrack to convert currentTrack
repeat with theTrack in convertedTrack
duplicate theTrack to ipod_lib
end repeat
I always used "convert" for list of tracks and then result is list of tracks. by the way it is much faster to convert list of tracks instead of doing loop to convert each track. May be you should do first a select of all tracks whose kind is lossless.
About convert, also keep in mind that convert does the conversion to the format set in your iTunes preferences. Then your scrip will depend of these preferences. I suggest, to be more safe, to save current preference, set the convert mode to format you want MP3, and then reset preferences to what they were before. You can use bellow script:
-- get & save current encoder
tell application "iTunes" to set Encoder_Base to name of current encoder
-- change encoder to MP3
tell application "iTunes" to set current encoder to (get first encoder whose name contains "MP3")
Also, may be you can optimise your iPod subroutine using Source method instead of looking for volumes mounted. iTunes kind of source provides an efficient way:
-- kind of source could be : library, iPod, audio CD, MP3 CD, radio tuner, shared library, iTunes Store
tell application "iTunes"
set myList to every source whose kind is iPod
if myList is {} then
display alert "no ipod connected"
return
else -- I assume if one iPod found, there is only 1 connected !!
set SourceName to name of first item of myList
set SourceID to id of first item of myList
end if
end tell
I hope it helps.
I am using iTunes to convert a large .aif file to a much smaller .mp3 file. The filename changes each day because I am adding the date to the name. So, a file named "abcxyz 2-2-2014" gets converted in iTunes. After the conversion, I want to delete it from iTunes. I'm trying to use Applescript to search for the file and delete it. I'm trying this:
on deleteTrack(trackName)
tell application "iTunes"
set theTrack to track named trackName of playlist "Library"
set songFile to location of theTrack
delete theTrack
end tell
tell application "Finder" to delete songFile
end deleteTrack
on run
tell application "iTunes"
set result to (file tracks whose name contains "abcxyz")
repeat with t in result
deleteTrack(name of t as string)
end repeat
end tell
end run
I found the deleteTrack routine which works perfectly if you pass it a string like this:
on run
deleteTrack("abcxyz 2-2-2014")
end run
But that requires that I know the exact name of the track, which I don't. The error that I get is "Can't continue deleteTrack" ..with the deleteTrack(name of t as string) line selected in Applescript Editor.
Thanks for any help.
You should re-read the material about AppleScript's handlers. Because your handler call is inside of a tell application "iTunes" block, AppleScript is looking in iTunes for deleteTrack. Try this instead:
my deleteTrack(name of t as string)