I recently had to reinstall the OS on my dev box and I am now in the process of reinstalling various applications. I had previously installed the WP7 SDK without any problems but unfortunately I'm having problems this time around. The only project type I have available in the Silverlight for Windows Phone category is one that I downloaded from the online templates section.
When I try to open it or any of the WP7 projects I created previously I get a "The project type is not supported by this installation." error. I am not sure what I am missing. I have followed the three steps listed here so I've installed the SDK, the Dev Tools and the Dev Tools fix. The installation of VS2010 itself seems to be fine as I can create ASP.NET and Silverlight applications and run them without any problems.
Has anyone encountered something like this before?
Edit: I have installed Service Pack 1 for VS 2010 but that hasn't helped unfortunately.
Edit: I have also re-installed the Windows Phone Dev Tools and that installation reported no errors but I still get no projects under the Silverlight for Windows Phone category.
Try opening a visual studio command prompt and typing:
devenv /ResetSkipPkgs
I have thankfully resolved this. Last night I uninstalled everything and reinstalled again but this time I made sure to right-click on each executable and select "Run as administrator". That seems to have done the trick as my existing WP7 projects are compiling and running successfully and I can create new ones too. I did run into two error messages however -
"Zune software is not launched. Retry after making sure that Zune software is launched". I got around this initially by setting the target to Windows Phone 7 Emulator instead of Windows Phone 7 Device in the target dropdown on the main toolbar.
"Error: Connection failed because of invalid command-line arguments." I got around this by rebooting as mentioned here.
Related
So many things happened that I don't know where to start. Seriously, shouldn't this be simpler?
Edit: Someone here knows how can I contact Microsoft to tell this? Or even, can someone tell them about this problem?
I have the last Windows 10 desktop and also have Windows Phone 10.0.10512.1000. I installed Visual Studio 2015 with tools for Universal Apps development (and also 8.1). I have a Lumia 730.
So I connected my phone with my USB cable. Everything fine, the phone gets recognized and I can navigate through the folders.
Then I started Visual Studio 2015 and created a blank universal app. Compiled and tried to deploy. Now this is happening to me: Visual Studio hangs for some moments. Eventually I get an error telling that the device was not found (DEP6200).
I already tried dozens of solutions:
disconnecting from wifi in my laptop and my phone
restarting the IpOverUsbSvc service
rebooting the computer and the phone
deleting the devices in the Device Manager
Registering and Unregistering the phone (it sometimes works)
All of the above with the phone screen unlocked
disabling Hyper-V
disabling firewall
Other solutions that failed miserably
I also tried to use that Windows Phone Developer Power Tools. When I try to use it, it asks me to install some "Phone Tools Update Pack", but when I try, it says that the operation didn't succeed, and also shows the NRE message string (object reference not set to an instance of an object).
I can go through the phone's folders without any problem. I tried to reinstall the drivers... i tried everything.
It's quite sad.
Do you guys can think of some more thing to check?
EDIT: I tested this app before doing all this: https://blogs.windows.com/buildingapps/2015/07/09/just-released-windows-10-application-deployment-tool/
And it worked. If that's the case, is Windows Phone 10 deployment over Visual Studio working already or we have to wait some more time?
Edit2: After making some changes to my app manifest and choosing "ARM" config, now I get this:
1>Deploying to SD Card...
1>Updating the layout...
1>Copying files: Total <1 mb to layout...
1>Checking whether required frameworks are installed...
1>Framework: Microsoft.NET.CoreRuntime.1.0/ARM, app package version 1.0.23117.0 is not currently installed.
1>Framework: Microsoft.VCLibs.140.00.Debug/ARM, app package version 14.0.23019.0 is not currently installed.
1>Installing missing frameworks...
But it just stays there. It's stuck, and it stays there forever. At least I got some info... Its more or less the same steps that WinAppDeployCmd does, but the command line app does it successfully.
Somehow the problem got solved. I created a brand new project and did this:
1 - In your phone, try disabling the developer mode on your phone. What an unexpected development!
2 - Disable the "phone discovery" thingy. I don't know the name of this configuration in english (as my phone is in Portuguese). Just in case.
3 - Choose the correct architecture. This is obvious, right? In my case, ARM. If you try deploying with x86 or x64, it should give you an error. For me, it didn't.
From now on, you should be able to deploy your apps in both developer mode and non-developer mode. It just works, somehow. And it might NOT work for you, sorry. I think I got lucky.
It worked even after a reboot. So the solution is "pretty solid" (in an universe where gelatine is pretty solid).
I had the same problem. I tried the fix of the comment and went to devices manager.
Under USB-Devices there were three Lumia 920s listed.
I selected the second one and clicked on uninstall.
At the end it asked me to restart the Computer. I clicked on NO.
(When I uninstalled the first or third one, it didn't ask me that).
Then the error disappeared (now another common one appears (HRESULT: 0x80073CF6))
I have a Lumia 950 xl, with windows 10 installed, anniversary version. I had the same problem, and my solution was to turn on 'Device discovery' and 'Device Portal', and also keep the 'Developer mode' on.
I believe the only necessary option was the 'Device discovery' though!
Just in case someone still runs into this issue, I had something very similar with my Visual Studio 2015 professional update 1 but I couldn't even deploy to an emulator.
The issue has gone after I upgraded to Visual Studio 2013 update 3.
I had the same issues on Windows 10 with Visual Studio 2015. I updated the the UWP SDK to Anniversary Edition Build 14393, set the target framework to this and it worked. I guess the incompatibility between the device version and sdk version was not allowing the device to be discovered by Visual Studio.
I've recently upgraded my OS to Windows 10. I have a very basic Silverlight 5 application which gives me Unable to start Debugging. The Silverlight Developer Runtime Not Installed. Please Installed a matching version error in VS 2010 whenever I am trying to run the project.
I have :
Target Silverlight version is set to Silverlight 5 in web project.
I have installed Silverlight SDK, Silverlight5_Tools with SP1 installed & Silverlight Runtime which is 64-bit.
After doing all these steps and going through many online posts, still I'm unable to resolve this issue.
My Doubts are :
Do the Windows 10 upgrade has anything to do with this situation?
Windows 10 comes with a new browser Edge, is this because of this browser? Like Silverlight compability.
Again I am not sure but these are my doubt. Any suggestions?
Do you have a 64 bit OS ?
If so - uninstall Silverlight (developer!) and make sure you install the silverlight.exe (developer!) not the 64 bit version.
That worked for me.
HTH
Go to the properties of the Web folder start project. Click Web on the left tab. Unclick Silverlight in the debuggers.
Not a total solution but at least it allows you to debug other portions.
I had this issue and Uninstalling and Reinstalling didn't work.
Error in debug mode (F5 Debug solution configuration) was "Unable to start debugging. The Silverlight Developer Runtime is not installed"
In Debug configuration I would get the above error but finally I put the solution into release mode and it worked - then back to debug mode and everything worked without error.
Seems like a really odd fix but sure enough closing and re-opening the solution everything works now - Same install procedure as OP.
Another thing that's interesting is, the Debug only works in Chrome. If I target IE or edge I still get "Unable to start debugging. The Silverlight Developer Runtime is not installed"
I uninstalled Silverlight and then installed Silverlight_Developer.exe. I also switched default browser in Visual Studio to Internet Explorer (I have Edge otherwise which won't work...).
Nice to see some more people also using Silverlight these days, hehehe.
This is a really old thread, but I just ran into this issue with a project. I was getting the message that the Developer runtime was not installed, but in fact it was, and another similar project ran just fine on the same machine with the same version of VS 2015.
The fix was to ensure that the startup project is the WEB project, not the Silverlight project. Somehow, the default startup project got switched to the SL project. After I switched back, then it worked just fine.
I recently, upgraded to Windows 10 and got Visual Studio 2015 Community hoping to build UWP apps and ASP.Net 5 apps. At first, I installed everything, but ended up skipping / canceling the Windows 8.1 / 10 mobile emulators (my PC can't even run them). After everything was installed, I went to create a new UWP app (C#), and got this error:
Next, I try the same thing, but with JavaScript. It works perfectly! on the same UAP 10.0.0.0 that is supposedly missing. The link it provides is completely useless (it sends me to http:/microsoft.com/en-us) -_-. Oddly, this only happens when I try to use C# or VB.Net, JavaScript UWP apps seem to work fine. What is going on here? Where can I find the real link to the SDK I need?
UPDATE
JavaScript UWP apps will be create just fine, but when I attempt to build, I get:
Error "10.0.0.0" is not a supported value forTargetPlatformVersion.
Please change it on the Project Property page. Test
C:\Program Files (x86) \MSBuild\Microsoft\VisualStudio\v14.\JavaScript\Microsoft.VisualStudio.JavaScript.UAP.targets
This is the download link for the standalone SDK, maybe reinstalling the sdk will fix the problem.
https://dev.windows.com/en-us/downloads/windows-10-sdk
Normally you don't always have to reinstall visual studio when something goes wrong because it takes a lot of time to reinstall again. From your question you skipped/cancel that feature, the first thing to do is go to the control panel and double click on visual studio under programs to Modify the software and enable those features.
In the case, visual studio was working properly before but due to some updates it stopped, go to control panel right click the visual studio version you have under programs to repair.
If the above doesn't work try to reinstall it again. I hope this helps.
Recently, I needed to refresh my Windows 8.1 PC, and now that I have finally finished getting all of my programs reinstalled and everything is back to normal, I am ready to finish work on my Windows 8.1 app, but I am having an issue with compiling my apps. Every time I try to compile, I get the following error.
Now normally when I need to refresh my developer licesnse, Visual Studio tells me, but this time I didn't get any prompt at all, and that is the error that I got when trying to compile. How can I fix this? I am installing updates for Visual STudio at the moment, and I am hoping that doing so will somehow magically fix the problem, but I am also aware that it probably won't.
EDIT: Now that I have updated, the message has been shortened to "Can't resolve Windows.metadata."
For some reason, even though the Windows 8.1 SDK is supposed to be installed with Visual Studio Ultimate 2013, it wasn't for me. I was able to find the Windows 8.1 SDK by Googling it, and it came up as the top result. I installed it, and suddenly all of my errors went away and Visual Studio started recognizing them as legitimate Windows 8.1 app code.
I can't deploy applications to to my Windows Phone 8 device from Visual Studio Express 2012 anymore. I always get the following two lines in the console:
Deployment of application to device failed.
The interface is unknown.
The emulator also does not work anymore (xde.exe just crashes). All that worked once (Hyper-V is active).
All that happened without a change to my app (the same happens with a fresh hello world app).
The problem is not my phone, I tested a different phone (even different model), same problem.
I already completely removed and reinstalled the Phone SDK including Visual Studio.
The problem might have occurred since I updated to Windows 8.1 but I am not sure about this.
If anybody has a clue of what is going on here I would highly appreciate your help.
Since you've already tried removing/reinstalling VS and SDK, try creating a new user account on your Win8.1 box and running VS from that. If it works, the problem was probably some settings in CurrentUser registry hive, which Remove doesn't always clean up. Reinstall the already-installed VS and SDK may work better.
The 'interface' error means this is likely some COM issue, and that implicates registry. If you can figure out which DLL contains the interface, you may be able to fix it with (admin command line) > REGSVR32 <dllPath>. You can trace the registry accesses being made when you try to debug the app via SystemInternals ProcessMonitor