Recently, whenever I change something in my code, rebuild, and attempt to debug, I get the error "This breakpoint will not currently be hit, No symbols have been loaded for this document."
But then as soon as I restart my computer, everything is fine and I can debug properly. Why is this happening? It's really frustrating having to restart my desktop every time I try to debug my code. I've looked all over stack overflow and MSDN and can't find any solution to my particular problem. Any help is appreciated
"This breakpoint will not currently be hit, No symbols have been loaded
for this document."
(As for this error message, it's common error which has different causes. I can't give the most direct correct answer for this issue, I can only give you some tips for trouble-shooting. In order to avoid losing contact in the round-trip comments, I post those content as answer instead of comments.)
Since VS2015 have been released for long time, I would think this issue is a particular one, not found similar issues online.
First of all, please create a new simple project to check if this issue occurs in new project when debugging.
If it persists in new project, I think this issue has something to do outside environment like VS settings, VS config files or Debug options.
You can try:
1.Go Tools=>Import and Export Settings=>Reset all settings =>No,just reset settings=>Finish
2.Repair VS IDE since it seems to work well in the past, and just got the issue recently, so maybe something is broken for your IDE(In Control Panel find VS2015, right-click=>change=>repair). Also, make sure you have the latest VS2015 Update3 instead of earlier versions.
And if it works well in new project, then maybe the issue is about the whole project or solution itself. You can try:
1.Navigate to solution folder, close all vs instance, delete the .vs, bin and obj folders and restart VS to check if it helps.
2.Make sure you've loaded the required symbols, check the content in your Modules window during debugging, there's possibility you don't load necessary symbols successfully.
3.Check the output folder after your rebuild, check in folder like bin\debug folder if you have both the .exe and .pdb files. And make sure the .exe and .pdb files are up-to-date after your rebuild by checking their Date Modified.
Hope it helps and more info about the project type, dependencies would be better:)
When I debug my project, I get following error:
"Unable to copy file "obj\Debug\My Dream.exe" to "bin\Debug\My Dream.exe". The process cannot access the file 'bin\Debug\My Dream.exe' because it is being used by another process."
Using Process Explorer, I see that MyApplication.exe was out but System process still uses it although I stopped debug before.
Whenever I change my code and start debug it is going to happen. If I copy project to USB and debug, it runs OK.
Why? How can I fix this error?
I use Window 7 Professional. With Xp I have never got this error.
Ugh, this is an old problem, something that still pops up in Visual Studio once in a while. It's bitten me a couple of times and I've lost hours restarting and fighting with VS. I'm sure it's been discussed here on SO more than once. It's also been talked about on the MSDN forums. There isn't an actual solution, but there are a couple of workarounds. Start researching here.
What's happening is that VS is acquiring a lock on a file and then not releasing it. Ironically, that lock prevents VS itself from deleting the file so that it can recreate it when you rebuild the application. The only apparent solution is to close and restart VS so that it will release the lock on the file.
My original workaround was opening up the bin/Debug folder and renaming the executable. You can't delete it if it's locked, but you can rename it. So you can just add a number to the end or something, which allows you to keep working without having to close all of your windows and wait for VS to restart. Some people have even automated this using a pre-build event to append a random string to the end of the old output filename. Yes, this is a giant hack, but this problem gets so frustrating and debilitating that you'll do anything.
I've later learned, after a bit more experimentation, that the problem seems to only crop up when you build the project with one of the designers open. So, the solution that has worked for me long term and prevented me from ever dealing with one of those silly errors again is making sure that I always close all designer windows before building a WinForms project. Yes, this too is somewhat inconvenient, but it sure beats the pants off having to restart VS twice an hour or more.
I assume this applies to WPF, too, although I don't use it and haven't personally experienced the problem there.
I also haven't yet tried reproducing it on VS 2012 RC. I don't know if it's been fixed there yet or not. But my experience so far has been that it still manages to pop up even after Microsoft has claimed to have fixed it. It's still there in VS 2010 SP1. I'm not saying their programmers are idiots who don't know what they're doing, of course. I figure there are just multiple causes for the bug and/or that it's very difficult to reproduce reliably in a laboratory. That's the same reason I haven't personally filed any bug reports on it (although I've +1'ed other peoples), because I can't seem to reliably reproduce it, rather like the Abominable Snowman.
<end rant that is directed at no one in particular>
I've had this error crop up on me before, even in Visual Studio 2008. It came back and more prevalent in Visual Studio 2012.
Here is what I do.
Paste this in the troublesome project's pre-build event:
if exist "$(TargetPath).locked" del "$(TargetPath).locked"
if exist "$(TargetPath)" if not exist "$(TargetPath).locked" move "$(TargetPath)" "$(TargetPath).locked"
Computer (right-click) -> manage -> Service & Application -> service -> Enable Application experience
Worked For me!
I had the same issue in Visual Studio 2013. I'm not sure what caused this for my project, but I was able to fix it by cleaning the solution and rebuilding it.
Build > Clean Solution
Build > Rebuild Solution
I understand this is an old question. Unfortunately I was facing the same issue with my .net core 2.0 application in visual studio 2017. So, I thought of sharing the solution which worked for me. Before this solution I had tried the below steps.
Restarted visual studio
Closed all the application
Clean my solution and rebuild
None of the above steps didn't fix the issue.
And then I opened my Task Manager and selected dotnet process and then clicked End task button. Later I opened my Visual Studio and everything was working fine.
At least in my case I've noticed that visual studio 2012 was creating at least two msbuild.exe ghost processes, which did not perish after build. These zombies apparently are causing file locks to appear.
Killing msbuild.exe's is one time solution, it needs to be done per build basis.
But then I've figure out that I could disable parallel build once and for all - went into Tools > Options > Projects and Solutions > Build and Run > "maximum numbers of parallel project builds" - by default it has value of 8, I've switched to 1. Works like charm.
Of course builds are bit slower now, but better safe than sorry.
At least for this particular small project I did not need more than one build thread.
See my answer here if you're having this problem while running unit tests. Answer copied below:
Building upon Sébastien's answer, I added a pre-build step to my test
project to automatically kill any vstest.* executables still
running. The following pre-build command worked for me:
taskkill /f /im vstest.*
exit 0
The exit 0 command is at the end to prevent build failure when there
are no vstest.* executables running.
I solved this problem..
near the debug you see drop down menu with some configuration. Default there was Any CPU. Select x86 and run the program it will work. If x86 not there go to configuration manager and add the x86
Recently I've been in a trouble with Visual Studio 2012 with same error description: "The process cannot access the file because it is being used by another process..."
To fix this first of all you need to understand the application which still use it. I've shutdown all processes like "MSBuild" and "MSBuild host". But this is not enough. If you have installed "Code Contracts" and turned on then it sometimes takes your DLLs for checking and hanging up on this operation.
So, you need to stop all processes of "CCCheck.exe" and that's all.
Finally, to understand that process is using your DLL you always may try to just Delete "obj" folder in your File Manager and this operation will fail, you may see the "Message Window" with description of the hanging operation. Also, as a variant, you can try to use "Sys Internals Suite" application.
Worked for me.
Task Manager -> Name of project -> End task. (i had 3 same processes with my project name);
VS 2013; Win 8;
Make sure that any previous run of the application (for example, start without debugging option) is actually stopped. I was working on a WPF application, started without debugging and had it minimized when I kept getting the error. After closing the application VS behavior got back to normal.
I have been plagued by this issue in Visual Studio 2017. It started about two or three weeks ago, and has severely eaten into my productivity. Clean and Rebulid haven't worked; even restarting my machine doesn't do the job.
One way to deal with the issue is to clean the offending assembly, and to build (as opposed to rebuild) the project you want to run immediately afterwards. This works about 30% of the time.
However, probably the most reliable solution I've found is to open a Developer Command Prompt, and use msbuild directly. I've been doing this for the last three days, and so far the problem hasn't happened once.
In my case was that I have enable "Show All Files".
Visual Studio 2017
Run taskmanager.
Locate netcore and delete it.
You can then delete the file manually or by running Clean.
This is pure speculation, and not an answer.
However, I have been having this problem for a while.
I came after a time to suspect an interaction between VS and my AV precautions.
After some playing, it seems that it may have gone away when I modified my antivirus so that everything under the
C:\Users[username]\AppData\Local\Microsoft\VisualStudio\10.0\ProjectAssemblies
folder was not included in the real-time protection.
It looks as if the build actually writes the DLL here first, then copies it to the final build location.
It could be too late. But, I encountered similar problem and in my case the project had self reference. Hence, deleting it from the References worked like a charm!!!
I've found the quickest way without closing forms or restarting VisualStudio is go to the project's compile page and click "Advanced Compile Options..." button. Then make any change to one of the options (say, changing Generate Debug Info from Full to pdb-only), then click OK.
It works every time and will have to do until MS fixes this bug (I've never had this problem until I switched from VS2012 to VS2013)
Another note, if you can't clean the project or solution, it won't build. The files are definitely locked by VS (not a antivirus problem, at least not in my case)
I tried all these suggestions as well as other suggestions found elsewhere and the only thing that worked for me was restarting my computer. Then I did a clean solution followed by rebuilding. I am using Visual Studio 2013 for reference.
I have run to this same issue, and what I found is there are actually running mulitple Windows form application in the background. It happens when your application has two forms and you close the 2nd form which is not your main form so the application will not totally exited.
I usually run my application
through its exe or
run without debugging
Solution is close the other instance of Windows form application.
This is one way to always close your application instance.
Pre build command
(if exist "$(TargetDir)*old.pdb" del "$(TargetDir)*old.pdb") & (if exist "$(TargetDir)*.pdb" ren "$(TargetDir)*.pdb" *.old.pdb)
Helped
[Solved] Error: Cannot access file bin/Debug/… because it is being used by another process:
I am approaching that you get this error while you was trying to run two windows form one after another such as first loading a form then after sometimes it will automatically disappear and the second form loaded onto the screen.
Basically, you need to close your first form which is running in the background and the main reason behind this error.
To close the first form you have to add these two lines of code in the second form load event handler.
Form1 form = new Form1();
form.Close();
This will solve the error perfectly.
One simple solution is you go to bin\Debug folder, delete all the files in that folder, then rebuild. If it doesn't work, close Visual Studio then go to bin\Debug folder using file explorer, on the left coner, click on File> Open Command Prompt> Open Command Prompt as Administrator > Enter this command "DEL /F /Q /A *" > then rebuild
i found Cody Gray 's answer partially helpful, in that it did direct me to the real source of my problem which some of you may also be experiencing: visual studio's test execution stays open by default and maintains a lock on the files.
To stop that predominantly useless behaviour, follow the instructions from https://connect.microsoft.com/VisualStudio/feedback/details/771994/vstest-executionengine-x86-exe-32-bit-not-closing-vs2012-11-0-50727-1-rtmrel
Uncheck Test menu -> Test Settings -> "Keep Test Execution Engine Running"
My problem was dotnet got hung up and whenever VS would try to make a new dll, or access an old one, the dotnet process would latch onto the dll and stop visual studio from cloning the dll. Solution is just to end all dotnet tasks in task manager(it will only actually remove the dead one, if you are trying to end one and it won't shut down, that means it's working).
Close VisualStudio, ctrl-alt-delete, select Task Manager, find and end all MSBuild processes - VisualStudio basically has a pretty severe bug where it loses control of its debugger and the debugger maintains a lock on the .pdb file in the debug/bin folder. After you end all the MSBuild (debugger) processes, delete the /debug/bin folder and reopen your solution in Visual Studio. You're good to go now. Microsoft needs to fix this crap.
I have opened a separate question regarding VS 2017 that had a similar behavior after one update. The problem seemed to be generated by the antivirus program although.
I have added the bin folder to the antivirus exclude list, restarted the machine and now it seems to work.
I have faced the same issue, but none of the answers above helped me! I just simply closed my Visual Studio 2017 then re-run it, and It worked!
I've tried every answered here and this worked for me
Close your Project.
Stop running tasks in task manager
Restart your pc
Open and build project again
it worked for me.
I got this error because I was running my solution, but not in debug mode. I had forgotten this. I realized it and stopped my solution from running. This cleared up the issue.
Another kludge, ugh, but it's easy and works for me in VS 2013. Click on the project. In the properties panel should be an entry named Project File with a value
(your project name).vbproj
Change the project name - such as adding an -01 to the end. The original .zip file that was locked is still there, but no longer referenced ... so your work can continue. Next time the computer is rebooted, that lock disappears and you can delete the errant file.
I set a breakpoint in my code in Visual-C++, but when I run, I see the error mentioned in the title.
I know this question has been asked before on Stack Overflow (Breakpoints cannot be set and have been disabled), but none of the answers there fully explained the problem I'm seeing. The closest I can see is something about the linker, but I don't understand that - so if someone could explain in more detail that would be great.
In my case, I have 2 projects in Visual C++ - the production dsw, and the test code dsw. I have loaded and rebuilt both dsws in debug mode. I want a breakpoint in the production code, which is run via the test scripts. My issue is I get the error message when I run the test code, because the break point is in the production code, which isn't loaded up when the test starts.
Near the beginning of the test script there is a mytest_initialize() command. I imagine this goes off and loads up the production dll. Once this line has executed, I can put the breakpoint in my production code and run until I hit it. But it's quite annoying to have to run to this line, set the breakpoint and continue every time I want to run the test.
So I think the problem is Visual C++ doesn't realise the two projects are related. Is this a linker issue? What does the linker do and what settings should I change to make this work?
Thanks in advance. Apologies if instead I should be appending this question to the existing one, this is my first post so not quite sure how this should work.
[Update 1] I think Chris O has identified the problem. I'll add a further update if I'm able to work out how to use the project settings to make this work.
It sounds like you are using VC6, since you mention dsw files. I think that is as good as it gets in VC6, you have to manually add the breakpoint after your module is loaded from LoadLibrary. Actually, there might be a project debug setting, so you can specify which DLLs to load when debugging your project, that will keep your breakpoints enabled when hitting F5.
You can also try attaching the debugger after you know the mytest_initialize() has been called, that might keep your breakpoints enabled.
I had this issue sometimes, but always pass this with some code replacement actions.
Here is some guy post, how he had fixed it.
Hope it helps.
In my case i solved this by setting the DLL project containing the breakpoint as Active Project and changed Debug settings for this project (right-click project>>settings>>Debug tab) to point to the project that actually runs and accesses the DLL. "Executable for debug session:" and "Working directory:" should be set to the executable that you actually want to run and its corresponding directory.
Hope this is of any help.
right-click project>>settings>>Link tab
check on Generate debug info
check on Link incrementally
I am working on a solution consisting of 8 .NET projects. Since I am practicing TDD, I have to re-compile my solution very often. Lately I have been getting the following error about every second time when trying to compile:
Error 2 Unable to copy file
"obj\Debug\Zeiterfassung.Tests.dll" to
"bin\Debug\Zeiterfassung.Tests.dll".
The process cannot access the file
'bin\Debug\Zeiterfassung.Tests.dll'
because it is being used by another
process.
Zeiterfassung.Tests.dll is the dll generated by one of my projects (it's the unit testing project). It's always this dll that cannot be copied and causes the error. Everything else works fine 100% of the time.
In about 9/10 times I can "solve" the problem by recompiling my solution again. But when the problem is getting really bad, the project just won't compile successfully no matter how often I try and I have to restart the IDE.
I used microsoft's handle.exe to ascertain which process is locking the DLL and it is devenv.exe. I also tried deleting the DLL by hand and it really can't be deleted until I restart the IDE.
Last but not least, I tried adding <GenerateResourceNeverLockTypeAssemblies>true</GenerateResourceNeverLockTypeAssemblies> to my project as suggested in another forum, but this did not help.
Please help! This problem is really starting to drive me nuts.
Edit: I might also add that I made sure my unit tests are finished when this problem occurrs. Still, the dll remains locked. I am running my tests via the Resharper unit test explorer.
I've faced the same problem before. Process Explorer is able to delete the handle.
The most likely problem is a threading issue. You probably had an itinerant thread that is still executing, and it has the reference to the .DLL.
This worked for me:
1) Create new folder outside of the Project (c:\Debug);
2) Right click your Project and select Properties;
3) Locate Build tab;
4) Navigate to Output section in the Build tab (last one in VS2010);
5) Click Browse button and select your new c:\Debug location as an output directory;
6) Save all changes;
7) Build (F6);
Visual Studio has had one or another problem like this since Day 1. It would be nice to give you a set of simple solutions that always work, but frankly, sometimes, it has just "tripped over its own feet".
In that case, the simple solution is to exit and restart. Even closing the solution and reopening may not help.
By "I tried adding true to my project as suggested in another forum" do you mean that you created a property named GenerateResourceNeverLockTypeAssemblies and set it to true as suggested at http://social.msdn.microsoft.com/Forums/en-US/msbuild/thread/6f76db9a-ea37-42b3-a016-571912c28032? If not try that out.
Sayed Ibrahim Hashimi
My Book: Inside the Microsoft Build Engine : Using MSBuild and Team Foundation Build
Looks like the bug disappeared (fingers crossed...) after I moved my test project, checked out an earlier version of the project from the repository and replaced all code files with the newer versions.
I had a similar problem. I don't know of a nice solution, but a hack that solves the problem is to add a pre-build event that kills vstest.executionengine.exe:
taskkill /F /IM vstest.executionengine.exe /FI "MEMUSAGE gt 1"
taskkill /F /IM vstest.executionengine.x86.exe /FI "MEMUSAGE gt 1"
I have a solution with several projects, where the startup project has a post-build event that does all the copying of "plugin" projects and other organizing tasks. After upgrading the solution from VS 2005 to VS 2008, it appears as though the post-build event only fires if I modify the startup project, which means my updated plugins don't get plugged in to the current debugging session. This makes sense, but it seems like a change in behavior. Is anyone else noticing a change in behavior with regard to which projects get built?
Does anyone know of a workaround that I can use to force the startup project to rebuild whenever I hit F5? Perhaps I configured VS 2005 to work this way so long ago that I've forgotten all about it ...
I think you need to reorganize the responsibilities. Each component should be responsible for itself and therefore copy its generated goodness where it needs to go. That way it doesn't matter if/who/what/when/where got built. Whatever is updated will put itself into the proper place.
IMO the other suggestions are no-nos since they'll circumvent the compiler's smarts to know when a rebuild is necessary for the main project. And hence killing any compile time-savings. If your "plugin" projects are assemblies (and not just project-references from the main project), then you do not need to rebuild the main project each time a plugin is rebuilt. The new assembly will get selected into the process / debugger w/o the main project needing a rebuild.
Why not just add a dependency to the "startup" project for each of the plugins? This will force the project to be rebuilt if any of the others change, and you won't have to mess with any other pre/post-build events.
I don't know if this is the right way to do it but you could add a prebuild event to your startup projcet (if it's static) to clean the project which will force a rebuild.
something like:
devenv project.csproj /clean
This is a pain. What we really need is for Microsoft to allow us to hook into a Post-Solution Build event. You can do this via macros but that's too complicated.
I'm assuming this is a C++ project because I don't have this problem with C#.
This is my solution, it's not elegant but it works:
Create a new project whose only purpose is to run the post-build script. Mark it as dependent on every other project in the solution.
Add a dummy file to that project called dummy.h or whatever.
Right click on dummy.h in Solution Explorer and select Properties.
Select 'Custom Build Step'.
For the command line type 'echo' and for Outputs just type 'dummy' or something else that will never exist.
This project, and therefore the post-build script, will now be run on every build.
John.
flipdoubt: they are projects created originally in 2008. My suggestion if it's not working C# is to look in the Build Events tab and check the setting of the "Run the post-build event:" drop down. If it is set to 'When the build updates the project output' this might be your problem, try setting to 'On successful build'.
John.
I'm having the same issue here and it is VERY annoying. John Richardson is right in that there should be a Post-Solution Build event (and a Pre-Solution Build event) that applies whenever ANY project in the solution is being built.
I don't think there is any good workaround to get this outcome in the current VS 2008 IDE.
Starting from #lomaxx suggestion, I got a very similar setup working by adding the following line at the end of the post-build event of the startup project:
"$(DevEnvDir)devenv.exe" "$(ProjectPath)" /clean
Note that this makes the startup project build the next time you need to debug, so you should make sure the project gets built at least once.
PS. I initially tried the pre-build as suggested, but that didn't work (and I think it makes sense - if VS thinks a project doesn't need building, it won't execute any events for that project).