I'm trying to create this huge hash, where there are many keys but only a few values.
So far I have it like so...
du_factor = {
"A" => 1,
"B" => 1,
"C" => 1,
"D" => 2,
"E" => 2,
"F" => 2,
...etc., etc., etc., on and on and on for longer than you even want to know. What's a shorter and more elegant way of creating this hash without flipping its structure entirely?
Edit: Hey so, I realized there was a waaaay easier and more elegant way to do this than the answers given. Just declare an empty hash, then declare some arrays with the keys you want, then use a for statement to insert them into the array, like so:
du1 = ["A", "B", "C"]
du2 = ["D", "E", "F"]
dufactor = {}
for i in du1
dufactor[i] = 1
end
for i in du740
dufactor[i] = 2
end
...but the fact that nobody suggested that makes me, the extreme Ruby n00b, think that there must be a reason why I shouldn't do it this way. Performance issues?
Combining Ranges with a case block might be another option (depending on the problem you are trying to solve):
case foo
when ('A'..'C') then 1
when ('D'..'E') then 2
# ...
end
Especially if you focus on your source code's readability.
How about:
vals_to_keys = {
1 => [*'A'..'C'],
2 => [*'D'..'F'],
3 => [*'G'..'L'],
4 => ['dog', 'cat', 'pig'],
5 => [1,2,3,4]
}
vals_to_keys.each_with_object({}) { |(v,arr),h| arr.each { |k| h[k] = v } }
#=> {"A"=>1, "B"=>1, "C"=>1, "D"=>2, "E"=>2, "F"=>2, "G"=>3, "H"=>3, "I"=>3,
# "J"=>3, "K"=>3, "L"=>3, "dog"=>4, "cat"=>4, "pig"=>4, 1=>5, 2=>5, 3=>5, 4=>5}
What about something like this:
du_factor = Hash.new
["A", "B", "C"].each {|ltr| du_factor[ltr] = 1}
["D", "E", "F"].each {|ltr| du_factor[ltr] = 2}
# Result:
du_factor # => {"A"=>1, "B"=>1, "C"=>1, "D"=>2, "E"=>2, "F"=>2}
Create an empty hash, then for each group of keys that share a value, create an array literal containing the keys, and use the array's '.each' method to batch enter them into the hash. Basically the same thing you did above with for loops, but it gets it done in three lines.
keys = %w(A B C D E F)
values = [1, 1, 1, 2, 2, 2]
du_factor = Hash[*[keys, values].transpose.flatten]
If these will be more than 100, writing them down to a CSV file might be better.
keys = [%w(A B C), %w(D E F)]
values = [1,2]
values.map!.with_index{ |value, idx| Array(value) * keys[idx].size }.flatten!
keys.flatten!
du_factor = Hash[keys.zip(values)]
Notice here that I used destructive methods (methods ending with !). this is important for performance and memory usage optimization.
I have an array:
scores = [1, 2, 3, "", 4]
And I want to remove all blank values. But when I run this:
puts scores.reject(&:empty?)
I get an error:
undefined method `empty' for 1:Fixnum
How can I remove values that are not integers from my array in a one step process? I am using Ruby 1.9.3.
To reject only nil would be:
array.compact
If you want to remove blank values, you should use blank?: (requires Rails / ActiveSupport)
scores.reject(&:blank?)
#=> [1, 2, 3, 4]
"", " ", false, nil, [], and {} are blank.
It is as simple as:
scores.grep(Integer)
Note that if you plan to map the values, you can do that in a block after:
scores.grep(Integer){|x| x+1 }
Bonus if you want to do the same thing, but your numbers are strings:
scores.grep(/\d+/){|x|x.to_i}
Try this :
scores.select{|e| e.is_a? Integer}
# => [1, 2, 3, 4]
If you really need reject nil only, so it can be done like this:
scores.reject(&:nil?)
scores = [1, 2, 3, "", 4, nil]
scores.reject{|s| s.to_s == ''}
# => [1, 2, 3, 4]
This Worked for me
scores.reject!{|x| x.to_s.empty?}
scores.select{|score| score.is_a? Fixnum}
or, as Fixnum inherits from Integer, you can also go for
scores.select{|score| score.is_a? Integer)
...if that seems more descriptive.
Array and Enumerable tend to offer many ways of doing the same thing.
&:empty? will work for hashes, arrays, and strings, but not numbers. The method you use in reject must be valid for all items in a list. &:blank? will work fine for this reason.
In Ruby, given an array in one of the following forms...
[apple, 1, banana, 2]
[[apple, 1], [banana, 2]]
...what is the best way to convert this into a hash in the form of...
{apple => 1, banana => 2}
Simply use Hash[*array_variable.flatten]
For example:
a1 = ['apple', 1, 'banana', 2]
h1 = Hash[*a1.flatten(1)]
puts "h1: #{h1.inspect}"
a2 = [['apple', 1], ['banana', 2]]
h2 = Hash[*a2.flatten(1)]
puts "h2: #{h2.inspect}"
Using Array#flatten(1) limits the recursion so Array keys and values work as expected.
NOTE: For a concise and efficient solution, please see Marc-André Lafortune's answer below.
This answer was originally offered as an alternative to approaches using flatten, which were the most highly upvoted at the time of writing. I should have clarified that I didn't intend to present this example as a best practice or an efficient approach. Original answer follows.
Warning! Solutions using flatten will not preserve Array keys or values!
Building on #John Topley's popular answer, let's try:
a3 = [ ['apple', 1], ['banana', 2], [['orange','seedless'], 3] ]
h3 = Hash[*a3.flatten]
This throws an error:
ArgumentError: odd number of arguments for Hash
from (irb):10:in `[]'
from (irb):10
The constructor was expecting an Array of even length (e.g. ['k1','v1,'k2','v2']). What's worse is that a different Array which flattened to an even length would just silently give us a Hash with incorrect values.
If you want to use Array keys or values, you can use map:
h3 = Hash[a3.map {|key, value| [key, value]}]
puts "h3: #{h3.inspect}"
This preserves the Array key:
h3: {["orange", "seedless"]=>3, "apple"=>1, "banana"=>2}
The best way is to use Array#to_h:
[ [:apple,1],[:banana,2] ].to_h #=> {apple: 1, banana: 2}
Note that to_h also accepts a block:
[:apple, :banana].to_h { |fruit| [fruit, "I like #{fruit}s"] }
# => {apple: "I like apples", banana: "I like bananas"}
Note: to_h accepts a block in Ruby 2.6.0+; for early rubies you can use my backports gem and require 'backports/2.6.0/enumerable/to_h'
to_h without a block was introduced in Ruby 2.1.0.
Before Ruby 2.1, one could use the less legible Hash[]:
array = [ [:apple,1],[:banana,2] ]
Hash[ array ] #= > {:apple => 1, :banana => 2}
Finally, be wary of any solutions using flatten, this could create problems with values that are arrays themselves.
Update
Ruby 2.1.0 is released today. And I comes with Array#to_h (release notes and ruby-doc), which solves the issue of converting an Array to a Hash.
Ruby docs example:
[[:foo, :bar], [1, 2]].to_h # => {:foo => :bar, 1 => 2}
Edit: Saw the responses posted while I was writing, Hash[a.flatten] seems the way to go.
Must have missed that bit in the documentation when I was thinking through the response. Thought the solutions that I've written can be used as alternatives if required.
The second form is simpler:
a = [[:apple, 1], [:banana, 2]]
h = a.inject({}) { |r, i| r[i.first] = i.last; r }
a = array, h = hash, r = return-value hash (the one we accumulate in), i = item in the array
The neatest way that I can think of doing the first form is something like this:
a = [:apple, 1, :banana, 2]
h = {}
a.each_slice(2) { |i| h[i.first] = i.last }
You can also simply convert a 2D array into hash using:
1.9.3p362 :005 > a= [[1,2],[3,4]]
=> [[1, 2], [3, 4]]
1.9.3p362 :006 > h = Hash[a]
=> {1=>2, 3=>4}
Summary & TL;DR:
This answer hopes to be a comprehensive wrap-up of information from other answers.
The very short version, given the data from the question plus a couple extras:
flat_array = [ apple, 1, banana, 2 ] # count=4
nested_array = [ [apple, 1], [banana, 2] ] # count=2 of count=2 k,v arrays
incomplete_f = [ apple, 1, banana ] # count=3 - missing last value
incomplete_n = [ [apple, 1], [banana ] ] # count=2 of either k or k,v arrays
# there's one option for flat_array:
h1 = Hash[*flat_array] # => {apple=>1, banana=>2}
# two options for nested_array:
h2a = nested_array.to_h # since ruby 2.1.0 => {apple=>1, banana=>2}
h2b = Hash[nested_array] # => {apple=>1, banana=>2}
# ok if *only* the last value is missing:
h3 = Hash[incomplete_f.each_slice(2).to_a] # => {apple=>1, banana=>nil}
# always ok for k without v in nested array:
h4 = Hash[incomplete_n] # or .to_h => {apple=>1, banana=>nil}
# as one might expect:
h1 == h2a # => true
h1 == h2b # => true
h1 == h3 # => false
h3 == h4 # => true
Discussion and details follow.
Setup: variables
In order to show the data we'll be using up front, I'll create some variables to represent various possibilities for the data. They fit into the following categories:
Based on what was directly in the question, as a1 and a2:
(Note: I presume that apple and banana were meant to represent variables. As others have done, I'll be using strings from here on so that input and results can match.)
a1 = [ 'apple', 1 , 'banana', 2 ] # flat input
a2 = [ ['apple', 1], ['banana', 2] ] # key/value paired input
Multi-value keys and/or values, as a3:
In some other answers, another possibility was presented (which I expand on here) – keys and/or values may be arrays on their own:
a3 = [ [ 'apple', 1 ],
[ 'banana', 2 ],
[ ['orange','seedless'], 3 ],
[ 'pear', [4, 5] ],
]
Unbalanced array, as a4:
For good measure, I thought I'd add one for a case where we might have an incomplete input:
a4 = [ [ 'apple', 1],
[ 'banana', 2],
[ ['orange','seedless'], 3],
[ 'durian' ], # a spiky fruit pricks us: no value!
]
Now, to work:
Starting with an initially-flat array, a1:
Some have suggested using #to_h (which showed up in Ruby 2.1.0, and can be backported to earlier versions). For an initially-flat array, this doesn't work:
a1.to_h # => TypeError: wrong element type String at 0 (expected array)
Using Hash::[] combined with the splat operator does:
Hash[*a1] # => {"apple"=>1, "banana"=>2}
So that's the solution for the simple case represented by a1.
With an array of key/value pair arrays, a2:
With an array of [key,value] type arrays, there are two ways to go.
First, Hash::[] still works (as it did with *a1):
Hash[a2] # => {"apple"=>1, "banana"=>2}
And then also #to_h works now:
a2.to_h # => {"apple"=>1, "banana"=>2}
So, two easy answers for the simple nested array case.
This remains true even with sub-arrays as keys or values, as with a3:
Hash[a3] # => {"apple"=>1, "banana"=>2, ["orange", "seedless"]=>3, "pear"=>[4, 5]}
a3.to_h # => {"apple"=>1, "banana"=>2, ["orange", "seedless"]=>3, "pear"=>[4, 5]}
But durians have spikes (anomalous structures give problems):
If we've gotten input data that's not balanced, we'll run into problems with #to_h:
a4.to_h # => ArgumentError: wrong array length at 3 (expected 2, was 1)
But Hash::[] still works, just setting nil as the value for durian (and any other array element in a4 that's just a 1-value array):
Hash[a4] # => {"apple"=>1, "banana"=>2, ["orange", "seedless"]=>3, "durian"=>nil}
Flattening - using new variables a5 and a6
A few other answers mentioned flatten, with or without a 1 argument, so let's create some new variables:
a5 = a4.flatten
# => ["apple", 1, "banana", 2, "orange", "seedless" , 3, "durian"]
a6 = a4.flatten(1)
# => ["apple", 1, "banana", 2, ["orange", "seedless"], 3, "durian"]
I chose to use a4 as the base data because of the balance problem we had, which showed up with a4.to_h. I figure calling flatten might be one approach someone might use to try to solve that, which might look like the following.
flatten without arguments (a5):
Hash[*a5] # => {"apple"=>1, "banana"=>2, "orange"=>"seedless", 3=>"durian"}
# (This is the same as calling `Hash[*a4.flatten]`.)
At a naïve glance, this appears to work – but it got us off on the wrong foot with the seedless oranges, thus also making 3 a key and durian a value.
And this, as with a1, just doesn't work:
a5.to_h # => TypeError: wrong element type String at 0 (expected array)
So a4.flatten isn't useful to us, we'd just want to use Hash[a4]
The flatten(1) case (a6):
But what about only partially flattening? It's worth noting that calling Hash::[] using splat on the partially-flattened array (a6) is not the same as calling Hash[a4]:
Hash[*a6] # => ArgumentError: odd number of arguments for Hash
Pre-flattened array, still nested (alternate way of getting a6):
But what if this was how we'd gotten the array in the first place?
(That is, comparably to a1, it was our input data - just this time some of the data can be arrays or other objects.) We've seen that Hash[*a6] doesn't work, but what if we still wanted to get the behavior where the last element (important! see below) acted as a key for a nil value?
In such a situation, there's still a way to do this, using Enumerable#each_slice to get ourselves back to key/value pairs as elements in the outer array:
a7 = a6.each_slice(2).to_a
# => [["apple", 1], ["banana", 2], [["orange", "seedless"], 3], ["durian"]]
Note that this ends up getting us a new array that isn't "identical" to a4, but does have the same values:
a4.equal?(a7) # => false
a4 == a7 # => true
And thus we can again use Hash::[]:
Hash[a7] # => {"apple"=>1, "banana"=>2, ["orange", "seedless"]=>3, "durian"=>nil}
# or Hash[a6.each_slice(2).to_a]
But there's a problem!
It's important to note that the each_slice(2) solution only gets things back to sanity if the last key was the one missing a value. If we later added an extra key/value pair:
a4_plus = a4.dup # just to have a new-but-related variable name
a4_plus.push(['lychee', 4])
# => [["apple", 1],
# ["banana", 2],
# [["orange", "seedless"], 3], # multi-value key
# ["durian"], # missing value
# ["lychee", 4]] # new well-formed item
a6_plus = a4_plus.flatten(1)
# => ["apple", 1, "banana", 2, ["orange", "seedless"], 3, "durian", "lychee", 4]
a7_plus = a6_plus.each_slice(2).to_a
# => [["apple", 1],
# ["banana", 2],
# [["orange", "seedless"], 3], # so far so good
# ["durian", "lychee"], # oops! key became value!
# [4]] # and we still have a key without a value
a4_plus == a7_plus # => false, unlike a4 == a7
And the two hashes we'd get from this are different in important ways:
ap Hash[a4_plus] # prints:
{
"apple" => 1,
"banana" => 2,
[ "orange", "seedless" ] => 3,
"durian" => nil, # correct
"lychee" => 4 # correct
}
ap Hash[a7_plus] # prints:
{
"apple" => 1,
"banana" => 2,
[ "orange", "seedless" ] => 3,
"durian" => "lychee", # incorrect
4 => nil # incorrect
}
(Note: I'm using awesome_print's ap just to make it easier to show the structure here; there's no conceptual requirement for this.)
So the each_slice solution to an unbalanced flat input only works if the unbalanced bit is at the very end.
Take-aways:
Whenever possible, set up input to these things as [key, value] pairs (a sub-array for each item in the outer array).
When you can indeed do that, either #to_h or Hash::[] will both work.
If you're unable to, Hash::[] combined with the splat (*) will work, so long as inputs are balanced.
With an unbalanced and flat array as input, the only way this will work at all reasonably is if the last value item is the only one that's missing.
Side-note: I'm posting this answer because I feel there's value to be added – some of the existing answers have incorrect information, and none (that I read) gave as complete an answer as I'm endeavoring to do here. I hope that it's helpful. I nevertheless give thanks to those who came before me, several of whom provided inspiration for portions of this answer.
Appending to the answer but using anonymous arrays and annotating:
Hash[*("a,b,c,d".split(',').zip([1,2,3,4]).flatten)]
Taking that answer apart, starting from the inside:
"a,b,c,d" is actually a string.
split on commas into an array.
zip that together with the following array.
[1,2,3,4] is an actual array.
The intermediate result is:
[[a,1],[b,2],[c,3],[d,4]]
flatten then transforms that to:
["a",1,"b",2,"c",3,"d",4]
and then:
*["a",1,"b",2,"c",3,"d",4] unrolls that into
"a",1,"b",2,"c",3,"d",4
which we can use as the arguments to the Hash[] method:
Hash[*("a,b,c,d".split(',').zip([1,2,3,4]).flatten)]
which yields:
{"a"=>1, "b"=>2, "c"=>3, "d"=>4}
if you have array that looks like this -
data = [["foo",1,2,3,4],["bar",1,2],["foobar",1,"*",3,5,:foo]]
and you want the first elements of each array to become the keys for the hash and the rest of the elements becoming value arrays, then you can do something like this -
data_hash = Hash[data.map { |key| [key.shift, key] }]
#=>{"foo"=>[1, 2, 3, 4], "bar"=>[1, 2], "foobar"=>[1, "*", 3, 5, :foo]}
Not sure if it's the best way, but this works:
a = ["apple", 1, "banana", 2]
m1 = {}
for x in (a.length / 2).times
m1[a[x*2]] = a[x*2 + 1]
end
b = [["apple", 1], ["banana", 2]]
m2 = {}
for x,y in b
m2[x] = y
end
For performance and memory allocation concerns please check my answer to Rails mapping array of hashes onto single hash where I bench-marked several solutions.
reduce / inject can be the fastest or the slowest solution depending on which method you use it which.
If the numeric values are seq indexes, then we could have simpler ways...
Here's my code submission, My Ruby is a bit rusty
input = ["cat", 1, "dog", 2, "wombat", 3]
hash = Hash.new
input.each_with_index {|item, index|
if (index%2 == 0) hash[item] = input[index+1]
}
hash #=> {"cat"=>1, "wombat"=>3, "dog"=>2}