I'm designing a cool spell checker (I know I know, modern browsers already have this), anyway, I am wondering what kind of effort would it take to develop a fairly simple but decent suggest-word algorithm.
My idea is that I would first look through the misspelled word's characters and count the amount of characters it matches in each word in the dictionary (sounds resources intensive), and then pick the top 5 matches (so if the misspelled word matches the most characters with 7 words from the dictionary, it will randomly display 5 of those words as suggested spelling).
Obviously to get more advanced, we would look at "common words" and have a dictionary file that is numbered with 'frequency of that word used in English language' ranking. I think that's taking it a bit overboard maybe.
What do you think? Anyone have ideas for this?
First of all you will have to consider the complexity in finding the "nearer" words to the misspelled word. I see that you are using a dictionary, a hash table perhaps. But this may not be enough. The best and cooler solution here is to go for a TRIE datastructure. The complexity of finding these so called nearer words will take linear order timing and it is very easy to exhaust the tree.
A small example
Take the word "njce". This is a level 1 example where one word is clearly misspelled. The obvious suggestion expected would be nice. The first step is very obvious to see whether this word is present in the dictionary. Using the search function of a TRIE, this could be done O(1) time, similar to a dictionary. The cooler part is finding the suggestions. You would obviously have to exhaust all the words that start with 'a' to 'z' that has words like ajce bjce cjce upto zjce. Now to find the occurences of this type is again linear depending on the character count. You should not carried away by multiplying this number with 26 the length of words. Since TRIE immediately diminishes as the length grows. Coming back to the problem. Once that search is done for which no result was found, you go the next character. Now you would be searching for nace nbce ncce upto nzce. In fact you wont have explore all the combinations as the TRIE data structure by itself will not be having the intermediate characters. Perhaps it will have na ni ne no nu characters and the search space becomes insanely simple. So are the further occurrences. You could develop on this concept further based on second and third order matches. Hope this helped.
I'm not sure how much of the wheel you're trying to reinvent, so you may want to check out Lucene.
Apache Lucene Core™ (formerly named Lucene Java), our flagship sub-project, provides a Java-based indexing and search implementation, as well as spellchecking, hit highlighting and advanced analysis/tokenization capabilities.
Related
I have contacts stored in my mobile. Lets say my contacts are
Ram
Hello
Hi
Feat
Eat
At
When I type letter 'A' I should get all the matching contacts say "Ram, Feat, Eat, At".
Now I type one more letter T. Now my total string is "AT" now my program should reuse the results of previous search for "A". Now it should return me "Feat, Eat, At"
Design and develop a program for this.
This is interview question at Samsung mobile development
I tried solving with Trie data structures. Could not get good solution for reusing already searched string results. I also tried solution with dictionary data structure, solution has same disadvantage as Trie.
question is how do I search the contacts for each letter typed reusing the search results of earlier searched string? What data structure and algorithm should be used for efficiently solving the problem.
I am not asking for program. So programming language is immaterial for me.
State machine appears to be good solution. Does anyone have suggestion?
Solution should be fast enough for million contacts.
It kind of depends on how many items you're searching. If it's a relatively small list, you can do a string.contains check on everything. So when the user types "A", you search the entire list:
for each contact in contacts
if contact.Name.Contains("A")
Add contact to results
Then the user types "T", and you sequentially search the previous returned results:
for each contact in results
if contact.Name.Contains("AT")
Add contact to new search results
Things get more interesting if the list of contacts is huge, but for the number of contacts that you'd normally have in a phone (a thousand would be a lot!), this is going to work very well.
If the interviewer said, "use the results from the previous search for the new search," then I suspect that this is the answer he was looking for. It would take longer to create a new suffix tree than to just sequentially search the previous result set.
You could optimize this a little bit by storing the position of the substring along with the contact so that all you have to do the next time around is check to see if the next character is as expected, but doing so complicates the algorithm a bit (you have to treat the first search as a special case, and you have to explicitly check string lengths, etc.), and is unlikely to provide much benefit after the first few characters because the size of the list to be searched would be pretty small. The pure sequential search with contains check is going to be plenty fast. Users wouldn't notice the few microseconds you'd save with that optimization.
Update after edit to question
If you want to do this with a million contacts, sequential search might not be the best way to go at the start. Although I'd still give it a try. "Fast enough for a million contacts" raises the question of what exactly "fast enough" means. How long does it take to search one million contacts for the existence of a single letter? How long is the user willing to wait? Remember also that you only have to show one page of contacts before the user takes another action. And you can almost certainly to that before the user presses the second key. Especially if you have a background thread doing the search while the foreground thread handles input and writing the first page of matched strings to the display.
Anyway, you could speed up the initial search by creating a bigram index. That is, for each bigram (sequence of two characters), build a list of names that contain that bigram. You'll also want to create a list of strings for each single character. So, given your list of names, you'd have:
r - ram
a - ram, feat, eat, a
m - ram
h - hello, hi
...
ra - ram
am - ram
...
at - feat, eat, at
...
etc.
I think you get the idea.
That bigram index gets stored in a dictionary or hash map. There are only 325 possible bigrams in the English language, and of course the 26 letters, so at most your dictionary is going to have 351 entries.
So you have almost instant lookup of 1- and 2-character names. How does this help you?
An analysis of Project Gutenberg text shows that the most common bigram in the English language occurs only 3.8% of the time. I realize that names won't share exactly that distribution, but that's a pretty good rough number. So after the first two characters are typed, you'll probably be working with less than 5% of the total names in your list. Five percent of a million is 50,000. With just 50,000 names, you can start using the sequential search algorithm that I described originally.
The cost of this new structure isn't too bad, although it's expensive enough that I'd certainly try the simple sequential search first, anyway. This is going to cost you an extra 2 million references to the names, in the worst case. You could reduce that to a million extra references if you build a 2-level trie rather than a dictionary. That would take slightly longer to lookup and display the one-character search results, but not enough to be noticeable by the user.
This structure is also very easy to update. To add a name, just go through the string and make entries for the appropriate characters and bigrams. To remove a name, go through the name extracting bigrams, and remove the name from the appropriate lists in the bigram index.
Look up "generalized suffix tree", e.g. https://en.wikipedia.org/wiki/Generalized_suffix_tree . For a fixed alphabet size this data structure gives asymptotically optimal solution to find all z matches of a substring of length m in a set of strings in O(z + m) time. Thus you get the same sort of benefit as if you restricted your search to the matches for the previous prefix. Also the structure has optimal O(n) space and build time where n is the total length of all your contacts. I believe you can modify the structure so that you just find the k strings that contain the substring in O(k + m) time, but in general you probably shouldn't have too many matches per contact that have a match, so this may not even be necessary.
What I'm thinking to do is, keeping track of the so far matched string. Suppose in the first step, we identify the strings those have "A" in them and we keep trace of the positions of 'A". Then in the next step we only iterate over these strings and instead of searching them full we only check for occurrence of "T" as the next character to "A" we kept trace in the previous step and so on.
I was looking around some puzzles online to improve my knowledge on algorithms...
I came upon below question:
"You have a sentence with several words with spaces remove and words having their character order shuffled. You have a dictionary. Write an algorithm to produce the sentence back with spaces and words with normal character order."
I do not know what is good way to solve this.
I am new to algorithms but just looking at problem I think I would make program do what an intellectual mind would do.
Here is something I can think of:
-First find out manually common short english words from dictionary like "is" "the" "if" etc and put in dataset-1.
-Then find out permutation of words in dataset1 (eg "si", "eht" or "eth" or "fi") and put in dataset-2
-then find out from input sentense what character sequence matches the words of dataset2 and put them in dataset-3 and insert space in input sentence instead of those found.
-for rest of the words i would perform permutations to find out word from dictionary.
I am newbie to algorithms...is it a bad solution?
this seems like a perfectly fine solution,
In general there are 2 parameters for judging an algorithm.
correctness - does the algorithm provide the correct answer.
resources - the time or storage size needed to provide an answer.
usually there is a tradeoff between these two parameters.
so for example the size of your dictionary dictates what scrambled sentences you may
reconstruct, giving you a correct answer for more inputs,
however the whole searching process would take longer and would require more storage.
The hard part of the problem you presented is the fact that you need to compute permutations, and there are a LOT of them.
so checking them all is expensive, a good approach would be to do what you suggested, create a small subset of commonly used words and check them first, that way the average case is better.
note: just saying that you check the permutation/search is ok, but in the end you would need to specify the exact way of doing that.
currently what you wrote is an idea for an algorithm but it would not allow you to take a given input and mechanically work out the output.
Actually, might be wise to start by partitioning the dictionary by word length.
Then try to find the largest words that can be made using the letters avaliable, instead of finding the smallest ones. Short words are more common and thus will be harder to narrow down. IE: is it really "If" or "fig".
Then for each word length w, you can proceed w characters at a time.
There are still a lot of possible combinations though, simply because you found a valid word, doesn't mean it's the right word. Once you've gone through all the substrings, of which there should be something like O(c^4*d) where d is the number of words in the dictionary and c is the number of characters in the sentence. Practically speaking if the dictionary is sorted by word length, it'll be a fair bit less than that. Then you have to take the valid words, and figure out an ordering that works, so that all characters are used. There might be multiple solutions.
We have a list of about 150,000 words, and when the user enters a free text, the system should present a list of words from the dictionary, that are very close to words in the free text.
For instance, the user enters: "I would like to buy legoe toys in Walmart". If the dictionary contains "Lego", "Car" and "Walmart", the system should present "Lego" and "Walmart" in the list. "Walmart" is obvious because it is identical to a word in the sentence, but "Lego" is similar enough to "Legoe" to be mentioned, too. However, nothing is similar to "Car", so that word is not shown.
Showing the list should be realtime, meaning that when the user has entered the sentence, the list of words must be present on the screen. Does anybody know a good algorithm for this?
The dictionary actually contains concepts which may include a space. For instance, "Lego spaceship". The perfect solution recognizes these multi-word concepts, too.
Any suggestions are appreciated.
Take a look at http://norvig.com/spell-correct.html for a simple algorithm. The article uses Python, but there are links to implementations in other languages at the end.
You will be doing quite a few lookups of words against a fixed dictionary. Therefore you need to prepare your dictionary. Logically, you can quickly eliminate candidates that are "just too different".
For instance, the words car and dissimilar may share a suffix, but they're obviously not misspellings of each other. Now why is that so obvious to us humans? For starters, the length is entirely different. That's an immediate disqualification (but with one exception - below). So, your dictionary should be sorted by word length. Match your input word with words of similar length. For short words that means +/- 1 character; longer words should have a higher margin (exactly how well can your demographic spell?)
Once you've restricted yourself to candidate words of similar length, you'd want to strip out words that are entirely dissimilar. With this I mean that they use entirely different letters. This is easiest to compare if you sort the letters in a word alphabetically. E.g. car becomes "acr"; rack becomes "ackr". You'll do this in preprocessing for your dictionary, and for each input word. The reason is that it's cheap to determine the (size of an) difference of two sorted sets. (Add a comment if you need explanation). car and rack have an difference of size 1, car and hat have a difference of size 2. This narrows down your set of candidates even further. Note that for longer words, you can bail out early when you've found too many differences. E.g. dissimilar and biography have a total difference of 13, but considering the length (8/9) you can probably bail out once you've found 5 differences.
This leaves you with a set of candidate words that use almost the same letters, and also are almost the same length. At this point you can start using more refined algorithms; you don't need to run 150.000 comparisons per input word anymore.
Now, for the length exception mentioned before: The problem is in "words" like greencar. It doesn't really match a word of length 8, and yet for humans it's quite obvious what was meant. In this case, you can't really break the input word at any random boundary and run an additional N-1 inexact matches against both halves. However, it is feasible to check for just a missing space. Just do a lookup for all possible prefixes. This is efficient because you'll be using the same part of the dictionary over and over, e.g. g gr, gre, gree, etc. For every prefix that you've found, check if the remaining suffixis also in the dictionery, e.g. reencar, eencar. If both halves of the input word are in the dictionary, but the word itself isn't, you can assume a missing space.
You would likely want to use an algorithm which calculates the Levenshtein distance.
However, since your data set is quite large, and you'll be comparing lots of words against it, a direct implementation of typical algorithms that do this won't be practical.
In order to find words in a reasonable amount of time, you will have to index your set of words in some way that facilitates fuzzy string matching.
One of these indexing methods would be to use a suffix tree. Another approach would be to use n-grams.
I would lean towards using a suffix tree since I find it easier to wrap my head around it and I find it more suited to the problem.
It might be of interest to look at a some algorithms such as the Levenshtein distance, which can calculate the amount of difference between 2 strings.
I'm not sure what language you are thinking of using but PHP has a function called levenshtein that performs this calculation and returns the distance. There's also a function called similar_text that does a similar thing. There's a code example here for the levenshtein function that checks a word against a dictionary of possible words and returns the closest words.
I hope this gives you a bit of insight into how a solution could work!
I have a big collection of human generated content. I want to find the words or phrases that occur most often. What is an efficient way to do this?
Don't reinvent the wheel. Use a full text search engine such as Lucene.
The simple/naive way is to use a hashtable. Walk through the words and increment the count as you go.
At the end of the process sort the key/value pairs by count.
the basic idea is simple -- in executable pseudocode,
from collections import defaultdict
def process(words):
d = defaultdict(int)
for w in words: d[w] += 1
return d
Of course, the devil is in the details -- how do you turn the big collection into an iterator yielding words? Is it big enough that you can't process it on a single machine but rather need a mapreduce approach e.g. via hadoop? Etc, etc. NLTK can help with the linguistic aspects (isolating words in languages that don't separate them cleanly).
On a single-machine execution (net of mapreduce), one issue that can arise is that the simple idea gives you far too many singletons or thereabouts (words occurring once or just a few times), which fill memory. A probabilistic retort to that is to do two passes: one with random sampling (get only one word in ten, or one in a hundred) to make a set of words that are candidates for the top ranks, then a second pass skipping words that are not in the candidate set. Depending on how many words you're sampling and how many you want in the result, it's possible to compute an upper bound on the probability that you're going to miss an important word this way (and for reasonable numbers, and any natural language, I assure you that you'll be just fine).
Once you have your dictionary mapping words to numbers of occurrences you just need to pick the top N words by occurrences -- a heap-queue will help there, if the dictionary is just too large to sort by occurrences in its entirety (e.g. in my favorite executable pseudocode, heapq.nlargest will do it, for example).
Look into the Apriori algorithm. It can be used to find frequent items and/or frequent sets of items.
Like the wikipedia article states, there are more efficient algorithms that do the same thing, but this could be a good start to see if this will apply to your situation.
Maybe you can try using a PATRICIA trie or practical algorithm to retrieve information coded in alphanumeric trie?
Why not a simple map with key as the word and the Counter as the Value.
It will give the top used words, by taking the high value counter.
It is just a O(N) operation.
Here at work, we often need to find a string from the list of strings that is the closest match to some other input string. Currently, we are using Needleman-Wunsch algorithm. The algorithm often returns a lot of false-positives (if we set the minimum-score too low), sometimes it doesn't find a match when it should (when the minimum-score is too high) and, most of the times, we need to check the results by hand. We thought we should try other alternatives.
Do you have any experiences with the algorithms?
Do you know how the algorithms compare to one another?
I'd really appreciate some advice.
PS: We're coding in C#, but you shouldn't care about it - I'm asking about the algorithms in general.
Oh, I'm sorry I forgot to mention that.
No, we're not using it to match duplicate data. We have a list of strings that we are looking for - we call it search-list. And then we need to process texts from various sources (like RSS feeds, web-sites, forums, etc.) - we extract parts of those texts (there are entire sets of rules for that, but that's irrelevant) and we need to match those against the search-list. If the string matches one of the strings in search-list - we need to do some further processing of the thing (which is also irrelevant).
We can not perform the normal comparison, because the strings extracted from the outside sources, most of the times, include some extra words etc.
Anyway, it's not for duplicate detection.
OK, Needleman-Wunsch(NW) is a classic end-to-end ("global") aligner from the bioinformatics literature. It was long ago available as "align" and "align0" in the FASTA package. The difference was that the "0" version wasn't as biased about avoiding end-gapping, which often allowed favoring high-quality internal matches easier. Smith-Waterman, I suspect you're aware, is a local aligner and is the original basis of BLAST. FASTA had it's own local aligner as well that was slightly different. All of these are essentially heuristic methods for estimating Levenshtein distance relevant to a scoring metric for individual character pairs (in bioinformatics, often given by Dayhoff/"PAM", Henikoff&Henikoff, or other matrices and usually replaced with something simpler and more reasonably reflective of replacements in linguistic word morphology when applied to natural language).
Let's not be precious about labels: Levenshtein distance, as referenced in practice at least, is basically edit distance and you have to estimate it because it's not feasible to compute it generally, and it's expensive to compute exactly even in interesting special cases: the water gets deep quick there, and thus we have heuristic methods of long and good repute.
Now as to your own problem: several years ago, I had to check the accuracy of short DNA reads against reference sequence known to be correct and I came up with something I called "anchored alignments".
The idea is to take your reference string set and "digest" it by finding all locations where a given N-character substring occurs. Choose N so that the table you build is not too big but also so that substrings of length N are not too common. For small alphabets like DNA bases, it's possible to come up with a perfect hash on strings of N characters and make a table and chain the matches in a linked list from each bin. The list entries must identify the sequence and start position of the substring that maps to the bin in whose list they occur. These are "anchors" in the list of strings to be searched at which an NW alignment is likely to be useful.
When processing a query string, you take the N characters starting at some offset K in the query string, hash them, look up their bin, and if the list for that bin is nonempty then you go through all the list records and perform alignments between the query string and the search string referenced in the record. When doing these alignments, you line up the query string and the search string at the anchor and extract a substring of the search string that is the same length as the query string and which contains that anchor at the same offset, K.
If you choose a long enough anchor length N, and a reasonable set of values of offset K (they can be spread across the query string or be restricted to low offsets) you should get a subset of possible alignments and often will get clearer winners. Typically you will want to use the less end-biased align0-like NW aligner.
This method tries to boost NW a bit by restricting it's input and this has a performance gain because you do less alignments and they are more often between similar sequences. Another good thing to do with your NW aligner is to allow it to give up after some amount or length of gapping occurs to cut costs, especially if you know you're not going to see or be interested in middling-quality matches.
Finally, this method was used on a system with small alphabets, with K restricted to the first 100 or so positions in the query string and with search strings much larger than the queries (the DNA reads were around 1000 bases and the search strings were on the order of 10000, so I was looking for approximate substring matches justified by an estimate of edit distance specifically). Adapting this methodology to natural language will require some careful thought: you lose on alphabet size but you gain if your query strings and search strings are of similar length.
Either way, allowing more than one anchor from different ends of the query string to be used simultaneously might be helpful in further filtering data fed to NW. If you do this, be prepared to possibly send overlapping strings each containing one of the two anchors to the aligner and then reconcile the alignments... or possibly further modify NW to emphasize keeping your anchors mostly intact during an alignment using penalty modification during the algorithm's execution.
Hope this is helpful or at least interesting.
Related to the Levenstein distance: you might wish to normalize it by dividing the result with the length of the longer string, so that you always get a number between 0 and 1 and so that you can compare the distance of pair of strings in a meaningful way (the expression L(A, B) > L(A, C) - for example - is meaningless unless you normalize the distance).
We are using the Levenshtein distance method to check for duplicate customers in our database. It works quite well.
Alternative algorithms to look at are agrep (Wikipedia entry on agrep),
FASTA and BLAST biological sequence matching algorithms. These are special cases of approximate string matching, also in the Stony Brook algorithm repositry. If you can specify the ways the strings differ from each other, you could probably focus on a tailored algorithm. For example, aspell uses some variant of "soundslike" (soundex-metaphone) distance in combination with a "keyboard" distance to accomodate bad spellers and bad typers alike.
Use FM Index with Backtracking, similar to the one in Bowtie fuzzy aligner
In order to minimize mismatches due to slight variations or errors in spelling, I've used the Metaphone algorithm, then Levenshtein distance (scaled to 0-100 as a percentage match) on the Metaphone encodings for a measure of closeness. That seems to have worked fairly well.
To expand on Cd-MaN's answer, it sounds like you're facing a normalization problem. It isn't obvious how to handle scores between alignments with varying lengths.
Given what you are interested in, you may want to obtain p-values for your alignment. If you are using Needleman-Wunsch, you can obtain these p-values using Karlin-Altschul statistics http://www.ncbi.nlm.nih.gov/BLAST/tutorial/Altschul-1.html
BLAST will can local alignment and evaluate them using these statistics. If you are concerned about speed, this would be a good tool to use.
Another option is to use HMMER. HMMER uses Profile Hidden Markov Models to align sequences. Personally, I think this is a more powerful approach since it also provides positional information. http://hmmer.janelia.org/