Some files showed up mysteriously in my Magento shop home folder, they're all named core.13528, core.13529...there's about 40 of them, and all take up to 400MB!!
Does anyone know what do they mean and how did they got there? Can I delete them?
These are core dumps - memory images from failed processes. You don't need them unless you are in a position to analyze program crashes with a debugger (or if you submit bug reports to the authors who are).
However, if the numbers (usually process IDs) are consecutive, it looks like your processes always crash eventually - this should be a cause of worry.
Related
When I try to load a form in the designer, it shows "runtime error 0" and produces a log file which contains:
Line 15: Cannot load control xxxx; license not found.
But the control in question DOES NOT have any licensing restrictions. It has no installer and requires only registration (regsvr32).
Not only that, but for years this had worked without any problems and only just recently this has started. It affects a number of forms which have any controls from a particular OCX.
So it appears that something is fooling VB6 into either thinking a license check has failed, or at least to show a nonsensical error message.
I have tried to trace this using Process Monitor but I couldn't spot any useful clues in the logs. At least, nothing which was obviously problematic.
Any ideas what could cause this? I'm at a loss so far to find a cause.
Thanks
I'm assuming this is a third-party OCX... Many such products came with their own installer which generates the license file; simply copying, and even regsvr32ing the .ocx is not sufficient to use it in the development environment. If you still have the original installation routine, you can try running that to regenerate the license. Failing that, you could look for an appropriately-named .lic file on an existing, working development machine (in \Windows\System32, or the VB6 installation directory, or in the directory into which the .ocx is installed) and manually copy that to the same place on the new development machine.
(Answering my own question, should anyone else run into this again).
As far as I can determine this error was caused by either a subtly corrupt FRX file and/or an FRM/FRX file pair being out of sync.
By going back in source control I could eventually locate a revision where there was no problem. This alone seemed to eliminate anything in the computing environment from being the cause. (ie, bad VB6 installation, disk space, etc. etc.)
I manually re-did certain changes and brought that older code back up to date, and so far the problem has not reappeared.
EDIT the struck-out text was not incorrect but was not specific enough -- I have since learned what seems to be the root cause.
The problem was that we loaded a 32-bit ICO file (icon) into an imagelist in one of the VB6 forms. Now, traditionally 32-bit color icons were not usable in VB6 and you would get an error even trying to do this. However for some reason certain Windows PCs will now allow this - which can be a time bomb.
The problem is: forms saved that way can cause the errors in this question when run on a different PC which does NOT support such icons.
This will occur in the IDE when the form is loaded, OR if a compiled EXE is run on a different computer which respects the original VB6 icon limitations!
I don't know why the totally meaningless "licensing" error message is shown when this happens.
In my case we didn't intentionally introduce this icon, it was a mistake, and so it took a LONG time to debug and eventually figure this out (plus some very valuable advice from people on VBForums).
I've created a different question specifically to try and get at what underlying element of Windows has changed causing this problem.
I have a cocoa app which uses core data. Everything seems to be working fine.
However, in a very specific scenario the app was behaving very strangely for our client.
In particular the logs shows this appearing in the output many times (which I've never seen in my testing):
Core Data: annotation: -executeRequest: encountered exception = Updating max pk failed: with userInfo = {
NSSQLiteErrorDomain = 14;
}
Has anyone ever seen this message and do you know what it means? I've tried googling it but found no information other than a few message boards regarding the Growl app having similar problems, with no solution yet available.
Sorry that I can't be more specific regarding what causes this as I'm not even sure myself. I know how to reproduce this on the client's machine but this message seems very random.
I was hoping someone could give me some more information as to what this error means exactly so that I can maybe narrow it down some more. Right now I'm pretty clueless.
Note: This appears on a macbook pro running 10.7.2 (if that matters).
Thanks for any kind of help you can provide, even something vague would help me at this point.
Update:
The managed context "save" method also fails with the following error:
The operation couldn’t be completed. (Cocoa error 134030.)
This is not really a Core Data problem as such, but more an issue of you process running out of file descriptors.
Each process has a limited number of file descriptors. If you run out, Core Data (and many other things) will stop working, because they can no longer open files -- any they'll fail.
First of all, make sure you're not leaking file descriptors, i.e. make sure you close files when you no longer need them.
I'm not sure what kind of changes you're trying to track. Take a look at Tracking File-System Changes.
If you're on 10.7, take a look at dispatch sources and DISPATCH_SOURCE_TYPE_VNODE for a very powerful tool to track file system changes (corresponds to kqueue, but is easier to use).
Core Data also gives this error in a Sandboxed app when it tries to save DB to a location where it doesn't have full read/write access to (if a user opens file for example, Core Data will be able to read/write this file, but not anything else to the same folder).
Core Data fails to write the temporary _journal file to this folder and reports this error.
I've asked the very same question here :
Why does my program say "folder does not exist" when run on Windows 2008?
but none of the answers were satisfying and my problem still exists , so I decide to ask it in another way with more detail cause this problem really irritate me and we need to solve this , otherwise we have to write the similar application in another language which means waste of our time.
program written in delphi 7(32 bit)
environment running this program is : windows 2008 r2 64-bit
the task program try to do : creating 3 folders then copy an sound file and compress it using lame commmand line (lame.exe) and save changes into database
error I get : "THE 'folder' does not exist . the file might have been moved or deleted , Do you want to create it?" and it cause the program become halted
things I have done :
1- try to run the program as an administrator
2- check eventlog but no clue
3- triple check the required folder and all of them was correct
4- read this KB: http://support.microsoft.com/kb/927387
BUT still I am seeing this bloody error.
I have uploaded the picture of the error here as you see it clearly :
http://i28.tinypic.com/9to6qr.jpg
The folder name is C:\Upload_ABC\\2010\07\27\:
please notice I haven't written that unwanted dialog-box inside my program I believe windows 2008 attach it or bring it on my application.
please please please give me some idea or let me know what should I do ?
best regards.
C:\Upload_ABC\\2010\07\27\
You have two backslashes in your path. Use debugger to see why.
Have you checked the access rights for that folder structure with regard to the account the Delphi program is running from? Windows Server systems tend to be more restrictive in what a user is allowed to do than Windows on workstations are.
In addition I suggest to strip down a copy of the program to the relevant functionality to show the error. With this you get at least a chance that anyone around may test it on another system.
Furthermore you can try to compile it with D2010 and see wether the error persists. If it does, you might have a chance to find the problem running the D2010 debugger. If you don't have D2010 at hand, you might install the trial just for this purpose.
What is between the two consecutive backslashes in your path? Is there really nothing between them or have some characters been removed because they are Unicode and D7 doesn't support Unicode?
As there is nothing in between the two consecutive backslashes...
It does sound like Windows is getting its grubby little fingers in between your program and your access of the files. Either the folders have not been created, or you are being denied access once they have. And as the changes you are trying to store in your database involve compressed files, virtualization seems to be the culprit as explained by the link you yourself provided.
A couple of avenues to try:
Remove any compatibility settings on your exe (right click|properties|Compatibility tab) that could trigger Windows to butt in. Also don't forget this can be triggered by things like "setup" or "update" as part of the executable name.
"Save your application's data in a folder under your user profile."
Such as c:\users\\documents or some such (better not hardcode it in actual production code, but ok for debugging). That after all is exactly the advice the linked msdn article is giving for scenario 2 "you cannot find the files or folders you just created"
If you can't debug on the machine where it is running, go back to old school debugging: add trace messages to your code to show where in the code you are (and have been) and show them in a memo on a separate form or some such.
Make sure you don't "eat" any exceptions that could give you extra information about what is going on.
We've been plagued for several years by occasional reports from customers about a non-descript error message "Cannot set allocations" that appears on startup of our app. We have never been able to reproduce the problem in our own test environments so far. I have now run out of ideas for attempting to track this down. Here's a collection of observations that have accumulated over time:
Error message text reads "Cannot set allocations" (note absence of punctuation).
The window title simply reads "Error" (or the localized equivalent).
The "Cannot set allocations" text is always in English regardless of OS locale.
I have so far not been able to locate the DLL or EXE containing the message text.
Google is chock full of reports of this error for a variety of different products - but no solutions.
The only unifying aspect between the affected products I could make out so far was that they all appear to come in the form of DLLs that load into third-party processes (such as addins for Visual Studio or Windows Explorer shell extensions).
Our app is actually a shareware COM-addin for MS Outlook, written in Delphi (i.e. native code - no .NET).
The prime suspect in our case is the third-party licensing wrapper that we're using which decrypts and uncompresses our DLL into memory on the fly. Obviously I couldn't simply give an unprotected version of our app to the affected customers to verify this suspicion. Maybe the other vendors that this has been reported against are using similar products.
Debug versions of the protection wrapper supplied to us by the licensing vendor yielded no results: The log files looked exactly the same as from sessions where the error did not occur. Apparently the "inner" DLL gets decrypted and uncompressed all right but for some reason still fails to get loaded by the host process.
By creating an unprotected "loader" DLL we have been able to pinpoint the occurrence of the error somewhere behind the LoadLibrary call that is supposed to load our DLL into memory.
Extensive logging and global exception hooks in our own code (both the unprotected loader and the protected "core"-DLL) yielded no results at all. The error is obviously raised somewhere else.
The problem described in this earlier question of mine was very probably prompted by the same issue. This was before we created the unprotected loader stub.
The error only occurs at about 1-2% of our customers - whereas typically all installations at any affected customer's site are affected the same.
Sometimes the error goes away after we release a new version but often it will come back again after a couple of weeks or months.
Once the error has started to occur on a machine it does so consistently.
The error never occurs while connected to the affected machine via remote access (e.g. VNC, RDP, TeamViewer, etc.) and none of the affected customers are within travel distance from us so all we have to go by is log files and "eye-witness reports".
One customer reported that the error message dialog apparently was non-modal, i.e. he was able to simply move the dialog box to the side and continue working with the application (minus the functionality that our DLL would have provided). Not sure whether this is universally true in all other occurrences, too.
In some cases customers have been able to permanently rid themselves of the error by disabling or uninstalling other addins from other vendors that were sharing the host application with our own product.
The error has so far been observed on Windows XP, Vista and 7.
During the last few weeks we had a surge of reports from Outlook 2003 / Windows 7 users. Could the situation have been made worse by a recent Windows/Office-update?
Does anyone have any experience with this error at all?
Or any more ideas for investigating this?
I have only recently had this happen, which prompted my search and I ended up here. I can tell you that with me for sure it is in windows 7 home premium BUT ONLY WITH IE9 (which I hate by the way) it reduces the user back to the dummy stage and assumes that we have to be repeated flagged about everything.It will keep asking you if you want to disable add ons to speed up load times but usually on things that aren't really the things slowing the browser down in the first place,it is there is too much garbage loading in the first place.But back to the "Cannot set allocations", I for one have never expirianced it in any other browser which is not to say it doesn't happen with them.
This is going to be pure guess-work, but it sounds like maybe your third-party licensing software is trying to load your DLL at a particular location in memory, which - on these failing systems - happens to already be occupied by something else, perhaps a global hook DLL.
If you have a customer who is willing to work with you a bit, it might shed some light on the situation to get a crash dump (e.g., with ADPlus or maybe simpler with Sysinternals' ProcDump) when the error message is showing. That would show what modules are loaded and possibly the callstack (if it is from a message box at the time of the error as opposed to one that is catching an exception after the problem).
I also have experienced the "Cannot set allocations" issue. Royal pain. I had disabled Java, since I did not seem to need it, I used add/remove programs to remove Java from my system. Then I stated to get those errors. I have reinstalled, but disabled Java in IE explorer. Now I do not get the error anymore. Not a programmer, don't know why this happened. Maybe a clue for someone.
Win 7 - 64bit OS IE Explorer 10. Hope this helps someone figure this out. John
I've seen this happen. In my case a global hook dll created a large memory file mapping, perhaps to the memory the licensing dll was counting on.
I see "Cannot set Allocations" when I open google chrome only. Also after that, chrome closes with a msg saying "Whoa chrome has crashed..."
Still no solution :(
Also not a programmer, but it always happens when I open Chrome. It opens second window with error message 'cannot set allocation'. I usually close it and go on my way. if i don't it usually causes a crash. doesnt happen on any other browsers.
I have a VB6 program running on Windows 7. It is copying a large number of files and sometimes FileCopy fails with an access violation (between every 60 and 500 files).
I cannot reproduce it using a single file, only during such mass-copying operations this problem happens.
It makes no difference, if source/target are on hard disks, network shares or CD-ROMs.
What could trigger this problem?
EDIT: My question might be a little bit convoluted, so here's some more data:
Run 1:
Start copying 5.000 files
Access violation on file #983
Access violation on file #1437
Access violation on file #1499
Access violation on file #2132
Access violation on file #3456
Access violation on file #4320
Done
Run 2:
Start copying 5.000 files
Access violation on file #60
Access violation on file #3745
Done
Observations
The affected files are always different
The number of affected files tends to decrease if the same file batch is copied multiple times in succession.
Running as Administrator makes no difference
The application has read/write access to all necessary file system objects
This problem happens on Windows 7 workstations only!
Best guess: Is it possible that another user/application is using the specified file at the time the process is running? (anti-virus scanner, Win7 search indexing tool, windows defender, etc) You might try booting the machine in safe-mood to eliminate any of the background services/apps and try running the process to see.
Is there any consistency in the file types or size of the files causing the issue?
Is the machine low on resources? RAM/Disk Space
You said it occurs on Win7 – is it multiple Win7 machines or just one. (help to rule out system resources vs. software/OS)
Any hints from the event viewer (control panel > admin tools) – doubtful
Does the process take a long time to complete? If you can take the performance hit you might look at destroying and recreating the FSO object after every copy or every X files to make sure there isn’t some odd memory leak issue with Win7/VB6.
Not necessarily a recommended solution but if all else fails you could handle that error and save the files that trigger it in a dictionary/collection and reloop through the process with any those files when done. No guarantee it wouldn’t happen again.
Not enough information (as you probably know). Do you log the activity? If not, it's a good place to start. Knowing whether certain files are the problem, and if the issue is repeatable, can help narrow it down.
In your case I would also trap (and log) all errors and retry N times after waiting N seconds. You could be trying to copy in-use files locked by another process, and a retry may allow time for that lock to go away.
Really, more data is the key, and logging is the way to get it.
Is there any chance your antivirus program or some indexer is getting in the way?
Try creating a procmon trace while reproducing the error and see what is actually failing. With the trace you can see if there is another program causing the issue or if your app is trying to write somewhere it should't (incorrect permissions) or can't (a temp/scratch directory without enough space).
Check out the presentations linked to on the procmon page or Mark Russinovich's blog for some cool examples of using this tool to solve various Windows/application mysteries.
Is there a a hidden/system file in the directory that is potentially blocking it?
Does running the VB6 App with right-click "Run As Administrator" make a difference?
Is the point where it dies at the max # of files in the directory? e.g. Are you sure the upper limit on whatever loop structure you are using in VB6 is correct (Count vs count -1)?