Quick question -- if I code something to respond to "MouseLeftButtonDown" such as the pushing of an image, if I leave the code the same way when I ship the app, will this directly translate to the user pushing their finger down on the same spot, and thus fire the code?
Do I have to change the MouseLeftButtonDown to the gesture listener for this to translate, such that MouseLeftButtonDown is only used in place of non-touch monitors when coding to test things?
THanks!
As corrected by Matt in the comments, the MouseLeftButtonDown event is not the same as an image tap. However, the result would be the same in that if your code works on the emulator, regarding the tapping, then it should work on the device.
You should try and get your app running on a device though as there can be things easily overlooked in the emulator. For example, performance can decrease on your phone since it's likely to be quite a lot less powerful than your PC. Therefore, if your app is performing fine on your PC (emulator), it doesn't necessarily mean you'll get the same speeds on the device.
Related
I'm using opengl es 3.0 API with the android studio ndk to create apps.
But I've encountered a very huge problem. I've created a demo app, all it does it change the background color of the screen from white to black and vice versa, every frame. And so when I go to minimize this app, I still see it rendering the background, mostly at the edges of the screen, and not in full color but still very strongly apparent. And it doesn't go away when I close the app, when I restart the device, or when I run "kill apps" on it. Only a factory data reset fixes the issue, so it's not easy for me to debug this.
This is the relevant code that I'm using for when the app is minimized and receives the APP_CMD_TERMINATE event:
eglMakeCurrent(engine->display,EGL_NO_SURFACE,EGL_NO_SURFACE,EGL_NO_CONTEXT);
eglDestroySurface(engine->display,engine->surface);
engine->display = EGL_NO_DISPLAY;
engine->surface = EGL_NO_SURFACE;
I've error checked that eglDestroySurface() is successful.
And I've put debugging messages in to make sure that the main draw loop is NOT executing when the app is minimized. But the problem persists and I don't know what to do about it. Thanks for any help.
UPDATE: well, no one has responded, and I still don't know what to do. Could it be related to threads?
UPDATE: Still can't determine what it is, but for some reason it's messing with the System UI. Willing to upload my entire source code somewhere if someone would be willing to go through this with me, as I'd really like to be able to continue working on my game engine.
Is it the "Strict Mode" developer option on the device settings, perhaps?
That one flashes the screen if an app is blocking.
It would explain why a factory reset changes behaviour.
The answer is not a solution here. The above comment by the user columbo was correct.
I've demoed switching from black to white at high framerates on 3 different android devices, and also my Linux Desktop, all via the openGL api, and it has exhibited this issue on all the devices. So what he said must be correct: this is a problem with LCD monitor technology itself. Interestingly, doing completely random colors does not cause this problem.
I want to simulate hardware key Back from PC. It's for automation test. I use windows phone test framework by expensify, but it do not support real device.
This can't be done on the real device unless you use robots (I am talking with LessPainful and this may happen one day!)
If this is required for your real device automation tests now, then the only things I can suggest are:
that you hook a new custom command into the automation stack and then respond to that command by calling Back on the RootFrame's navigation stack.
this might not be a perfect simulation of what would happen for a real back button press (e.g. if a modal dialog is up) - in which case you'll need to engineer code into your app to simulate the flow of the back press.
if you ask around on XDA developers then someone might have a solution for you (there are ways to hack the OS on your test phont...)
I am in the process of porting a Flash Player-based game over to the Desktop (OSX and Windows) via Adobe AIR (3.1). The porting to AIR itself has gone rather smoothly. The one wrinkle I've been dealt is that the game will be distributed over the Steam network. In order to interact with the Steam Client, I've had to write a native extension to expose the Steam SDK APIs to AS3. The native extension support has been implemented for both platforms, and I have the application launching and communicating with Steam as desired.
The area I've run into trouble is dealing with Steam's Overlay, which renders overtop of games when it is activated. Essentially, when a game is launched, the Steam Client suspends the process in order to hook its Overlay library up to either D3D or OpenGL. Initially, the Overlay failed to appear at all as the AIR application descriptor had the default rendermode set to "auto." However, once I switched the rendermode to "gpu" the Overlay would appear as desired.
On the OSX side of things, everything works as expected. I can toggle in and out of the Overlay just fine. On the windows end of the spectrum, I've hit a bit of a problem when I activate the Overlay. Specifically, when the Overlay is enabled (it's rendering overtop of the game) and I either move the mouse or generate keyboard input, both the Overlay and the game both "freeze" (rendering stops) for 2-3 seconds. Additionally, I have noticed that when I open the Task Manager with the game running, the cpu usage is roughly 75-80%. The cpu usage remains the same when I first active the Overlay (which is desired). However, when I move the mouse cursor or press a key on the keyboard, the cpu usage drops to roughly 1%. This problem has occurred on 4 of 5 windows machines (2 XP, 3 Win 7) we've tested on. Naturally, I first contacted Valve about the issue since this only occurs when the Overlay is enabled. I've uploaded both the OSX and Windows builds for their devs to debug; however, my contact suggested I find out more about AIRs rendering/input as well.
Here is a snippet of a post with a Steam Dev detailing how the overlay works:
"The requirements for the overlay on Windows are as follows:
Game must use D3D7, D3D8, D3D9, D3D10, D3D11, or OpenGL
Game must call D3D Present() or OpenGL SwapBuffers() on a fast regular basis (these calls are hooked by the overlay and give it opportunity to do work). For instance 2D games that only call these functions when mouse movement occurs or graphics on screen actually change rather than every frame will not function well.
Game should use standard Win32 input messages, raw Win32 input messages, or DirectInput for input and the overlay will then detect hotkeys and hide/block input events from the game when active.
It sounds like your game may violate #2 and stops calling Present/SwapBuffers sometimes when the overlay is active. This may happen if you call these functions in response to user input which is now blocked due to the overlay being activated. You should guarantee you keep pumping frames and swapping at a regular interval even if input events aren't occurring."
After a little more prodding, the Valve devs profiled my application to determine if there was any specific problem occuring with the Game Overlay. Unfortunately, they were unable to find anything going on in the Overlay itself. This pretty much means that AIR on Windows doesn't like that the Overlay is blocking Win32 input messages. Here is the Valve dev's response:
"I got your depots and did some testing. Nothing unusual happens in the overlay. Profiling your app with xpref while the issue occurs and taking some minidumps to check callstacks it looks like the app just blocks up completely and uses zero CPU during the time it is blocked, when it happens it calls Present() only at roughly 1 second intervals until it recovers (maybe there is a 1 second timeout somewhere in the AIR code). It's hard to get much detail since I don't have any symbols for the AIR runtime libraries.
It does however look like this is somehow related to input state and AIR being unhappy with win32 input messages stopping. If I change our overlay to not block any input at all once activated (which obviously has some pretty big problems for usability, but just for testing purposes.) then the issue does not occur. It's possible that the AIR code has some weird logic where if it's seen some specific WM_WHATVER message it's expecting another right after and blocks on it waiting somehow.
Hopefully you can work out on your side or with Adobe as to why the application behaves badly in these situations and starts blocking and not presenting at regular intervals."
I've posted on the Adobe forums, but haven't had any such luck over there. Mainly, I'm hoping that someone has either dealt with this before or has an idea about how I could possibly get around the issue. Any suggestions, comments or thoughts would be greatly appreciated!
As it turns out, there is an bug deep in AIR core framework that is the root cause of this issue. Adobe has confirmed the bug, and they are working on a fix for the Cyril (AIR 3.3) release. The status of the bug (#3089755) can be viewed in the Adobe AIR bug list.
In the short-term, I was forced to detect Windows messages that were being consumed by the SteamOverlay, and pass on fake messages to prevent AIR from locking up. I accomplished this by using the Windows API SetWindowsHookEx along with the WH_DEBUG and WH_GETMESSAGE hooks. This is definitely not a desirable approach, but was needed in the short-term until Adobe releases a fix.
I'm doing a phone app with some animations and they look really clunky on the emulator. I don't have a phone yet so this is the only way I can test my app.
Sometimes the animations start late (up to a second after user input) and the they are almost always very jagged. Far from the smooth fades and transitions that I've seen on the interwebs. I'm not using anything hairy - just basic rotations and opacity fades on one or two elements.
Does anyone else see this in the emulator? If not, i guess I have a bug somewhere. If so, is there a work around? Should I bump the priority of the xde.exe in process explorer? Other?
Thanks!
This may be a consequence of gpu detection no working on your system.
You can verify this by checking if you can see the frame rate counters.
Jeff Wilcox – Frame rate counters in Windows Phone
Note the emulator system requirements here also.
Setup and System Requirements for Windows Phone Emulator
I'm looking to target a website specifically for an iPad but we don't have any Macs in house for testing. What's the most accurate way to test the site on a PC? I image I could use the Safari browser and shrink the window down to approximate the iPad screen size but I wonder if there's a better method out there.
If you target a website specifically for a particular device, buy that particular device. This doesn't only apply to iPad.
Two caveats I noticed a lot of websites have for a touch-oriented device like an iPad, iPhone:
The mouse-hover event isn't generated. So, the HTML/CSS/Javascript menu structure which works without clicking on a WebKit browser (like Safari) on a mouse-oriented device might stop working completely.
The scrolling event (coming from a flick of a finger) is not passed to elements inside a page; instead it just scrolls the entire page. A subelement shown with a scroll bar on a non-touch-oriented device might be shown without the scroll bar at all. So, sometimes you lose the ability to scroll inside a subelement.
There might be other caveats. It's really difficult to imagine all the way a device might behave differently from a mouse-oriented device; so, buy an iPad.
By the way, it's of no use to buy a Mac in this situation: Safari on a Mac still behaves (as far as the mouse/touch events are concerned) rather differently from Safari on an iPad/iPhone. An iPad can be paired with a Windows PC.
See this Apple document for a few advices for preparing a web page for the iPad.
I'd just use Safari, as the mobile version uses the same rendering engine (though possibly modified to fit the iPads resources).
It should display the same, if not close.
You can try to use online imitation services.
For example http://app.crossbrowsertesting.com/, or https://saucelabs.com/. They provide lots of imitations environments, for different devices and OS. You can test the site, that is already in the web, or your local files.
I myself am working currently with app.crossbrowsertesting.com for the first time. It really shows the problem, that the client encountered on his iPad. Also have good notices about these services from experienced developer, a friend of mine.