Using windows 7, Is it possible to turn on Internet Connection Sharing but rather than using the built in dhcp provided by windows, I want to use my own app to handle that. Is there a way to turn off the provided dhcp server.
You can un-check the "Automatically Configure IP" option on clients so that they do not receive the DHCP lease and assume IPs that are specified in the IP configuration page. But I am not sure how they will identify which client is hosting the network that is sharing the internet connection.
Related
Have you ever been able to connect to a host, while you have the "Host Name" selected? I can only ever connect to a host when I select "IP Address".
I had the same problem. I discovered that it has to do with firewall settings. In order to connect via hostname you need to have "File and Printer Sharing" enabled in Windows Firewall.
I did some quick testing just now and it appears that you only need to have File Sharing open on the XAE PC, not the target.
EDIT:
After further research, I believe that using hostnames for connections makes use of NetBios name resolution in Windows. This requires UDP port 137 to be open (strangely, only for inbound connections on the originating PC). Enabling File and Printer Sharing in the firewall opens this port, among others. For more granularity, you can open Advanced Settings in Windows Firewall and enable just File and Printer Sharing (NB-Name-In) under Inbound Rules.
I have set up a new NAS using Open Media Vault. I have installed the WebMin extension to get on to the web gui for configuration. My problem is that I have to be on the same network as my NAS. How can I connect to my NAS from a different network than it is connected to? On the network that it is connected to its IP is 192.168.0.99:1000 for the WebMin gui. How can I access this from a different network?
Setup a VPN to connect to the network that your NAS is on. Once the VPN is connected you can connect to the NAS as if you were on the local network.
You could also possibly setup firewall and/or port forwarding rules depending on how your network is setup but please consider the security issues when doing so.
You could alternatively also try to open the NAS and give it a public IP address and a DNS. This will allow you to setup SSH and FTP as it was any other server.
To SSH remotely over the internet, you need either a permanent IP address or a domain name that is updated to point to the IP address when it changes. The latter requires a dynamic domain name service. A good free one is DuckDNS (duckdns.org). First, use one of the sign-in options such as Google. In the domain line enter your preferred subdomain name.
There is a great guide on how you can do this here: https://forums.freenas.org/index.php?threads/how-to-how-to-access-your-freenas-server-remotely-and-securely.27376/
I am creating an android client app connected to a Java server using sockets. At the moment I am working both on my pc. How can I upload my Java server to an online server so I can set my app to friends and test it?
I used OpenShift but could figure our how and if I can use it for what I want.
Also I looked at Amazon ec2, but they need credit card information, something that I would prefer not sharing for this.
Is there any way I can do this for free?
Thanks
Make sure you have a computer able to connect to the internet, and that can run 24/7. Then run your server on that computer, assume you run it on port 8080. Make sure that your host computer's IP address is it to static, otherwise DHCP will give it a different IP every time it connects to the router.
To allow your friends to connect, unless if they're on the same LAN as your host, you will need to port forward port 80 -> ComputerIP:8080 on your router. Once that's done, you will need to retrieve your router's global IPv4 address from it's configuration page and then send that to your friends.
If they're on the same LAN as your host, then you can just give them the IP address of your host computer.
If you port forwarded your server and you would like to get a host name, like stackoverflow.com, you're going to need to buy that from whoever owns the host name you would like to use. I don't know many details about how to update the DNS servers though.
If your server is local and you would like a host name, then just go onto your router configurations page and tell it to automatically assign each computer the default gateway as the primary DNS and then add a mapping in the router's DNS settings to map the host name to your computer's local IPv4 address. Note that not all routers support this feature.
Edit: You'll also need a good bandwidth to support multiple simultaneous connections.
I googled, followed all the instructions but still stuck, and unable to create a home ftp server.
My internet is from dsl modem -> vonage router -> wifi router
FileZilla server ip is 127.0.0.1 and it works fine when tried from command prompt. But I need it to be accessible from outside.
I enabled ftp on wifi router's web settings page using virtual server setting.
I am stuck at this point, I don't know what else to do further. Any help is greatly appreciated.
Also, if you are planning on accessing your server remotely, (not in your network) you will have to enable port forwarding on your router. (Use the ip address of the machine running the server and use port 21) Otherwise, you only be able to connect while in your LAN.
This pretty much summarizes your needs(via lifehacker.com)
If you're FTP'ing across your home
network (like from your upstairs PC to
your bedroom PC), you can reach the
server by using its internal network
address (most likely something like
192.168.xx.xx.) From the command line, type ipconfig to see what that address
is. If you want to log into your FTP
server over the internet, set up a
memorable URL for it and allow
connections from outside your network.
To do so, check out how to assign a
domain name to your home server and
how to access your home server behind
a router and firewall.
Original Article
How to assign a domain name to your home server
How to access a server behind a router and firewall
You need to be able to access your internal network from the internet. Consider using a service like dynDNS if your router supports it.
I developed a client/server simulation application. I deployed client and server on two different Windows XP machines. Somehow, the client is not able to send requests to the server.
I tried below options:
Pinged server machine successfully from client using ip-address.
Pinged client machine successfully from server using ip-address.
Checked netstat command line tool from both machines. Server is in LISTENING mode and client is in SYS_SENT mode. But the foreign address it is using to send is host name not the ip address.
Pinged server machine unsuccessfully using host name from client.
Pinged client machine successfully using host name from server.
I feel the problem is when the client is trying to connect to the server using the host name.
Could you please let me know how to force an application to use an ip address instead of a host name? Is there any other way to map the host name to an ip address?
Go to your client machine and type in:
nslookup server.company.com
substituting the real host name of your server for server.company.com, of course.
That should tell you which DNS server your client is using (if any) and what it thinks the problem is with the name.
To force an application to use an IP address, generally you just configure it to use the IP address instead of a host name. If the host name is hard-coded, or the application insists on using a host name in preference to an IP address (as one of your other comments seems to indicate), then you're probably out of luck there.
However, you can change the way that most machine resolve the host names, such as with /etc/resolv.conf and /etc/hosts on UNIXy systems and a local hosts file on Windows-y systems.
Try tracert to resolve the hostname. IE you have Ip address 8.8.8.8 so you would use; tracert 8.8.8.8
You could use a C function getaddrinfo() to get the numerical address - both ipv4 and ipv6.
See the example code here
This is hard to answer without more detail about the network architecture. Some things to investigate are:
Is it possible that client and/or server is behind a NAT device, a firewall, or similar?
Is any of the IP addresses involved a "local" address, like 192.168.x.y or 10.x.y.z?
What are the host names, are they "real" DNS:able names or something more local and/or Windows-specific?
How does the client look up the server? There must be a place in code or config data that holds the host name, simply try using the IP there instead if you want to avoid the lookup.
Windows XP has the Windows Firewall which can interfere with network traffic if not configured properly. You can turn off the Windows Firewall, if you have administrator privileges, by accessing the Windows Firewall applet through the Control Panel. If your application works with the Windows Firewall turned off then the problem is probably due to the settings of the firewall.
We have an application which runs on multiple PCs communicating using UDP/IP and we have been doing experiments so that the application can run on a PC with a user who does not have administrator privileges. In order for our application to communicate between multiple PCs we have had to use an administrator account to modify the Windows Firewall settings.
In our application, one PC is designated as the server and the others are clients in a server/client group and there may be several groups on the same subnet.
The first change was to use the functionality of the Exceptions tab of the Windows Firewall applet to create an exception for the port that we use for communication.
We are using host name lookup so that the clients can locate their assigned server by using the computer name which is composed of a mnemonic prefix with a dash followed by an assigned terminal number (for instance SERVER100-1). This allows several servers with their assigned clients to coexist on the same subnet. The client uses its prefix to generate the computer name for the assigned server and to then use host name lookup to discover the IP address of the assigned server.
What we found is that the host name lookup using the computer name (assigned through the Computer Name tab of the System Properties dialog) would not work unless the server PC's Windows Firewall had the File and Printer Sharing Service port enabled.
So we had to make two changes: (1) setup an exception for the port we used for communication and (2) enable File and Printer Service in the Exceptions tab to allow for the host name lookup.
** EDIT **
You may also find this Microsoft Knowledge Base article on helpful on Windows XP networking.
And see this article on NETBIOS name resolution in Windows.