Program is part of the Xenomai test suite, cross-compiled from Linux PC into Linux+Xenomai ARM toolchain.
# echo $LD_LIBRARY_PATH
/lib
# ls /lib
ld-2.3.3.so libdl-2.3.3.so libpthread-0.10.so
ld-linux.so.2 libdl.so.2 libpthread.so.0
libc-2.3.3.so libgcc_s.so libpthread_rt.so
libc.so.6 libgcc_s.so.1 libstdc++.so.6
libcrypt-2.3.3.so libm-2.3.3.so libstdc++.so.6.0.9
libcrypt.so.1 libm.so.6
# ./clocktest
./clocktest: error while loading shared libraries: libpthread_rt.so.1: cannot open shared object file: No such file or directory
Is the .1 at the end part of the filename? What does that mean anyway?
Your library is a dynamic library.
You need to tell the operating system where it can locate it at runtime.
To do so,
we will need to do those easy steps:
Find where the library is placed if you don't know it.
sudo find / -name the_name_of_the_file.so
Check for the existence of the dynamic library path environment variable(LD_LIBRARY_PATH)
echo $LD_LIBRARY_PATH
If there is nothing to be displayed, add a default path value (or not if you wish to)
LD_LIBRARY_PATH=/usr/local/lib
We add the desired path, export it and try the application.
Note that the path should be the directory where the path.so.something is. So if path.so.something is in /my_library/path.so.something, it should be:
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/my_library/
export LD_LIBRARY_PATH
./my_app
Reference to source
Here are a few solutions you can try:
ldconfig
As AbiusX pointed out: If you have just now installed the library, you may simply need to run ldconfig.
sudo ldconfig
ldconfig creates the necessary links and cache to the most recent
shared libraries found in the directories specified on the command
line, in the file /etc/ld.so.conf, and in the trusted directories
(/lib and /usr/lib).
Usually your package manager will take care of this when you install a new library, but not always, and it won't hurt to run ldconfig even if that is not your issue.
Dev package or wrong version
If that doesn't work, I would also check out Paul's suggestion and look for a "-dev" version of the library. Many libraries are split into dev and non-dev packages. You can use this command to look for it:
apt-cache search <libraryname>
This can also help if you simply have the wrong version of the library installed. Some libraries are published in different versions simultaneously, for example, Python.
Library location
If you are sure that the right package is installed, and ldconfig didn't find it, it may just be in a nonstandard directory. By default, ldconfig looks in /lib, /usr/lib, and directories listed in /etc/ld.so.conf and $LD_LIBRARY_PATH. If your library is somewhere else, you can either add the directory on its own line in /etc/ld.so.conf, append the library's path to $LD_LIBRARY_PATH, or move the library into /usr/lib. Then run ldconfig.
To find out where the library is, try this:
sudo find / -iname *libraryname*.so*
(Replace libraryname with the name of your library)
If you go the $LD_LIBRARY_PATH route, you'll want to put that into your ~/.bashrc file so it will run every time you log in:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/path/to/library
Update
While what I write below is true as a general answer about shared libraries, I think the most frequent cause of these sorts of message is because you've installed a package, but not installed the -dev version of that package.
Well, it's not lying - there is no libpthread_rt.so.1 in that listing. You probably need to re-configure and re-build it so that it depends on the library you have, or install whatever provides libpthread_rt.so.1.
Generally, the numbers after the .so are version numbers, and you'll often find that they are symlinks to each other, so if you have version 1.1 of libfoo.so, you'll have a real file libfoo.so.1.0, and symlinks foo.so and foo.so.1 pointing to the libfoo.so.1.0. And if you install version 1.1 without removing the other one, you'll have a libfoo.so.1.1, and libfoo.so.1 and libfoo.so will now point to the new one, but any code that requires that exact version can use the libfoo.so.1.0 file. Code that just relies on the version 1 API, but doesn't care if it's 1.0 or 1.1 will specify libfoo.so.1. As orip pointed out in the comments, this is explained well at here.
In your case, you might get away with symlinking libpthread_rt.so.1 to libpthread_rt.so. No guarantees that it won't break your code and eat your TV dinners, though.
You need to ensure that you specify the library path during
linking when you compile your .c file:
gcc -I/usr/local/include xxx.c -o xxx -L/usr/local/lib -Wl,-R/usr/local/lib
The -Wl,-R part tells the resulting binary to also look for the library
in /usr/local/lib at runtime before trying to use the one in /usr/lib/.
Try adding LD_LIBRARY_PATH, which indicates search paths, to your ~/.bashrc file
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/path_to_your_library
It works!
The linux.org reference page explains the mechanics, but doesn't explain any of the motivation behind it :-(
For that, see Sun Linker and Libraries Guide
In addition, note that "external versioning" is largely obsolete on Linux, because symbol versioning (a GNU extension) allows you to have multiple incompatible versions of the same function to be present in a single library. This extension allowed glibc to have the same external version: libc.so.6 for the last 10 years.
cd /home/<user_name>/
sudo vi .bash_profile
add these lines at the end
LD_LIBRARY_PATH=/usr/local/lib:<any other paths you want>
export LD_LIBRARY_PATH
Another possible solution depending on your situation.
If you know that libpthread_rt.so.1 is the same as libpthread_rt.so then you can create a symlink by:
ln -s /lib/libpthread_rt.so /lib/libpthread_rt.so.1
Then ls -l /lib should now show the symlink and what it points to.
I had a similar error and it didn't fix with giving LD_LIBRARY_PATH in ~/.bashrc .
What solved my issue is by adding .conf file and loading it.
Go to terminal an be in su.
gedit /etc/ld.so.conf.d/myapp.conf
Add your library path in this file and save.(eg: /usr/local/lib).
You must run the following command to activate path:
ldconfig
Verify Your New Library Path:
ldconfig -v | less
If this shows your library files, then you are good to go.
running:
sudo ldconfig
was enough to fix my issue.
I had this error when running my application with Eclipse CDT on Linux x86.
To fix this:
In Eclipse:
Run as -> Run configurations -> Environment
Set the path
LD_LIBRARY_PATH=/my_lib_directory_path
Wanted to add, if your libraries are in a non standard path, run ldconfig followed by the path.
For instance I had to run:
sudo ldconfig /opt/intel/oneapi/mkl/2021.2.0/lib/intel64
to make R compile against Intel MKL
All I had to do was run:
sudo apt-get install libfontconfig1
I was in the folder located at /usr/lib/x86_64-linux-gnu and it worked perfectly.
Try to install lib32z1:
sudo apt-get install lib32z1
If you are running your application on Microsoft Windows, the path to dynamic libraries (.dll) need to be defined in the PATH environment variable.
If you are running your application on UNIX, the path to your dynamic libraries (.so) need to be defined in the LD_LIBRARY_PATH environment variable.
The error occurs as the system cannot refer to the library file mentioned. Take the following steps:
Running locate libpthread_rt.so.1 will list the path of all the files with that name. Let's suppose a path is /home/user/loc.
Copy the path and run cd home/USERNAME. Replace USERNAME with the name of the current active user with which you want to run the file.
Run vi .bash_profile and at the end of the LD_LIBRARY_PATH parameter, just before ., add the line /lib://home/usr/loc:.. Save the file.
Close terminal and restart the application. It should run.
I got this error and I think its the same reason of yours
error while loading shared libraries: libnw.so: cannot open shared
object file: No such file or directory
Try this. Fix permissions on files:
cd /opt/Popcorn (or wherever it is)
chmod -R 555 * (755 if not ok)
I use Ubuntu 18.04
Installing the corresponding -dev package worked for me,
sudo apt install libgconf2-dev
Before installing the above package, I was getting the below error:
turtl: error while loading shared libraries: libgconf-2.so.4: cannot open shared object file: No such file or directory
I got this error and I think its the same reason of yours
error while loading shared libraries: libnw.so: cannot open shared object
file: No such file or directory
Try this. Fix permissions on files:
sudo su
cd /opt/Popcorn (or wherever it is)
chmod -R 555 * (755 if not ok)
chown -R root:root *
A similar problem can be found here.
I've tried the mentioned solution and it actually works.
The solutions in the previous questions may work. But the following is an easy way to fix it.
It works by reinstalling the package libwbclient
in fedora:
dnf reinstall libwbclient
You can read about libraries here:
https://domiyanyue.medium.com/c-development-tutorial-4-static-and-dynamic-libraries-7b537656163e
I have installed GO, setup the paths but when i run a file i get this error:
error!! exec: "sqlboiler": executable file not found in $PATH
exec: "sqlboiler": executable file not found in $PATH
exec: "sqlboiler": executable file not found in $PATH
exit status 3
What is going wrong?
The installation instructions are good, https://go.dev/doc/install. However, for me un Ubuntu 20.4 in wsl2, the suggested path for the binaries wasn't enough. Only go and gofmt are added to /usr/local/go/bin.
I did add the below to my .bashrc, since go install puts the binaries in this location on my system.
export PATH="$HOME/go/bin:$PATH"
Note, that the path to the binaries may differ on your system, so you have to adjust it accordingly.
Any binary you install with go install that is added to this path will be available to your shell afterwards.
For example:
$ go install github.com/volatiletech/sqlboiler/v4#latest
$ go install github.com/volatiletech/sqlboiler/v4/drivers/sqlboiler-psql#latest
$ whereis sqlboiler
sqlboiler: /home/blue/go/bin/sqlboiler
Potentially, you also need some database packages to your system. I am not sure on this any more. For example, you could add some Postgres libs if you are using Postgres. You have to see if it works without.
apt-get install postgresql-client-common postgresql-client-12
How to properly install GO with paths and all?
Install Go with the installer (Windows) or archive (extract into /usr/local on Linux/Mac).
When installing from archive, manually add the directory path where the go binary is located (/usr/local/go) to PATH.
Set GOPATH to a directory path wherein to contain bin, pkg and src sub-directories.
Add ${GOPATH}/bin to PATH.
What is going wrong?
The program you are running is trying to run the executable sqlboiler, which cannot be found in any of the directories specified in PATH.
I hit this error message while trying to build gnote using GNU Autotools.
I had first run:
$ git clean -xf # to clean the tree of untracked files, then
$ autoreconf # to create the script named `configure`, and finally
$ ./configure # to check my system, and create Makefiles from their templates
Neither po/Makefile.in.in nor po/Makefile.in exist in the source tree that I downloaded.
Yet configure needs to make this po/Makefile, as called for in the root Makefile.am in this line:
SUBDIRS = data src po help
Where do I get, or how do I make, po/Makefile.in.in?
Like all Gnome related packages, gnote uses many steps of buildsystem setup beyond just running autoreconf.
The autogen.sh script gnote comes with should run all the required steps to set up the buildsystem.
As usual, run the autogen.sh script with the --help parameter if you want to call configure separately.
po/Makefile.in.in is created by running intltoolize from the intltool package. It needs to be run from the project tree's root directory.
There isn't much documentation on intltoolize that I could find except for the brief man page, but it's source code says that that it's a fork of an older utility called libtoolize, and it's a relatively short script.
(BTW, if you don't already have intltoolize installed, you can figure out which package installs it, with this: sudo apt-file find intltoolize.)
*.in files are templates used by AutoMake to create a Makefile.
.in.in is a soft link to /usr/share/intltool/Makefile.in.in.
I installed the latest Cygwin on my Windows 7 machine: version 2.893 (64-bits). I made sure I included cmake, i.e. I was able to add several packages by running the Cygwin net release setup program again, after doing the first installation. I then tried to use cmake and made sure I invoked it from the bin directory:
user008#L0147816 /bin
$ ./cmake
CMake Error: Could not find CMAKE_ROOT !!!
CMake has most likely not been installed correctly.
Modules directory not found in
//share/cmake-3.6.2
Usage
cmake [options] <path-to-source>
cmake [options] <path-to-existing-build>
Specify a source directory to (re-)generate a build system for it in the
current working directory. Specify an existing build directory to
re-generate its build system.
Run 'cmake --help' for more information.
I don't know where the build directory could be. I'm relatively new to Cygwin. I hope somebody has found a solution for getting cmake installed and working properly under Cygwin.
This looks cmake 101.
Assuming you want to just build a software download from somewhere
eg gl2ps:
# choosing a test area
$ cd /tmp
# downloading source
$ wget http://geuz.org/gl2ps/src/gl2ps-1.4.0.tgz
# expanding source code
$ tar -xf gl2ps-1.4.0.tgz
$ ls gl2ps-1.4.0-source/
CMakeLists.txt COPYING.LGPL gl2ps.h gl2ps.tex gl2psTestSimple.c
COPYING.GL2PS gl2ps.c gl2ps.pdf gl2psTest.c README.txt
# preparing a build area
$ mkdir build
$ cd build
# invoking cmake and pointing to the source directory
$ cmake ../gl2ps-1.4.0-source/
-- The C compiler identification is GNU 7.3.0
[cut ...]
-- Configuring done
-- Generating done
-- Build files have been written to: /tmp/build
# running the build
$ make
Scanning dependencies of target shared
[ 11%] Building C object CMakeFiles/shared.dir/gl2ps.o
...
[ 88%] Building C object CMakeFiles/gl2psTestSimple.dir/gl2psTestSimple.o
[100%] Linking C executable gl2psTestSimple.exe
[100%] Built target gl2psTestSimple
Instead for learning how to build with cmake, go to
https://cmake.org/cmake-tutorial/
Here a solution I just found.
Let's name 3 directories:
{cygwin64-path}/bin/: cmake.exe is here.
{cygwin64-path}/usr/share/: cmake module directory (such as cmake-3.20.0) is here.
{cygwin64-path}/share/: cmake.exe trying to find cmake-module-directory here, but it doesn't exist.
It's wired because cygwin install cmake-module-directory in {cygwin64-path}/usr/share/, but cmake.exe looks for the directory in {cygwin64-path}/share/.
So solution is simple. Each one below works.
METHOD 1: Create the directory {cygwin64-path}/share/ and copy all relevant directories and files from {cygwin64-path}/usr/share/ to the new directory.
METHOD 2: Create a Symbolic links {cygwin64-path}/share/ to {cygwin64-path}/usr/share/.
In windows 10 Administrator cmd.exe: mklink /J share usr\share and all works.
Or use WSL or Cygwin64 Terminal: ln -s usr/share share
I am trying to install the zeroMQ for my server(redhat 7). Here is what I did:
1) download the zeroMQ and unpack it.
2) navigate to the file where I put the zeroMQ and run the commands below:
./configure
make
make install
Now I can find two head files in /usr/local/include: zmq.h and zmq_utils.h and five files in /usr/local/lib: libzmq.a libzmq.la libzmq.so libzmq.so.4 libzmq.so.4.0.0.
Then I try to code like this:
#include <zmq.h>
...
void * context = zmq_init(1);
But I get this error message: undefined reference to `zmq_init'
I find that the include works well but it cant find 'zmq_init', so maybe it's the problem of lib files. But all of the lib files have been in /usr/local/lib, right?
What should I do?
Problem solved:
I got that error message because the lib files are in the directory: /usr/local/lib
What we need to do is to create a file named local-lib.conf under the directory /etc/ld.so.conf.d/ and write /usr/local/lib in it. The name of the file is not important but its extension must be .conf.
Then, we must navigate to /etc/ld.so.conf.d/ and type this command: sudo ldconfig
I tried the fix provided by #Yves above, but that didn't work out for me so here's another way for Debian/Git installations.
Alternative fix:
I have faced this issue on a Docker container which was occuring due to the libzmq/czmq which was installed by cloning the git repo.
The problem is that the shared libraries when installed using git are located in the /usr/local/lib folder instead of /usr/lib/ where usually, in my case a C/C++ program looks for shared library files.
I fixed it by copying all files from /usr/local/lib folder to/usr/lib/ using the command
$ sudo cp -R /usr/local/lib/* /usr/lib
This was for a RPi/ Ubuntu-16.04 docker, the command or location of the files may vary depending on your OS.