I've added several directories, libraries such as matlab, opencv, etc to compile my current C file in Visual Studio project.
All my upcoming projects will require the same setup/properties. Do I need to setup my each project's properties individually or I can do something to apply it to all ?
Try using Property Sheets. These can create a single properties file that can be inherited by multiple projects.
Use "View > Other Windows > Property Manager" to bring up the Property Manager. It will show your projects and configurations.
Right click a configuration, and select "Add New Project Property Sheet...". You can name it, and select a location that works for all your projects.
Once created, you can edit its properties just as you would a build configuration.
To use that property sheet as the basis for other projects, just right click the configuration or project, and select "Add Existing Property Sheet...". Browse to where you saved the original sheet, and it will be inherited.
Any changes to the original sheet will be applied to any project that inherits it, unless they are overridden. If you go into properties higher up the chain, properties that override will have bold type for their values. To get them to always use the value in the base sheet, there will be a "inherit from parent or project defaults" option where applicable.
I am using AtmelStudio 6.1, which is built on Visual Studio 2010 (I believe), and yet doesn't have any Property Manager that I can find.
So, the hackish system I use is:
close (or at least unload via the contextual menu) the project whose configuration you want to modify
open its .cproj file (which is XML) in any text editor (VS works nicely),
MAKE A BACKUP COPY OF IT SOMEWHERE ELSE JUST IN CASE,
open the .cproj file of the project whose configuration data you want to copy,
look for the configuration data you want. Configurations are inside of PropertyGroup tags; for example, in my case it looks like
<PropertyGroup Condition=" '$(Configuration)' == 'Preprocess only' ">
for the configuration named "Preprocess only". Copy from the beginning of that tag until the end of the corresponding
</PropertyGroup>
tag.
Paste the block into the destination .cproj, just after other
</PropertyGroup>
tag. Make sure that the name of the configuration is unique in this file. Save.
You're finished. Now open the project normally in VS and you'll be able to select the added configuration.
For Visual Studio 2010+ you can make a Project Template.
If you choose to automatically add the template to Visual Studio in the template creation wizard, when you create/add a new project, the template will appear (after restarting Visual Studio). Projects created with this template will have the same project properties!
To add source code files to the template, the easiest way is to rearrange the source code files in solution-explorer to be in the root (not under any folder). After doing that, THEN generate the template.
Why? Sometimes putting your files under the default Source Code solution-explorer folder (not in file explorer, the .project.filters label) will fail to copy the source file to the template, you'll see "the document cannot be opened. it has been renamed deleted or moved" when you try to use the template and the file you wanted in the template will NOT be in the file explorer.
If you do want solution-explorer folders, you will have to add them manually to the template by unzipping the template folder, making changes, then re-zipping it again.
For example, literally copy and paste the source files you want the template to have in the template folder and edit the .vstemplate file. M$ Doc on template editing.
<TemplateContent>
<!-- put new file references here and/or in your .vcxproj .vcxproj.filters -->
TargetFileName="HelloWorld.cl">HelloWorld.cl</ProjectItem>
<ProjectItem ReplaceParameters="false"
</TemplateContent>
Related questions:
How do I use VS template I created?
How can i load a template I have created in Visual Studio?
How copy visual studio project?
Simply copying and pasting entire projects and solutions is not recommended for complex or shared projects since various GUID s and filenames may overlap - causing bugs.
For MSVS 2017, the process #AaronMK mentioned doesn't work. Instead do the following:
View -> Other Windows -> Property Manager
Add New Property Sheet.
Edit whatever options you want there.
Give it an appropriate name so that you remember it.
Right button on it and hit "Save {myPropertySheet}"
It would be wise to place it alongside the default property sheets and that you can add it whenever you want (by Property Manager -> Add Existing Property Sheet -> Browse to its location). This directory is: C:\Users\{myUsername}\AppData\Local\Microsoft\MSBuild\v4.0
Alternatively you can edit the default property sheets and use these by default. I wouldn't advice it though as they provide a fallback option in case you mess up. So make backups first if editing default files.
Related
Context: setting up the Assembly Name/Default namespace in the Project Properties (right click on project, Properties, Application tab; or edit the .csproj).
I would like to add a parameter there to explicitly have them following the Project Name, plus some custom suffix. So if I rename my project, the Assembly name/namespace follow that rename.
Example: project named foo → foo_suffix.dll. If I rename the project to foo1 → foo1_suffix.dll.
Same behaviour for the namespace.
Reading Common macros for MSBuild commands and properties,
I tried inputting $(ProjectName) both in VS and in the .csproj file, but I get a .dll named exactly like that.
How can I get this done?
How can I get this done?
1. Try using $(MSBuildProjectName) property from this document.
You're developing a C# project(csproj) while your document above is about macros in C++ projects(vcxproj). So I think $(MSBuildProjectName) property can be more suitable for you after my several tests.
(I tried $(ProjectName), but it only worked well when I set something like <AssemblyName>$(ProjectName)</AssemblyName>, if I add a suffix like $(ProjectName)_suffix, the output sometimes is _suffix.dll. But it always work well if I use $(MSBuildProjectName)!)
I get the desired behaviour, but that is inconsistent with what I can
see in project, Properties, Application tab.
2. Try reloading the project file(Right-click project, unload.., reload...) to Update the UI.
From your comment, it seems like the $(ProjectName)_suffix works well in your machine? If so, you can still use $(ProjectName) property.
What you experienced is expected behavior for Msbuild and VS. VS will read value from csproj during project loading process. Then it display the related value by UI.
So after we rename the project name and then build the project, we can get a ProjectName_suffix.dll in output folder. But the UI is still not changed(inconsistent), cause now we need to Update the UI.
You can right-click project node, unload the project=>reload the project to get UI updated. And now the output xx.dll can be consistent with what you see in project, Properties, Application tab. It needs us to reload the project each time after you rename the project, then the UI would be consistent with your xx.dll. And actually it won't affect your build though the UI is not updated, the output can be your desired behaviour.
3. All above is more related to the relationship between Assembly Name and Project Name. One point you should know is msbuild(csproj) won't modify the source files(xx.cs) after the project is created.
So assuming you have a Class1.cs file whose namespace is Library. If you rename the project to NewLibrary, reload the project and you can see the Namespace is NewLibrary now in project, Properties, Application tab. But the namespace for Class1.cs file is still old Library. This is expected behavior in VS, and the new NameSpace NewLibrary would work if you create a new xx.cs file.
Hope all above helps :)
I am using Advanced Installer with Visual Studio 2010.
I managed to create an .aip project, but when I want to add the files from the relevant VS projects, I have to choose the exact location of these files.
I want to use more then one build configuration so I can use config transforms to change my .config files depend on the build configuration I choose.
This is a problem for me because when I compile in Debug the .exe & .dll files goes to bin\Debug, but when I compile in, lets say, Staging these files goes to bin\Staging.
How can I get Advanced Installer to get the right files, meaning get them from the target folder of the build configuration I chosen?
Advanced Installer does not support this by default, but with a little bit of tweaking you can get this working. Let me explain how:
the first requirement is to have your output folders generated by VS in the same parent folder, as you have them both placed in "bin\".
now you need to open your project in Advanced Installer GUI and do the following:
create two builds in Media page, called Debug and Staging
create a property called "Configuration" or what name would you like, from Install Parameters page
in the New Property dialog you will have options to set per-build values for your property. Set them to "Debug" and "Staging", i.e. the names of the folders created by VS
now go to File -> Options -> Path Variables and define a new path variable with your full path for the debug/staging, the one you current have in the project.
from the Home tab, in the toolbar, use the "Convert Paths" wizard and then save the project.
Now, it comes the tricky part, you will need to edit the project file in a text editor, like Notepad++, capable of saving the file in UTF-8 format. Once you open the file look for this XML node:
<COMPONENT cid="caphyon.advinst.msicomp.AppPathsComponent">
<ROW Name="BIN_DIR" Path="<your path>\bin\Debug" Type="2" Content="0"/>
You might have multiple variables here if you are already using this feature. You need to edit the value and replace "Debug" with "[|Configuration]".
Now you can save and build the project and it should pickup the correct files for each of the two builds.
Usually, visual studio puts output files to bin/debug or bin/release.
When solution contains a large number of projects its not easy to modify each project output manually.
Also edits in csproj files no desirable, because some of them is shared between solutions..
My questions: Is anybody knows a tool, which can quickly configure output path ?
UPDATE: my problem solved by TFS Build
Presumably you have at least one project in each solution that is unique to that solution. In the Post-Build event of that, copy the contents of each project's output to the required location.
We often to this using a batch file. It's crude but effective. In our project that's unique to the solution we create a Release.bat file. This contains a number of file copies to copy all of the required components from the various output directories of the other projects. You can then just run the batch file in the post build event. We usually copy everything to a "Latest Release" fodler when the solution is built. If this becomes a proper release we will rename the Latest Release folder to the actual release number.
If you have multiple build configurations, or even just use the Debug and Release configurations, you can use an If statement in the Post-Build event to decide which batch file to run. So you could create a Debug.bat, Release.bat etc which do what you need. It can be tedious to set them up and get them working correctly at first, but they are very useful once fully implemented.
Customize your project using the msbuild properties which you can do if you follow these steps:
Go to the solution explorer and unload one project by right clicking on it and select Unload Project.
Then right click again on the unloaded project and select Edit Project. This will open the XML definition of your project, and you will have intellisense for the layout which will help you perform the next steps.
In the visual studio editor find the first PropertyGroup tag and add these lines near or at the end of the closing PropertyGroup tag:
<SolutionDir Condition="$(SolutionDir) == '' Or $(SolutionDir) == '*Undefined*'">..\</SolutionDir>
<BuildDirectory Condition="$(BuildDirectory) =='' or $(BuildDirectory) == '*Undefined*'">$(SolutionDir)\build\</BuildDirectory>
The above SolutionDir is defined in msbuild properties which you can obtain using this answer: msbuild script using solution information and also check out the well known msbuild properties here
The next step is to find the OutputPath tag for each configuration and edit it like this:
<OutputPath>$(BuildDirectory)\x86\AutomatedDebug\</OutputPath>
The example above assumes you have a configuration named AutomatedDebug with destination platform x86.
The output will be
x:\projects\whereever-your-solution-is\build\x86\AutomatedDebug\
Repeat for each project.
To unload more than one project, collapse all projects in the solution explorer and shift click or ctrl click to select all or some projects, then right click on the selected group to unload, unfortunately you cannot do this for editing, at least in visual studio 2010.
I am the first to admit that this is somewhat cumbersome to do for existing projects, but you could easily create a visual studio project template that has these settings changed so that new projects will use a more convenient default output directory.
You cannot edit the output directory directly in visual studio because the project properties editor escapes any $() enclosed text.
Also you could only modify the OutputPath using the name of a system environment variable enclosed in $(). This last option is to enable a global output directory.
If you build any single project modified in this way using msbuild directly in the commandline the output directory will be created one directory above from where you ran msbuild
..\build\x86\AutomatedDebug
If you are in a team, you should warn them not to edit the output directory directly by hand, as this action will overwrite any customization.
Hope this info is useful.
Greetings.
When adding a new item in a Visual C++ project, the default path for the new file is the project path. Are there any per-project or per-solution settings that allow this default path to be modified?
For example, to add new files by default to a subdirectory of the project folder, or even to somewhere outside the project folder?
I understand that filters can be used to automatically organize files visually within the Solution Explorer based on file extension, but I would like to actually place the physical file in another location without the need to browse to it.
I'm using a Visual C++ project as a container to to manage and organize (filter) editing of runtime-compiled files, and don't want developers to accidentally place new files outside of the intended folder, nor do I want the project file to exist in this code folder.
I did discover that if you create a new file in a sub directory of the project, that the Add Item dialog will default to that path when you add another file during that session, but it does not persist the default to the project or solution for future sessions.
I don't believe there's anything built-in. Some commercial add ins make the behavior better. For example, Whole Tomato's Visual Assist X package always uses the same directory as the currently open file, IIRC.
There are a couple of open source add ins that let you modify the behavior. For example, this one.
I would like to make a copy of my project. I would rather not start doing it from scratch by adding files and references, etc. Please note that I don't mean copy for deployment. Just plain copy.
Is there a tool in VS to do this? I am using VS 2008
Just create a template;
From your project choose: Project - Export Template
The wizard will let you define
Template name
Template Description
Icon
Preview image
Then it zips up your project into 'My Exported Templates' directory.
You also have the option to make your template available when you create a new project.
When you use your template to create a new project, the namespace will be correct for 'your_new_project_name' throughout every file, all references correct, everything perfecto :)
You can send the .zip file to anybody, and they must copy (not unzip) the .zip file into Templates\ProjectTemplates directory for them to use too.
I made an ASP.NET MVC template with folders, layout page, viewmodels etc arranged just how I like them.
NOTE:
If you have an empty folder in your project, it WON'T be added to the template, so I just added an empty class appropriate to each folder, and a sample picture for images folder.
If you want a copy, the fastest way of doing this would be to save the project. Then make a copy of the entire thing on the File System. Go back into Visual Studio and open the copy (by right clicking on solution => add existing project => open the copied project). From there, I would most likely recommend re-naming the project/solution (Steps of Safely Renaming Project are in the following link) so that you don't have two of the same name, but that is the fastest way to make a copy.
It is highly NOT ADVISABLE to copy projects at all because the some config files formed internally like .csproj, .vspscc etc. may (and most probably will) point to references which belong to previous solutions' location and other paths/locations in system or TFS. Unless you are an expert at reading these files and fixing references, do not try to copy projects.
You can create a skeletal project of the same type you intend to copy, this creates a proper .csproj, .vspscc files. Now you are free to copy the class files,scripts and other content from the previous project as they will not impact. This will ensure a smooth build and version control (should you choose to be interested in that)
Having said all this, let me give you the method to copy project anyhow in a step-wise manner:
Go to the project you want to copy in solution explorer and right-click.
Now select 'Open Folder in File Explorer' (Assuming you have the solution mapped to a local path on your disk).
Select the Projects you want to replicate as whole folders(along with all dependencies,bin .vspscc file, .csproj file)
Paste them in your desired location (it could be your same solution folder or even another solution folder. If it is within the same solution folder, then you would be required to rename it, also the .csproj and other internal files to the new name).
No go back to Visual Studio, Right-Click on Solution > Add > Existing Project...
Browse and select the Project file (.csproj file) now from the location you placed it in and select 'open'
This file now appears in the solution explorer for you to work.
You may now have to resolve a few build errors probably with duplicated/missing references and stuff but otherwise it's as pristine in logic and structure as you expected it to be.
I guess if this is something you do often, there's a little (non-free) utility that promises to do it for you: I haven't used it, so not sure how good it is:
http://www.kinook.com/CopyWiz/
There is also this project on CodePlex:
http://clone.codeplex.com/
I will probably give the codeplex project a try, and if it doesn't work I'll manually rename everything and edit the sln file.
I follow these steps and I use the development tool called Resharper ,which is awesome by the way:
So,
Copy the existing project folder to the destination you want
Go to source control and with right click just to the root folder you want and pick "Add items to folder...".Then, a wizard will come up to choose the files to copy (there is no need for some files and the wizard guides you for that reason by default).
Change the name of the solution file (*.sln)
Change the names of the sub-projects if exist.
Use Resharper to change the binding namespaces name (I will automatic do the dirty job with safety).The alternative way is to manually change all namespaces with the new name.
The same action with method names.
Check solution's properties if you want to change.
That's it. You are ready!!!
Following Shane's answer above (which works great BTW)…
You might encounter a slew of yellow triangles in the reference list.
Most of these can be eliminated by a Build->Clean Solution and Build->Rebuild Solution.
I did happen to have some Google API references that were a little more stubborn...as well as NewtonSoft JSon.
Trying to reinstall the NuGet package of the same version didn't work.
Visual Studio thinks you already have it installed.
To get around this:
1: Write down the original version.
2: Install the next higher/lower version...then uninstall it.
3: Install the original version from step #1.
The best way is actually to create a new Project from scratch, then go into the folder with the project files you want to copy over (project, form1, everything except folders).
Rename the files (Except for form1 files) for example: I copied Ch4Ex1 files into my Ch4Ex2 project but first renamed the files to Ch4Ex2.
Copy and paste those files into the Solution Explorer for the new project in Visual Studio.
Then just overwrite the files and you should be good to go!
Old thread but I hope it helps anyone looking for this answer!
The easiest way to do this would be to export the project as a template and save it to the default template location. Then, copy the template into the exact same directory on the location you want to move it to. After that, open up visual studio on the new location, create a new project, and you will get a prompt to search for a template. Search for whatever you named the template, select it and you're done!
I have a project where the source files are in in a folder below the project folder. When I copied the project folder without the source folder and opened the copied project, the source files are not missing but found at the old location. I closed the project, copied also the source folder, and re-opened the project. Now, the project magically references the copied source files (both the new path showed up on "save as" and a change in a file has been saved in the copied version).
There is a caveat: If not both old and new project folders are below a used library folder, the above-mentioned magic discards also the absolute reference to the library and expects it under the same relative path.
I tried this with VS Express 2012.
My solution is a little bit different - the computer that the package resided on died and so I was forced to recreate it on another computer.
What I did (in VS 2008) was to open the following files in my directory:
- <package name>.djproj
- <package name>.dtproj.user
- <package name>.dtxs
- <package name>.sln
- Package.dtsx
When I did this a popup window asked me if the sln file was going to be a new solution and when I clicked 'yes' everything worked perfectly.
After trying above solutions & creating copy for MVC projects
For MVC projects please update the port numbers in .csproj file, you can take help of iis applicationhost.config to check the port numbers. Same port numbers will cause assembly loading issue in IIS.
I use Visual Studio 2013 where Project > Export Template is not an option. Here is what I use to clone a project.
From your solution:
File > Export Template > select project to make template from, note save path
Download and install VS 2013 SDK Here
Create new VSIX project under Extensibility
From the VSIXManifest Dialog select the Assets tab
Fill in the Author textbox
Choose "Project Template" for Type and Browse to add the exported template (saved at path you noted in step 1)
Save and build the VSIX project. Go to the VSIX project's .../bin/Debug folder and double click to run the .vsix file
Start new instance of Visual Studio and you should see your template under whatever project type your template is. Create a new project from your template
You will have to re-add any dll references
Trick the Clone from repository tool
Open the project location in file explorer.
Copy the path to any browser (aka open the project location in the browser).
Use the address from the browser as the source repository for cloning.
Relax and enjoy the no error clone.