I have a certain problem with my Makefile.
With this command, I can compile all my *.c files to *.o which works well:
$(OBJ) : %.o : %.c $(LDSCRIPT) Makefile
$(CC) $(ARM9_INCLUDES) -c $(CFLAGS) $< -o $#
But now I'm wondering, what if I want to run -O3 optimization on just ONE particular file, and have -O0 on the rest?
Is there any command to add a different rule for a specific file?
What I'm doing right now is compiling each C file with its own rules, which is very annoying because I have around 30 files which makes the Makefile huge, and every time I change something in one file it compiles EVERYTHING again.
particular_file.o : CFLAGS+=-O3
(assuming GNU make) see target-specific variable values in GNU Make manual
(and the immediately following pattern-specific variable values, maybe).
Also note, that commands are used from the most specific rule for given file, so you can have in case target-specific variable value is not sufficient:
particular_file.o : particular_file.c
completely_special_compiler -o $# $<
%.o : %.c
$(CC) $(CFLAGS) -o $# $<
It's possible to make the solution a bit more extensible.
Suppose you need to compile one set of files in one way and the other set of files in another way, rather than having only one exception, and you could identify patterns in those two sets of files, e.g. one set starts with "a", and the other set starts with "b", you can do something like this:
a%.o : a%.c
completely_special_compiler -o $# $<
b%.o : b%.c
$(CC) $(CFLAGS) -o $# $<
For more explanation, see Static Patterns.
Related
This is my first Makefile, and I am can't figure out some of the syntax used. The questions are marked below.
$(BUILD_DIR)/%.o: %.c $(BUILD_DIR)
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $#
What is the usage of "$(BUILD_DIR)" in the dependency?
What is the meaning of "$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $#" in the role?
As with most computer languages the syntax of make cannot be clear if you don't know it. If you are using GNU make the GNU make manual is your friend. In the following explanations I will assume that BUILD_DIR = build and that one of the source files is bar/foo.c.
$(BUILD_DIR) in the list of prerequisites (dependencies) tells make that the build directory (in which object files are supposed to go) must exist before the recipe is executed; logical. There must be another rule somewhere to create the directory if it does not exist yet. Something like:
$(BUILD_DIR):
mkdir -p $#
But unless you forgot to copy an important character, this dependency is terribly sub-optimal. As the last modification time of a directory changes each time its content changes (files or sub-directories added or removed), it will force the re-compilation of all source files every time the directory changes, which is not what you want. A better dependency would be order-only:
$(BUILD_DIR)/%.o: %.c | $(BUILD_DIR)
that tells make to consider only the existence of $(BUILD_DIR), not its last modification time, when deciding to re-build or not.
$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $# is just a combination of make automatic variables and functions.
$< and $# expand as the first prerequisite (bar/foo.c) and the target (build/bar/foo.o) respectively.
$(<:.c=.lst) replaces .c by .lst in $<: bar/foo.lst.
$(notdir $(<:.c=.lst)) removes the directory part: foo.lst.
All in all, for a bar/foo.c source file, and with BUILD_DIR = build, the pattern rule would be equivalent to:
build/bar/foo.o: bar/foo.c | build
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=build/foo.lst bar/foo.c -o build/bar/foo.o
Note that there are two different situations to consider:
All your source files are in the same directory as the Makefile (no bar/foo.c, just foo.c). Then you can simplify your recipe:
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(<:.c=.lst) $< -o $#
because the $(notdir...) is useless.
Your source files can be in sub-directories (bar/foo.c). Then you need the $(notdir...) in your recipe. But be warned that if you have two source files with the same base name (bar/foo.c and baz/foo.c) you will have a name conflict for $(BUILD_DIR)/foo.lst and your Makefile will not work as expected. Moreover, the order-only prerequisite of the rule should be equivalent to build/bar (or build/baz), not just build. And there should be a rule to create it if needed. If it is your case I suggest to change your pattern rule for:
$(BUILD_DIR)/%.o: %.c
mkdir -p $(dir $#)
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $#
There are other solutions (secondary expansion...) but there are a bit too complicated for this already too long answer.
CC=g++
CFLAGS=-c -Wall
LDFLAGS=
SOURCES=main.cpp hello.cpp factorial.cpp
OBJECTS=$(SOURCES:.cpp=.o)
EXECUTABLE=hello
all: $(SOURCES) $(EXECUTABLE)
$(EXECUTABLE): $(OBJECTS)
$(CC) $(LDFLAGS) $(OBJECTS) -o $#
.cpp.o:
$(CC) $(CFLAGS) $< -o $#
What do the $# and $< do exactly?
$# is the name of the target being generated, and $< the first prerequisite (usually a source file). You can find a list of all these special variables in the GNU Make manual.
For example, consider the following declaration:
all: library.cpp main.cpp
In this case:
$# evaluates to all
$< evaluates to library.cpp
$^ evaluates to library.cpp main.cpp
From Managing Projects with GNU Make, 3rd Edition, p. 16 (it's under GNU Free Documentation License):
Automatic variables are set by make after a rule is matched. They
provide access to elements from the target and prerequisite lists so
you don’t have to explicitly specify any filenames. They are very
useful for avoiding code duplication, but are critical when defining
more general pattern rules.
There are seven “core” automatic variables:
$#: The filename representing the target.
$%: The filename element of an archive member specification.
$<: The filename of the first prerequisite.
$?: The names of all prerequisites that are newer than the target,
separated by spaces.
$^: The filenames of all the prerequisites, separated by spaces. This
list has duplicate filenames removed since for most uses, such as
compiling, copying, etc., duplicates are not wanted.
$+: Similar to $^, this is the names of all the prerequisites separated
by spaces, except that $+ includes duplicates. This variable was
created for specific situations such as arguments to linkers where
duplicate values have meaning.
$*: The stem of the target filename. A stem is typically a filename
without its suffix. Its use outside of pattern rules is
discouraged.
In addition, each of the above variables has two variants for
compatibility with other makes. One variant returns only the directory
portion of the value. This is indicated by appending a “D” to the
symbol, $(#D), $(<D), etc. The other variant returns only the file
portion of the value. This is indicated by appending an “F” to the
symbol, $(#F), $(<F), etc. Note that these variant names are more than
one character long and so must be enclosed in parentheses. GNU make
provides a more readable alternative with the dir and notdir
functions.
The $# and $< are called automatic variables. The variable $# represents the name of the target and $< represents the first prerequisite required to create the output file.
For example:
hello.o: hello.c hello.h
gcc -c $< -o $#
Here, hello.o is the output file. This is what $# expands to. The first dependency is hello.c. That's what $< expands to.
The -c flag generates the .o file; see man gcc for a more detailed explanation. The -o specifies the output file to create.
For further details, you can read this article on linoxide about Linux Makefiles.
Also, you can check the GNU make manuals. It will make it easier to make Makefiles and to debug them.
If you run this command, it will output the makefile database:
make -p
The $# and $< are special macros.
Where:
$# is the file name of the target.
$< is the name of the first dependency.
The Makefile builds the hello executable if any one of main.cpp, hello.cpp, factorial.cpp changed. The smallest possible Makefile to achieve that specification could have been:
hello: main.cpp hello.cpp factorial.cpp
g++ -o hello main.cpp hello.cpp factorial.cpp
pro: very easy to read
con: maintenance nightmare, duplication of the C++ dependencies
con: efficiency problem, we recompile all C++ even if only one was changed
To improve on the above, we only compile those C++ files that were edited. Then, we just link the resultant object files together.
OBJECTS=main.o hello.o factorial.o
hello: $(OBJECTS)
g++ -o hello $(OBJECTS)
main.o: main.cpp
g++ -c main.cpp
hello.o: hello.cpp
g++ -c hello.cpp
factorial.o: factorial.cpp
g++ -c factorial.cpp
pro: fixes efficiency issue
con: new maintenance nightmare, potential typo on object files rules
To improve on this, we can replace all object file rules with a single .cpp.o rule:
OBJECTS=main.o hello.o factorial.o
hello: $(OBJECTS)
g++ -o hello $(OBJECTS)
.cpp.o:
g++ -c $< -o $#
pro: back to having a short makefile, somewhat easy to read
Here the .cpp.o rule defines how to build anyfile.o from anyfile.cpp.
$< matches to first dependency, in this case, anyfile.cpp
$# matches the target, in this case, anyfile.o.
The other changes present in the Makefile are:
Making it easier to changes compilers from g++ to any C++ compiler.
Making it easier to change the compiler options.
Making it easier to change the linker options.
Making it easier to change the C++ source files and output.
Added a default rule 'all' which acts as a quick check to ensure all your source files are present before an attempt to build your application is made.
in exemple if you want to compile sources but have objects in an different directory :
You need to do :
gcc -c -o <obj/1.o> <srcs/1.c> <obj/2.o> <srcs/2.c> ...
but with most of macros the result will be all objects followed by all sources, like :
gcc -c -o <all OBJ path> <all SRC path>
so this will not compile anything ^^ and you will not be able to put your objects files in a different dir :(
the solution is to use these special macros
$# $<
this will generate a .o file (obj/file.o) for each .c file in SRC (src/file.c)
$(OBJ):$(SRC)
gcc -c -o $# $< $(HEADERS) $(FLAGS)
it means :
$# = $(OBJ)
$< = $(SRC)
but lines by lines INSTEAD of all lines of OBJ followed by all lines of SRC
With the following makefile snippet:
main: main.o f1.o f2.o
$(CC) $(CFLAGS) -o program main.o f1.o f2.o
main.o: main.cc
$(CC) $(CFLAGS) -c main.cc
f1.o: f1.cc
$(CC) $(CFLAGS) -c f1.cc
f2.o: f2.cc
$(CC) $(CFLAGS) -c f2.cc
If I just change one file, only that file get recompiled when I rerun make, as desired. However, I'm having a hard time generalizing this without having to list each file individually. When I try something like:
$(OBJECTS): $(SOURCES)
$(CC) $(CFLAGS) -o $# -c $(patsubst %.o,%.cc,$#)
It builds each object file individually, but each object file depends on ALL my sources, so a change in any one file causing a full recompile. What's a good way to accomplish this?
Basically,
you do have to list each .o file's dependencies individually.
For example, each .o is likely to depend on a different bunch of headers.
Taking your f1.o, you need something like:
f1.o: include/i.h
f1.o: another.h dir/and-another.h
f1.o: f1.cc
$(CC) $(CFLAGS) -c f1.cc
(you can have as many dependency lines for a target as you like).
Maintaining that list is a nightmare.
Broken dependency lists render your Makefile worse than useless—you might as well use a batch file.
All is not lost!
If you are tidy,
you can get the compiler to do it automatically,
and pretty much for free.
Makes your Makefile tidier to boot.
Win Win.
As Ismail Badawi commented, pattern rules provide a nice solution. They are a type of implicit rule for make. Basically, implicit rules are automatic recipes based off the file extension. For example, make knows how to convert .c files into .o files implicitly. By default make will run the following recipe for .c files (see the rule catalogue):
$(CC) $(CPPFLAGS) $(CFLAGS) -c
You can modify the process either by setting the variables CC, CPPFLAGS, and CFLAGS, or by defining a pattern rule:
%.o: %.c
$(CC) $(CFLAGS) -c $<
The "$<" above matches the name of the first prerequisite, which will be the .c file in this example. See Beta's comment and automatic variables.
If I have the following rule in a makefile:
$(OBJ)/%.o: $(SRC)/%.c
$(CC) -c -o $# $< $(CFLAGS)
Every file matching the prefix ./obj/ and sufix .o will have its stem passed to %, so I can provide some dependencies based on its name.
But, suppose I have this kind of rule, which I specify one by one the targets I want:
OBJECTS=abc.o bca.o cba.o
$(OBJECTS): $(SRC)/%.c
$(CC) -c -o $# $< $(CFLAGS)
How do I make the % stem actually work for the current target name make is executing? Just using % doesn't work, neither $#.
Note that I'm trying to write the actual target name to its own dependency. For example, when make is executing the rule for abc.o, it would include $(SRC)/abc.c and just it (something like $(patsubst %.o, $(SRC)/%.c, MAGIC_TARGET_NAME_VARIABLE)).
You can just replace this rule:
$(OBJECTS): $(SRC)/%.c
with:
$(OBJECTS) : %.o : $(SRC)/%.c
You will need to add the $(OBJ) to the -o part of the recipe if you still want them built there:
$(OBJECTS) : %.o : $(SRC)/%.c
$(CC) -c -o $(OBJ)/$# $< $(CFLAGS)
I’m not completely clear on what you’re asking, but I think this accomplishes what you’re trying to do:
OBJECTS=abc.o bca.o cba.o
.PHONY: all
all: $(OBJECTS:%=obj/%)
$(OBJ)/%.o: $(SRC)/%.c
echo $(CC) -c -o $# $< $(CFLAGS)
All .o files are built; each .o file is built using only the .c file corresponding to it; and if you want to refer to the list of all object files or source files in the command for compiling a .o file, then you can reference ${OBJECTS} directly.
If this isn’t what you’re trying to do, you’ll be able to get a better answer by listing the input files you have, the output files you want to make, the input dependencies of each output file, and what compilation command you want to execute for each output file.
CC=g++
CFLAGS=-c -Wall
LDFLAGS=
SOURCES=main.cpp hello.cpp factorial.cpp
OBJECTS=$(SOURCES:.cpp=.o)
EXECUTABLE=hello
all: $(SOURCES) $(EXECUTABLE)
$(EXECUTABLE): $(OBJECTS)
$(CC) $(LDFLAGS) $(OBJECTS) -o $#
.cpp.o:
$(CC) $(CFLAGS) $< -o $#
What do the $# and $< do exactly?
$# is the name of the target being generated, and $< the first prerequisite (usually a source file). You can find a list of all these special variables in the GNU Make manual.
For example, consider the following declaration:
all: library.cpp main.cpp
In this case:
$# evaluates to all
$< evaluates to library.cpp
$^ evaluates to library.cpp main.cpp
From Managing Projects with GNU Make, 3rd Edition, p. 16 (it's under GNU Free Documentation License):
Automatic variables are set by make after a rule is matched. They
provide access to elements from the target and prerequisite lists so
you don’t have to explicitly specify any filenames. They are very
useful for avoiding code duplication, but are critical when defining
more general pattern rules.
There are seven “core” automatic variables:
$#: The filename representing the target.
$%: The filename element of an archive member specification.
$<: The filename of the first prerequisite.
$?: The names of all prerequisites that are newer than the target,
separated by spaces.
$^: The filenames of all the prerequisites, separated by spaces. This
list has duplicate filenames removed since for most uses, such as
compiling, copying, etc., duplicates are not wanted.
$+: Similar to $^, this is the names of all the prerequisites separated
by spaces, except that $+ includes duplicates. This variable was
created for specific situations such as arguments to linkers where
duplicate values have meaning.
$*: The stem of the target filename. A stem is typically a filename
without its suffix. Its use outside of pattern rules is
discouraged.
In addition, each of the above variables has two variants for
compatibility with other makes. One variant returns only the directory
portion of the value. This is indicated by appending a “D” to the
symbol, $(#D), $(<D), etc. The other variant returns only the file
portion of the value. This is indicated by appending an “F” to the
symbol, $(#F), $(<F), etc. Note that these variant names are more than
one character long and so must be enclosed in parentheses. GNU make
provides a more readable alternative with the dir and notdir
functions.
The $# and $< are called automatic variables. The variable $# represents the name of the target and $< represents the first prerequisite required to create the output file.
For example:
hello.o: hello.c hello.h
gcc -c $< -o $#
Here, hello.o is the output file. This is what $# expands to. The first dependency is hello.c. That's what $< expands to.
The -c flag generates the .o file; see man gcc for a more detailed explanation. The -o specifies the output file to create.
For further details, you can read this article on linoxide about Linux Makefiles.
Also, you can check the GNU make manuals. It will make it easier to make Makefiles and to debug them.
If you run this command, it will output the makefile database:
make -p
The $# and $< are special macros.
Where:
$# is the file name of the target.
$< is the name of the first dependency.
The Makefile builds the hello executable if any one of main.cpp, hello.cpp, factorial.cpp changed. The smallest possible Makefile to achieve that specification could have been:
hello: main.cpp hello.cpp factorial.cpp
g++ -o hello main.cpp hello.cpp factorial.cpp
pro: very easy to read
con: maintenance nightmare, duplication of the C++ dependencies
con: efficiency problem, we recompile all C++ even if only one was changed
To improve on the above, we only compile those C++ files that were edited. Then, we just link the resultant object files together.
OBJECTS=main.o hello.o factorial.o
hello: $(OBJECTS)
g++ -o hello $(OBJECTS)
main.o: main.cpp
g++ -c main.cpp
hello.o: hello.cpp
g++ -c hello.cpp
factorial.o: factorial.cpp
g++ -c factorial.cpp
pro: fixes efficiency issue
con: new maintenance nightmare, potential typo on object files rules
To improve on this, we can replace all object file rules with a single .cpp.o rule:
OBJECTS=main.o hello.o factorial.o
hello: $(OBJECTS)
g++ -o hello $(OBJECTS)
.cpp.o:
g++ -c $< -o $#
pro: back to having a short makefile, somewhat easy to read
Here the .cpp.o rule defines how to build anyfile.o from anyfile.cpp.
$< matches to first dependency, in this case, anyfile.cpp
$# matches the target, in this case, anyfile.o.
The other changes present in the Makefile are:
Making it easier to changes compilers from g++ to any C++ compiler.
Making it easier to change the compiler options.
Making it easier to change the linker options.
Making it easier to change the C++ source files and output.
Added a default rule 'all' which acts as a quick check to ensure all your source files are present before an attempt to build your application is made.
in exemple if you want to compile sources but have objects in an different directory :
You need to do :
gcc -c -o <obj/1.o> <srcs/1.c> <obj/2.o> <srcs/2.c> ...
but with most of macros the result will be all objects followed by all sources, like :
gcc -c -o <all OBJ path> <all SRC path>
so this will not compile anything ^^ and you will not be able to put your objects files in a different dir :(
the solution is to use these special macros
$# $<
this will generate a .o file (obj/file.o) for each .c file in SRC (src/file.c)
$(OBJ):$(SRC)
gcc -c -o $# $< $(HEADERS) $(FLAGS)
it means :
$# = $(OBJ)
$< = $(SRC)
but lines by lines INSTEAD of all lines of OBJ followed by all lines of SRC