I'm using XCode 4.0.2 to upload my iPhone app to the iTunes app store but get the following error messages:
Failure instantiating web-service client
An exception has occurred: Unable to open url: https://contentdelivery.itunes.apple.com/WebObjects/MZLabelService.woa/ws/MZITunesProducerService?wsdl
Could not connect to Apple's web service
Unable to authenticate the package: 450416349.itmsp
I've got the latest Java version (1.6) and have double checked the network settings in the Java preferences.
Any ideas?
Got to the bottom of it. Running a TCP dump on our firewall discovered that some (but not all) of the requests that XCode made were using the configured proxy, and others were not.
We allowed the proxy to be bypassed completely to test and it all worked fine.
Have you tried using Application Loader? Try that and see if it works. Hope this helps.
Related
as the title suggests I've used the react native expo quick start guide and managed to setup a basic project. Everything worked just fine until it came to making fetch requests to my local server by laravel 8. It seems both android and ios don't allow making http calls unless you change some config in your android folder which I don't have for using expo. Tried googling for my answer but I keep running into dead ends. Is there any way to enable this or should I try migrating my back-end temporarily to heroku or something similar? Thank you for reading.
Edit: Forgot to mention each time i make a call to the wrong route I immediately get Network error while hitting the right routes throws an unresolved promise
I’m having an issue with the spring boot dashboard. When I start an app the icon show the loading icon and never reaches the green up icon though the app does start and accepts requests. When I stop the app it takes a couple of minutes to stop.
I have access to another machine where the dashboard behaves as expected.
I’m using the getting started rest service app (gs-rest-service-complete) targeting spring boot 1.4.3.release with no modifications. I’m using sts 3.8.3.
I’m experiencing the issue on OSX El Capitan 10.11.6
My jdk version is 1.8.0_112
I've found a couple of similar questions but the suggestions don't resolve my issue.
This one relates to bad entry in hosts file - mine is ok (Spring Boot Dashboard projects never finish starting)
This one suggests switching life-cycle-bean support off, but I want to know how to use run the dashboard with it enabled. The response to this question also requests a sample app, as stated I'm using the gs-rest-service-complete sample app (STS Spring Boot Dashboard Doesn't Recognize Successful Start)
What might be causing this problem?
It sounds like the machine where it doesn't work might have some kind of firewall stopping the JMX connections. These connections are made via sockets. Firewall type software sometimes prevents the connections. If you know of firewall type software running on your machine you could try disabling it or (less drastically) trying to reconfigure it so it allows connections between different processes running on your machine.
I am a total newbie which has started learning Ruby so please be patient with me.
I am doing Ruby challenges where I need to run a Ruby file that launches a web server on my computer. First I run this application in command line with a command:
ruby app.rb
Then I paste this URL to my browser and access to my local server:
http://localhost:4567
On this local web page I click the link that gets connected to a web server on Internet where I should get authenticated. Till this moment everything works good, but during the authentication I have got an error. If there wasn’t any error during my authorization, the application would retrieve my profile data from the internet server. This is the error that I am getting:
Faraday::SSLError at /callback
handshake alert: unrecognized_name.
I have been trying to resolve this problem for two days. What I have done:
1) I think this error is connected somehow with Java. I tried to run this application with all versions of Java (6, 7, 8) as people said they had the same problem when they updated to a higher java version. Unfortunately, my version of Ruby doesn’t accept Java 6.
2) Possible solution which was posted here SSL handshake alert: unrecognized_name error since upgrade to Java 1.7.0), the same as here in 20 similar posts in Stackoverflow about "handshake alert: unrecognized_name" error, where it is suggested to set the jsse.enableSNIExtension property. But I couldn’t understand any of those answers, specifically, where to apply this code. Then I found this link https://community.jivesoftware.com/docs/DOC-140837 where it was advised to open the Java Control Panel (I did it through System Preferences Java). I went through the Java tab and clicked View and added “-Djsse.enableSNIExtension=false” to the Runtime Parameters and applied it.
3) Another possible solution was found here Disable SNI Extension for Ruby net/http - Using IP address with SSL/TLS (the answer given by ZebGir) but I didn’t find the file *http.rb in my .rvm or even within my whole system.
Please advise any hint or link with the possible solution for my issue.
My system is Mac OS X El Capitan.
RVM version 1.27.
Java version 1.8.
Have you tried disabling the ssl setting for your the faraday library? Something like:
connection = Faraday.new 'https://example.com', :ssl => false
Also see: https://github.com/lostisland/faraday/wiki/Setting-up-SSL-certificates
I've been handed a Genexus KB to make an SD app for it. But each time i want to try it i get a "an error occurred in the application server (Not found)" each time i've ran it in a real device (connected in the internal network thorugh) or in an Android Emulator (Andy).
I've setted the KB to point to a local DB stored in my computer and i've tried different ways to try it and it keeps with no luck.
What else should I do?
PS: when i run the web version of it, there's no problem.
Altight people, first of all thanks for the help you gave me!
Secondly #fpanizza that link you gave me was very useful, I could use CatLog with android emulator Andy (after installing Andy Rootkit) and I found out that my app wasn't reaching REST services in the server which leads me to #Franklin, who was right to let me know that it had to do with REST services and I've found out later that i didn't had installed HTTP Activation at one of the WCF Services at the .Net Framework 4.5 Advanced Services, which allowed to reach REST services, and now it worked.
You can try setting the server URL with the IP of your server.
Is probable that the local host is trying to access itself, the android device.
Service URL property: http://wiki.genexus.com/commwiki/servlet/hwikibypageid?21146
Update
I would do what fpanizza suggests on the comment.
Another troubleshooting idea that may bring some light into problem would be to try to access the rest services from a web navigator on the emulator. The idea would be to validate that the emulator/device can "see" the server. Testing outside the app will help understand if the problem is in the app or the server or the connection device - server.
Thank you #Juan.
For better understanding here I enclose the image.
Control Panel > All Control Panel Items > Programs and Features > Turn Windows features on or off
we are doing worklight app on a android and a desktopenvironment(for facebook) that works fine on the liberty profile server (developer worklight environment).
Know we need to post this app on Facebook but to do this we need to use the https protocol on our WAS server, to do this we set the ip, port, protocol: to our external server, and deploy our app with build for remote server, but when the app tried to call an adapter on the server, the Firefox console returns us this:
[09:58:50.675] "response [https://[publicIP]:[port]/WorklightPocProj/apps/services/../../invoke] success: /*-secure-
{"challenges":{"wl_antiXSRFRealm":{"WL-Instance-Id":"ih80d8pjg6la8ubccb7503b936"}}}*/"
and
[09:58:50.675] "defaultOptions:onFailure Procedure invocation error."
The application security on our WAS server is disabled and the ip/port are reachable too.
if i add to the XML adapter on the procedures securityTest="wl_unprotected" the app runs correctly, but i don't to do this workaround
Is there any configuration that we are missing on the app or in our WAS server?
A lot of time since this question but just for trying to help people that hit this question because of the search "defaultOptions:onFailure Procedure invocation error".
Also facing this issue in Worklight 6.1
In my case I faced this issue because I had the following configuration in the adapter .xml:
<procedure name="anyMethod"></procedure>
This works in the development server, but in a stand alone server (at least in WAS) you have to change it for:
<procedure name="submitAuthentication" securityTest="wl_unprotected"></procedure>
In both cases it is unprotected.