I am doing a site in Wix.com so my wife can maintain it without my input. The draft site is live at:
http://www.wingspan.info
IMPORTANT: The wife is not a techie.
Essentially, the site displays our art work in galleries of paintings, etc, filtered by artist.
I have coded one page, then duplicated that to create the galleries and filter the WixDataQuery according to Andrew or Helen and Categories like Painting, Drawing, Sculpture, iPad Art, etc. Also, where we have exhibited (Exhibitions menu) some of our paintings.
All working, but any change to design and I have to change 15 pages...
So, it now strikes me that it would be more efficient to design one dynamic page, and set up the menu to display the different categories, as it is set up in the live site:
However, I can't find any documentation that shows how to use just the one dynamic page rather than my coded page duplicated to produce 12 different pages. Not clever...
Any suggestions / tutorials where I can find how to do this?
Thanks!
Basically, you want to add the Content Manager to your site if you haven't already, and then set up a collection with all of your data in it. One row per eventual "page" that you want.
Next, you can take the page you already designed and convert it to a dynamic page. It will then have a dataset on the page which you need to connect to various elements on the page through their connect buttons.
Finally, you'll need to edit your menu to point to the various instances of your dynamic page instead of the regular pages you have them pointing to now.
You can read all about how dynamic pages work here and here.
Which is a better User Experience / Design decision for opening a table row (in a business website)? To place an "Open" button like this:
Or, to allow the row to be opened by clicking anywhere on it?
Your question assumes that people understand that there is more information to be gained by "expanding" these rows in this table. As this is designed right now, there are zero hints for a user that they are capable of viewing more information inside the same view that they are using.
Option 1: Open button
Let's assume (dangerously) that people are knowledgable that they can use this table to view more info about a line item in this table. The button itself is separated from the content it is referring to, breaking Fitt's Law. Also, the label is "open", which most users would interpret as taking them to another page, or opening a new context. "View More" or "Expand" would be a better label.
Option 2: Click anywhere
This is slightly better than the button, as it clearly relates the action to the content. However, it still doesn't solve the problem of exposing the functionality to the user.
I would recommend a combination of both of these approaches, making sure you are solving for Fitt's Law as well as exposing a label that will tell the users what functionality is present in these table rows, and how to access them.
We use Square to book appointments in our showroom. In an effort to optimize this booking page, I want to create a funnel and track clicks. According to their documentation it looks like the only way do this is via embed and I do not see anything about appointments in their api documentation.
I really just want to track user clicks within the booking process and create some sort of conversion success page after the booking is complete. Any ideas?
There is not a way to do what you're looking for using the Square API. If you have access to the machine, I'm sure there's some way you could track clicks on the booking page (e.g. using a browser extension), but you wouldn't be able to make any changes to the Square UI.
Incidentally, Square is constantly making improvements to various aspects of the UI so that they will be more effective for all merchants. I do not personally know much about Appointments, but I expect that people are working to optimize it for you :).
my pivotitems each require different odata calls in order to populate data in them.
must i make all those calls when the pivot is intialized or is there a way to fire each call when the user flicks to that pivotitem?
Any example of this will be appreciated.
thanks
You may choose both approaches in different situations.
From user experience view, preload all data is always better. In this situation, when user scrolls to the next page data is already there. Note, that first page you must load as fast as you can (use some delay approaches for other pages, for example).
Write out all pros and cons that you achieve, and you make a right choice ;)
I want to provide my users with an 'advanced' search engine.
I basically have a lot of search criteria to chose from :
some are very simple/common and will be largely use (ie time period, item id)
some are a bit less mainstream
and some won't be used a lot, but I still want to provide them
Overall, I have around 30+ criteria to chose from
The result is a dataset which I display in a grid.
I've search for inspiration on internet, and even google doesn't seem to have a nice solution for advanced search.
I've designed this kind of tools in the past, and I wasn't really pleased by the result, although the user were eventually able to use it quite effectively.
Do you think the search panel should be visible all the time (ie displayed on top of my result grid) or available in a separate form (which would let me use more place for all the controls)
Do you think it's better to display all the search criteria, or to let the user click on 'advanced' if he wants to see/use more criteria
How would you organize the criteria? by usage frequency, or rather by area (ie. criteria related to user, to location, to time, etc.)
Where should I put the 'Search' button? next to the more common search controls, or at the bottom, or both?
And more generally, do you have tips you want to share on how to design a nice search UI ?
What kind of functionalities do you usually miss in this kind of 'advanced' search engines?
Not an expert on UI, but I have seen a lot of bad UI.
KISS is a good start.
Make it intuitive.
Keep the search both at the top and at the bottom. I'd be loathe to use something that forces me to move up the page to type (see Flex documentation, their pagination control is only at the top -- a miserable pain you know where).
Organization of criteria should be two-fold:
basic operators (20%) which 80% will use up-front
dynamically edit the set of criteria available at any time.
Get the users started with least ramp-up time and allow them to add/remove criteria on a as needed basis. The idea is to make him use something he needs and not clutter his thought or workflow with the brilliance of your feature set.
As others have mentioned and is the trend nowadays with UI in general, use controls that are hidden until and unless the user explicitly wants advanced/fine-tuning (on-demand UI).
A good rule of thumb is to have a maximum of 5-7 features on a page.
It'd be great if you can arrange the criteria in such a way so as to make a story out of it i.e. the user can read his query and your operators make some meaning out of it.
I'm a big fan of little text and easy to comprehend icons but such a setup depends on your installation environment. Can your grandkid use that mighty workhorse?
Good design also necessiates that you make your UI accessible. That's a tough nut to crack and I have absolutely no idea how you'd do that.
Best of luck!
I tend to like the "list of rules" approach. You know the one:
Find items that match [ All |v] of these conditions:
[Name |v] [Contains |v] [_____________] (-) (+)
[Start date |v] [Is before |v] [_____________] (+)
(Cancel) (Search)
This keeps the dialog from getting too cluttered but still gives users all the options they might need.
But that assumes you need things to be that advanced! You might find that an intelligently-designed keyword list approach will work fine.
Keep the advanced controls hidden by default. Your search input and action button should always be visible and given prominence, regardless of whether or not your advanced controls are visible. Make sure that showing/hiding the advanced controls does not change the location of either the primary input or button - those need to remain static so the user's spatial memory is not affected.
As for the advanced controls, without knowing exactly what type of data you need to show, I can only give an overview of potential organization methods. Personally, I like LATCH:
Location
Alphabet
Time (timeline or chronology - think of a history museum)
Category (think department stores)
Heirarchy (biggest to smallest, lightest to darkest, etc.
Depending on your controls, one of those will make the most sense. Organize accordingly. If you can use a slider or range input (for example, 'lightest', 'lighter', etc.) rather than a list of checkboxes/radios, this is preferable as it reduces the number of visual elements on the page.
Forget about the "plus/minus 7" rule - that has been taken completely out of context by folks who did not actually read the study. In short - it's only applicable to the human's response to external stimuli, not options displayed on a screen. This isn't saying you should go overboard, but even if you have a lot of options, you can visually tweak them. Clutter is a failure of design - not information.
Remember to use plenty of whitespace and <label> elements to give each option a good-sized click target. This is especially important when dealing with checkboxes or radios.
Make sure that when the results are returned, there is a clear title (<h2> or <h3> usually suffices) re-stating the user's query, and how many results were returned. Don't forget about a 0 results page! Offer some advice on broadening the query, if possible.
Just a general advice: keep it simple. To much choice confuses the user and increases the chance a certain piece of functionality is not used.
Try different prototypes on users to findout which options are valuable and which are not.
1) Do you think the search panel should be visible on top of my result grid?
A simple search panel like Google’s basic search may be on the Results page since it’s compact. This allows the user to re-try the search with different criteria without wasting time going to a new page or window. Advanced search is much more cluttering so there’s a more important tradeoff between easy access to the results (in a smaller pane) and easy access to re-search, so you need to appraise the frequency users re-searching versus the work they do with the results. For example, if re-search happens 50% of the time, but including an Advanced Search panel in the Results page requires additional scrolling 75% of the time, your users are better off without an Advanced Search panel on the Results. As a general rule, Advanced Search should not be on the Results page unless the task is really cut-and-try exploration of the data.
Another issue with the Search panel at the top of the results is what to do if the results do not correspond to the criteria (e.g., if the user changes a criterion after the results are shown but before clicking Search again). With Advanced Search it is much easier for users to forget or miss whether they changed a criterion or not and then be confused about what criteria is in effect for the results. Putting Advanced Search on a separate page prevents this, although there are other ways to avoid this problem if Advanced Search is on the Results page (e.g., using instant-apply “faceted” search).
In any case, the Results page should display the criteria used in making the search.
2) Do you think it's better to let the user click on 'advanced' for more criteria?
For most database apps, users of a particular group (e.g., job position) have 2 to 5 specific sets of search criteria that get them through the vast majority of their work, (e.g., search for orders made between two user-supplied dates), sometimes including criteria that even have specific criterion values (e.g., search for all orders with a pending status). In this situation, users will be fastest and least likely to be confused if you have an Advanced button for ad hoc searching, while the default search has controls tailored for these specific searches. Default to Advanced Search only if your users will primarily be conducting exploratory ad hoc searches.
3) How would you organize the criteria?
If there are certain criteria that are used especially often, then they’re handled through Basic Search as described for 2, so there’s little advantage to sorting criteria in Advanced Search by frequency. It just makes it hard for users to find the criterion they’re looking for. Generally you can rely on users having a specific named field in mind, so sort the criterion alphabetically, or, if users are familiar with the Results Page and its fields are laid out in a manner consistent with how the users think, use the same order as used for the Results columns.
4) Where should I put the 'Search' button?
The Search Button ideally should always be visible. The best solution is to have all the criteria on a scrollable pane with the button outside the pane. Putting the button at the top and bottom is a common but kludgey alternative. I wouldn’t put it by the common criteria because if your users have gone from Basic to Advanced Search, they’re probably not using common criteria. Consider no Search Button if you can keep response time under 500 ms, instead providing instant-apply like seen in Vista.
5) How to design a nice search UI?
For field-based multi-criteria Search, there are two basic designs:
a. A form of all fields with a place to enter criterion values for each field. The problem with this is fields with set values can scroll out of view and users may have forgotten they’ve set a value. Thus you want to keep this as compact as possible. See the chapter Improving Data Retrieval in Alan Cooper’s About Face 2.0 for one approach. You can also provide a summary string of the selected criteria near the Search buttons which the user can check. Clicking each criteria in the string can even jump the user to the criteria for changing it.
b. The user selects from a list of fields those to be used in the criteria, then sets the values for the criteria in consolidated location. The main challenge here is to minimize the number of “overhead” clicks to select a field. Ideally, the list of fields are always available and one click selects the field, puts it in the consolidated location, and places the cursor in the value control, something like shown in http://www.zuschlogin.com/content/blogimages/37/FindAdvanced.gif, only for Search rather than Find. (By arbitrary convention “Find” is very different than “Search” for users; Find highlights things within the current page matching a given criteria while Search retrieves things matching a given criteria)
Both of these designs link the criterion for each field by logical ANDs and are limited in the joins among the underlying database tables, but that is likely satisfy nearly all your users. If the tasks require more complicated joins and Boolean combinations, look into graphical querying designs (e.g., Badre AN, Catarci T, Massari A, & Santucci G 1996. Comparative ease of use of a diagrammatic vs. An iconic query language. In J Kennedy & P Barclay (Eds) Interfaces to Databases (IDS-3): Proceedings of the 3rd International Workshop on Interfaces to Databases, Napier University, Edinburgh, 8-10 July) and Query by Example designs.
The default design pattern which I use is Filter Table. That covers maybe 90% of the use cases. For more complex searches, I would need more specific information on the goals and use cases of the users, so that it would be possible to design a more optimal solution for those situations.
Simple is good. I'd recommend an iterative approach where you slowly build functionality after doing user acceptance testing and watching the logs to see which features that they use (or don't use). The only way you'll know what to improve is to watch your users.
Try to keep the interface as simple as possible. Most users will only need a text window and a search button. The remaining options can be put inside of an advanced search option.
This setup is friendlier for new users, as well as helping to conserve resources by saving the more expensive advanced searches for people who actually need them.
my thoughts:
-Only show advanced criteria when it is desired. Search is a great thing when it is made as simple as possible to the people trying to search.
-If there is some very large set of search criteria for advanced searches: do not clutter the results with it. Make it very easy and obvious for a user to go back and modify the criteria, but don't try to waste space on the results by giving them their criteria again right off the bat.
-Organization of criteria is hard to say without knowing it all. but as others have/will say: make it simple! You might not need to show it all at once: let me expand areas if i want more, hide stuff i don't want to use. and then put a search button at the bottom of it. But again, I won't want to scroll through a page of random criteria just to find this button.
There should be a search text box as a part of the mast head on every page of the site.
I prefer that the button be labeled "find" instead of "search" because benefits are always more compelling than features.
What should be sophisticated is your search algorithm and not the GUI.
Please find my answers(in normal text) against each of the questions(in italics) asked.
"1) Do you think the search panel should be visible all the time (ie displayed on top of my result grid) or available in a separate form (which would let me use more place for all the controls)"
Display on top of result grid as this leaves extra horizontal space to display search results and thereby to display more columns of search data without scrolling horizontally.
"2) Do you think it's better to display all the search criteria, or to let the user click on 'advanced' if he wants to see/use more criteria"
Display all available criteria but in a tabbed fashion. i.e. categorize input search fields into categories and have a tab for each category.
"3) How would you organize the criteria? by usage frequency, or rather by area (ie. criteria related to user, to location, to time, etc.)"
Organize 'by area' because different people like using different criteria.
Each criteria would have tab of it's own. But organize the tabs in the order of 'more popular' to 'less popular' as you think. In your case tabs may be 'By Name'(containing fields first name, middle name, last name, mother maiden name, nick name, father's name etc), 'By Location' (place name, county name, district name, state name, country name etc)
and so on until the advanced tab(where you'd put least used fields).
"4) Where should I put the 'Search' button? next to the more common search controls, or at the bottom, or both?"
Put the input fields of search as discussed above in a tabbed fashion categorizing them based on 'type of field'(I'll refer to this area as search grid). Then put action buttons such as 'Search', 'Clear/Reset' just below the search grid aligning to the center(I'll refer to this area as button grid).Then put the search result pane below the button grid as more horizontal area is available for display so that maximum columns can be displayed at once.
Take a look at quince, the infragistics ui patterns site: http://quince.infragistics.com.
Personally, I'd look at using a filterable grid, like the xtragrid from DevExpress: http://www.devexpress.com/Products/NET/Controls/WinForms/Grid/datafiltering.xml
coupled with a search bar above it to initially populate the grid.
Don't think this has been mentioned yet but dont forget that you will also need to initiate the search when the user presses enter in any of the search fields. Probably aware of this already, but worth mentioning anyway.