I have created a dot file.which contain some korean language in some node's label .i created png file with help of graphvig tool but that created png doesn't support korean language it appear as square box. if i create svg file then it works fine.
help me how to resolve this.
Also try running dot -v to see what plugins and font files are being loaded. Generally we expect UTF-8 to work (a lot of work was done on this over the years), and text layout through the cairopango driver works well. A downside is that pango now does its own font lookup which is somewhat of a black box to other code. (pango recently dropped fontconfig, which is understandable. We did not ever discover a way to determine if fontconfig failed to find a good match for a given specification - it would cheerfully return e.g. a typewriter font when it could not find any other match.) Hope this helps a little.
Stephen North (for the graphviz project)
I had the same problem, when a .png file is generated, the non-ascii chars is not rendered correctly.
My alternative solution is to use the .svg output (via some command like: dot -Tsvg my_graph.gv), which left the font-finding problem to the svg viewer.
You can open the .svg file with a Web Browser. And most Web Browser also support the save as function to convert the .svg file to .png if you insist on the .png format.
Hope this helpful
I met the same problem, and adding the following lines helped me:
strict digraph {
node [ fontname="Adobe Kaiti Std" ];
edge [ fontname="Adobe Heiti Std" ];
}
Use a tool to convert the SVG file into a PNG. I suggest Batik. You'll have to deal with installing fonts, of course. Alternatively, you can use Inkscape, though that's slightly more of a manual process.
Make sure to define a korean fontname in your graph.
Related
Is there an option for to me to ask Ghostscript to indent the Postscript it creates?
Everything starts at the beginning of a line and I find it difficult to follow.
Alternatively, I am using Emacs and ps-mode.
If anyone know how to indent code in this mode I would appreciate a tip (apologize because this may not be relevant to this StackExchange)
No, there is no option for indenting the output.
PostScript is pretty much regarded as a write-only language anyway, and the output of ps2write (which is what I assume you are using though you don't say) is particularly difficult since it fundamentally outputs PDF syntax with a PostScript program on the front to parse it into PostScript operations.
Why do you want to read it ?
[EDIT]
You can always edit your question, you don't need to post a new answer.
I'm afraid what you want to do isn't as simple as you might think.
It might be possible for this use case if the PDF files you receive are always created the same way, but there are significant problems.
The font you use as a substitute for the missing font must be encoded the same way. Say for example the font in the PDF file is encoded so that 0x41 is 'A', you need to make sure that the replacement font is also encoded so that 0x41 is an 'A'. So just the findfont, scalefont, setfont sequence is not always going to be sufficient, sometimes you will need to re-encode the font.
CIDFonts will be a major stumbling block. Firstly because ps2write simply doesn't emit CIDFonts at all. These were not part of level 2 PostScript. As a result all text in a CIDFont will be embedded as bitmaps. If your original file doesn't contain the CIDFont then you'll get the fallback CIDFont bitmapped.
Secondly CIDFonts can use multiple-byte character codes, of variable length. You can't simply replace a CIDFont with a Font, it just won't work.
The best solution, obviously, is to have the PDF files created with the fonts required embedded. This is best practice. If you can't get that, then I'd suggest that rather than trying to hand edit PostScript, you use the fontmap.GS and cidfmap files which Ghostscript uses to find font.
Ghostscript already has a load of code to do font substitution automatically, using both Fonts and CIDFonts as substitutes, and it does all the hard work of re-encoding the fonts or building CMaps as required. If you are on Windows much of this may already be done for you, when you install Ghostscript it will ask if you want to create font mappings. If you said yes then it will
Add the font substitutions you want to use in those files (they have comments explaining the layout) and then use the pdfwrite device to make a new PDF file. Set EmbedAllFonts to true (you may need to add a AlwayEmbed font array as well, listing the fonts specifically) and SubsetFonts to false.
That should create a new PDF file where the missing fonts have been replaced by your defined substitutes, those substitutes will have been embedded in the new PDF file and they have will not been subset (Acrobat will generally refuse to edit text in a subset font).
The switches I mentioned above are standard Adobe Distiller parameters, but they are documented for pdfwrite here. There's some documentation on adding fonts here and here and specifically for CIDFonts here.
Basically I'd suggest you define your substitutions and let Ghostscript do the work for you.
This is not an answer to the problem but rather an answer to KenS's question about "Why do you want to read it?"
I tried to put it in the comment box but it was too long.
I am a retired engineer with a strong programming background.
I would like to read and understand the postscript code for the reason shown below.
I play duplicate bridge as a hobby. I recieve a PDF file of what is know as a convention card (a single page document of bridge agreements).
Frequently I would like to edit these files.
When I open with Adobe Illustrator I have to spend a significant amount of time replacing fonts that are not on my system with fonts that I do have.
I can take the PDF and export it as a postscript file using Ghostscript.
I was going to write a little program to replace the embedded fonts with the fonts that I use to replace them.
I was going to leave the postscript file unaltered and insert things like
/HelveticaMonospacedPro-RG findfont
12 scalefont setfont
just above where the text is written.
I was planning on using the fonts that I have on my system (e.g., HelveticaMonospacedPro-RG).
Matlab cannot display Arabic/Persian labels of the figure. Also I cannot see my installed fonts and I don't want to add the labels by another program. How can I fix this problem?
What you're looking for is a way to display unicode characters in axes labels.
It seems that this problem was encountered before, but there's no simple solution for it. See workarounds here and here.
One important thing though - do not edit .m files containing unicode\utf-8 characters (such as Arabic, Farsi, Hebrew, Chinese, etc...) in MATLAB, because it messes up the characters upon saving. Use an external editor (like Notepad++) to edit and save the files (as UTF-8 without BOM), and only run in MATLAB.
I need to maintain some slides in both latex beamer and in powerpoint. (This is to make slides available for instructors elsewhere, too, 90% of which do not know how to use latex and are unwilling to learn it. and I am a latex guy on linux.)
I have tried the route via Libreoffice (and opendocument), but this did not come out well. right now, the best method that I have found is to author pdf in beamer, then run it through a nuance OCR program to get MS Word...and not even go all the way to Powerpoint (which is where I really need to be).
If I only had a markup language that produced nice Powerpoint, I could probably code a perl translator from markdown to this intermediate markup language. (going from markdown to latex beamer is relatively easy.)
I don't think this exists, but hope springs eternal. after all, it is almost 2014 now. does anyone know of a solution?
One solution is to use odpdown: It converts markdown to the OpenOffice Presenter format, which can be imported into PowerPoint.
It is not yet complete, i.e. table support is missing and possibly not running on certain Windows setups, but nevertheless it could be a start. Possibly, you have Linux running, where it seems to work.
Steve Rindsberg's answer in the comments works on PP 2007 works! Let me repeat it here:
I suspect that PowerPoint is the likeliest solution. ;-) But what sort
of slides are you creating? If they're simple heading and bullet point
slides, all you need to produce is a simple text file. Any text that
starts in the left column will be the heading of a new slide. Indent
one tab and it becomes a first-level bullet point under the current
heading; indent two tabs, it becomes a second level bullet point and
so on. Simply use File | Open on the text file to pull it into PPT.
Steve: Is this all that PP converts? Or is there a reference of other "sneaky" markup that PP knows about?
(pandoc: unfortunately, the conversion from libreoffice to powerpoint is pretty poor when I tried it last. I also tried to save and understand the powerpoint xml format, but that was REAL bad.)
The easiest way to handle this is to work with:
RStudio (and R if not already installed)
RMarkdown
Pandoc 2.0.5 (minimum)
Install those 3 (or 4) items, then read: https://bookdown.org/yihui/rmarkdown/powerpoint-presentation.html
The installation time is worth the time saved copy-pasting everything from scratch.
I also am a Linux guy and I also use LateX engines to create nice documents. Based on my experience, here's what you should do :
Stop writing directly in LaTeX and start using org-mode to write documents instead (I spent years writing in LaTeX and now it's over (except when I use modernv package))
Org supports latex math formulas and .org files are easily exported in .tex files
Org can also be easily exported in markdown
Once you have your markdown, there are several tools that will allow you to create a PowerPoint. Two of them are pandoc and md2pptx
I currently have a script that produces a large amount of 3.5-inch-square SVG images. What I need is to be able to put these SVGs in a layout which can be easily and accurately printed.
I have tried using an HTML template, but HTML/CSS does not have sufficiently robust printing support.
What document layout language is most appropriate for handling SVG images, and how could this be implemented in a scripting language?
I use Ruby to generate my SVGs, and although preferable, it is not required that Ruby also be the language used to generate the print layout.
I'd suggest compiling all SVGs to a larger SVG, placing everything where you want it, and convert that to PDF using one of multiple options:
Using Inkscape on the command line, like
inkscape -f in.svg -A out.pdf
Using Batik
java -jar batik-rasterizer.jar -m application/pdf -d out.pdf in.svg
Using librsvg, like
rsvg-convert -f pdf -o out.pdf in.svg
(Probably the most lightweight option)
You might also be able to use the rsvg2 Ruby gem with a Cairo PDF surface. Documentation seems scarce or scattered, though.
If you have a budget, Prince is what you want. Since you've already tried to use CSS+HTML to get it working, you may have a working solution almost ready. Just generate the HTML, SVG, and CSS (use the CSS3 paged media extensions for best control), then pass it off to Prince to generate the PDF. I've used this for several projects, and it works great.
There are free options that work like Prince, notably wkhtmltopdf, but they might not respect your paging options as much as Prince.
Otherwise, you might be able to hack something together using Cairo, by creating a page-sized SVG image and laying it out, adding links to the multiple external SVG files.
Either of these options will end up generating a PDF, which is the only way to ensure that it will print the same no matter which browser or OS is being used.
Does anybody know program or library that can read the photoshop gradient .grd files or the file format because currently I need to export the gradient in Photoshop to another format like svg gradient.
A document describing the Photoshop Gradients File Format has been mentioned in this PS-Scripts forum:
http://www.ps-scripts.com/bb/viewtopic.php?f=2&t=4925
HTH...
The cptutils package can convert grd to svg (and many other formats). I you just want to convert a couple of files the possibly the online version will meet your needs.
You might try using Gimp; for which this article suggest a free add-on under "Conversion options" (which I have not tried).
http://gitorious.org/re-lab/graphics/trees/master/photoshop/grd is what you are looking for