I'm making a site using Sinatra, everything is going well, or was until I needed to access the params[] hash in the before block.
Basically, I'm trying to do this:
before do
if params[:forum_id]
#forum = Forum.find(params[:forum_id])
build_breadcrumbs(#forum.parents)
# ... more code, snipped to keep it short
end
end
But the thing is, I can't call the params[] hash in the before block, does anyone have any ideas?
The reason I'm putting this code in the before block is because I'd rather not have to go and put it in every one of my get and post blocks for every page.
From the docs:
Before filters are evaluated before each request within the same
context as the routes will be and can modify the request and response.
Since this happens before the actual request, you can't access the request parameters. What you can do is put the repetitive code into a method and call that in your route blocks.
This is not true anymore. I just tested it. You can now access params in before {...}
Related
I am currently developing a Ruby API based on Sinatra. This API mostly receives GET requests from an existing social platform which supports external API integration.
The social platform fires off GET requests in the following format (only relevant parameters shown):
GET /{command}
Parameters: command and text
Where text is a string that the user has entered.
In my case, params[:text] is in fact a series of commands, delimited by a space. What I want to achieve is, for example: If params[:text]="corporate finance"
Then I want my API to interpret the request as a GET request to
/{command}/corporate/finance
instead of requesting /{command} with a string as a parameter containing the rest of the request.
Can this be achieved on my side? Nothing can be changed in terms of the initial request from the social platform.
EDIT: I think a better way of explaining what I am trying to achieve is the following:
GET /list?text=corporate finance
Should hit the same endpoint/route as
GET /list/corporate/finance
This must not affect the initial GET request from the social platform as it expects a response containing text to display to the user. Is there a neat, best practice way of doing this?
get "/" do {
text = params[:text].split.join "/"
redirect "#{params[:command]}/#{text}"
end
might do the trick. Didn't check though.
EDIT: ok, the before filter was stupid. Basically you could also route to "/" and then redirect. Or, even better:
get "/:command" do {
text = params[:text].split.join "/"
redirect "#{params[:command]}/#{text}"
}
There a many possible ways of achieving this. You should check the routes section of the sinatra docs (https://github.com/sinatra/sinatra)
The answer by three should do the trick, and to get around the fact that the filter will be invoked with every request, a conditional like this should do:
before do
if params[:text]
sub_commands = params[:text].split.join "/"
redirect "#{params[:command]}/#{sub_commands}"
end
end
I have tested it in a demo application and it seems to work fine.
The solution was to use the call! method.
I used a regular expression to intercept calls which match /something with no further parameters (i.e. /something/something else). I think this step can be done more elegantly.
From there, I split up my commands:
get %r{^\/\w+$} do
params[:text] ? sub_commands="/"+params[:text].split.join("/") : sub_commands=""
status, headers, body = call! env.merge("PATH_INFO" => "/#{params[:command]}#{sub_commands}")
[status, headers, body]
end
This achieves exactly what I needed, as it activates the correct endpoint, as if the URL was typed it the usual format i.e. /command/subcommand1/subcommand2 etc.
Sorry, I completely misunderstood your question, so I replace my answer with this:
require 'sinatra'
get '/list/?*' do
"yep"
end
like this, the following routes all lead to the same
You need to add a routine for each command or replace the command with a * and depend your output based on a case when.
The params entered by the user can be referred by the params hash.
http://localhost:4567/list
http://localhost:4567/list/corporate/finance
http://localhost:4567/list?text=corporate/finance
I'm using WebMock to stub out HTTP requests. I have this one particular call where, instead of creating dummy data to pass through, I want to be able to capture the actual parameters I would pass into my send() method. Therefore, I need access to those actual parameters in my spec and I imagine I would need to somehow capture that context.
So, for example, in my application I'm calling this method:
send(method, uri, :body => data_file)
And in my spec file I'm stubbing the method:
FoobarModule.should_receive(:send).with(args)
Is there any way I could -- in WebMock, Rspec -- get the context of when send() is being called in the application and grab those parameters I'm passing through to use them within the spec and replace them with args?
I've looked through the documentation and I don't see much of anything on this. If there's anyone aware of this, I would greatly appreciate your help. Thanks.
Using WebMock you could use request callbacks to capture request data:
WebMock.allow_net_connect!
WebMock.after_request do |request_signature, response|
puts request_signature
end
This question already has answers here:
Rails params explained?
(5 answers)
Closed 9 years ago.
I'm trying to understand how to make a variable available to a block that is not passed to the block as a parameter.
For example, how does Sinatra make params hash available?
get '/hello/:name' do
howAmIAccessingThis = params[:name]
end
Where is params coming from? This:
get '/hello/:name' do |params|
#hisName = params[:name]
end
might make sense because params is declared as a block argument, but that's not how it works. Looking through the source I cannot find how the params hash is getting passed to the block without it being a block parameter.
If it is not a local variable or a block variable, then it is a method. I don't know about Sinatra, but there must be a method params defined somewhere.
Using Parameters
Parameters in Sinatra are like everything else--simple and straightforward.
#!/usr/bin/env ruby
require 'rubygems'
require 'sinatra'
get '/hello/:name' do
"Hello #{params[:name]}!"
end
Once you've made this change, you'll need to restart the Sinatra application. Kill it with Ctrl-C and run it again. (There's a way around this, but we'll look at that in a future article.) Now, the parameters are straightforward. We've made an action called /hello/:name. This syntax is imitating what the URLs will look like, so go to http://localhost:4567/hello/Your Name to see it in action.
The /hello portion matches that portion of the URL from the request you made, and :name will absorb any other text you give it and put it in the params hash under the key :name. Parameters are just that easy. There is of course much more you can do with these, including regexp-based parameters, but this is all you'll need in almost every case.
Reference: http://ruby.about.com/od/sinatra/a/sinatra2.htm
EDIT
params values can come from the query string of a GET request, or the form data of a POST request, but there's also a third place they can come from: The path of the URL.
As you might know, Rails uses something called routes to direct requests to their corresponding controller actions. These routes may contain segments that are extracted from the URL and put into params. For example, if you have a route like this:
match 'products/:id', ...
Then a request to a URL like http://example.com/products/42 will set params[:id] to 42
So, whenever an URL GET, POST or Path contains such pattern then params hash is automatically constructed by rails.
Also check the Parameters section(Section 4) here
I'm trying to figure out whether or not a user likes our brand page. Based off of that, we want to show either a like button or some 'thank you' text.
I'm working with a sinatra application hosted on heroku.
I tried the code from this thread: Decoding Facebook's signed request in Ruby/Sinatra
However, it doesn't seem to grab the signed_request and I can't figure out why.
I have the following methods:
get "/tab" do
#encoded_request = params[:signed_request]
#json_request = decode_data(#encoded_request)
#signed_request = Crack::JSON.parse(#json_request)
erb :index
end
# used by Canvas apps - redirect the POST to be a regular GET
post "/tab" do
#encoded_request = params[:signed_request]
#json_request = decode_data(#encoded_request)
#signed_request = Crack::JSON.parse(#json_request)
redirect '/tab'
end
I also have the helper messages from that thread, as they seem to make sense to me:
helpers do
def base64_url_decode(payload)
encoded_str = payload.gsub('-','+').gsub('_','/')
encoded_str += '=' while !(encoded_str.size % 4).zero?
Base64.decode64(encoded_str)
end
def decode_data(signed_request)
payload = signed_request.split('.')
data = base64_url_decode(payload)
end
end
However, when I just do
#encoded_request = params[:signed_request]
and read that out in my view with:
<%= #encoded_request %>
I get nothing at all.
Shouldn't this return at least something? My app seems to be crashing because well, there's nothing to be decoded.
I can't seem to find a lot of information about this around the internet so I'd be glad if someone could help me out.
Are there better ways to know whether or not a user likes our page? Or, is this the way to go and am I just overlooking something obvious?
Thanks!
The hint should be in your app crashing because there's nothing to decode.
I suspect the parameters get lost when redirecting. Think about it at the HTTP level:
The client posts to /tab with the signed_request in the params.
The app parses the signed_request and stores the result in instance variables.
The app redirects to /tab, i.e. sends a response with code 302 (or similar) and a Location header pointing to /tab. This completes the request/response cycle and the instance variables get discarded.
The client makes a new request: a GET to /tab. Because of the way redirects work, this will no longer have the params that were sent with the original POST.
The app tries to parse the signed_request param but crashes because no such param was sent.
The simplest solution would be to just render the template in response to the POST instead of redirecting.
If you really need to redirect, you need to carefully pass along the signed_request as query parameters in the redirect path. At least that's a solution I've used in the past. There may be simpler ways to solve this, or libraries that handle some of this for you.
Perhaps I'm just not writing idiomatic code for savon, so please feel free to straighten me out, but I was trying to make multiple requests on the same client, as demonstrated in
client=Savon::Client.new {
wsdl.document=wsdl_path
}
r1=client.request(:company_get_report_suites) do
wsse.credentials APP_CONFIG['omniture']['username'],APP_CONFIG['omniture']['shared_secret'],:digest
end
r2=client.request(:scheduling_get_reports_run_history) do
wsse.credentials APP_CONFIG['omniture']['username'],APP_CONFIG['omniture']['shared_secret'],:digest
end
The second request ends up reusing the nonce. The point of the wsse nonce is to use it only once, so the service I'm calling complains that I've reused it and refuses to service the request. My first thought was to add a timestamp, but that didn't help; in fact, the source code shows the nonce is used if set, and generated only if not previously set.
Obviously, if I must, I can create a new client, but that's a rather heavy-weight operation and seems unlikely to be the normal way to create multiple requests off of the same client.
Is there a sensible workaround?
This makes me feel dirty, but if no one can suggest a better alternative, this does the trick:
class Savon::WSSE
def reset_nonce
#nonce=nil
#nonce=nonce
end
end
r1=client.request(:company_get_report_suites) do
wsse.reset_nonce
end