I have only one ruby version installed:
$ rvm list
=* ruby-2.5.7 [ x86_64 ]
# => - current
# =* - current && default
# * - default
But any time I install jekyll or bundler I got complain of an older version.
$ sudo gem install bundler
ERROR: Error installing bundler:
bundler requires Ruby version >= 2.3.0.
Unable to find the reason.
Operating system: CentOS
When using RVM as your Ruby manager you do not (and should not) use sudo. Sudo runs everything under the root account. But RVM is installed under your own user account, and therefore sudo is not needed, and will in fact circumvent RVM if used.
So, just drop the sudo part, and if RVM is installed properly, everything should start working correctly:
gem install bundler # <- no sudo needed
I bit late, but I had the same problem and couldn't find an answer documented anywhere.
The problem is that sudo uses a different version of ruby than what rvm has set. You can see this by comparing ruby -v and sudo ruby -v.
To solve this, try rvmsudo gem install bundler. This causes sudo to use the version of ruby that rvm expects.
Read more here: https://rvm.io/integration/sudo
I am trying to install Jekyll in a VM for my web course and it required ruby >= 2.0.0.
I've gone through installing RVM and using this to install the desired version of ruby, but I then get the following:
vagrant#precise32:~/.rvm/bin$ bash rvm list
rvm rubies
ruby-2.1.1 [ i686 ]
=* ruby-2.2.1 [ i686 ]
# => - current
# =* - current && default
# * - default
vagrant#precise32:~/.rvm/bin$ ruby -v
ruby 1.8.7 (2011-06-30
patchlevel 352) [i686-linux]
vagrant#precise32:~/.rvm/bin$ sudo gem
install jekyll ERROR: Error installing jekyll:jekyll requires Ruby version >= 2.0.0.
vagrant#precise32:~/.rvm/bin
I don't understand why it still thinks it is using version 1.8.7, as it confirms that it has installed 2.2.1.
I have done the following:
Use sudo chown to change ownership of the .gnupg folder recursively to vagrant (my system user) as defined here.
Install RVM following the instructions here.
Installed the version (2.2.1) of ruby using these instructions (https://rvm.io/rubies/installing).
Tried to install Jekyll using sudo gem install jekyll, but I get an error saying that I need ruby version 2.0 or higher.
I'm not a developer, this is an introductory web development course. Also please excuse the corrupt link, I can't post more than 2.
Update: I think I might need to do something as described here: How do I change my Ruby version using RVM?.
Also - although I installed RVM, I originally installed it using sudo apt-get which corrupted it. I uninstalled that, and ran the most recent install with curl. To use it I have to navigate to the directory and use "bash rvm list"
Add following two lines:
export PATH="$PATH:$HOME/.rvm/bin" # Add RVM to PATH for scripting
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
to your $HOME/.profile file and restart a shell.
It seems your machine is using Its own instead by RVM.
1: rvm list # Listing install rubies will you get versions of ruby which is installed by RVM
2: rvm use < ruby-version > # for instances ruby-1.9.3-p125
3: bundle install
4: Tried to install Jekyll using sudo gem install jekyll, but I get an
error saying that I need ruby version 2.0 or higher.
For that you could try Installing Jekyll on Ubuntu 14.04
Hope this help you !!!
I'm trying to install a gem using gem install mygem or update RubyGems using gem update --system, and it fails with this error:
ERROR: While executing gem ... (Gem::FilePermissionError)
You don't have write permissions for the /Library/Ruby/Gems/2.0.0 directory.
Does anyone have an idea how to solve this?
Try adding --user-install instead of using sudo:
gem install mygem --user-install
You don't have write permissions into the /Library/Ruby/Gems/1.8 directory.
means exactly that, you don't have permission to write there.
That is the version of Ruby installed by Apple, for their own use. While it's OK to make minor modifications to that if you know what you're doing, because you are not sure about the permissions problem, I'd say it's not a good idea to continue along that track.
Instead, I'll strongly suggest you look into using either rbenv or RVM to manage a separate Ruby, installed into a sandbox in your home directory, that you can modify/fold/spindle/change without worrying about messing up the system Ruby.
Between the two, I use rbenv, though I used RVM a lot in the past. rbenv takes a more "hands-off" approach to managing your Ruby installation. RVM has a lot of features and is very powerful, but, as a result is more intrusive. In either case, READ the installation documentation for them a couple times before starting to install whichever you pick.
You really should be using a Ruby version manager.
Using one properly would prevent and can resolve your permission problem when executing a gem update command.
I recommend rbenv.
However, even when you use a Ruby version manager, you may still get that same error message.
If you do, and you are using rbenv, just verify that the ~/.rbenv/shims directory is before the path for the system Ruby.
$ echo $PATH will show you the order of your load path.
If you find that your shims directory comes after your system Ruby bin directory, then edit your ~/.bashrc file and put this as your last export PATH command: export PATH=$HOME/.rbenv/shims:$PATH
$ ruby -v shows you what version of Ruby you are using
This shows that I'm currently using the system version of Ruby (usually not good)
$ ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin12.0]
$ rbenv global 1.9.3-p448 switches me to a newer, pre-installed version (see references below).
This shows that I'm using a newer version of Ruby (that likely won't cause the Gem::FilePermissionError)
$ ruby -v
ruby 1.9.3p448 (2013-06-27 revision 41675) [x86_64-darwin12.4.0]
You typically should not need to preface a gem command with sudo. If you feel the need to do so, something is probably misconfigured.
For details about rbenv see the following:
https://github.com/sstephenson/rbenv
http://robots.thoughtbot.com/post/47273164981/using-rbenv-to-manage-rubies-and-gems
Why don't you do:
sudo gem update --system
This will fix the issue on MacOS Mojave and Catalina in a clean way:
brew install ruby
Then set GEM_HOME to your user directory. On the terminal:
Bash:
echo '# Install Ruby Gems to ~/gems' >> ~/.bashrc
echo 'export GEM_HOME=$HOME/gems' >> ~/.bashrc
echo 'export PATH=$HOME/gems/bin:$PATH' >> ~/.bashrc
source ~/.bashrc
OR if on Zsh:
echo '# Install Ruby Gems to ~/gems' >> ~/.zshrc
echo 'export GEM_HOME=$HOME/gems' >> ~/.zshrc
echo 'export PATH=$HOME/gems/bin:$PATH' >> ~/.zshrc
source ~/.zshrc
For me the problem was due to using rbenv and forgetting to set the proper version globally.
So I had to set it with rbenv global xxx
In my case I installed 2.0.0-p247 so I had to issue the command:
rbenv global 2.0.0-p247
rbenv rehash
Then all was working fine.
You need to correct your paths.
To determine if this fix will work, run the following:
which gem
This should output a directory you do not have permissions to:
/usr/bin/gem
To fix this perform the following steps:
Determine the path you need to copy to your profile:
rbenv init -
The first line of the output is the line you need to copy over to your profile:
export PATH="/Users/justin/.rbenv/shims:${PATH}" #path that needs to be copied
source "/usr/local/Cellar/rbenv/0.4.0/libexec/../completions/rbenv.zsh"
rbenv rehash 2>/dev/null
rbenv() {
typeset command
command="$1"
if [ "$#" -gt 0 ]; then
shift
fi
case "$command" in
rehash|shell)
eval `rbenv "sh-$command" "$#"`;;
*)
command rbenv "$command" "$#";;
esac
}
Copy the path to your profile and save it.
Reload your profile (source ~/.zshenv for me).
Run rbenv rehash.
Now when you run which gem you should get a local path that you have permissions to:
/Users/justin/.rbenv/shims/gem
This worked for me. Plus, if you installed gems as root before, it fixes that problem by changing ownership back to you (better security-wise).
sudo chown -R `whoami` /Library/Ruby/Gems
Try nathanwhy's answer before using my original answer below. His recommendation of --user-install should accomplish the same purpose without having to muck with your .bash_profile or determine your Ruby version.
If you are not concerned about a specific ruby version, you can skip the heavy-lift Ruby environment manager options, and just add these lines to ~/.bash_profile:
export GEM_HOME="$HOME/.gem/ruby/2.0.0"
export GEM_PATH="$HOME/.gem/ruby/2.0.0"
The path is stolen from the original output of gem env:
RubyGems Environment:
- RUBYGEMS VERSION: 2.0.14
- RUBY VERSION: 2.0.0
- INSTALLATION DIRECTORY: /Library/Ruby/Gems/2.0.0
- RUBY EXECUTABLE: /System/Library/.../2.0/usr/bin/ruby
- EXECUTABLE DIRECTORY: /usr/bin
- RUBYGEMS PLATFORMS:
- ruby
- universal-darwin-14
- GEM PATHS:
- /Library/Ruby/Gems/2.0.0
- /Users/mylogin/.gem/ruby/2.0.0 # <---- This line, right here. -----
- /System/Library/.../usr/lib/ruby/gems/2.0.0
...
No sudoing is required, and you can use the already-installed Ruby, courtesy of Apple.
sudo gem update --system
sudo gem install (gemfile)
There are two routes: Use either rbenv or RVM. There are recipes for both below. Before you do, you probably want to turn off the installation of local documents for gems.
echo "gem: --no-ri --no-rdoc" >> ~/.gemrc
Then:
install rbenv
install ruby-build
run:
rbenv install 2.1.2 (or whatever version you prefer)
rbenv global 2.1.2
gem update --system
This installs an up-to-date version of the gem system in your local directories. That means you don't interfere with the system configuration. If you're asking this question, you shouldn't be messing with system security, and you'll spend longer understanding what issues you may run into, than just having an easy way to avoid the problem you started with. Learn InfoSec later, when you know more about the operating system and programming.
For an alternative use 'RVM' instead: To install rvm run:
rvm install 2.1.2
rvm use 2.1.2
gem update --system
This has the same result, you end up with a local Ruby and Gem system that doesn't interfere with the system versions. There is no need for Homebrew, or over-riding system libs, etc.
I found this how-to for sudoless gem:
brew install rbenv ruby-build
sudo gem update --system
add exports to .bashrc:
export RBENV_ROOT="$(brew --prefix rbenv)"
export GEM_HOME="$(brew --prefix)/opt/gems"
export GEM_PATH="$(brew --prefix)/opt/gems"
And finally add this to your ~/.gemrc:
gem: -n/usr/local/bin
gem update --system
sudo chown -R $USER /Library/Ruby/Gems/
I needed to do a rbenv rehash so it would point to my local Gem library.
It looks like you've got your gem manager pointing to the System Library, so, instead of messing with permissions, do the equivalent of "rehash" for your manager to get things pointing locally.
I had formatted my Mac and many suggested solutions did not work for me.
What worked for me are these commands in the correct order:
Install Homebrew:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Install Ruby:
brew install ruby
Install Compass:
sudo gem install compass
Older and wiser
Don't do what I say here, just know to be wary any time you use sudo. You probably want to use something like rbenv to isolate whatever work you're doing.
a way
learn about chown
I don't know if you like the command line, but this will make working on any project with any tool that installs packages to your system a breeze.
chown as far as I can tell, stands for change ownership.
The reason I came looking for this answer is because gem install threw this error at me today:
ERROR: While executing gem ... (Gem::FilePermissionError)
You don't have write permissions into the /var/lib/gems/1.9.1 directory.
This is a perfect opportunity to use chown. You see Ruby has given us the directory it needs access to, and it seems like it's a directory it will use pretty often.
In this case, there are only three things one needs to know to solve the problem, but chown is much more powerful, and grants you a lot more flexibility than I will demonstrate now. Please refer to the source at the bottom for more information.
The Two Things
Username
Directory
If you're in a shell finding the username is easy. Just look at the prompt. Mine looks like:
breadly#breadly-desktop:~\Desktop
The current user is just the name before the #. We know the directory from the error messages, but you have two choices. You can either limit your permission to the current version by using ../gems/1.9.1, or give yourself write permission for gems of all version by using ../gems.
The command to actually change ownership would look like this.
chown -R $(whoami) /absolute/path/to/directory
The -R is known as a flag and the -R flag typically tells a command to do something recursively, or in other words perform the command on every thing that is contained in the directory, and all the things contained in the directories contained within, and so on till there isn't anything else.
Work for me:
sudo gem uninstall cocoapods
sudo gem install cocoapods
Install rbenv by brew install rbenv;
Then put eval "$(rbenv init -)" at the end of ~/.bash_profile (or ~/.zshrc
of MacOS);
Open a new terminal and run gem install *** will work!
Check to see if your Ruby version is right. If not, change it.
This works for me:
$ rbenv global 1.9.3-p547
$ gem update --system
A 2021 solution (using rvm):
If you type which ruby in terminal, and it shows /usr/bin/ruby, you can try this solution.
install rvm
curl -L https://get.rvm.io | bash -s stable
install ruby using rvm
rvm install "ruby-3.0.0"
use your installed version of ruby
rvm use ruby-3.0.0
type which ruby again, which will show /Users/mac_user_name/.rvm/rubies/ruby-3.0.0/bin/ruby.
It's a new path to use ruby.
Tested on MacOS Mojave WITH SUCCESS:
Uninstall all your old ruby versions (let's say you have 2.00 and 2.3.0):
$ rvm uninstall 2.0.0
$ rvm uninstall 2.3.0
Install brand new ruby version:
$ brew install ruby
Set a default alias to your version:
$ rvm alias create default ruby
Reboot your system because this is the safest way your computer loads the new ruby version, recently installed.
AFTER you done above procedure, you can successfully run any gem command.
As pointed out by bobbdelsol, rehash worked for me :
==> which ruby
/usr/bin/ruby
==> rbenv install 1.9.3-p551
Downloading ruby-1.9.3-p551.tar.bz2...
-> https://cache.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p551.tar.bz2
Installing ruby-1.9.3-p551...
Installed ruby-1.9.3-p551 to /Users/username/.rbenv/versions/1.9.3-p551
==> which ruby
/Users/username/.rbenv/shims/ruby
==> which gem
/Users/username/.rbenv/shims/gem
==> gem install compass
ERROR: While executing gem ... (Gem::FilePermissionError)
You don't have write permissions for the /Library/Ruby/Gems/2.0.0 directory.
==> ruby -v
ruby 2.0.0p648 (2015-12-16 revision 53162) [universal.x86_64-darwin15]
==> rbenv global 1.9.3-p551
==> ruby -v
ruby 2.0.0p648 (2015-12-16 revision 53162) [universal.x86_64-darwin15]
==> rbenv global 1.9.3-p551
==> rbenv rehash
==> ruby -v
ruby 1.9.3p551 (2014-11-13 revision 48407) [x86_64-darwin15.4.0]
==> gem install compass
Fetching: sass-3.4.22.gem (100%)
Fetching: multi_json-1.11.3.gem (100%)
Fetching: compass-core-1.0.3.gem (100%)
Fetching: compass-import-once-1.0.5.gem (100%)
Fetching: chunky_png-1.3.5.gem (100%)
Fetching: rb-fsevent-0.9.7.gem (100%)
Fetching: ffi-1.9.10.gem (100%)
Building native extensions. This could take a while...
Fetching: rb-inotify-0.9.7.gem (100%)
Fetching: compass-1.0.3.gem (100%)
Compass is charityware. If you love it, please donate on our behalf at http://umdf.org/compass Thanks!
Successfully installed sass-3.4.22
Successfully installed multi_json-1.11.3
Successfully installed compass-core-1.0.3
Successfully installed compass-import-once-1.0.5
Successfully installed chunky_png-1.3.5
Successfully installed rb-fsevent-0.9.7
Successfully installed ffi-1.9.10
Successfully installed rb-inotify-0.9.7
Successfully installed compass-1.0.3
9 gems installed
Installing ri documentation for sass-3.4.22...
Installing ri documentation for multi_json-1.11.3...
Installing ri documentation for compass-core-1.0.3...
Installing ri documentation for compass-import-once-1.0.5...
Installing ri documentation for chunky_png-1.3.5...
Installing ri documentation for rb-fsevent-0.9.7...
Installing ri documentation for ffi-1.9.10...
Installing ri documentation for rb-inotify-0.9.7...
Installing ri documentation for compass-1.0.3...
Installing RDoc documentation for sass-3.4.22...
Installing RDoc documentation for multi_json-1.11.3...
Installing RDoc documentation for compass-core-1.0.3...
Installing RDoc documentation for compass-import-once-1.0.5...
Installing RDoc documentation for chunky_png-1.3.5...
Installing RDoc documentation for rb-fsevent-0.9.7...
Installing RDoc documentation for ffi-1.9.10...
Installing RDoc documentation for rb-inotify-0.9.7...
Installing RDoc documentation for compass-1.0.3...
You can change GEM_HOME. You have also under your home directory a gem folder to check it use
$ gem env
result is as follows. Unrelated parts are omitted.
...
- GEM PATHS:
- /Users/xxx/.gem/ruby/2.6.0
- /Library/Ruby/Gems/2.6.0
- /System/Library/Frameworks/Ruby.framework/Versions/2.6/usr/lib/ruby/gems/2.6.0
...
You can use your /Users/xxx/.gem/ruby/2.6.0 folder.
vim ~/.bash_profile
add the following line
export GEM_HOME=~/.gem/ruby/2.6.0/
After that you can use
source ~/.bash_profile
The issue for me was that I switched from zshell to bash earlier and was not logged in:
/bin/bash --login
Although I had rvm installed, it was not able to switch to my newly rvm-installed ruby version and was still trying to use the default Mac-installed ruby binary. Hence my confusion (user error!!!) and the continued permissions issues...
Steps to resolve issue:
Step 1: check and install cocoapods with home brew
brew install cocoapods
Step 2: This is most important, to resolve all the issues, installing
rvm package with stable ruby version, without this you will be
accessing ruby version inside System folder where you don't have
permission.
\curl -sSL https://get.rvm.io | bash -s stable --ruby
Step 3: Add rvm command path to .zshrc file to access it globally
export PATH="$PATH:$HOME/.rvm/scripts/rvm"
Step 4: check if rvm is running properly inside command line globally
rvm --version
Step 5: Now you can install cocoapods package inside user bin as this will
access ruby file from rvm folder, without any permission needed.
sudo gem install -n /usr/local/bin cocoapods
Step 6: Now you can check pod also by using below command
pod install
ERROR: While executing gem ... (Gem::FilePermissionError)
You don't have write permissions for the /Library/Ruby/Gems/2.6.0
[2022 Solution]
The detailed reason for the issues has been added here
Summary of the issue -> The issue was related to ruby access, M1 MAC comes with its own ruby. We don't have permission to use that for our purpose. Instead, we install a separate instance of ruby and use it for our purpose.
The below steps helped me resolve the problem, hope this might help some
We don't need to install ruby with rvn or chruby.
My solution uses homebrew to install ruby.
Open the terminal
Install ruby using homebrew
[for fresh install] brew install ruby
[for reinstalling] brew reinstall ruby
Check the path of ruby using the below command
which ruby
It should be installed in the below path
/usr/bin/ruby
To change the ruby path to the user path
To check which shell is used by your system
echo $0
-zsh
For zshrc
echo 'export PATH="/usr/local/opt/ruby/bin:$PATH"' >>~/.zshrc
For bash
echo 'export PATH="/usr/local/opt/ruby/bin:$PATH"' >>~/~/.bashrc
Quit and relaunch the terminal
After changing the path with step 5
Check for the path of the ruby again (execute step 3 - please make sure the path displays as given below)
/usr/local/opt/ruby/bin/ruby
[if you don't quit and launch the terminal, step 4 path will be shown]
This step may not be applicable to everyone can skip step 10 & 11, if you have the correct Cocoapods version installed
Check the version of the pod installed
pod --version
Uninstall the specific version of Cocoapods using the below command
In case the version installed is 1.11.0
gem uninstall cocoapods -v 1.11.0
Install the Cocoapods of the specific version
gem install cocoapods -v 1.11.0
Change the path to the Project directory cd {path of the project directory}
Install the bundler in the project directory
bundle install
Execute pod install
pod install
cd /Library/Ruby/Gems/2.0.0
open .
right click get info
click lock
place password
make everything read and write.
Installing gem or updating RubyGems fails with permissions error Then Type This Command
sudo gem install cocoapods
You can use: gem install cocoapods --pre --user
give the user $whoami to create somethin in those folder
sudo chown -R user /Library/Ruby/Gems/2.0.0
I've run into a lot of issues whilst attempting to install RVM on Ubuntu 9.10. Here's the steps I've tried doing:
install ruby (via ruby site, no package manager)
download rvm
install rvm (make edit to .bashrc)
use rvm to install ruby version & gems
Is there any crucial step that I seem to be missing?
Be sure to have selected an installed ruby (the --default portion tells rvm you want this ruby to be your default ruby version). Something like:
rvm --default use 1.9.2
Also this command will tell you which ruby is currently selected:
rvm list
And hopefully you'll see something like:
rvm rubies
ruby-1.9.2-p0 [ x86_64 ]
=> ruby-1.8.7-p302 [ x86_64 ]
At this point, you'll be able to install gems and hopefully have a successful rvm install and working environment.
I've had issues in the past where I didn't have an rvm ruby selected and was still working with my distribution's ruby and gems and got mixed up easily. Make sure you're ruby and gem commands are working out of your ~/.rvm folder whith the following commands:
which ruby
which gem
Good luck!
What are the issues you're running into? Sometimes I forget to switch into the correct rvm environment (e.g. rvm ree), so it helps to place a .rvmrc file in project directories.
I would start off by removing ubuntu's ruby installation so that you don't have to worry about conflicts (although rvm will setup your PATH correctly). Following the instructions at RVM, run the following command to install rvm,
bash < <( curl http://rvm.beginrescueend.com/releases/rvm-install-head )
and then install system dependencies as listed in rvm notes. and then install the specific ruby version you want (e.g. rvm install ree or rvm install 1.9.1)
Important : for a good installation try this :
type rvm | head -n1
Must return : rvm is a function
else add this line
[[ -s "/usr/local/rvm/scripts/rvm" ]] && . "/usr/local/rvm/scripts/rvm"
in your profile.
I installed fxruby using
$sudo port install rb-fxruby
As suggested in the book.
It works, my hello world program worked correctly.
Now, though, other code that I have written is broken, whenever I try to use any code that relies on a gem, it does not work. When I do
$ruby -e "require 'rubygems'"
in my code, it gives
"LoadError: no such file to load — rubygems"
When I set my RUBYOPT="rubygems" in my .bash_profile
$ruby -e "puts 'hello world'"
ruby: no such file to load -- ubygems (LoadError)
(it says 'ubygems' without the 'r' on the front, not sure why)
http://newsgroups.derkeiler.com/Archive/Comp/comp.lang.ruby/2008-08/msg00351.html suggests I check my gem location against my ruby location, I get:
$cat `which gem` | head -n 1
#!/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby
$ls -l `which ruby`
-rwxr-xr-x 2 root admin 12680 Feb 7 03:40 /opt/local/bin/ruby
I assume this means that the gems are confused, but not sure how to remedy it. Any ideas? It sucks not having gems.
---UPDATE---
Forgot to list versions:
$which gem
/usr/bin/gem
$gem --version
1.3.5
$ruby --version
ruby 1.8.7 (2009-04-08 patchlevel 160) [i686-darwin9]
If you installed rb-fxruby via macport it will install the macport ruby as well.
$ port info rb-fxruby
...
Library Dependencies: ruby, fox, fxscintilla
...
But as you can see rb-rubygems (the macport version of rubygems) is not listed as a dependency, so you will have to install it manually.
$ sudo port install rb-rubygems
should do it for you.
It looks like you are trying to use the Apple-supplied gem that works with the Apple-supplied ruby. Did you install the MacPorts version?
sudo port install rb-rubygems
/opt/local/bin/gem