I have an interesting math/CS problem. I need to sample from a possibly infinite random sequence of increasing values, X, with X(i) > X(i-1), with some distribution between them. You could think of this as the sum of a different sequence D of uniform random numbers in [0,d). This is easy to do if you start from the first one and go from there; you just add a random amount to the sum each time. But the catch is, I want to be able to get any element of the sequence in faster than O(n) time, ideally O(1), without storing the whole list. To be concrete, let's say I pick d=1, so one possibility for D (given a particular seed) and its associated X is:
D={.1, .5, .2, .9, .3, .3, .6 ...} // standard random sequence, elements in [0,1)
X={.1, .6, .8, 1.7, 2.0, 2.3, 2.9, ...} // increasing random values; partial sum of D
(I don't really care about D, I'm just showing one conceptual way to construct X, my sequence of interest.) Now I want to be able to compute the value of X[1] or X[1000] or X[1000000] equally fast, without storing all the values of X or D. Can anyone point me to some clever algorithm or a way to think about this?
(Yes, what I'm looking for is random access into a random sequence -- with two different meanings of random. Makes it hard to google for!)
Since D is pseudorandom, there’s a space-time tradeoff possible:
O(sqrt(n))-time retrievals using O(sqrt(n)) storage locations (or,
in general, O(n**alpha)-time retrievals using O(n**(1-alpha))
storage locations). Assume zero-based indexing and that
X[n] = D[0] + D[1] + ... + D[n-1]. Compute and store
Y[s] = X[s**2]
for all s**2 <= n in the range of interest. To look up X[n], let
s = floor(sqrt(n)) and return
Y[s] + D[s**2] + D[s**2+1] + ... + D[n-1].
EDIT: here's the start of an approach based on the following idea.
Let Dist(1) be the uniform distribution on [0, d) and let Dist(k) for k > 1 be the distribution of the sum of k independent samples from Dist(1). We need fast, deterministic methods to (i) pseudorandomly sample Dist(2**p) and (ii) given that X and Y are distributed as Dist(2**p), pseudorandomly sample X conditioned on the outcome of X + Y.
Now imagine that the D array constitutes the leaves of a complete binary tree of size 2**q. The values at interior nodes are the sums of the values at their two children. The naive way is to fill the D array directly, but then it takes a long time to compute the root entry. The way I'm proposing is to sample the root from Dist(2**q). Then, sample one child according to Dist(2**(q-1)) given the root's value. This determines the value of the other, since the sum is fixed. Work recursively down the tree. In this way, we look up tree values in time O(q).
Here's an implementation for Gaussian D. I'm not sure it's working properly.
import hashlib, math
def random_oracle(seed):
h = hashlib.sha512()
h.update(str(seed).encode())
x = 0.0
for b in h.digest():
x = ((x + b) / 256.0)
return x
def sample_gaussian(variance, seed):
u0 = random_oracle((2 * seed))
u1 = random_oracle(((2 * seed) + 1))
return (math.sqrt((((- 2.0) * variance) * math.log((1.0 - u0)))) * math.cos(((2.0 * math.pi) * u1)))
def sample_children(sum_outcome, sum_variance, seed):
difference_outcome = sample_gaussian(sum_variance, seed)
return (((sum_outcome + difference_outcome) / 2.0), ((sum_outcome - difference_outcome) / 2.0))
def sample_X(height, i):
assert (0 <= i <= (2 ** height))
total = 0.0
z = sample_gaussian((2 ** height), 0)
seed = 1
for j in range(height, 0, (- 1)):
(x, y) = sample_children(z, (2 ** j), seed)
assert (abs(((x + y) - z)) <= 1e-09)
seed *= 2
if (i >= (2 ** (j - 1))):
i -= (2 ** (j - 1))
total += x
z = y
seed += 1
else:
z = x
return total
def test(height):
X = [sample_X(height, i) for i in range(((2 ** height) + 1))]
D = [(X[(i + 1)] - X[i]) for i in range((2 ** height))]
mean = (sum(D) / len(D))
variance = (sum((((d - mean) ** 2) for d in D)) / (len(D) - 1))
print(mean, math.sqrt(variance))
D.sort()
with open('data', 'w') as f:
for d in D:
print(d, file=f)
if (__name__ == '__main__'):
test(10)
If you do not record the values in X, and if you do not remember the values in X you have previously generate, there is no way to guarantee that the elements in X you generate (on the fly) will be in increasing order. It furthermore seems like there is no way to avoid O(n) time worst-case per query, if you don't know how to quickly generate the CDF for the sum of the first m random variables in D for any choice of m.
If you want the ith value X(i) from a particular realization, I can't see how you could do this without generating the sequence up to i. Perhaps somebody else can come up with something clever.
Would you be willing to accept a value which is plausible in the sense that it has the same distribution as the X(i)'s you would observe across multiple realizations of the X process? If so, it should be pretty easy. X(i) will be asymptotically normally distributed with mean i/2 (since it's the sum of the Dk's for k=1,...,i, the D's are Uniform(0,1), and the expected value of a D is 1/2) and variance i/12 (since the variance of a D is 1/12 and the variance of a sum of independent random variables is the sum of their variances).
Because of the asymptotic aspect, I'd pick some threshold value for i to switch over from direct summing to using the normal. For example, if you use i = 12 as your threshold you would use actual summing of uniforms for values of i from 1 to 11, and generate a Normal(i/2, sqrt(i/12)) value for i >. That's an O(1) algorithm since the total work is bounded by your threshold, and the results produced will be distributionally representative of what you would see if you actually went through the summing.
I have been given an assignment in which I am supposed to write an algorithm which performs polynomial interpolation by the barycentric formula. The formulas states that:
p(x) = (SIGMA_(j=0 to n) w(j)*f(j)/(x - x(j)))/(SIGMA_(j=0 to n) w(j)/(x - x(j)))
I have written an algorithm which works just fine, and I get the polynomial output I desire. However, this requires the use of some quite long loops, and for a large grid number, lots of nastly loop operations will have to be done. Thus, I would appreciate it greatly if anyone has any hints as to how I may improve this, so that I will avoid all these loops.
In the algorithm, x and f stand for the given points we are supposed to interpolate. w stands for the barycentric weights, which have been calculated before running the algorithm. And grid is the linspace over which the interpolation should take place:
function p = barycentric_formula(x,f,w,grid)
%Assert x-vectors and f-vectors have same length.
if length(x) ~= length(f)
sprintf('Not equal amounts of x- and y-values. Function is terminated.')
return;
end
n = length(x);
m = length(grid);
p = zeros(1,m);
% Loops for finding polynomial values at grid points. All values are
% calculated by the barycentric formula.
for i = 1:m
var = 0;
sum1 = 0;
sum2 = 0;
for j = 1:n
if grid(i) == x(j)
p(i) = f(j);
var = 1;
else
sum1 = sum1 + (w(j)*f(j))/(grid(i) - x(j));
sum2 = sum2 + (w(j)/(grid(i) - x(j)));
end
end
if var == 0
p(i) = sum1/sum2;
end
end
This is a classical case for matlab 'vectorization'. I would say - just remove the loops. It is almost that simple. First, have a look at this code:
function p = bf2(x, f, w, grid)
m = length(grid);
p = zeros(1,m);
for i = 1:m
var = grid(i)==x;
if any(var)
p(i) = f(var);
else
sum1 = sum((w.*f)./(grid(i) - x));
sum2 = sum(w./(grid(i) - x));
p(i) = sum1/sum2;
end
end
end
I have removed the inner loop over j. All I did here was in fact removing the (j) indexing and changing the arithmetic operators from / to ./ and from * to .* - the same, but with a dot in front to signify that the operation is performed on element by element basis. This is called array operators in contrast to ordinary matrix operators. Also note that treating the special case where the grid points fall onto x is very similar to what you had in the original implementation, only using a vector var such that x(var)==grid(i).
Now, you can also remove the outermost loop. This is a bit more tricky and there are two major approaches how you can do that in MATLAB. I will do it the simpler way, which can be less efficient, but more clear to read - using repmat:
function p = bf3(x, f, w, grid)
% Find grid points that coincide with x.
% The below compares all grid values with all x values
% and returns a matrix of 0/1. 1 is in the (row,col)
% for which grid(row)==x(col)
var = bsxfun(#eq, grid', x);
% find the logical indexes of those x entries
varx = sum(var, 1)~=0;
% and of those grid entries
varp = sum(var, 2)~=0;
% Outer-most loop removal - use repmat to
% replicate the vectors into matrices.
% Thus, instead of having a loop over j
% you have matrices of values that would be
% referenced in the loop
ww = repmat(w, numel(grid), 1);
ff = repmat(f, numel(grid), 1);
xx = repmat(x, numel(grid), 1);
gg = repmat(grid', 1, numel(x));
% perform the calculations element-wise on the matrices
sum1 = sum((ww.*ff)./(gg - xx),2);
sum2 = sum(ww./(gg - xx),2);
p = sum1./sum2;
% fix the case where grid==x and return
p(varp) = f(varx);
end
The fully vectorized version can be implemented with bsxfun rather than repmat. This can potentially be a bit faster, since the matrices are not explicitly formed. However, the speed difference may not be large for small system sizes.
Also, the first solution with one loop is also not too bad performance-wise. I suggest you test those and see, what is better. Maybe it is not worth it to fully vectorize? The first code looks a bit more readable..
There is known Random(0,1) function, it is a uniformed random function, which means, it will give 0 or 1, with probability 50%. Implement Random(a, b) that only makes calls to Random(0,1)
What I though so far is, put the range a-b in a 0 based array, then I have index 0, 1, 2...b-a.
then call the RANDOM(0,1) b-a times, sum the results as generated idx. and return the element.
However since there is no answer in the book, I don't know if this way is correct or the best. How to prove that the probability of returning each element is exactly same and is 1/(b-a+1) ?
And what is the right/better way to do this?
If your RANDOM(0, 1) returns either 0 or 1, each with probability 0.5 then you can generate bits until you have enough to represent the number (b-a+1) in binary. This gives you a random number in a slightly too large range: you can test and repeat if it fails. Something like this (in Python).
def rand_pow2(bit_count):
"""Return a random number with the given number of bits."""
result = 0
for i in xrange(bit_count):
result = 2 * result + RANDOM(0, 1)
return result
def random_range(a, b):
"""Return a random integer in the closed interval [a, b]."""
bit_count = math.ceil(math.log2(b - a + 1))
while True:
r = rand_pow2(bit_count)
if a + r <= b:
return a + r
When you sum random numbers, the result is not longer evenly distributed - it looks like a Gaussian function. Look up "law of large numbers" or read any probability book / article. Just like flipping coins 100 times is highly highly unlikely to give 100 heads. It's likely to give close to 50 heads and 50 tails.
Your inclination to put the range from 0 to a-b first is correct. However, you cannot do it as you stated. This question asks exactly how to do that, and the answer utilizes unique factorization. Write m=a-b in base 2, keeping track of the largest needed exponent, say e. Then, find the biggest multiple of m that is smaller than 2^e, call it k. Finally, generate e numbers with RANDOM(0,1), take them as the base 2 expansion of some number x, if x < k*m, return x, otherwise try again. The program looks something like this (simple case when m<2^2):
int RANDOM(0,m) {
// find largest power of n needed to write m in base 2
int e=0;
while (m > 2^e) {
++e;
}
// find largest multiple of m less than 2^e
int k=1;
while (k*m < 2^2) {
++k
}
--k; // we went one too far
while (1) {
// generate a random number in base 2
int x = 0;
for (int i=0; i<e; ++i) {
x = x*2 + RANDOM(0,1);
}
// if x isn't too large, return it x modulo m
if (x < m*k)
return (x % m);
}
}
Now you can simply add a to the result to get uniformly distributed numbers between a and b.
Divide and conquer could help us in generating a random number in range [a,b] using random(0,1). The idea is
if a is equal to b, then random number is a
Find mid of the range [a,b]
Generate random(0,1)
If above is 0, return a random number in range [a,mid] using recursion
else return a random number in range [mid+1, b] using recursion
The working 'C' code is as follows.
int random(int a, int b)
{
if(a == b)
return a;
int c = RANDOM(0,1); // Returns 0 or 1 with probability 0.5
int mid = a + (b-a)/2;
if(c == 0)
return random(a, mid);
else
return random(mid + 1, b);
}
If you have a RNG that returns {0, 1} with equal probability, you can easily create a RNG that returns numbers {0, 2^n} with equal probability.
To do this you just use your original RNG n times and get a binary number like 0010110111. Each of the numbers are (from 0 to 2^n) are equally likely.
Now it is easy to get a RNG from a to b, where b - a = 2^n. You just create a previous RNG and add a to it.
Now the last question is what should you do if b-a is not 2^n?
Good thing that you have to do almost nothing. Relying on rejection sampling technique. It tells you that if you have a big set and have a RNG over that set and need to select an element from a subset of this set, you can just keep selecting an element from a bigger set and discarding them till they exist in your subset.
So all you do, is find b-a and find the first n such that b-a <= 2^n. Then using rejection sampling till you picked an element smaller b-a. Than you just add a.
Selecting without any weights (equal probabilities) is beautifully described here.
I was wondering if there is a way to convert this approach to a weighted one.
I am also interested in other approaches as well.
Update: Sampling without replacement
If the sampling is with replacement, you can use this algorithm (implemented here in Python):
import random
items = [(10, "low"),
(100, "mid"),
(890, "large")]
def weighted_sample(items, n):
total = float(sum(w for w, v in items))
i = 0
w, v = items[0]
while n:
x = total * (1 - random.random() ** (1.0 / n))
total -= x
while x > w:
x -= w
i += 1
w, v = items[i]
w -= x
yield v
n -= 1
This is O(n + m) where m is the number of items.
Why does this work? It is based on the following algorithm:
def n_random_numbers_decreasing(v, n):
"""Like reversed(sorted(v * random() for i in range(n))),
but faster because we avoid sorting."""
while n:
v *= random.random() ** (1.0 / n)
yield v
n -= 1
The function weighted_sample is just this algorithm fused with a walk of the items list to pick out the items selected by those random numbers.
This in turn works because the probability that n random numbers 0..v will all happen to be less than z is P = (z/v)n. Solve for z, and you get z = vP1/n. Substituting a random number for P picks the largest number with the correct distribution; and we can just repeat the process to select all the other numbers.
If the sampling is without replacement, you can put all the items into a binary heap, where each node caches the total of the weights of all items in that subheap. Building the heap is O(m). Selecting a random item from the heap, respecting the weights, is O(log m). Removing that item and updating the cached totals is also O(log m). So you can pick n items in O(m + n log m) time.
(Note: "weight" here means that every time an element is selected, the remaining possibilities are chosen with probability proportional to their weights. It does not mean that elements appear in the output with a likelihood proportional to their weights.)
Here's an implementation of that, plentifully commented:
import random
class Node:
# Each node in the heap has a weight, value, and total weight.
# The total weight, self.tw, is self.w plus the weight of any children.
__slots__ = ['w', 'v', 'tw']
def __init__(self, w, v, tw):
self.w, self.v, self.tw = w, v, tw
def rws_heap(items):
# h is the heap. It's like a binary tree that lives in an array.
# It has a Node for each pair in `items`. h[1] is the root. Each
# other Node h[i] has a parent at h[i>>1]. Each node has up to 2
# children, h[i<<1] and h[(i<<1)+1]. To get this nice simple
# arithmetic, we have to leave h[0] vacant.
h = [None] # leave h[0] vacant
for w, v in items:
h.append(Node(w, v, w))
for i in range(len(h) - 1, 1, -1): # total up the tws
h[i>>1].tw += h[i].tw # add h[i]'s total to its parent
return h
def rws_heap_pop(h):
gas = h[1].tw * random.random() # start with a random amount of gas
i = 1 # start driving at the root
while gas >= h[i].w: # while we have enough gas to get past node i:
gas -= h[i].w # drive past node i
i <<= 1 # move to first child
if gas >= h[i].tw: # if we have enough gas:
gas -= h[i].tw # drive past first child and descendants
i += 1 # move to second child
w = h[i].w # out of gas! h[i] is the selected node.
v = h[i].v
h[i].w = 0 # make sure this node isn't chosen again
while i: # fix up total weights
h[i].tw -= w
i >>= 1
return v
def random_weighted_sample_no_replacement(items, n):
heap = rws_heap(items) # just make a heap...
for i in range(n):
yield rws_heap_pop(heap) # and pop n items off it.
If the sampling is with replacement, use the roulette-wheel selection technique (often used in genetic algorithms):
sort the weights
compute the cumulative weights
pick a random number in [0,1]*totalWeight
find the interval in which this number falls into
select the elements with the corresponding interval
repeat k times
If the sampling is without replacement, you can adapt the above technique by removing the selected element from the list after each iteration, then re-normalizing the weights so that their sum is 1 (valid probability distribution function)
I know this is a very old question, but I think there's a neat trick to do this in O(n) time if you apply a little math!
The exponential distribution has two very useful properties.
Given n samples from different exponential distributions with different rate parameters, the probability that a given sample is the minimum is equal to its rate parameter divided by the sum of all rate parameters.
It is "memoryless". So if you already know the minimum, then the probability that any of the remaining elements is the 2nd-to-min is the same as the probability that if the true min were removed (and never generated), that element would have been the new min. This seems obvious, but I think because of some conditional probability issues, it might not be true of other distributions.
Using fact 1, we know that choosing a single element can be done by generating these exponential distribution samples with rate parameter equal to the weight, and then choosing the one with minimum value.
Using fact 2, we know that we don't have to re-generate the exponential samples. Instead, just generate one for each element, and take the k elements with lowest samples.
Finding the lowest k can be done in O(n). Use the Quickselect algorithm to find the k-th element, then simply take another pass through all elements and output all lower than the k-th.
A useful note: if you don't have immediate access to a library to generate exponential distribution samples, it can be easily done by: -ln(rand())/weight
I've done this in Ruby
https://github.com/fl00r/pickup
require 'pickup'
pond = {
"selmon" => 1,
"carp" => 4,
"crucian" => 3,
"herring" => 6,
"sturgeon" => 8,
"gudgeon" => 10,
"minnow" => 20
}
pickup = Pickup.new(pond, uniq: true)
pickup.pick(3)
#=> [ "gudgeon", "herring", "minnow" ]
pickup.pick
#=> "herring"
pickup.pick
#=> "gudgeon"
pickup.pick
#=> "sturgeon"
If you want to generate large arrays of random integers with replacement, you can use piecewise linear interpolation. For example, using NumPy/SciPy:
import numpy
import scipy.interpolate
def weighted_randint(weights, size=None):
"""Given an n-element vector of weights, randomly sample
integers up to n with probabilities proportional to weights"""
n = weights.size
# normalize so that the weights sum to unity
weights = weights / numpy.linalg.norm(weights, 1)
# cumulative sum of weights
cumulative_weights = weights.cumsum()
# piecewise-linear interpolating function whose domain is
# the unit interval and whose range is the integers up to n
f = scipy.interpolate.interp1d(
numpy.hstack((0.0, weights)),
numpy.arange(n + 1), kind='linear')
return f(numpy.random.random(size=size)).astype(int)
This is not effective if you want to sample without replacement.
Here's a Go implementation from geodns:
package foo
import (
"log"
"math/rand"
)
type server struct {
Weight int
data interface{}
}
func foo(servers []server) {
// servers list is already sorted by the Weight attribute
// number of items to pick
max := 4
result := make([]server, max)
sum := 0
for _, r := range servers {
sum += r.Weight
}
for si := 0; si < max; si++ {
n := rand.Intn(sum + 1)
s := 0
for i := range servers {
s += int(servers[i].Weight)
if s >= n {
log.Println("Picked record", i, servers[i])
sum -= servers[i].Weight
result[si] = servers[i]
// remove the server from the list
servers = append(servers[:i], servers[i+1:]...)
break
}
}
}
return result
}
If you want to pick x elements from a weighted set without replacement such that elements are chosen with a probability proportional to their weights:
import random
def weighted_choose_subset(weighted_set, count):
"""Return a random sample of count elements from a weighted set.
weighted_set should be a sequence of tuples of the form
(item, weight), for example: [('a', 1), ('b', 2), ('c', 3)]
Each element from weighted_set shows up at most once in the
result, and the relative likelihood of two particular elements
showing up is equal to the ratio of their weights.
This works as follows:
1.) Line up the items along the number line from [0, the sum
of all weights) such that each item occupies a segment of
length equal to its weight.
2.) Randomly pick a number "start" in the range [0, total
weight / count).
3.) Find all the points "start + n/count" (for all integers n
such that the point is within our segments) and yield the set
containing the items marked by those points.
Note that this implementation may not return each possible
subset. For example, with the input ([('a': 1), ('b': 1),
('c': 1), ('d': 1)], 2), it may only produce the sets ['a',
'c'] and ['b', 'd'], but it will do so such that the weights
are respected.
This implementation only works for nonnegative integral
weights. The highest weight in the input set must be less
than the total weight divided by the count; otherwise it would
be impossible to respect the weights while never returning
that element more than once per invocation.
"""
if count == 0:
return []
total_weight = 0
max_weight = 0
borders = []
for item, weight in weighted_set:
if weight < 0:
raise RuntimeError("All weights must be positive integers")
# Scale up weights so dividing total_weight / count doesn't truncate:
weight *= count
total_weight += weight
borders.append(total_weight)
max_weight = max(max_weight, weight)
step = int(total_weight / count)
if max_weight > step:
raise RuntimeError(
"Each weight must be less than total weight / count")
next_stop = random.randint(0, step - 1)
results = []
current = 0
for i in range(count):
while borders[current] <= next_stop:
current += 1
results.append(weighted_set[current][0])
next_stop += step
return results
In the question you linked to, Kyle's solution would work with a trivial generalization.
Scan the list and sum the total weights. Then the probability to choose an element should be:
1 - (1 - (#needed/(weight left)))/(weight at n). After visiting a node, subtract it's weight from the total. Also, if you need n and have n left, you have to stop explicitly.
You can check that with everything having weight 1, this simplifies to kyle's solution.
Edited: (had to rethink what twice as likely meant)
This one does exactly that with O(n) and no excess memory usage. I believe this is a clever and efficient solution easy to port to any language. The first two lines are just to populate sample data in Drupal.
function getNrandomGuysWithWeight($numitems){
$q = db_query('SELECT id, weight FROM theTableWithTheData');
$q = $q->fetchAll();
$accum = 0;
foreach($q as $r){
$accum += $r->weight;
$r->weight = $accum;
}
$out = array();
while(count($out) < $numitems && count($q)){
$n = rand(0,$accum);
$lessaccum = NULL;
$prevaccum = 0;
$idxrm = 0;
foreach($q as $i=>$r){
if(($lessaccum == NULL) && ($n <= $r->weight)){
$out[] = $r->id;
$lessaccum = $r->weight- $prevaccum;
$accum -= $lessaccum;
$idxrm = $i;
}else if($lessaccum){
$r->weight -= $lessaccum;
}
$prevaccum = $r->weight;
}
unset($q[$idxrm]);
}
return $out;
}
I putting here a simple solution for picking 1 item, you can easily expand it for k items (Java style):
double random = Math.random();
double sum = 0;
for (int i = 0; i < items.length; i++) {
val = items[i];
sum += val.getValue();
if (sum > random) {
selected = val;
break;
}
}
I have implemented an algorithm similar to Jason Orendorff's idea in Rust here. My version additionally supports bulk operations: insert and remove (when you want to remove a bunch of items given by their ids, not through the weighted selection path) from the data structure in O(m + log n) time where m is the number of items to remove and n the number of items in stored.
Sampling wihout replacement with recursion - elegant and very short solution in c#
//how many ways we can choose 4 out of 60 students, so that every time we choose different 4
class Program
{
static void Main(string[] args)
{
int group = 60;
int studentsToChoose = 4;
Console.WriteLine(FindNumberOfStudents(studentsToChoose, group));
}
private static int FindNumberOfStudents(int studentsToChoose, int group)
{
if (studentsToChoose == group || studentsToChoose == 0)
return 1;
return FindNumberOfStudents(studentsToChoose, group - 1) + FindNumberOfStudents(studentsToChoose - 1, group - 1);
}
}
I just spent a few hours trying to get behind the algorithms underlying sampling without replacement out there and this topic is more complex than I initially thought. That's exciting! For the benefit of a future readers (have a good day!) I document my insights here including a ready to use function which respects the given inclusion probabilities further below. A nice and quick mathematical overview of the various methods can be found here: Tillé: Algorithms of sampling with equal or unequal probabilities. For example Jason's method can be found on page 46. The caveat with his method is that the weights are not proportional to the inclusion probabilities as also noted in the document. Actually, the i-th inclusion probabilities can be recursively computed as follows:
def inclusion_probability(i, weights, k):
"""
Computes the inclusion probability of the i-th element
in a randomly sampled k-tuple using Jason's algorithm
(see https://stackoverflow.com/a/2149533/7729124)
"""
if k <= 0: return 0
cum_p = 0
for j, weight in enumerate(weights):
# compute the probability of j being selected considering the weights
p = weight / sum(weights)
if i == j:
# if this is the target element, we don't have to go deeper,
# since we know that i is included
cum_p += p
else:
# if this is not the target element, than we compute the conditional
# inclusion probability of i under the constraint that j is included
cond_i = i if i < j else i-1
cond_weights = weights[:j] + weights[j+1:]
cond_p = inclusion_probability(cond_i, cond_weights, k-1)
cum_p += p * cond_p
return cum_p
And we can check the validity of the function above by comparing
In : for i in range(3): print(i, inclusion_probability(i, [1,2,3], 2))
0 0.41666666666666663
1 0.7333333333333333
2 0.85
to
In : import collections, itertools
In : sample_tester = lambda f: collections.Counter(itertools.chain(*(f() for _ in range(10000))))
In : sample_tester(lambda: random_weighted_sample_no_replacement([(1,'a'),(2,'b'),(3,'c')],2))
Out: Counter({'a': 4198, 'b': 7268, 'c': 8534})
One way - also suggested in the document above - to specify the inclusion probabilities is to compute the weights from them. The whole complexity of the question at hand stems from the fact that one cannot do that directly since one basically has to invert the recursion formula, symbolically I claim this is impossible. Numerically it can be done using all kind of methods, e.g. Newton's method. However the complexity of inverting the Jacobian using plain Python becomes unbearable quickly, I really recommend looking into numpy.random.choice in this case.
Luckily there is method using plain Python which might or might not be sufficiently performant for your purposes, it works great if there aren't that many different weights. You can find the algorithm on page 75&76. It works by splitting up the sampling process into parts with the same inclusion probabilities, i.e. we can use random.sample again! I am not going to explain the principle here since the basics are nicely presented on page 69. Here is the code with hopefully a sufficient amount of comments:
def sample_no_replacement_exact(items, k, best_effort=False, random_=None, ε=1e-9):
"""
Returns a random sample of k elements from items, where items is a list of
tuples (weight, element). The inclusion probability of an element in the
final sample is given by
k * weight / sum(weights).
Note that the function raises if a inclusion probability cannot be
satisfied, e.g the following call is obviously illegal:
sample_no_replacement_exact([(1,'a'),(2,'b')],2)
Since selecting two elements means selecting both all the time,
'b' cannot be selected twice as often as 'a'. In general it can be hard to
spot if the weights are illegal and the function does *not* always raise
an exception in that case. To remedy the situation you can pass
best_effort=True which redistributes the inclusion probability mass
if necessary. Note that the inclusion probabilities will change
if deemed necessary.
The algorithm is based on the splitting procedure on page 75/76 in:
http://www.eustat.eus/productosServicios/52.1_Unequal_prob_sampling.pdf
Additional information can be found here:
https://stackoverflow.com/questions/2140787/
:param items: list of tuples of type weight,element
:param k: length of resulting sample
:param best_effort: fix inclusion probabilities if necessary,
(optional, defaults to False)
:param random_: random module to use (optional, defaults to the
standard random module)
:param ε: fuzziness parameter when testing for zero in the context
of floating point arithmetic (optional, defaults to 1e-9)
:return: random sample set of size k
:exception: throws ValueError in case of bad parameters,
throws AssertionError in case of algorithmic impossibilities
"""
# random_ defaults to the random submodule
if not random_:
random_ = random
# special case empty return set
if k <= 0:
return set()
if k > len(items):
raise ValueError("resulting tuple length exceeds number of elements (k > n)")
# sort items by weight
items = sorted(items, key=lambda item: item[0])
# extract the weights and elements
weights, elements = list(zip(*items))
# compute the inclusion probabilities (short: π) of the elements
scaling_factor = k / sum(weights)
π = [scaling_factor * weight for weight in weights]
# in case of best_effort: if a inclusion probability exceeds 1,
# try to rebalance the probabilities such that:
# a) no probability exceeds 1,
# b) the probabilities still sum to k, and
# c) the probability masses flow from top to bottom:
# [0.2, 0.3, 1.5] -> [0.2, 0.8, 1]
# (remember that π is sorted)
if best_effort and π[-1] > 1 + ε:
# probability mass we still we have to distribute
debt = 0.
for i in reversed(range(len(π))):
if π[i] > 1.:
# an 'offender', take away excess
debt += π[i] - 1.
π[i] = 1.
else:
# case π[i] < 1, i.e. 'save' element
# maximum we can transfer from debt to π[i] and still not
# exceed 1 is computed by the minimum of:
# a) 1 - π[i], and
# b) debt
max_transfer = min(debt, 1. - π[i])
debt -= max_transfer
π[i] += max_transfer
assert debt < ε, "best effort rebalancing failed (impossible)"
# make sure we are talking about probabilities
if any(not (0 - ε <= π_i <= 1 + ε) for π_i in π):
raise ValueError("inclusion probabilities not satisfiable: {}" \
.format(list(zip(π, elements))))
# special case equal probabilities
# (up to fuzziness parameter, remember that π is sorted)
if π[-1] < π[0] + ε:
return set(random_.sample(elements, k))
# compute the two possible lambda values, see formula 7 on page 75
# (remember that π is sorted)
λ1 = π[0] * len(π) / k
λ2 = (1 - π[-1]) * len(π) / (len(π) - k)
λ = min(λ1, λ2)
# there are two cases now, see also page 69
# CASE 1
# with probability λ we are in the equal probability case
# where all elements have the same inclusion probability
if random_.random() < λ:
return set(random_.sample(elements, k))
# CASE 2:
# with probability 1-λ we are in the case of a new sample without
# replacement problem which is strictly simpler,
# it has the following new probabilities (see page 75, π^{(2)}):
new_π = [
(π_i - λ * k / len(π))
/
(1 - λ)
for π_i in π
]
new_items = list(zip(new_π, elements))
# the first few probabilities might be 0, remove them
# NOTE: we make sure that floating point issues do not arise
# by using the fuzziness parameter
while new_items and new_items[0][0] < ε:
new_items = new_items[1:]
# the last few probabilities might be 1, remove them and mark them as selected
# NOTE: we make sure that floating point issues do not arise
# by using the fuzziness parameter
selected_elements = set()
while new_items and new_items[-1][0] > 1 - ε:
selected_elements.add(new_items[-1][1])
new_items = new_items[:-1]
# the algorithm reduces the length of the sample problem,
# it is guaranteed that:
# if λ = λ1: the first item has probability 0
# if λ = λ2: the last item has probability 1
assert len(new_items) < len(items), "problem was not simplified (impossible)"
# recursive call with the simpler sample problem
# NOTE: we have to make sure that the selected elements are included
return sample_no_replacement_exact(
new_items,
k - len(selected_elements),
best_effort=best_effort,
random_=random_,
ε=ε
) | selected_elements
Example:
In : sample_no_replacement_exact([(1,'a'),(2,'b'),(3,'c')],2)
Out: {'b', 'c'}
In : import collections, itertools
In : sample_tester = lambda f: collections.Counter(itertools.chain(*(f() for _ in range(10000))))
In : sample_tester(lambda: sample_no_replacement_exact([(1,'a'),(2,'b'),(3,'c'),(4,'d')],2))
Out: Counter({'a': 2048, 'b': 4051, 'c': 5979, 'd': 7922})
The weights sum up to 10, hence the inclusion probabilities compute to: a → 20%, b → 40%, c → 60%, d → 80%. (Sum: 200% = k.) It works!
Just one word of caution for the productive use of this function, it can be very hard to spot illegal inputs for the weights. An obvious illegal example is
In: sample_no_replacement_exact([(1,'a'),(2,'b')],2)
ValueError: inclusion probabilities not satisfiable: [(0.6666666666666666, 'a'), (1.3333333333333333, 'b')]
b cannot appear twice as often as a since both have to be always be selected. There are more subtle examples. To avoid an exception in production just use best_effort=True, which rebalances the inclusion probability mass such that we have always a valid distribution. Obviously this might change the inclusion probabilities.
I used a associative map (weight,object). for example:
{
(10,"low"),
(100,"mid"),
(10000,"large")
}
total=10110
peek a random number between 0 and 'total' and iterate over the keys until this number fits in a given range.