When I use Visual Studio 2008 on my XP, everything is fine. But when I use the same on my Vista, I always get this error message when compiling my Visual C++ project. How to fix this?
1>Project : error PRJ0050: Failed to register output. Please try enabling Per-user Redirection or register the component from a command prompt with elevated permissions.
Try launching visual studio with "Run as administrator" options. (Right-click->Run as administrator)
If that doesn't work, run dependency walker (depends.exe) on your DLL to see if anything is missing and try registering from an elevated command prompt using:
regsvr32 mydll.dll
regsvr32.exe should give more information about the failure.
I came across the same issue. Lines of investigation included User account controls, Disable Registration and missing Dependencies.
My issue was resolved when looking into output registration. Go to: Properties-> Linker -> General -> Register Output. Set this to No. You will need to do this for debug and release configurations.
This fixed my problem.
Related
I was installing Visual Studio-Community 2015, and I got the error (0x80070643), also known as Team Explorer Fails. The installer runs for a while, and then outputs this: (Screenshot) I have used microsoft repair tools, reinstalled the redistributables, checked the hash, (fine) and run a SFC scan, (fine). I have been searching everywhere, yet I am to have found a solution. Here is the log, (shortened, because it is massive): (Error Log)
That error code is generic in that it just means "Fatal error during installation"
You need the installation log of the particular MSI that failed.
Do you have that already? Look in your temporary directory (i.e. just type in %TEMP% in the windows explorer address bar and hit enter) for something like "dd_vs_version info_vs_teamExplorerCore.log"
If that's not there, you might be able to manually execute the MSI yourself and capture a log:
From a command prompt (ideally elevated) you could run the command:
msiexec /l*v "%TEMP%\teamexplorer.log" /i "*full installer path*packages\TeamExplorer\Core\vs_teamExplorerCore.msi" MSIFASTINSTALL="7" USING_EXUIH="1"
You need to update that command so that the path to the MSI is correct. If you've downloaded the ISO, then it will be in there; otherwise, while you're running the installer, you can probably find it under the package cache, e.g. C:\ProgramData\Package Cache{48992F68-BEE6-35D8-89AC-6A81406F1096}v14.0.24712 looking at the log.
Using a tool like Void Tools Everything will make it easy to find the MSI and logs amongst a sea of temporary folders and caches.
I have Windows 7, 64-bit.
I'm trying to register a .dll (comdlg32.dll) using regsvr32. But I get an error that says the dll is read but the DLLRegistryServer entry point is not found.
I have run the command under both System32 and SysWOW64 and I have run my commands with "Run As Administrator".
My old MSComDlg.CommonDialog component is no longer working with 64-bit.
comdlg32.dll is not a COM DLL and cannot be registered.
One way to confirm this for yourself is to run this command:
dumpbin /exports comdlg32.dll
You'll see that comdlg32.dll doesn't contain a DllRegisterServer method. Hence RegSvr32.exe won't work.
That's your answer.
ComDlg32.dll is a a system component. (exists in both c:\windows\system32 and c:\windows\syswow64) Trying to replace it or override any registration with an older version could corrupt the rest of Windows.
I can help more, but I need to know what MSComDlg.CommonDialog is. What does it do and how is it supposed to work? And what version of ComDlg32.dll are you trying to register (and where did you get it)?
comdlg32.dll is not really a COM dll (you can't register it).
What you need is comdlg32.ocx which contains the MSComDlg.CommonDialog COM class (and indeed relies on comdlg32.dll to work). Once you get ahold on a comdlg32.ocx, then you will be able to do regsvr32 comdlg32.ocx.
Registering DLL for Fundsite
Outdated or missing comdlg32.ocx runtime library can be the problem of causing this error.
Make sure comdlg32.ocx file is not corrupted otherwise Download the File comdlg32.ocx (~60 Kb Zip).
Download the file and extract the comdlg32.ocx to your the Windows\System32 folder or Windows\SysWOW64. In my case i started with Windows\System32 but it didn’t work at my end, so I again saved in Windows\SysWOW64.
Type following command from Start, Run dialog:“c:\windows>System32\regsvr32 Comdlg32.ocx “ or “c:\windows>SysWOW64\regsvr32 Comdlg32.ocx ”
Now Comdlg.ocx File is register and next step is to register the DLL
Copy the Fundsite.Text.Encoding. dll into .Net Framework folder for 64bit on below path
C:\Windows\Microsoft.NET\Framework64\v2.0.50727
Then on command prompt and go to directory C:\Windows\Microsoft.NET\Framework64\v2.0.50727 and then run the following command as shown below.
This will register the dll successfully.
C:\Windows\Microsoft.net\framework64\v2.0.50727>regasm "Dll Name".dll
Have you unistalled your Internet Explorer?
I did, and I had the same issues, if so, you have to:
Reactivate IE (Control Panel -- Programs and Features -- Turn Windows features on or off).
restarting the computer
(important!) running Windows Update to get all available updates for Microsoft Explorer
restarting the computer (again)
Finally it works!
I have faced the same issue with COMDLG32.OCX and MSFLXGRD.OCX in Windows 10 and Visual Studio 2010. It's an MFC application.
Then I downloaded its zip file from the google after extracting copy them at following paths:
C:\Windows\System32 (*For 32-bit machine*)
C:\Windows\SysWOW64 (*For 64-bit machine*)
Then run Command Prompt as an Administrator then run the following commands:
For Windows 64-bit systems c:\windows\SysWOW64\ regsvr32 comdlg32.ocx
c:\windows\SysWOW64\regsvr32 msflxgrd.ocx (My machine is 64-bit configuration)
For Windows 32-bit systems c:\windows\System32\ regsvr32 comdlg32.ocx
c:\windows\System32\regsvr32 msflxgrd.ocx
On successfully updation of the above cmds it shows succeed message.
Information about missing entry point error installing legacy VB6 compiled applications on Windows 10 which I hope could be useful to someone.
Missing OCX files can be found in the "OS\System folder" of the Visual Basic 6.0 installer package.
Today I copied the relevant OCX file (from our network) to the local computer
And then I typed the commands below, as administrator, which normally work to register it.
cd \windows\syswow64
regsvr32.exe /u mscomctl.ocx
regsvr32.exe /i mscomctl.ocx
(add the path to the locally copied file for the /i command)
However today I got errors from both these regsvr32.exe commands.
The second error was giving the DllImport missing entry point error which is similar to the error mentioned by the original poster.
To resolve, one of the things I tried was leaving out the switch -
regsvr32.exe mscomctl.ocx
To my surprise it then said it was successful.
To confirm, the application started up properly afterwards.
SOLUTION OF Regsvr32: DllRegisterServer entry point was not found,
Go to systemdrive(generally c:)\system32 and search file "Regsvr32.exe"
Right click and click in properties and go to security tab and click in advanced button.
Click in owner tab and click edit and select administrators and click ok.
Click in permissions
Click in change permissions.
Choose administrators and click edit and put tick on full control and click ok.
Similarly, choose SYSTEM and edit and put tick on full control and click ok and click in other dialog box which are opened.
Now .dll files can be registered and error don't come, you should re-install any software whose dll files was not registered during installation.
I also had the similar problem while registering myinfo.dll file in windows 7. Following work for me:
Create a short cut on your desktop
C:\Windows\System32\regsvr32.exe c:\windows\system32\myinfo.dll
right click on the short cut just created and select as Run as administrator.
i am trying to add an assembly to the GAC but the error indicates that "Failure adding assembly to the cache: Administrator permissions are needed to use the selected options. Use an administrator ommand prompt to complete these tasks."
I am using Windows XP SP3 and user account type is Administrator. Please refer to the image below.
TIA
http://i.stack.imgur.com/TZXpc.png
You are administrator on your machine but you don't run the visual studio command prompt (or cmd.exe) as an admin ...
I was able to solve my problem by additional commands via command prompt
C:\WINDOWS\system32>runas /user:computerName\administrator cmd
I am having an issue generating resources in VS.Net 2010, windows 7 64bit. It am able to compile the solution in Visual studio. But when I try to compile the solution in command prompt using msbuild, it fails generating the resources.
I went through the below link and find a solution to get it compiled in command prompt using msbuild.
http://blogs.msdn.com/b/visualstudio/archive/2010/06/19/resgen-exe-error-an-attempt-was-made-to-load-a-program-with-an-incorrect-format.aspx
I used option 2 from the above article.
Before compiling in command prompt I have to execute the below two commands.
CorFlags /32BIT+ /Force Resgen.exe
set RESGENTOOLARCHITECTURE=Managed32Bit
And after finishing the compilation I have to execute the below remove 32 bit command. Other wise it fails in visual studio.
CorFlags /32BIT- /Force Resgen.exe
One weird thing is non of my team members are having any issue with this. I only have the problem.
Could you please let me know why it's only me?
Also any other permanent solution if you have, with out running the above commands again and again.
Thanks in Advance
Sometimes it has issues with the privileges.
Just make sure that you have tried running your command prompt with full privileges.
i.e. Run as administrator
I have created a simple vc++ console application and try to print "Hello World". I am using Windows Server 2003 machine.
When I try to build this project I got the error as Error: spawning cmd.exe
How do I fix this?
Check if cmd.exe is in <Path> environment variable?
I just did a small test by removing the %SystemRoot%\system32 from path environment variable and I got the same problem what you are facing.
Error 4 Error spawning
'cmd.exe'. Project SEH
If it is the path issue then try adding below to Projects and Solutions -> VC++ Directories:
$(SystemRoot)\System32
If you get error like this
Just open Tools –> Options –> Projects and Solutions –> VC++ Directories
and add these lines :
$(SystemRoot)\System32
$(SystemRoot)
$(SystemRoot)\System32\wbem
http://www.interact-sw.co.uk/iangblog/2005/09/12/cmdspawnerror
yes i hav found where the proble.
I unable to locate path of cmd.exe
so
go to visualstudio tools->options->projects and ->vc++ directories and specify ($SystemRoot)/system32 then it working fine.
Are you running on Vista? Could this be a case of needing to run Visual Studio as Administrator?
I believe cmd.exe is not runnable by a non administrative user by default on Windows Server 2003, so I would check its permissions. That of course assumes you are not running it as Administrator already.
Yep. (Another weird windows error)
Projects and Solutions -> VC++ Directories -> Executable Files
Add $(SystemRoot)\System32
it works
It was giving error for me because cmd.exe was not accessible with the current user.
What I did to solve this problem :
Close current Visual Studio.
Reopen Visual Studio by right clicking on visual studio and select 'Run as administrator'
Now run The project.
Why It works
To access cmd.exe application must have privilege to run this. It doesn't have permission to access this and hence it works next time when you tries to access it normally(without running application as Administrator)
Operating System
Windows 7