I'm trying to put together the terminal command so I can ssh to a friends iPhone and copy his sms.db file to my device. I'm using mobile terminal.
This is what I've put together so far.
scp root#IPHONE_IP_ADDRESS:directory_of_file directory_where_file_is_copied_on_my_device
scp root#192.168.1.102:/private/var/mobile/Library/SMS/sms.db /var
I'm then asked for password, I enter it and I get this.
/var/sms.db: Permission Denied
Can someone tell me whats needed or what my mistake is? Thank you!
you need to setup the permissions properly (chmod) OR use a different folder with the appropriate permissions/rights.
Related
I am new to Macs and I am trying to run some interesting stats on my iMessages using the code runner extension on VSCode. I've been following this post: https://towardsdatascience.com/heres-how-you-can-access-your-entire-imessage-history-on-your-mac-f8878276c6e9
However, when I run the line conn = sqlite3.connect('/Users/<username>/Library/Messages/chat.db')
I get the error sqlite3.OperationalError: unable to open database file
Based off what I can tell my issue is that VScode doesn't have the right permissions to access the ~/Library/Messages folder and possibly the chat.db as well. First, I ran ls -l on Library and the result is drwx---rwx for Messages. So I tried to use both chmod a+rwx Messages and sudo chmod a+rwx Messages to open permissions to everything but got the error chmod: Unable to change file mode on Messages: Operation not permitted both times.
Am I doing something wrong and/or is there a better way to do this? Or is it just not possible to change the permissions of this folder?
After some more creative searching I discovered that it was an Issue with Mojave's System Integrity Protection (SIP) and can be solved by giving the desired apps full disk access in Settings>Security&Privacy>Privacy>FullDiskAccess.
Solution found here
I installed Wireshark and during the installation it showed an error but the installation itself completed. When I ran the program and tried to capture packets on my network, it showed this error:
I'm new to mac so i don't even know how to properly ask.
Could someone help me?
According to User: gmale's answer on ask.wireshark.org, he solved his problem in this way and I'm sure that it could solve yours as well. It says:
1- Open Terminal
To see your exact user name (for me that was AliGht)
2- Type 'whoami'
3- execute the following commands:
cd /dev
sudo chown AliGht:admin bp*
and enter your computer password:
4- now type this command:
ls -la | grep bp
The last command will display a list of files such as:
5- Make sure all of them have your user name and admin as the user/group. For some reason, the last one didn't get assigned properly so I had to run the command:
sudo chown AliGht:admin bpf4
so the last command fixed my problem as you see in the last image:
Done!
If your WireShark is open then close it and open it again.
All credits of this tutorial goes to user gmale on ask.wireshark.org,
If you want to open WireShark always as administrator then take a look to another post which I created a shortcut for it via Applescript, and this is the only way which you can open the WireShark always as administrator even when you turn off/on your mac.
I don't know how to solve this problem, but if you want a temporary fix, you can use the following command:
$ sudo /Applications/Wireshark.app/Contents/MacOS/Wireshark
Wireshark provides the solution itself, along with the explanation of weird secrets:
add your user to the group "access_bpf" by commanding
sudo dseditgroup -o edit -a `whoami` -t user access_bpf
then launch Wireshark's script
sudo "/Library/Application Support/Wireshark/ChmodBPF/ChmodBPF";
That's all, because (as the script explains):
# Unfortunately, macOS's devfs is based on the old FreeBSD
# one, not the current one, so there's no way to configure it
# to create BPF devices with particular owners or groups. BPF
# devices on macOS are also non-cloning, that is they can
# be created on demand at any time. This startup item will
# pre-create a number of BPF devices, then make them owned by
# the access_bpf group, with permissions rw-rw----, so that
# anybody in the access_bpf group can use programs that capture
# or send raw packets.
If you want to open WireShark always as administrator I suggest to use AppleScript:
Open AppleScript: By pressing cmd+space and write AppleScript Editor in the Spotlight Search as picture below:
Then from File --> Choose NEW
In the open window write:
do shell script "/Applications/Wireshark.app/Contents/MacOS/Wireshark" ¬
with administrator privileges user name "username" password "password"
Change the "username" and "password" with yours. If you don't know your username in terminal write "whoami" to see your username, password is your computer password!.
Mine is look like this:
Now export your script as Application, by going to --> File --> Export , and change File Format to Application write a name for your file and Save it on your desktop like following pictures:
DONE now run your App from Desktop, and by this way your WireShark runs always by Admin Permission.
I have faced the same problem in MacOS High Sierra (v10.13.6). I have clean-up all dependency files and folders but nothing works for me.
Using the terminal, if I run the following command then it is working -
sudo chmod o+r /dev/bpf*
sudo /Applications/Wireshark.app/Contents/MacOS/Wireshark
This should work.
Run the application from the terminal with the following command:
User$ **sudo Wireshark**
Wireshark should open and packet capture should work then.
Was having same issue with install and run permissions etc. Attempted a few of the above mentioned fixes and although they would come back with the desired result program still would not run properly even with uninstall/install in addition.Getting a bit overwhelmed with it not working after several remedies being attempted I came to one that was super simple and worked -
I simply set up/checked log in as root user. Here you can enable/disable root user account, enable log in account and change root password. So I just switched profiles from my Admin account to the Root account. (I am honestly not sure if its safe to do it this way, so thinking many of you have far more knowledge on this than me I'd appreciate your comments on that!) Also my understanding is that you cannot properly run sudo commands if root account is enabled - So probably just tuning it off if it were on would suffice, but I wanted a quick and easy install at that point. The steps are really easy:
support.apple.com/en-us/HT204012
Then just switch user accounts to root -Log in with "other" then type root and your password.
Now just install Wireshark and it should install and run properly!
**I don't think I would stay in root account after install.
Hope maybe this will help some!
I got same issue and then notice below document provide solution already.
https://www.wireshark.org/docs/wsug_html_chunked/ChBuildInstallOSXInstall.html
2.5. Installing Wireshark under macOS
The official macOS packages are distributed as disk images (.dmg) containing the application bundle. To install Wireshark simply open the disk image and drag Wireshark to your /Applications folder.
In order to capture packets, you must install the “ChmodBPF” launch daemon. You can do so by opening the Install ChmodBPF.pkg file in the Wireshark .dmg or from Wireshark iself by opening Wireshark → About Wireshark selecting the “Folders” tab, and double-clicking “macOS Extras”.
The installer package includes Wireshark along with ChmodBPF and system path packages. See the included Read me first.html file for more details.
I do not want to modify my folder permissions on my system device files like the accepted answer, but I was able to get permissions by opening Wireshark like this:
sudo /Applications/Wireshark.app/Contents/MacOS/Wireshark
Bonus, you can add an alias to your ~/.zshrc:
alias ws="sudo /Applications/Wireshark.app/Contents/MacOS/Wireshark"
Now execute the file: (or you can open a new terminal window)
source ~/.zshrc
Open wireshark with super user permissions:
ws
I am new to Vagrant and get the following error on vagrant up or vagrant ssh:
The private key to connect to this box via SSH has invalid permissions
set on it. The permissions of the private key should be set to 0600, otherwise SSH will
ignore the key. Vagrant tried to do this automatically for you but failed. Please set the
permissions on the following file to 0600 and then try running this command again:
[...]/.vagrant/machines/default/virtualbox/private_key
I have run:
$ sudo chmod 666 [...]/.vagrant/machines/default/virtualbox/private_key
I also tried (600, 777) but still get the same error.
Please can someone tell me what is wrong and how to fix it?
I just had this issue, and I worked around it moving the private_key file to another place, changing its permission, and then creating a symbolic link at the original place.
So,
$ mv [...]/.vagrant/machines/default/virtualbox/private_key /some/path/where/you/can/change/permissions
$ ln -s /some/path/where/you/can/change/permissions [...]/.vagrant/machines/default/virtualbox/private_key
If you're using the Windows Subsystem for Linux (WSL), this error can occur when you're trying to vagrant up in a directory that is outside the user's home directory.
From the Vagrant docs:
If a Vagrant project directory is not within the user's home directory on the Windows system, certain actions that include permission checks may fail (like vagrant ssh). When accessing Vagrant projects outside the WSL Vagrant will skip these permission checks when the project path is within the path defined in the VAGRANT_WSL_WINDOWS_ACCESS_USER_HOME_PATH environment variable.
Changing the VAGRANT_WSL_WINDOWS_ACCESS_USER_HOME_PATH to the current working directory (or a directory above it) can fix this. For example, if your project is in /mnt/c/www, then set the environment variable accordingly:
export VAGRANT_WSL_WINDOWS_ACCESS_USER_HOME_PATH="/mnt/c/www"
I got the same error now. The problem happened because i was trying to do vagrant up in an NTFS partition, just like the error message tell me.
So i created an directory link in my ext4 partition and an simbloc link in my NTFS to solve this. Works Fine now!
Thanks!
I had this same problem and turns out chmod seems to be working fine but is not actually changing permissions, my files where at an NTFS partition, try changing them to an ext4 or similar.
Got this error using otto (which layers on vagrant)
It is def filesystem related, have a fat partition to allow use with windows (used to, no longer). When the permissions couldn't be set on the partition I just copied the whole directory over to my user directory (as I always should have).
Was using git so I just reset to head to get back to my starting place... re-ran:
otto compile
otto dev
up and running now.
So I installed a LAMP on a Google Cloud instance with debain wheezy7. Everything is working fine but I am not able to work the ftp. I am following this tutorial by digital ocean
I am stuck at this last step where I need to make vsftpd allow the user to write outside the chroot file.
The error is get is
hetunandu_gmail_com#lamp:~$ mkdir /root/hetunandu/files
mkdir: cannot create directory /root/hetunandu/files': Permission denied
Then when i use sudo with it i get this error
hetunandu_gmail_com#lamp:~$ sudo mkdir /root/hetunandu/files
mkdir: cannot create directory /root/hetunandu/files': No such file or directory
Where do I go from here?
Also I dont know how to get my username and password setup for FTP
I followed the tutorial and could not replicate your issue. I initially got "Permission denied" but you can circumvent this by running:
$ sudo su
and then
$ mkdir -p /root/$USER/files
Why not use /home/$USER ? not sure why you want to create the folders under /root.
As for your second question, regarding the username and password, I am not sure I understand. From the Developers Console > Compute Engine > VM Instances > click SSH and that should log you in with root privileges. then you can create all the users you want:
$ sudo adduser test_user
Please don't use FTP as it's an insecure clear-text protocol which will let others see your password and easily get access your instance, read/modify/delete your files, etc.
Instead, you should use secure protocols such as SCP or SFTP with public key authentication.
Here are some options to transfer files to/from your GCE VM instance:
sftp CLI tool, as described in this answer
gcloud compute copy-files, as described in this answer
WinSCP with SFTP
I need to be able mount SAMBA (SMB sharing) from terminal, for MAC OS versions (10.7). Is there a way to use mount_smbfs with keychain so I don't get prompt the username/password or have to add it to the command? I'm quite new to this so any help would be appreciated.
Check out man nsmb.conf. This is a configuration file that should be located at ~/Library/Preferences/nsmb.conf (or potentially at /etc/nsmb.conf) and allows you to store configuration details in there, like passwords. It's not the keychain, and thus not encrypted, but it saves from having to put the password in the command.