I have a visual studio 2010 project done in VB.net and i have around 45 variables in the application settings. The one you set in the properties.settings. Now i m having a similar project and i wanna copy the settings variables to this project. Not sure how to proceed with this.
what i did is tried to copy the auto generated code for the settings into that project and it didnt work out well. I am not even sure how to google this out and tried the following.
copying application settings from one project to another in visual studio
moving application settings between visual studio projects
Both of this didnt get what i wanted and am actually out of clue on what to search for this.
So is there a way to directly copy the settings from one project to another project.
All I did was grab the physical Settings.Designer.vb and Settings.settings files found in the "My Project" folder of your applicaton (assuming it's a windows App and not web) and copied/replaced the existing settings files in the new project.
Did a rebuild of new project and errors kicked back but that was just the desinger code referencing the old project name. Corrected by replacing the old project name with the new one and voila, worked.
HTH
Dave
Related
Visual Studio seems to consist of a single solution file (*.sln) along with one or more project files (a C# project would have the *.csproj extension).
I have been playing around with a console application that parses existing directory entries to create solution files with the associated project files.
It works, but every time I run into a new project here at work I find myself spending a week or more debugging my console project so that it can churn out a solution for that particular work project.
Is there something out there already that can create a VS solution out of an existing file structure?
As you can tell from my screen capture below, these projects are nested very deep, so it would take a very long time to do this with the apps folder below with the "by mouse" technique in the Visual Studio IDE.
I created the custom console application that is posted in this post:
https://stackoverflow.com/a/22153536/153923
I invite others to contribute how they approached this solution, though.
So, I found out today that this feature already exists in Visual Studio.
Link 1: How to: Create a Project from Existing Code Files
Link 2: How to: Create a Project from Existing Code Files
Basically, though, it says this (just in case the MSDN links get changed or deleted):
You can create a Visual Studio project from an existing app—for example, an app that you obtained from an online source. Project and solution files are created on your computer and the other relevant files are added. A project can be created from Visual C++, Visual Basic, or Visual C# code files.
Security note Security Note
We recommend that you determine the trustworthiness of existing code files before you import them into Visual Studio, because Visual Studio will execute some of the code in a fully trusted process when you open the newly created project.
To create a project from existing code files
On the menu bar, choose File, New, Project From Existing Code.
The Create New Project from Existing Code Files wizard opens.
Use the wizard to specify the details of the existing code files that will be added to the project and the application that will be created when you build the project.
Another good answer was given by cbp in Visual Studio: Create a web application from existing code:
--
OK I figured it out. It's weird, but the following steps will work:
Open fresh copy of Visual Studio
File->New Project, select Web Application
Use the following settings:
Name: Website (this is the name of the existing folder with the website files in it)
Location: C:\Temp\ (anywhere will do for now)
Solution Name: TheProject (name of the existing project's root folder)
Check "Create directory for solution"
Delete the auto-created Default, Global and Web.config files
Save All and close Visual Studio
In Windows Explorer, copy the new folder on top of the existing folder so that the files are merged.
Double click on the sln file to open Visual Studio again.
Select "Show all files" (at the top of Solution Explorer)
Right click on any files or folders you want to add and select Include in Project.
Great idea!
So I have a handful of Visual Studio projects that I need to move to another computer. Is it as simple as a copy and paste or will that mess something up? Both machines will have the same version of Visual Studio installed, so that shouldn't be an issue.
Is there an export function that I've overlooked?
If the Visual Studio version is the same, you can just copy the project folder.
Till the time you are moving your solution file and associated files you should be good.
In case you are using any source control update your solution from there.
Hope you have the same VS version and any addon frameworks you have
You can directly copy the project to the projects folder. This worked perfectly for Visual C++ projects for me (and also some other projects). But when I copied my Cordova App from one PC to the other (Both had Visual Studio 2015), I wasn't able to open the project. Whenever I tried to open the project, trying both the ways - directly from the Project file and the open option in Visual Studio, it at first opened but when I tried to open a file, it just got hung and didn't respond.
This problem may occur because Cordova apps have some configuration files that might be different for different PCs. I am not sure that this is the reason for the problem.
A solution that I used was that I created a new Project and copied the files to the project folders (excluding the configuration files).
Can you save the file to cloud? if so then you could potentially upload the file to cloud and download the file to the new
I have an issue. We are upgrading to VS 2012 at work. When we open a VS 2010 project Visual Studio converts the project. This is fine, because VS 2010 can still use the project (yay microsoft). However, there is a \Backup folder created in the solution directory. Is this being created as part of the migration? Is there any way to control it?
The reason I ask is that the process that makes this folder copies web.config files into the folder. If you then try to build the solution (these are MVC projects), we get a "It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS." error. The cause is that there is a web.config file in a subfolder instead of the root folder. We did not make and do not want this change, and cannot figure out how to control it. Deleting the Backup\Web.config file fixes the error. Renaming it from web.config to web.config.bak fixes the problem.
I don't really want to have to personally open and convert every single project, and don't want random people bumping into this problem. Any idea how to either stop VS from creating the Backup folder, or how to make it create them in the my documents studio folder etc? I can't find any setting to control this and can't find any good info.
By chance, are you using the MvcBuildViews property to pre-compile your views at build time? If so, this is why you're encountering this (since it does the pre-compile in the same directory, it doesn't filter out any of the files below the project directory).
Note that you will also encounter this issue if you use the Publish feature for this project. Publish copies the web.config under your intermediate build output directory (by default, obj/) before and after applying web.config transforms.
The good news is that in VS2012, or in VS2010 with the latest Azure SDK installed, pre-compile is now supported for Web Application Projects (including MVC). These settings are currently in the project properties, under the Package/Publish Web tab.
(this doesn't directly address your question about the Backup folder, but it was too long for a comment.)
There is no way to control it that I found. We had to go ahead and run through and convert every project to 2012 and delete the backup folders to prevent any other team from running into it.
I have some problem in visual studio.Ok here is the scenario
first i add an existing project to my project in visual studio,and after that i tried to compile and run and it works properly...and then i exit the visual studio. and copy the folder or the visual studio solutions into my laptop.after that i open the visual solutions in my laptop after the visual studio loads,the project that i add before is greyed out and empty...can you help me on this please how can i see back my project that i add before.
When you add an existing project to a solution, you're adding a link. You didn't copy the actual project, you just copied the link, which shows as empty on your laptop.
Right-click on the project and look at the properties, you should see the location. This should show you the problem.
You won't be able to recover that project without going back to the source, you don't have the code on your laptop.
-t.
Do you copy the project off your portable drive to your hardrive? Sometimes copying it off external drives has solved that issue for me.
I created a C# project and added it to source control (mercurial). I can edit files in VS, commit it and push it using TortoiseHg. It goes to the server. When some one pulls they get the files.
In my visual studio I added a folder and a file inside that folder. I used TortoiseHg and it saw the new file in the new folder. I committed it and pushed it.
However, now someone pulled the latest code from the server - and they got the new file (it is visible through windows explorer), but when they open the solution in VS, they don't see the file.
Does someone have an idea what is wrong here? or things I should check? Thank you for the help.
P.S. I have visual studio 2010 express (so I can't use the VisualHg plugin).
Visual Studio caches changes to the solution and project until an explicit save or a build. In your comment:
In my visual studio I added a folder and a file inside that folder. I used TortoiseHg and it saw the new file in the new folder. I committed it and pushed it.
I see that an updated .sln or .vcproj file was not mentioned and checked in. Did you see an update to either of these files via TortoiseHg? If not, make sure to build or save your project after a change like this.
Did you make sure that the Visual Studio Project File or Solution file is being updated and committed?
VS solution contains projects and each project select managed files by metadata(***.vcproj file). It's not the way include all files from root directory.
So, your co-workers can see new added files by in following two ways.
1) share project file(***.vcproj)
2) manually add files in each person's VS instance.