when i type text in radeditor and apply font and font style and color to the text and then export to rtf and save the file and open that file all formatting that made with text like font,font size,color is not in that file. And font is set to the times new Roman.
this thing also happens with radeditor export to rtf demo on telerik site Try
http://demos.telerik.com/aspnet-ajax/editor/examples/rtfexport/defaultcs.aspx
RadEditor uses two different free libraries to provide Import to RTF and Export to RTF features.
The first one used to provide RFT to HTML importation is available in this CodeProject's article: http://www.codeproject.com/KB/recipes/RtfConverter.aspx.
The library used for HTML to RTF exportation is available here http://www.codeproject.com/KB/recipes/RtfConverter.aspx.
As you can see both libraries are written by different developers and they are not fully compatible with each other.
For your convenience I prepared a list of know limitations of the Import and Export features of both libraries:
RFT to HTML (Import)
bold - supported. I was able to export bold formatting from the provided by you Bold.rtf file.
italic - supported
underline - supported
foreground and background colors - supported
table elements - unsupported
images- unsupported
indentations - unsupported
HTML to RTF (export)
bold - supported.
italic - supported
underline - unsupported
foreground and background colors - unsupported
table elements - partially supported - table borders are not exported
images- unsupported
indentations - supported
The unsupported scenarios are hard for development and require more time for implementations and testing. Our development is concentrated currently on producing valid XHTML content and the import and export problems are logged with medium priority in our ToDo list. That is why we could not provide firm estimate for when the required features will be available.
Please note that good RTF import and export tools are very expensive. That is why if you are currently not satisfied with the offered by RadEditor RTF functionality, you can search in Internet for another free or paid RTF to HTML importation and HTML to RTF exportation tools and we will help you to integrate them with RadEditor.
Related
Following the instruction in this link ( https://github.com/EllisLab/CodeIgniter/wiki/PDF-generation-using-dompdf ), I always encounter an error when opening the pdf file created. The error message is:"Cannot extract embedded font 'TradeGothicLT-CondEighteen'.Some characters may not display or print correctly. " and when i click OK, the pdf displays black background and when i start highlighting the body, it captures the text but text are in black font-color. what should I do to get rid of this error?
There may be something wrong with your font cache, located at dompdf/lib/fonts/dompdf_font_family_cache.php (though the exact file name depends on your release and whether you have loaded fonts). This file tells dompdf what fonts are available for use in the PDF. If this file references a font that isn't actually available you can run into major issues on viewing. You may need to re-load your font files. Take a look at the Unicode how-to for an overview of using embedded fonts. This document hasn't been updated to reflect changes implemented in dompdf 0.6.0 beta 3, but the information is still pertinent.
In looking for a straightforward WYSIWYG editor for Markdown code, I am not finding a comparible UI to that of CkEditor, TinyMCE, ect.
Specifically, the Markdown "WYSIWYG" editors that are often recommended (such as posts like this ) are not pure WYSIWYG editors in the sense that users either still write raw Markdown ( MarkItUp ) or go to the other extreme of having in-line editing without standard controls ( Hallo ).
I need something in-between.
I'm looking for a Markdown editor that looks and functions like a stripped down CkEditor text box, and that accepts and outputs Markdown. There should be a toolbar with a minimum set of formatting options (B, I, U, lists, ect), and the text entry area should show the converted Markdown, not the raw code. There should be a Source button that will allow users to edit the raw Markdown, but even that is optional. Ex:
I get the reason for Markdown/wiki, ect - the security it offers. I don't mind entering raw code like here at SE, but my users are not geeks and do not find this enjoyable. They don't want to see * * * ___ and spaces mixed in with their text. They are used to "Word" style editing, and are most productive in that environment.
So - is there a truly integrated WYSIWYG editor for Markdown? I'm writing in a PHP, so something that I can invoke with a class would be perfect.
Sept 23, 2015 Update
CKEditor now has a Markdown addon that does this exact thing. The addon project is hosted on github.
Screenshots:
Apr 13, 2015 Update
Someone professing to develop CKEditor says that the appearance of CommonMark is a game changer, and we could possibly see a proper markup interface for CKEditor (read comments for the full story).
Feb 6, 2015 Update
CKEditor now comes with a plugin that outputs (and accepts as input) BBCode.
Demo: http://ckeditor.com/demo#bbcode
SimpleMDE, a newcomer, may be the answer. I've been searching for something just like this for a month now. I'm surprised that this does not show up higher in search results. I had to go through a notice on lepture/editor to find this.
I was researching in this subject the other day and I haven't found any decent WYSIWYG editor with Markdown output. In fact, first you have to have to create a WYSIWG Markdown editor is WYSIWG HTML editor and there are just few of them that are usable on the market.
There's a chance that you'll be able to create dataProcessor for CKEditor that will change HTML editor into Markdown editor. We've got a plugin for BBCode that works like this (check out http://nightly-v4.ckeditor.com/3737/samples/bbcode.html).
All you have to do is implement this interface http://nightly-v4.ckeditor.com/ckeditor_api/#!/api/CKEDITOR.dataProcessor. If you check BBCode plugin's code you'll see some hacks and tricks, because unfortunately current CKEditor's architecture isn't ready (yet) to create such a data processor. However, I believe that if you want to provide only few styling options you should be able to implement Markdown support pretty quickly.
EDIT Sept 23, 2015
CKEditor now has a Markdown addon that does this exact thing. The addon project is hosted on github.
Screenshots:
As posted in my Feb 6, 2015 update, CKEditor now includes plugins that allow BBCode input and output.
A demo is available here: http://ckeditor.com/demo#bbcode
EDIT Apr 13, 2015:
Someone professing to develop CKEditor says that the appearance of CommonMark is a game changer, and we could possibly see a proper markup interface for CKEditor (read comments for the full story).
Pen is a new (active as of 2014) WYSIWYG editor that outputs Markdown.
It's not perfect—I've had issues with pasting HTML there—but it works.
Edit: Sorry! It doesn't output Markdown. Walery Strauch pointed out in the comments that the Markdown formatting signs I saw were actually CSS pseudo element rules:
Still, I'll leave it here as an option since some people upvoted this answer and it may have been of use to somebody.
I implemented a very simple editor that allows the contents of a <textarea> that contains Markdown to be edited in a WYSIWYG fashion.
I used Hallo. I don't think its web site makes it obvious that it is not itself a Markdown WYSIWYG editor but the demo does forge the path to one.
Hallo allows WYSIWYG editing of the HTML inside a <div>. I used javascript to hide any <textarea> blocks that have a specific wysiwyg CSS class, replacing it with a <div> and copying the contents of the <textarea> into the <div>. The copying runs through Showdown which produces HTML from Markdown.
Another Javascript routine reacts every time the <div> contents change. It copies the contents back into the (now hidden) <textarea>. The content is run through to-markdown to convert from HTML to Markdown.
If the <textarea> is a field in a <form>, then the edited Markdown will be sent to the server when that form is submitted.
The inspiration for this comes from the Hallo Markdown Example, specifically the editor.js file. I used that as a basis for my own script along with hallo.js, showdown.js and to-markdown.js.
My script, wysiwyg.js is a derivative of editor.js from the Hallo Markdown Example. Some points to note:
I use this in a Rails application (not that that matters)
It runs on ready and also on page:load, the latter because Rails uses Turbolinks
It runs on ajaxComplete because I use Ajax for form error reports
There are other dependencies: JQueryUI and Rangy (Rails users can avail of the gems jquery-ui-rails and rangy-rails).
Also Font Awesome is used for the tool bar icons. The version of hallo.js used by the demo is out of date (it uses an old version of Font Awesome) - use hallo.js from GitHub instead.
You only need to add CSS class='wysiwyg' to any <textarea> to enable WYSIWYG on it. The <textarea> should conain Markdown formatted text.
I would expect that wysiwyg.js could be easily adapted to use another editor if you don't like Hallo as long as it works on the HTML in a <div>. There are quite a few to choose from but not all are as lightweight as Hallo.
A smilar piece of work that I found is markdown-html-form. It uses the same Showdown and to-markdown.
I am also looking for a markdown editor that is described at the top of this thread
Have you seen "markdown tools": http://md-wysiwyg.sourceforge.net/
Demo: http://md-wysiwyg.sourceforge.net/cgi-bin/cgi_wysiwyg_test.py/
That seems pretty close to what we are looking for, it does a reasonable job of taking your WYSIWYG rich text and outputting markdown. However it failed on an encoding exception when I pasted in some rich text from a google doc.
I found two which currently seem to be quite popular, active and free but haven't been mentioned yet.
The first one is Toast UI Editor. It supports both modes (WYSIWYG and raw). It has official react and vuejs wrappers.
The second one is ProseMirror which calls itself "a toolkit for building rich-text editors on the web" and it seems to be very flexible and extensive. It also supports both modes.
I'm pretty sure solid unofficial react / vue / angular wrappers for it can be found as well.
I want to write a viewer that convert in-design output format to html5 format and all the user design in adobe indesign can display in browser but i do not know which output is suitable for me, i think i can retrieve all info about the adobe indesign in idml export,but the problem is parsing such XML and display the tags in html5 format,i want to know is it possible the simple way to convert the output format into html5?
is it possible to download the adobe indesign SDK and use its method to this purpose?
You can use in5 to export HTML5 (layout intact) from InDesign.
Full disclosure: I am the creator of in5.
Exporting to EPUB would result in XHTML 1.1. The Epub file that InDesign generates is a zip file, in which you will find a number of files. (At least) one of them is an XHTML file.
XHTML 1.1 would surely be an easier source to use than the idml, however you will have to make sure that the ePub export is good enough to start with (the pages won't come out exactly the same as in InDesign).
Would that be a solution?
EPub export is supported from InDesign CS4 (JavaScript based export option, outside the object model, as I understand it and a built-in export option, part of the object model, from CS5).
You don't mention what version of InDesign you are using. CS5, CS5.5 and CS6 all allow you to export to HTML. The problem is that the HTML is version 4 and it create badly written CSS. What I like to do is to use XML to build my own HTML. Just create a set of HTML5 tags you want to use and then Map the existing Paragraph and Character styles to the XML tags.
When you're done you will have a basic content structure. Then I use the Structure pane to add different elements as needed. You can add Parents or children as you need to right there and then export to XML. When you save the file, just change its name to .HTML and edit the code to remove the one reference to "xml".
It takes a little time, but it is very doable.
I've been having a world of trouble getting Khmer fonts (an Indic script of Cambodia) to render reliably on the web across platforms (Mac, Windows, Linux).
Google web fonts recently added Khmer, which seems like the best bet. However, I have not been successful getting Khmer fonts to work on any Mac or Linux system. I can get them to work on Windows by installing the Khmer Unicode installer from http://khmeros.info but not by just including Google's font in an HTML file.
For example, see this screenshot of the Google web fonts page on a fresh Windows installation. You can see that the default Windows Khmer font (uuuuugly!) is being used instead of Danh's pretty fonts.
I have another test file here: http://dl.dropbox.com/u/634/khmer_test.html. For the first test, you should see something like this for both the web font and the default system font (assuming you have Hanuman installed). I have yet to find a system where both examples work reliably.
Any help would be greatly appreciated. My primary goal is to get this working on a website; a secondary goal is to get Khmer (and other Indic fonts) working in a PDF generator like iText (although I am aware iText itself does not support Indic fonts -- I'm hoping something similar does).
Every Cambodian Windows users are always delete the font name called: KhmerMool and Khmer Kampot. Then they change the default Khmer font in regedit too. You can check at http://thelifeandwork.blogspot.com/2010/01/changing-default-khmer-font-in-windows.html . I'm not sure about Khmer font and other Indic font in PDF. I always have problem when i copy Khmer unicode from PDF to put in OpenOffice or Office Word or LibreOffice.
Khmer Unicode displays on the web, it will always solve now by Google Webfont, please refer to that.
And if you want to have Khmer display in PDF by converting using iText, you can see following post:
Khmer Unicode in iText
http://ask.osify.com/qa/287
They are currently not yet support the display yet.
But, just today I can get it works by modifying the source code of iText (5.5.4-SNAPSHOT) as I just stated in my post: http://ask.osify.com/qa/613, not yet be able to publish since it's just start in testing around.
Updated 13/01/2016
I have added the source code sample for the rendering: http://ask.osify.com/qa/613
The rendering customization with iText for Khmer Unicode added in github: https://github.com/Seuksa/iTextKhmer
I recently installed Adobe Dreamweaver CS4. When I tried to code in javascript, all my code is written in pink font. I checked my Preferences > Code Coloring then choose Javascript. I was surprised to see that it only recognizes 3 types of code: jQuery Identifiers, jQuery Keywords and Methods, jQuery objects. I do code jQuery, but I want to see the previous color coding from my pass Installation (Macromedia Dreamweaver version XX). What can I do to revert or add these native code types so I can set their syntax color. I'm just used to seeing these codes more color-coded. Thanks in advance!
I ask because I have the following options when I open up the JavaScript code coloring options:
JavaScript Bracket
JavaScript Client Keywords
JavaScript Comment
JavaScript Default Text
JavaScript Function Keyword
JavaScript Identifier
JavaScript Native Keywords
JavaScript Number
JavaScript Operator
JavaScript RegExp
JavaScript Reserved Keywords
JavaScript String
I just checked in CS4 and CS5 and those entries are present in both, there are no entries for jQuery. Have you installed an extension that provides jQuery support (at least code coloring)? If you have, then I'd suggest you uninstalling it and the modifications may be reverted.
If you have uninstalled the extension, or if you don't have an extension installed, and the code coloring is still awry, to get back to the original code coloring that's built into Dreamweaver, you may need to perform step 12 on this page:
http://kb2.adobe.com/cps/191/tn_19105.html
For CS4 and CS5, the folder to remove will have a "language" folder that the Configuration folder is within. On my Vista system for CS5, it's at:
C:\Users[username]\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\configuration\