I'm looking for a simple, concise example of using the inotify gem to detect a change to a directory.
It lacks examples.
There's an example in examples/watcher.rb.
That link is to aredridel's repo, since it looks like you linked to aredridel's docs, and aredridel is the one who wrote the example.
One of my projects I have used ruby-inotify for monitoring file creation under specific folder using following code
# frozen_string_literal: true
require 'rb-inotify'
# observe indicate folder, trigger event after
module ObserveFiles
def self.observe
watcher = INotify::Notifier.new
directory = CONFIG['xml_folder'] # folder that want to watch
watcher.watch(directory, :create) do |event|
# do your work where
# here, event.name is created file name
# event.absolute_name file absolute path
end
watcher.run
end
end
Use this code like
ObserveFiles.observe
Hope this will help someone.
Related
My test suite has a cucumber front end with a ruby backend, running the latest version of watir-webdriver and its dependencies atop the latest version of OSX. My cucumber environment is setup to execute in Firefox.
The export feature of our app creates a zip file but to test the import feature, I need the contents of the zip file.
My actual test needs to unpack that zip file and select the individual files in it for use in testing the import feature of our web application.
Can anyone point me to a reference that can help me figure out how to write that?
Based off my experience, you download this file the same way that a normal user might. So first off, you just click the download button or whatever and then can access the file wherever it is and check out its contents.
Assuming the downloads just go to your Downloads folder by default, there is some simple code you can use to select the most recently downloaded item:
fn = Dir.glob("~/Downloads/*.zip").max { |a,b| File.ctime(a) <=> File.ctime(b)}
Then just use the unzip shell command to unzip the file. No reason to add another gem into the mix when you can just use generic shell commands.
`unzip #{fn}`
Then, you'd use Dir.glob again to get the filenames of everything inside the unzipped files folder. Assuming the file was named "thing.zip", you do this:
files = Dir.glob("~/Downloads/thing/*")
If you want to files to be downloaded directly to your project folder, you can try this. This also prevents the popup from asking you if you really want to save the file which is handy. I think this still works but haven't used it in some time. The above stuff works for sure though.
profile = Selenium::WebDriver::Firefox::Profile.new
download_dir = Dir.pwd + "/test_downloads"
profile['browser.download.dir'] = download_dir
profile['browser.helperApps.neverAsk.saveToDisk'] = "application/zip"
b = Watir::Browser.new. :firefox, :profile => profile
I ended up adding the rubyzip gem at https://github.com/rubyzip/rubyzip
the solution is on that link but i modified mine a little bit. I added the following to my common.rb file. see below:
require 'Zip'
def unpack_zip
test_home='/Users/yournamegoeshere/SRC/watir_testing/project files'
sleep(5) #<--manually making time to hit the save download dialog
zip_file_paths = []
Find.find(test_home) do |path|
zip_file_paths << path if path =~ /.*\.zip$/
end
file_name=zip_file_paths[0]
Zip::File.open(file_name) do |zip_file|
# Handle entries one by one
zip_file.each do |entry|
# Extract to file/directory/symlink
puts "Extracting #{entry.name}"
entry.extract(test_home + "/" + entry.name)
# Read into memory
content = entry.get_input_stream.read
end
# Find specific entry
entry = zip_file.glob('*.csv').first
puts entry.get_input_stream.read
end
end
This solution works great!
I am learning unit testing with PHP and am following the TDD session on tutsplus: http://net.tutsplus.com/sessions/test-driven-php/
I have set up a ruby watchr script to run the PHPUnit unit tests every time a file is modified using Susan Buck's script: https://gist.github.com/susanBuck/4335092
I would like to change the ruby script so that in addition to testing a file when it is updated it will test all files that inherit from it. I name my files to indicate inheritance (and to group files) as Parent.php, Parent.Child.php, and Parent.Child.GrandChild.php, etc so the watchr script could just search by name. I just have no idea how to do that.
I would like to change:
watch("Classes/(.*).php") do |match|
run_test %{Tests/#{match[1]}_test.php}
end
to something like:
watch("Classes/(.*).php") do |match|
files = get all classes that inherit from {match[1]} /\b{match[1]}\.(.*)\.php/i
files.each do |file|
run_test %{Tests/{file}_test.php}
end
end
How do I do the search for file names in the directory? Or, is there an easier/better way to accomplish this?
Thanks
EDIT
This is what I ended up with:
watch("#{Library}/(.*/)?(.*).php") do |match|
file_moded(match[1], match[2])
end
def file_moded(path, file)
subclasses = Dir["#{Library}/#{path}#{file}*.php"]
p subclasses
subclasses.each do |file|
test_file = Tests + file.tap{|s| s.slice!(".php")}.tap{|s| s.slice!("#{Library}")} + TestFileEnd
run_test test_file
end
end
Where Library, Tests, and TestFileEnd are values defined at the top of the file. It was also changed so that it will detect changes in subfolders to the application library and load the appropriate test file.
I'm not entirely certain, but i think this will work:
watch("Classes/(.*).php") do |match|
subclasses = Dir["Classes/#{match[1]}*.php"]
filenames = subclasses.map do |file|
file.match(/Classes\/(.*)\.php/)[1]
end
filenames.each do |file|
run_test "Tests/#{file}_test.php"
end
end
It's probably not the cleaneast way, but it should work.
The first line saves all the relative paths to files in the Classes directory beginning with the changed filename in subclasses.
in the map block I use a regex to only get the filename, without any folder names or the .php extensions.
Hope this helps you
From the docs:
Per default Aruba will create a directory tmp/aruba where it performs its file operations.
However, my application uses ENV["HOME"] to create and read a file (~/.foorc), so I need Aruba to use a fake ENV["HOME"].
Do I need to set it in some support-file, or is there a way to tell Aruba to its tmp/aruba for files in ENV["HOME"]?
Here is an excerpt of my code that I am testing (obviously I am testing this with Cucumber/Aruba on a much higher level, but the usage of ENV["HOME"] is what is important here.):
def initialize config_path = ""
if config_path.empty?
#config_path = File.join ENV["HOME"], ".todotxt.cfg"
else
#config_path = config_path
end
if file_exists?
super #config_path
validate
end
end
def file_exists?
File.exists? #config_path
end
#....
ask_to_create unless #config.file_exists?
#...
The Specification:
Scenario: todotxt
Given an empty installation
When I run `todotxt`
Then it should pass with:
"""
Should I create a sample config file? [Y/n]
"""
Looking into the implementation in Aruba itself, I could craft something very similar:
File features/support/aruba.rb, is autoloaded by cucumber and implements the Around hook:
# Temporarily enforce an isolated, fake, homedir.
around do |scenario, block|
#__aruba_original_home = ENV["HOME"]
ENV["HOME"] = File.expand_path(File.join("tmp", "aruba"))
block.call
ENV["HOME"] = #__aruba_original_home
end
From now on, a directory tmp/aruba is used as $HOME.
Note that in aruba, this temporary path is configurable, and that above code does not take that into consideration. It will break when the tmp path is configured elsewhere.
Aruba offers a step for just that:
Given a mocked home directory
I'd like to split my seeds.rb file into multiple sections for ease of maintenance; seed all the A's in a.rb, the B's in b.rb, etc. The separate files are located in the db/ directory with seeds.rb. Each file consists of a bunch of "A.create" or "B.create" calls and I want to call those files from seeds.rb.
I've tried:
include 'a'
include 'b'
and
load 'a.rb'
load 'b.rb'
in my seeds.rb but they don't seem to be processed when I call "rake db:seed". This is probably more of a straight ruby question than a rails question but for completeness I'm using Ruby 1.9.2 and Rails 3 on a Mac.
In ./db/seeds/my_module.rb:
module MyModule
puts "In my_module.rb"
# add code here
end
In ./db/seeds.rb:
require File.expand_path('../seeds/my_module', __FILE__) # the ../ just removes `seeds.rb` filename from the path which is given by __FILE__
p "In seeds.rb"
# add code here
I would propose to create a new db/seeds/ directory where you can place your various seeds file:
db/seeds/01_stuff_that_comes_for_first.rb
db/seeds/02_stuff_that_comes_for_second.rb
...
And then edit your db/seeds.rb file with:
Dir[File.join(Rails.root, 'db', 'seeds', '*.rb')].sort.each { |seed| load seed }
So, you can load your seeds even in the order you prefer - that is often something requested.
This solution was originally proposed by nathanvda in this "duplicated" question.
What is the best way to manage the require paths in a ruby program?
Let me give a basic example, consider a structure like:
\MyProgram
\MyProgram\src\myclass.rb
\MyProgram\test\mytest.rb
If in my test i use require '../src/myclass' then I can only call the test from \MyProgram\test folder, but I want to be able to call it from any path!
The solution I came up with is to define in all source files the following line:
ROOT = "#{File.dirname(__FILE__)}/.." unless defined?(ROOT) and then always use require "#{ROOT}/src/myclass"
Is there a better way to do it?
As of Ruby 1.9 you can use require_relative to do this:
require_relative '../src/myclass'
If you need this for earlier versions you can get it from the extensions gem as per this SO comment.
Here is a slightly modified way to do it:
$LOAD_PATH.unshift File.expand_path(File.join(File.dirname(__FILE__), "..", "src"))
By prepending the path to your source to $LOAD_PATH (aka $:) you don't have to supply the root etc. explicitly when you require your code i.e. require 'myclass'
The same, less noisy IMHO:
$:.unshift File.expand_path("../../src", __FILE__)
require 'myclass'
or just
require File.expand_path "../../src/myclass", __FILE__
Tested with ruby 1.8.7 and 1.9.0 on (Debian) Linux - please tell me if it works on Windows, too.
Why a simpler method (eg. 'use', 'require_relative', or sg like this) isn't built into the standard lib? UPDATE: require_relative is there since 1.9.x
Pathname(__FILE__).dirname.realpath
provides a the absolute path in a dynamic way.
Use following code to require all "rb" files in specific folder (=> Ruby 1.9):
path='../specific_folder/' # relative path from current file to required folder
Dir[File.dirname(__FILE__) + '/'+path+'*.rb'].each do |file|
require_relative path+File.basename(file) # require all files with .rb extension in this folder
end
sris's answer is the standard approach.
Another way would be to package your code as a gem. Then rubygems will take care of making sure your library files are in your path.
This is what I ended up with - a Ruby version of a setenv shell script:
# Read application config
$hConf, $fConf = {}, File.expand_path("../config.rb", __FILE__)
$hConf = File.open($fConf) {|f| eval(f.read)} if File.exist? $fConf
# Application classpath
$: << ($hConf[:appRoot] || File.expand_path("../bin/app", __FILE__))
# Ruby libs
$lib = ($hConf[:rubyLib] || File.expand_path("../bin/lib", __FILE__))
($: << [$lib]).flatten! # lib is string or array, standardize
Then I just need to make sure that this script is called once before anything else, and don't need to touch the individual source files.
I put some options inside a config file, like the location of external (non-gem) libraries:
# Site- and server specific config - location of DB, tmp files etc.
{
:webRoot => "/srv/www/myapp/data",
:rubyLib => "/somewhere/lib",
:tmpDir => "/tmp/myapp"
}
This has been working well for me, and I can reuse the setenv script in multiple projects just by changing the parameters in the config file. A much better alternative than shell scripts, IMO.